We recently got a Boss Industrial® 27-ton gas-powered log splitter. After assembling it and using it, here are our impressions.
#logsplitter #logsplitting #firewood #firewoodproduction #bossindustrial
Buy your DFJ T-shirt, Cap, or Coffee Mug at https://www.dirtfarmerjay.com/shop.
Boss Industrial® manufactures heavy-duty yard equipment such as log splitters and chipper shredders. We think these machines are of higher quality than typical equipment found for consumers. We’ll show you what we mean, and you can make your call.
We have one of Boss Industrial®’s electric log splitters, and we’ve been pleased with it. We purchased that well over a year ago, and it’s a strong performer. We featured that splitter on our channel and reviewed it. After seeing the video, the Boss Industrial® Management Team reached out to us and asked if we’d like to review a couple of other pieces of equipment and assist them with assembly videos. We were glad to. Like always, we insist on an agreement where we produce authentic reviews and tell our positive or negative impressions. They readily agreed. They supplied the 27-ton version of their gas engine log splitter.
If you buy this machine unassembled, assembling it will greatly increase your familiarity and understanding of the machine. If you’d like to see how the machine is assembled, you can visit our video here, a companion to the Boss Industrial® owner’s manual.
https://youtu.be/2qz4c_dNuqs
We have a sizable wood processing area, and we’ve used it there and for our friend and neighbor, Mark. Mark is featured in this video as he processes elm for use in his shop’s barrel stove.
There are several things we like about the machine:
1. Good tires and rims.
2. Heavy-duty components and frame. The main spine of the machine is a heavy gauge steel I-beam. It’s heavier than I’ve seen on several other competing models.
3. Dual mode for either horizontal or vertical use.
4. Easy to reach latches to pivot and secure the machine into either mode.
5. Intuitive control handle
6. The 250 cc engine is manufactured by a long-term and reputable company, Briggs and Stratton. That means it is easy to get parts and services should they be needed.
7. Cycle time is 15 seconds - not the fastest out there, but is still very productive
8. 8” splitting wedge and log extractor on the return
9. Auto shut off on return stroke - protects the valve and hydraulic system
10. Trailer hitch and swing down jack stand
Here are some things that we felt could be improved or we wish were different:
1. The log trays could be bigger - larger log portions tend to roll off
2. The ventilated fill cap for the hydraulic reservoir is directly below one of the log trays. This makes it challenging to add fluid
3. It is very difficult to read the hydraulic fluid level on the dipstick - especially when the fluid is fresh
4. The control handle sticks in the forward position from time to time and must be quickly disengaged to avoid stress on the pump
5. Because of the gauge of the materials used in the product, and how the components need to be arranged on the frame, the log splitter is very heavy on the tongue. This makes it difficult to move the machine manually. Since this is the configuration that is needed to have the machine operate, a sizable grip handle on the tool’s tongue would make it easier to move and place
6. While the machine has an integrated fluid filter inside the reservoir tank, I would prefer to have a larger “stand-alone” screw-type filter out in the open
Even with the list of things we’d like to see be different, none or all of them add up to make this machine a poor investment. It’s better built than all the others I typically see in front of farm and ranch supply stores and even big-box home improvement centers.
After using the machine for an afternoon, my friend Mark observed that it was well-built, worked well, and allowed him to quickly and efficiently set aside a firewood store for his winter shop activities. He gave it the “thumbs-up,” and so do we.
You can get machine specifications and purchase one at
https://www.homedepot.com/p/Boss-Industrial-27-Ton-208cc-Horizontal-Vertical-Gas-Log-Splitter-WD27T/314456061
OR
https://boss-industrial.com/products/25-ton-horizontal-vertical-gas-log-splitter?variant=37895835713688
JUST DO IT YOURSELF!
Instagram: https://www.instagram.com/dirtfarmerj
Facebook: https://www.facebook.com/dirtfarmerjay
hey dir farmer J here from dir farmer
j.com recently we got the boss
industrial 27 ton gas powerered log
splitter we put it to work in our wood
lot what do we think about it The Good
the Bad and the Ugly coming right
[Music]
up hey dirt farmer J here from
dirtfarmer j.com my friends at boss
industrial sent us a 27 ton uh log
splitter gas powered log splitter that
we actually did the assembly video that
they use when they send that splitter
out to some of the major retailers where
their assembly teams put those units
together and in that transaction they
provide us the log splitter to allow us
to put it to work and tell you what we
genuinely think and that's always the
arrangement when we do these kind of
things that we'll let you know what we
liked about it what was just fine and
what we thought could have been
Improvement so stick with me but first
what we're going to do is I'm going to
show you this unit at work and my friend
and neighbor Mark has a wood burning
stove in his shop as well he's an
off-road racer they have a car that he
works on a lot during the winter and
uses the wood uh from our wood lot as
well because he comes over and helps us
uh process wood and that's what keeps
his shop warm well Mark is the one that
you're going to see in the video here
putting it together here so here's mark
my friend and neighbor getting ready to
go to work uh at with the log splitter
set up and ready to go one thing I want
to mention very quickly you always want
to work safely around this kind of
equipment notice that Mark is uh geared
up so to speak for the occasion so he
has on a cap glasses he's got some
earbuds in uh gloves long pants all that
sort of thing you don't want to be
messing with these sort of things
without that kind of equipment and the
first thing he's going to do is check
the fuel level make sure that we have
adequate fuel we always start with a
full tank uh and if it's near the end of
the season uh where it's going to be
stored we always have gas stabilizer and
the fuel but here he's got it ready to
go okay now the next thing you're going
to do is look at the fluid reservoir and
make sure that you always have the
hydraulic fluid in the unit at the right
level if it's too much uh the system
over pressurizes and blows it out the
vent don't ask me how I know that but
anyway uh you got to make sure it's at
the right level and if it's too low then
you're going to end up with a problem
where you're not it doesn't have the
adequate amount of um fluid to
pressurize the system so the first thing
right there we do is check that right
after the fuel make sure that's ready to
go now the next thing we're going to do
is the main Beam on this machine uh you
don't want to put grease on it because
it's going to make a awful mess it'll
always be right there uh but we go ahead
and oil it up uh and there's a couple of
ways you can do do that one is to use uh
like bar and chain oil or light oil of
some kind you could use WD40 although
that's not a true lubricant uh per se uh
one of the other things that we use is a
Molly spray and uh you can use that so
the next thing you're going to do after
you make sure the main beam is
lubricated is you'll go ahead and open
the gas valve which is the bottom lever
in the area by the uh carburetor and
then go ahead and uh set the throttle up
and set the choke to closed if the unit
is cold if you've been running it before
you're going to leave the choke open
okay now the next thing you're going to
do is go ahead and pull it get it
started and running so as Mark begins to
do his work here the first thing to
notice that the control handle that
advances and retracts the RAM and the
wedge uh is pretty intuitive you put it
forward towards the direction you want
the ram to move and you pull it back uh
to retract the wed so that's very
intuitive now you'll notice here Mark's
pointing at a little bolt or adjustment
and what this is is a safety when the
ram retracts along with the uh splitter
uh it's going to hit that bolt stop and
force the lever forward stopping it and
what that stops you from doing is
damaging the hydraulic components by
continue to hold it under full load
while it's completely retracted you
would probably blow a hose out ruin the
pump that sort of thing if it just sat
there bearing down bearing down so there
is a control in there that automatically
or a device uh that kicks out the handle
stops it from uh continue to retract and
safeties the equipment so you can see
that in operation now the other thing
that's going to happen here uh is as he
is um splitting a lot of wood here he's
moving along pretty quickly one of the
tricks that Mark does is he looks for a
split that's already developed in the
the short log SE section and he aligns
the wedge with that so automatically
pops it you can see uh this has done a
nice job just pops it out he's able to
extract the bark off of it and in a very
short time he's got a sizable pile of
firewood going now uh something else
that we didn't show on here uh That
season W um wood splitters do is uh if
you split something in half is to stack
them on top of each other and return the
Ram through it if you're using a single
Ram or single wedge uh return the wedge
through it and split it into four pieces
uh for smaller uh kindling uh easier
starting before you got a really hot
fire that you can burn the bigger stuff
so that's another trick that Mark uses
routinely we do out in the wood lot
ongoing now the other thing that is
really good about this unit is it can be
set up for vertical splitting as you see
here and that's easily a accomplished uh
for by pulling a pin uh there's a
horizontal beam latch that you pull that
back raise the whole Ram up so now the
wedge is going down against the pressure
plate at the end and this is extremely
handy for very large logs that you
didn't want to lift up onto a table or
on the log tables um the disadvantage is
you're working very low but it's very
easy to do by pulling the latch on one
end standing it up re-engaging it and uh
then of course when you're done
returning it back to the horizontal mode
so all of that is there and here you can
see the trailer mode once um it's been
put back to the horizontal you wouldn't
do this with it set in the vertical
orientation but the horizontal uh setup
now the unit is entirly towable and as
you can see here Mark's driving off uh
with his um mule type of vehicle his
utility vehicle and now uh returning it
back to its home so it's very toble it's
very nice okay so Mark's overall
impression with this unit is that this
is a great unit it's very well built so
I'm going to give you very quickly 10
things that I really like about the boss
27 ton uh log splitter and then I'm
going to give you some things that I
thought that could enhance as well just
so you can make an informed decision
whether you or not you'd like to
purchase one of these units let's do it
first thing I really like is the tires
and rim they're good Duty uh uh type of
uh rating um carry the weight very
nicely uh look like they'll last for
quite a long time and the bearings in
are very nice I really like that so the
heavy duty components that are on it if
you look at the main frame that's in the
middle uh the ey frame it's an ie beam
that runs down it now I compared this
with some other units at my one of my uh
agricult cural Supply a lot of times
you're using a lighter gauge beam down
the middle or something it's a t beam or
that sort of thing but if you over
pressure for the rating of that main
beam and you bend the beam uh the the
splitter is pretty worthless at that
point I don't think there's much chance
of doing that with this main heavyduty
beam in uh the boss industrial unit
number three love the Dual uh unit you
can do either horizontal or vertical
with those easy change outs I tend to
use it primarily horizontal but I can
see with some of the big rounds I've got
out there I may use that vertical as
well let the ground carry the the load
of the log uh I like the easy latches uh
uh access for pivoting up and down
they're intuitive they're spring-loaded
they lock in place uh it was very easy
to disengage Engage The latches they did
a good job with that uh the control
handle is entirely intuitive within a
minute of using this unit it uh the
muscle memory develops and you're just
running it back and forth and what I
find is that if you're doing a shorter
log than the entire unit uh then I only
retract it partially just enough so that
it reduces the cycle time the next thing
I like is the engine this is a
250c uh engine it's uh manufactured by a
long-term and reputable engine
manufacturer Briggs and Stratton meaning
that you can get parts and you can get
service easily the engine runs very
nicely it starts up cleanly uh in the
time that we've been running it and we
put it through about three or four
splitting sessions it just performs
flawlessly but I like the fact that it's
an easily uh serviceable machine both
parts and service center wise the next
thing the cycle time is about 15 seconds
now for you commercial guys and gals uh
you may say boy that's a long time to
wait uh but a lot of times you're using
that to reposition the next log or as I
mentioned just a few points back um a
lot of times I don't retract the RAM and
the wedge all the way back I just
retract it back far enough for whatever
the bunk is I'm cutting at that point so
uh that reduces that cycle time okay uh
the next thing I like is um it has an 8
in splitting wedge so it's pretty tall
so when you do double stack a couple of
halves uh you can get that four-way
split uh um I don't use a four-way
Splitter on this you can get it I like
just some more control but you can get
that if you did want a horizontal
splitter as well be uh aware that when
you do a four-way split you're putting a
lot of pressure on uh all of the
components because you're having to run
a wedge in four surfaces instead of one
vertical uh through the whole unit or
through the whole bunk so um but that 8
in wedge the other thing is it
automatically as we pointed out ear I
love the the safety that when it comes
back um it automatically will shut off
the control uh and quit trying to
retract so I really like that and the
last thing I really like is the trailer
stand uh arm it allows you to swivel
that down uh and stand the machine out
and it's tripod configuration two tires
and that stand and that once you hitch
it up it's really easy uh to swing that
up out the way and then transport it
I've actually move the splitter uh
around on country roads here a couple
miles uh this is definitely not for out
on Highway use there are no turn signals
or anything like that this is good for
uh moving around locally or on your own
property uh it doesn't have any turn
signals or brake lights or anything like
that and you certainly want want to have
it out on the road but it is really
handy for maneuvering around or putting
in the storage shed uh for the winner
okay those those are the things I really
like now here are some things I thought
uh they can consider updating none of
them are deal breakers but I think
they're nice to have so here we go
number one uh the log tables are a
little bit small so what I found is um
and there's a trade-off with this I'll
explain in just a second um a lot of
times the log is too big it wants to
fall off when you've split it there's
not enough room when you're splitting
the uh the first half it wants to push
the other ones off if those tables were
a little bit bigger uh that would be
handy and they're a little light gauge
they tend to bend a little bit uh but
they do a nice job they're tapered in
they tend to move the logs towards the
splitter uh that's good but I thought
they could have been a little bit bigger
the disadvantage of that is though the
further it out the further is you would
have to stand to the splitter putting a
little bit more strain on your back uh
but I still think it would have been
nice if they're a little bit bigger uh
the vented uh um Reservoir cap uh to
fill the hydraulic fluid is right under
one of those log table uh so it's a
little um hard to access and pull out
and to see it and that sort of thing I
don't know if there could have been a
different place that that could have
been situated um but that is it's just a
little irritation but like I said not a
deal breaker uh the next one um
hydraulic fluid is notoriously hard to
read on a dipstick and we found that was
especially true on this when you have
clean hydraulic fluid and you pull out
the dip stick and it's kind of a golden
color already and the hydraulic fluid is
a golden color boy it is hard to see
where that fluid is on there and if
you're at the right level don't know if
there's anything can be done with that
with different coloration detents
something I don't know but it's just
something that you have to work hard at
to see the correct level the next thing
is um the control lever tends to stick
in the forward position a bit at the end
of a stroke which means you've got to be
on it if it's extended out the whole way
and the wedge is now up by the pressure
plate on the other end it'll sit there
trying to continue to press so you'll
hear the engine bog down the pressure
pump come into you know into play uh
start to uh and you got to be quick to
get that off of there so uh it' been
good if there was some kind of extent on
the other end that shut that or
neutralized it and I don't know how that
could be done but I'm just saying that's
something you have to keep in mind when
you're operating the equipment all right
um because of the gauge of materials
used in this and some of the stuff I've
compared out in front of the big box
stores and the Agricultural Supplies
compared to this unit this is a next or
a couple steps up I wouldn't call it
fully commercial but it's darn close
mark my friend just goes wow this is
really wellmade it's heavy duty there's
a tradeoff on that because of the way
it's laid out and where the components
are it's heavy on the tongue so when you
try to maneuver it around by hand you're
going to get a workout uh you definitely
want to have gloves and all that sort of
thing uh when you're lifting it up uh
you might be able to put an extra handle
on or that sort of thing to make it easy
but it is heavy on the tongue probably
out of necessity lastly the unit has an
integrated hydraulic uh fluid filter
that's inside the tank um and that's
okay my personal preference I like a
standalone filter that would be mounted
somewhere suspended upside down so that
uh it's easy to access uh and that when
you take it off it doesn't I don't like
them inverted the other way cuz when you
unscrew them it's going to FL fluid out
and it'll be a mess but if there had
been a way to suspend that someplace
else I would have liked that but again
it's not a deal killer none of these
things are if you're interested in
acquiring one of these and if you do get
one I think you're going to be very
pleased you can go to boss
industrial.com they're also sold in many
of the big box stores such as Lowe's or
Costco uh you can take a look at those
if you do decide to buy one of these and
buy it
unassembled uh then you can check check
out the video that we produced with boss
industrial that shows you how to put the
unit together it's pretty intuitive uh
and you'll end up with a lot more
familiarity with your machine uh than
you do if you buy it pre-assembled but
if you want to buy it preassembled you
can go to some of these retailers check
them out another thing you may want to
check out is this episode that we did on
Boss industrial's 5in gas powerered wood
chipper this thing is a beast and
allowed us to put a cleanup in a apple
or
and it chewed up that wood like crazy
put out great chips we think you're
going to like it until the next time
this is dirt farmer J with dirt farmr
j.com