Hi, I'm Mike with House on the Mend, and in this video we're going to be reviewing
the Speed Force log splitter. So let's get started.
Now, I'm not paid nor sponsored by Speed Force. They simply reached out to me and
offered to send me this unit for free for my independent review.
So let's unbox it and put it through its paces.
So regardless of what you may have seen in the listing or on the box,
this unit does not come with the hammer that is pictured. So you will need your own.
And even though it was packaged pretty tight with plastic, there are cobwebs all over it,
strangely. All right, now the base is a lot broader than this opening up top.
And I think that's because you have four spots where you can lag bolt or screw the base into
whatever you're setting it on. Now the opening is six and a half inches.
So that's still pretty big. I like the blade and these ribs here that will split the log
outward or assist that for you. So we are looking at an overall height up to this spot
of about 12 and a half inches and an overall height to the blade of nine inches.
Pretty well made. Good looking
construction. I see a couple little spots where they, before they painted, they
shaved down the welding, but most of it looks to be cast iron. So let's see how well that
stands up to the shock of banging on it with a hammer. Before we get started in earnest,
why don't we get a weight on this guy? I have this luggage scale that I like to use.
Just over eight and a half pounds. All right, all the wood you see stacked behind me is really dry.
So let's start off with something pretty simple here. See how we do.
It's barely leaving a mark and whatever that is, let's find something that's already kind of split
on its own. Nothing. Let's find some pine. This is like a cedar. Let's see how it does.
It barely makes a dent in it. All right. All right. This piece is already split
and it won't fit. Darn it. There's one. All right. Well, it took care of that one. The diameter was
about four inches. Once it's split, can we split it again with ease?
Yes. About getting a little bit of kindling. All right. Find something else small like that.
This piece is pretty big, but it's split about halfway through. Can we get this one to go?
Just barely. It does not want to split this piece. There it goes. So this piece is a bit atypical.
It's got a little branch coming off of it and some knurls up here. How much is it going to
struggle with this one? There is a slight crack already brewing in it. So can I set it right on
that crack and get some action? Let's find out. Nope. Barely did anything. What if I set it on the crack?
Starting.
There we go. Now this piece is, what, about four and a half or so
inches in diameter, but it's much longer. Can we get this one going?
There it goes. All right. It's mostly split, but it's starting to wedge itself in this.
So let me break it apart and see if we can split it further.
Good. Well, that initial break on some of these is nearly impossible, but once you get them cracked,
it makes for nice kindling pieces. Oh man, let me tell you, that is not something you can send the
kids out to do for chores. Well, it's afternoon here in Las Vegas, so that means it's really
windy, but hopefully we can get through this without too much wind noise on the microphone.
So after quite a bit of testing, I would have to say that my feelings on this tool
are quite mixed. So I found that anything over four and a half inches in diameter
of the wood I had was nearly impossible to split with this log splitter. Now this is the heaviest
hammer I have. It's like 2.8 pounds, so it's pretty stout and all the weight is up on the top,
and yet still it struggled to split through this wood. Maybe if you have like almost like a mallet
or something that's got a big head of steel, something much heavier, maybe twice the weight
of this, you might have better luck. But when you start getting into much heavier tools,
now you're getting away from being able to be assisted by family members smaller than you. So
I'm six foot 185 pounds, and it took everything I had swinging this hammer on this wood, and it
barely put a little dent in it. So once the log was split, however, then it was much easier to
work with, and I was able to make these small little bits of kindling and could have gone
even smaller. So maybe if you're working a log splitter and you wanted somebody to help you
split things down smaller, this would be a safer alternative. So you don't have somebody swinging
a sharp axe on it, but otherwise if you're working a log splitter like a hydraulic one on your own,
why not just keep going with that? That would be my thoughts on it. Now it's also very possible
that all the wood I had is hardwood, so if you're dealing with something like aspen or birch or pine
that's pretty soft, cottonwood, then you might also have much better results than I did with
this harder wood. But if you're dealing with maple and oak and mesquite, woods like that,
I think you'll be very disappointed in this tool. So if you found this video helpful,
please give it a thumbs up. It really helps the algorithms to start suggesting it to more viewers
like you. Also, please consider subscribing. I work really hard to put out good, quality,
efficient tool review videos, and there's a lot more to come. We're also doing a van build series
that you might be interested in, and it's free and easy. You just log in with your username and
then click subscribe if you're on YouTube. If you're on Rumble, it's follow. It really helps
the channel. I'm going to leave a link to this unit right here in the description below. You
click on the more and it'll open up and there'll be a link for it. That will be an Amazon affiliate
link. So if you click on it and end up making a purchase of any kind, it won't cost you a thing,
but I do get a small reward at the end of the month. I'd like to thank Speed Force for sending
me this unit for my independent review without any preconceived discussion on what I was going to say
nor any demand that they get to view the video ahead of time and make edits, which I've had
companies request before. I refuse all of those requests, by the way. So the fact that they were
able to send me this without any of that preconceived agreement leads me to believe
they're pretty confident in the strength and the quality of the build of this tool,
and I respect them for that. Until next time, thank you for watching.