Mike from \"House on the Mend\" reviews the Uwant Y100, a portable spot cleaner featuring room temperature, hot water, and steam functions. The device is praised for its versatility in cleaning carpets, shoes, and vehicle upholstery, though it is noted for being loud and having a poorly designed water tank. Overall, it is presented as a powerful upgrade over entry-level competitors.
Hi, I'm Mike with House on the Mend. And in this video, we're
going to be reviewing the Uwant household carpet cleaning
system. Specifically, this is the Y100 model that has the
steam component. So most of these little systems here that
are portable spot cleaners have the cold water only this one has
your typical room temperature water, but it also has hot and
steam and are going to test out all those functions. So in this
video, I'm going to give you a complete overview on all the
components how to set it up, then we're going to test it by
cleaning spots in our household carpet. I am then going to test
the steam function in our shower on my work boots, and my wife's
Crocs, you'll be amazed at that. And then finally, we will finish
up here in my van cleaning these car seats. I'm also going to
show you how to clean it after you're done. There's a cool
little attachment that helps with that. So let's get started.
All right, in the description below, I have put a table of
content. So there's going to be chapters in this video, if you
want to switch to any other part specifically, go ahead and do
that. But here we go with the overview. Nice packaging. All
right, here's the body of the machine, it's turned on its side
so you can see it properly. Let's go over some of the
components. First, you have the carry handle up top, you have
the water tank for both clean water, and the dirty water, it's
split right into the same tank. This handle here is how you
remove that tank, we'll get to that in a moment. You have the
hose with the attachment on top that will go over this area from
here to here is where you wind the hose and it clicks into
place over here. Then we have the cord, it's a nice long
looking cord and it has this strap that's Velcro. And when
you're done with it, you can just Velcro it right to the
handle. And that way you police up your cable. Now turning our
attention to the tank, you simply pull up on it and it
comes right off. This little spout right here is where the
vacuum suction is pulling down. And it's pulling upwards right
here in this crevice, which is pulling the dirty water out of
the hose up and into the dirty water tank. Looking at the top
of the tank, there's just a slight clasp right here on the
front, no button or anything to push if we lift it up. There's a
couple sections I want to go over right here. This is where
your dirty water is coming in. It's being kind of broken up by
this little guy here that looks like vampire teeth. So that that
dirty water goes right down into this area. This is where your
suction is pulling down to create that vacuum. This right
here is a float. So as the dirty water raises, this float lifts
until it gets to the very top. And at that point, it is
blocking off the suction so that you don't run the risk of
overfilling it. It's a nice little feature. This port right
here is rubber, it just peels back and this is where you put
the clean water and where you can put any kind of additive you
want. You want Sens a textile cleaning solution. Let's take a
closer look at the handle here and go over the attachments. So
this trigger right here is what emits the water or steam. This
clip releases the various handles that you put on it. And
that's pretty much it nice and simple. Now if you notice right
here, you can see there's these little rubber grommets. If you
see this picture here, there's actually three spots where
there's these fresh rubber grommets and I'm actually going
put a little bit of silicone grease on them. Now, the most
common handle is this one right here. You have the brush, the
water sprays out of this little protruding spot here into the
front. And then you have the vacuum port right here. Now the
cool thing about this one here is first of all, when it comes
time for cleanup, this easily comes right off and you can
clean this whole area. Now I have noticed that that is common
with modern ones. But our old rug doctor one here that does
not have that functionality. And as a result, you can see how
dirty and dingy it is in there. There's even a little spot right
here. That's a split in the plastic to support it and hair
gets collected right there. So these older ones can get really
dirty. This new feature here is pretty nice. You also have three
different possible brush types. Two are on this one itself, I
can just push in right here and that comes off. If you flip that
over, you get these little rubber bristles. Or this is one
sided. This is what they call the fabric or clothing brush if
you don't want to get real aggressive with something with
these brushes or these little nubs, you can get a little bit
more delicate with this little pad. Next, if you switch to
steam mode, you're going to want to put this little 90 degree
elbow in right here. And then you have one of two choices. If
you want to get into a tight spot, you put this one on and
give it like a little half twist. And that will spray the
steam straight out of the nozzle here. So really concentrated
areas, I have a corner of our shower that I want to try that
one on. Or if you want to also input a scrubbing motion, and
you don't need to get into a tight corner, you can use this
one here goes on and then a very slight turn counterclockwise.
You have the steam port right in the center. And then all around
it, you have very stiff bristle brushes have a spot in our
shower that will also give that one a try. When you're all done
and it's time to clean up. Look at this awesome little feature
here. They have the cleaning port. So all you do is push the
nozzle, it sprays the water and it goes right into the vacuum
area and you can clean out the whole handle and the whole hose
right from here. This little split right here allows air to
come in so you don't cut off the suction by putting it on. That
is so helpful. I just love that. Next, let's go over the dials.
So the first position after off is your standard brush sucking
the water down where you're using room temperature water,
maybe slightly warm. The next switch actually heats the water
to hot for you. Now the cool thing about that is with other
units like this rug doctor, or this one by shark, they each
have these little inlet ports right here and here. And if you
put water in them that is too hot, even your hottest sink
water, pressure will build up in these small tanks, and it will
start to squirt water out of them causing it to leak
everywhere. So the nice thing about this unit is you don't
have to worry about that you can just put warm water into the
tank, then turn it to hot. And as the water comes out, it will
heat it to hot instead of just warm water. So that is a really
cool feature. I can't wait to try out. Finally, we have the
steam feature. So as we turn it to steam, the manual says that
within 30 seconds of hitting the trigger, the water inside of the
tank will be turned into steam and that steam will start
emitting out of whichever head you choose. I can't wait to try
that one as well. All the way down of course is off. Our first
test for the regular setting will be on this little spot
right here. I know that this came from a dog treat recently,
the dog had it in its mouth, came over, laid down, dropped it
for a minute, and the saliva and whatever the coloring is in the
dog treat got right here. So that shouldn't be too bad. It'll
be a great example of something to get with the regular setting.
As always, I want to pre-treat it. So let's start first with
something that's not their product, though I am going to
use their product in a moment. This is just something for car
cleaning made by Turtle Wax. This particular product said to
let it stand for one minute to do its work. So that's passed.
Let's try scrubbing it with the included brush. I'm going to
leave my pen right here because this was the row where the stain
was. Now we'll spray water on it. Look at that. Fantastic. So
straight across was where that dark spot was. And now all we
see is a very clean area here and wet around it. As I feel,
it's definitely not hardly wet at all. So this is doing a great
job of pulling that water out of the carpet. Let's try another
one. This is going to be I think a slightly tougher stain. It's
been here for a lot longer than the dog treat. For this one, I'm
going to use the Uwant cleaning solution. It's diluted one
fluid ounce to 34 ounces of water. This doesn't hold 34
ounces of water. So I have a little less than that. And I am
going to use the hot setting for this. And we'll let that sit for
a little while. Alright, that's been about a minute. Let's
agitate it with the brush. That solutions kind of already taking
care of it. Wow. Let's turn it to hot.
There's hot.
Oh, do you hear that bubbling? Sounds like a coffee maker in
there. Interesting. So you saw it took maybe 10 seconds and
then it got really hot enough to make a difference. So maybe get
a cup or a bowl or something like that to spray into until it
gets hot, but it didn't take long. And that stain, which was
right here is completely gone. Very good. Alright, at the
bottom of our stairs leading into the basement, there's all
these little dots right here. Neither Maverick or I are sure
what they are. What is that? I don't know either. Come on over
here. So I'm really impressed with their solution. Look how
well that does. Well, that's all for today because it's about
five o'clock in the evening. I have dogs and horses to feed.
So let's clean the hose with the included little nozzle here.
So cool. Look at all that dirt it's picking up in there. So
glad I can take that cover off and easily wash it out. I'll
tell you even against a white backdrop, you really can't see
through this kind of smoky plastic. Maybe a little bit that
that's the dirty side. Of course, much easier this way.
Nasty. Look at all that mud down there. Time to test out the
steam function. And my wife does an absolutely amazing job on
this shower. She just cleaned it the other day. But I did find a
couple spots that we can at least try to clean. One's going
to be just with the nozzle right here above the floor in
that corner, see that little bit right there, we're going to
see if we can just spray that clean. And then for the brush,
the brush attachment, right over here, see that little bit of
streaking there where some cleaning product left a little
bit of dirt there, we can try that with the brush attachment.
And then the main thing I'm interested to find out is this
stain right here. This was here when we bought the house. I
think it's some sort of installation product. I don't
know if it's glue or sealant or what that was, but nothing seems
to get it out. And I wonder if we can make any difference
there. So the instructions say to turn it all the way to steam.
And then when you start pulling the trigger, you should wait 30
seconds for steam to actually start emitting out of the nozzle
there. Now, I would have thought since the vacuum isn't going to
come into play that it wouldn't be engaged when you turn it to
steam, but it is.
In this confined space, it is really loud. So I'm going to put
some headphones on before we get started.
Alright, so the nozzle seemed to have zero effect. But once we
put the brush on, it did a pretty good job there in that
corner. Definitely a good job over here and had no effect on
whatever that is on our poor shower floor. Look at my poor
boots. After wiping them down with a wet rag and I treat them
often with leather conditioner, there's still this ingrained dirt
right here on the crease that's just behind the composite toe.
And then all the stitching just has ingrained dirt in it too. I
wonder what the steam function might do with them. Let's find
out. Not much difference once it dried, but then I put some
leather conditioner on it, as you can see here, and it
definitely did pull that obvious dirt line out of the
boots. These crocks used to be white and black, but there's a
lot of iron in our dirt.
I would call that a big win, huh? Impressive. Kind of hard
to see, but here is the water line. So all that steaming of
the shower and my boots and the crocks still left enough to do
another pair of shoes. Thankfully, as hot as that
steamer got, it doesn't affect the bristles at all.
Well, my three areas of concern inside the van were the top of
the driver's seat where there was a spill there and either
side of the seats on the passageway into the front
cockpit area where Maverick, my dog, likes to stand. So I washed
everything, pre-treated all that, and you can see the water
and the dirt coming off. Pretty impressive. And here are the
before and after pictures. Really well done in vehicle
upholstery, as you would imagine. All right, now let's go
over the pros and cons. So in the video, a couple times I
marveled at the cleaning solution. It's excellent. I did
not fast forward that footage where the stains seemed to
disappear before I even turned the machines on. I had
pre-vacuumed every room, as you see here, before spot
cleaning, but still the brush was picking up hair out of the
carpet. So that brush is really good. Now the steamer function
with the brush is outstanding, especially on rubber soles and
crocks. You look at that dirt literally dripping off onto the
towel here from my nasty work boots. Finally, the hot setting
works really good internally, but that brings us to the cons.
The sprayer, as you can see here on the hot setting, it has a
noticeably weak stream. Something about the water
getting hot is causing it to be really weak like that. The smoke
colored container, as I pointed out, is really hard to see the
water levels. I think they should lighten that. The unit
is pretty loud, so I would recommend using some hearing
protection like these ProHear Bluetooth headphones that I
previously reviewed. Finally, as you can see here, you can fit
all of the various attachments in the dirty water portion of
the water tank, but that doesn't do you a lot of good when you're
actually using it. So I wish they would have given you some
sort of inexpensive little mesh bag like this to put the
attachments in so they don't get lost. So if you found this video
helpful, will you please give it a thumbs up? It's really helpful
to the channel. Also, please consider subscribing. I work
really hard to put out very efficient tool reviews. There's
a lot more of those to come. Leave me a comment below if I
forgot anything. I actually did quite a bit of recording, but I
condensed it down to get into about a 20 minute format here. I
can easily post that as an unlisted video and send you the
link if there's something specifically you wanted to see
that I didn't cover. I'd like to thank Uwant for sending me this
model. This upgraded model with the steam is the way to go. I
think it's excellent and it has already replaced our little
shark one that I bought at Walmart for $88 because it's got
so many more features than that. Until next time, thank you for
watching.