136 Video Views·Mar 15, 2025 #woodplaner #woodworking #dewalt The DeWalt® DW735 Planer sports a two-setting switch allowing the wood to be planed at 96 or 179 inches per inch. How well does it work, and is it really useful?
#woodplaner #woodworking #dewalt #dewaltpowertools #dewaltplaner #dewaltdw735
Buy your DFJ T-shirt, Cap, or Coffee Mug at https://www.dirtfarmerjay.com/shop
We love our DeWalt® DW735 13” (330mm) wood planer. It’s a great machine with good features, excellent serviceability, and comfortable controls.
The machine is outfitted with intuitive and useful controls. To see our full walkthrough of all the features of the machine, visit:
https://youtu.be/zvdrO-S92NY
In this episode, we examined the two-speed feed rate switch more closely. The lower setting creates 96 cuts per inch (25mm), and the higher setting creates 179 cuts per inch (25mm). These settings are accomplished via speed changes in the rollers, not in the cutter head rotation rate.
The feed rates can only be changed while the machine is running, and this is clearly labeled under the selection switch. The position number and cuts per inch are also highly visible.
The lower rate is the typical speed for most wood planers. Depending on the condition of the knives, grain direction, and the amount of figure in the wood being planed, a very good surface can be produced using the lower amount of cuts per inch.
Balance must be maintained between productivity and finish. The planer needs to do its job well, but if what is produced creates more work, then time savings and convenience are lost. The planer strikes a good balance, and even a better one, when a helical head, such as the Byrd Shelix® 40-cutter planer head, is installed.
When the machine was run at 179 cuts per inch, the surface was very smooth for both hard and softwoods. Only a touch of sanding would be needed to prepare it for finishing.
The bottom line? The feed rate selection feature is useful and allows you to put a finer finish on stock that is being dimensioned to nearly finished size. The linkages that make the changes in the speed transmission for the rollers are simple and well made. For the price point of the planer, having features like this are a good value.
JUST DO IT YOURSELF!
Buy your DFJ T-Shirt, Cap, or Coffee Mug at https://www.dirtfarmerjay.com/shop
dir farmer J here from dir farmer j.com
DeWalt offers on their
dw735 13inch planers two speeds one and
two one for dimensioning one for
finishing does it really make a
difference let's find
out hey dirt farmer J here from dirt
farer j.com as I said DeWalt offers on
their
dw735 two different feed rates this
model off offers either 96 Cuts per inch
or 179 Cuts per inch a standard planer
runs around 96 to 100 Cuts per inch but
they give you some options and how
important are they so we're going to run
two pieces of stock through a piece of
hardwood Oak and a piece of fur uh
softwood and hardwood and run them on
the two different settings and see what
we get well let's go do it
a
[Music]
[Music]
oh
[Music]
[Music]
[Music]
[Applause]
[Music]
so a couple things to notice on this
number one this is always the speed
change is made whatever one you choose
to use only while the machine is running
you don't do it cold off right now
that's not uh helpful to the machine
it's only done while it's running well
let's look and see what it is doing
something that uh is a
misunderstanding is some people think by
changing this handles it's running it's
changing the cutter speed it's not the
cutter runs at the same rotation rate
RPM uh constantly no matter what this
setting is but what is changing is the
feed rate that is how long the piece of
stock is dwelling under the Cutters per
second and therefore you get two
different cut rates and number two you
get 96 Cuts per inch and over here
you're going to get
179 Cuts per inch so significant
difference all right all right well
let's take a look inside the machine to
see what's going on we'll use the
onboard
[Music]
[Music]
wrench all right so now we've got the
inard of the machine exposed here uh
when you rotate that handle outside and
I don't want to do it all because the
machine's not running you'll see that
what it's doing is running this Rod
right here back and forth and what
that's doing is running into the gearbox
that's on the side of the machine there
nearest you uh that changes the speed uh
through this little transmission of how
fast the feed rollers are rotating so
that's how it works there you go all
right we have the two pieces of stock
let's look very closely here and as you
can see
on hardwood and
softwood um we couldn't get much of a
difference between the two now the
machine is relitively new the knives are
very sharp and this is standard Factory
knives this is not a shelix or a helical
knife but you can see these finished
very very nicely and we ran them side by
side uh using the same depth of cut with
the two different speeds um so does it
make a big difference well not a whole
lot to be honest with you as the knives
wear a bit maybe you're going to see it
more and I would say another reason you
probably didn't see much difference on
this is neither one of these pieces of
stock are highly figured so you weren't
getting tear out or anything like that
but for general purpose remember a
standard planer is what their rough
dimensioning speed is on this and then
they give you another setting where you
can really slow down the feed rate to
get a smoother cut even above that
I think it's a nice feature and it's
probably worthwhile uh to utilize in
different settings where you don't want
a thickness plane a lot and you don't
want to do a lot of surface preparations
afterwards here's something else you
might find to be helpful and here's a
technique with one setup on your table
saw that you can cut all of the joints
to make drawer boxes this is commonly
called the quarter quarter quarter or
half half half technique we'll show you
how to do it you'll love the results and
while you at it check out this other
episode from our catalog that YouTube
thinks is perfect for your interest and
we'd like you to watch it too until the
next time this is dirtfarmer J from
dirtfarmer j.com