We’ve decided to take firewood production around here to the next level. We’ve got a great arborist friend who not only drops by wood chips but a plentiful supply of sizable trunk sections from the area - including hard and softwoods.
We are in the process of cutting sections that can’t be milled for lumber into 16” (41 cm) lengths (called “bucks”), ready for splitting, using the Boss Industrial® ED16T21 Dual Action 16 Ton Electric Log Splitter.
We chose the electric model for convenience and because we have a 20 amp outlet near our wood processing area, along with the required 12 gauge extension cord. This eliminates the annual maintenance tasks that go along with a gas motor. Another key feature is the dual action that works the ram and attached splitter wedge in both directions. So, at the end of one split, the buck is set on the other side of the wedge and the ram is returned home. This reduces cycle time and makes handling of the wood to be split pretty darn efficient!
We paid under $1600 for the unit.
Key specifications for the machine include: 115V, 60 Hz Splitting Force: 16 ton Splitting Length: 20.5” (52 cm) Cycle Time: Feed - 7 seconds, Retract - 6 seconds Wheels/Rubber Tires: 16 x 4.8 x 8 (cm: 41x12x20) Oil Capacity: 4 Gallons (15 liters) Machine Dimensions (LxWxH): 69x40x36 (cm: 175x102x91) Machine Net Weight: 304 lbs., 138 kg
The machine came packed in the best crating I’ve ever received. It had a painted angle iron frame bolted to a substantial plywood pallet, with the entire unit sleeved inside the frame with a beefy cardboard liner.
As we disassembled the crate, every part was well laid out and protected and the instruction manual was easy to access. The listing in the manual corresponded nicely with the parts we unpacked. We began by gathering the tools listed and organizing our parts and workspace. We found that we could use a portion of the steel crate frame to help in assembly. We also used a floor jack to raise one of the heavier assemblies into place so we could bolt it in. We recommend you do as well.
Other than a few errant page number references or seemingly contradictory specifications on the hydraulic oil needed, the manual was very useful, and the pictograms are accurate and easy to reference.
To assemble the unit, we simply followed the steps outlined in the documentation. It went well, and there wasn’t anything or a step that was especially difficult. We had the unit in operation in a afternoon.
When we started it up, it sounded smooth and was relatively quiet. Even so, the satisfying sound of splitting wood quickly became addictive! Having a stroke be about 7 seconds moves along pretty quickly, but not so quickly that you can’t keep your hands safe.
The unit looks beefy, and the fit and finish is really nice. Having a trailer hitch and full tires makes it easy to move around with the yard tractor or by hand, and provides some nice stability.
We do think the log trays are a bit small and light gauge. If they were about 4” (10 cm) wider, that would be nice, but we are doing to build some work tables to put beside the unit, so that will be less of an issue than it is now. The gauge could be better too, as we slightly dented one in the first week of use.
We’ll come back in a year and let you know if our favorable impressions still stand. We anticipate they will, but we’ll give you the actual story then - no matter what it is.
Also, you might be interested in purchasing the optional Model CW-D2 4-way wedge Boss Industrial® offers. It slips over the ED16T21’s dual action main wedge and produces two small and two larger splits of wood. It works well on this unit but tends to bog down a bit on stringy or interlaced wood grain such as elm. Even so, we have found it to be handy.
With this equipment, we are looking forward to having a fully stocked woodshed and a warm shop next winter. Heck, we think we’ll have excess to sell and create a bit of tool money!
Hey, Dirt Farmer Jay here from DirtFarmerJay.com.
We recently bought Boss Industrial's 16-ton dual-action electric log splitter.
It's the model number ED16T21.
We had a good experience getting it here.
We're going to show the unboxing, the assembly, putting it to use, and what we
love and some things we think they could have done differently.
Hey, stay tuned.
We'll tell you all about it.
Hey, Dirt Farmer Jay here from DirtFarmerJay.com.
We love this new log splitter simply because it's allowing us to produce a
lot of firewood for our wood-fired heat unit here in the shop, and it gets
pretty cold where we live, so having a good supply of logs and we have a great
source of hardwood logs that are brought to us, but we needed a way to split it
up, and after a lot of research and wanting to go the electric route versus
gas-fired or gas-powered, what we ended up doing was getting Boss Industrial's
dual-action electric log splitter, and when we say dual-action, it splits both
ways between two pressure plates.
It exerts 16 tons of pressure when it does so, and we got the size that actually
has large enough tires on it that it is towable, which makes it really nice to
move around, both in the neighborhood, off-road, and on our property as well.
There's going to be four sections to this video.
One, we're going to show you the delivery and unboxing.
Number two, we're going to show you the assembly, putting it together, and we'll
aspire to move through that pretty quickly, but giving you enough detail and
referencing back to this reference manual, which is a pretty doggone good
manual, showing you how to put it together so you know what you're getting
into if you get one of these.
Number three, we're going to go ahead and put it in use briefly, and you can
just see it working back and forth through some of the different kinds of
wood here, whether it's pine or conifer, or we get a lot of Chinese elm, which
is very interlaced, and you can kind of see the difference when it does that.
And then fourth, we're just going to give you the good, the bad, and the ugly.
What do we like about it?
What have they got on this you think could have been differently?
What are some things that we're going to do to enhance productivity
and that sort of thing?
So if you'd like, jump forward at any time.
And if you're interested in any of this piece of equipment, you can certainly
go to boss-industrial, www.boss-industrial.com to look up their lineup.
We got the 16 ton, which is just, it's not, it's kind of mid-range, it's
semi-industrial, and does allow you to use a four-way splitter wedge if you
need to, but if you went lower than that in tonnage, you probably wouldn't
want to use that four-way splitter.
But let's go ahead and begin.
Well, we had ordered the unit and at about, oh, 10 days, seven to 10 days,
I forget, somewhere in there, a reasonable amount of time, the truck
showed up and backed up our driveway and the friendly driver got out named
Mike and rolled the, using liftgate delivery, which we requested and they
recommend strongly because it's several hundred pounds.
I say that low hundreds, maybe 300 or 400 pounds, but not something
you just want to drag around.
And so he put it on the pallet jack, brought it down the liftgate,
rolled it into place.
And I got to tell you, this is one of the best packing jobs I have ever seen.
Steel angle, painted, bolted together to make sure the package is shipped
safely with a cardboard liner and it's on a plywood base with some packing blocks.
It was well done.
So the first thing we need to do is start taking off the side braces and
then eventually take off the bolts that held, retained the top end.
And then after that disassembly, we went ahead and took off the crate
top frame, lifted that out.
Now you had four corners sitting up vertical.
We went ahead and removed those.
And that got us down to where we could actually open the box, which is kind
of a bottomless box, down around the cart, excuse me, the plywood base,
but tape shut on the top.
So Dirt Farmer Maggie went ahead and sliced it open.
We opened it back up and in the box, things are packaged very nice, foam wrapped.
They've obviously thought this through really well.
And in fact, when you look in the manual, they actually show, and I have to get to
the page here, the packing manual about how it's packed and how to undo it.
So this is standard operating procedure for them, how it comes to you.
Once we got the box open and the sleeve removed off of it, now you can see some
of the components that are in there.
And we started removing like where the tires and the motor box and parts box and
all that, and we got down to some of the main components, which include the
reservoir, the main beam, the spine, if you will.
And here you can see the motor off on the side of the box packed separately,
and it's really heavy.
So then what we next needed to do was just figure out what tools we needed.
And that is listed right here in the manual of the list of items.
And I'll read them to you very quickly, just in case you're interested.
And they're listed down below in the description as well.
You're going to need two 13 millimeter wrenches, a 16, 17, 18, and 27 millimeter
wrench.
Now, 27 millimeters, a pretty big wrench, like one and a quarter or something like
that.
So I used a big Crescent wrench.
You're going to need a six millimeter Allen wrench, one big Crescent or
adjustable wrench, needle nose pliers, a flathead screwdriver, a soft base hammer.
That's used essentially to line items, but also to put the bearing caps on the
wheels, and then some thread locking compound to keep things secure.
And that's all listed in the manual itself.
But also you can look down, if you're just contemplating this or preparing, you
can look in the description below.
All right.
So once we had that, we went ahead and laid out all of the components and here
they are, just so you can see what's there to get organized, have our magnetized
dishes, our tools are ready to go.
And then we got to work.
All right, to get started, the first thing that needs to be done, and this is
outlined step-by-step in the manual, so we're just following the steps in the
manual, is that you need to attach the trailer tongue assembly to the main beam
or the spine of the machine.
So the first thing you need to do is go ahead and bring down the stand portion
to get it out of the way where the bolts need to go through.
So you move that down, pull out a pin, reinsert it, re-secure it.
And then you need to determine the bolts, see where the bolts are on the spine.
Get those bolts out and loose and then line up the spine or the, yeah, the spine
of the machine, the main beam in line with the tongue of the trailer or trailer
tongue, slide it in and then start inserting the bolts.
And it's a little tricky, but you got to get from both sides and then really secure
them.
They're good lock nuts.
They look like they're heavy duty fasteners.
And if you like, go ahead and put some lock compound on them because the machine
is going to vibrate.
It'll probably be outside quite a bit.
So you work through that process and now you have a sub-assembly of the main spine
along with the tongue of the unit with the hitch unit on the top.
And now you're ready to go to the next section, which is working on the backside
of the machine or the tail and that's attaching the reservoir.
Now, as you can see here, we use some of the frame or the crate as a handy little
work table or one of the wagons that we had.
And so that really worked out very well.
And what that allowed us to do was to lay the beam with the trailer tongue across
and then using a floor jack, raise the reservoir into place and align all the
bolts.
Now, one of the things I want to mention there is the bolts that you need to use
to attach.
And I'm pointing them out here because there are three bolts on each side, but
you don't use the ones nearest the end.
Those are part of the main unit.
You don't undo those.
It's the four, two bolts on each side that are removed.
And then the brackets from the reservoir, the hydraulic oil reservoir and combined
axle unit all gets tied to that.
It's fairly heavy.
It's hard to keep balance.
It wasn't fair to ask dirt farmer Maggie, Kate, come on, lift harder.
How long?
What's the matter?
We just let the floor jack and maybe you've got other ways to do it.
Blocking, concrete block, a bunch of neighbors, something like that to raise it
up in place and then insert the bolts and then tighten them all in place.
So once that is all installed and tightened in, now you're ready to install the wheels.
And here they come in a nice pack, all of the hardware with it, the accessories,
the bearing covers all there.
So we got that out.
And then the next thing you do is ready the tires for installation.
So they have protectors that are pressed in over the bearings and they're
a little bit hard to get out.
I tried to pry them out.
Finally, what I ended up doing is utility knife and slicing them on the side and
then popping them off, being careful not to dislodge the bearings and get grit in
the bearings and the grease because they are pre-greased.
So then you go ahead and slide those on.
We still had the unit on top of the jack.
We slid those on on both sides and then utilizing the instructions on how to
tension and tighten and seat the bearings.
We installed the castle nuts and then the cotter pins to hold the castle nuts in
place. And then finally, we went ahead and installed the wheel bearing covers,
tapping them in with a soft faced hammer.
OK, things are moving along pretty nicely now.
So you actually have a unit that you can roll around because the tires are
installed, the trailer tongue with the stand is all installed.
So now things are not nearly as precarious.
You can get rid of the jack stand.
And now comes time to put on the motor with the hydraulic pump.
It's fairly heavy.
I think it's really well made.
It's machined nicely.
It's a nice looking unit.
The fit and finish is really nice on it.
But you need to install it using the bolts that are indicated in the manual and are
pretty intuitive.
Those because they are going to have a lot of vibration, even though there's lock
fasteners and all that on it.
I just always use thread locking compound on these types of things for insurance.
So go ahead and get that all mounted and lined up, as is good practice when you're
putting this kind of machinery together.
I don't tighten one bolt down.
I tighten them all just a finger tight to get the motor aligned and so you can get all
the holes aligned, keep them loose.
And then when you've got all the bolts in and started and the nuts started nicely and
all that, then you can tighten them up in a cross pattern tightening fashion.
So you're not distorting the plates and all that sort of thing.
It's now time to install the hydraulic hoses that are going to transfer around the
hydraulic fluid from this high pressure pump on the motor that's going to operate the
unit. And what we did, because the hoses are very stiff, they're very substantial, and
we were installing this on a cool late winter day, they were really stiff and hard to
manipulate around.
So we unfastened some of the factory installed couplings, didn't reverse position or
anything, but just made it easier to get the other started and then move them back into
position. So you're going to need to do, there are six fittings total, three hoses, two
on one side, on the pump side.
And you'll see in the manual, there's a whole diagram that points this out, just
showing that on the left side, you have two hoses, both attached to the inlet and outlet
side of the pump on the motor.
And then on the other side, you have the connector to the uptake that is in the
reservoir where all the fluid is going to be.
So all those need to be torqued down per the specification, per the direction here, make
sure they're sealed well.
And of course, after you start up the unit and operate it, you want to look and make
sure that you don't have any leaks that develop.
Okay. Now, there is no fluid in the unit when it shipped, other than what they tested
it with. And so what you want to make sure, do not operate this unit without the oil.
You will void your warranty and screw up your nice, beautiful machine.
So we'll get to that in a moment, what to use.
The last thing you need to do now is install the log trays that go to both sides of the
main beam. And this is pretty straightforward.
There are a set of plates on both sides of the main beam that are tapped ready to accept
the bolts. Pretty intuitive.
You place those on both sides so they're running parallel to the direction of the ram
as it runs back and forth in the wedge.
So those are installed.
And now you've got this and the machine is ready to fill with the right fluid.
Now, this gets a little iffy.
And when we went to multiple supplies, both agricultural supplies and automotive stores,
to find the exact thing, and we could not find exactly what was stated in this manual.
Finally, we settled on what's called an ISO 46 fluid, and it was designated specific for
hydraulic log splitters.
And that's what we've been using.
It's a moderate viscosity and everything seems to be running beautifully.
The machine sounds great.
We don't have it doing any weird sounds or underperforming or anything like that.
It's just doing what it should be doing.
But the information on that is included in here.
But again, I'm just going to say it.
Just be careful.
Don't run your machine until it's filled up.
And then once it's filled up, you need to cycle the machine back and forth about 20 times
with no load to get everything, all the fluid throughout the system and burp out the air,
so to speak, so that you've bled the system.
And the only thing that's remaining is hydraulic fluid, which can properly exert the
pressures it needs to.
So once you're at that stage, we found this machine was really easy to roll out.
It's a nice looking machine.
We're going to have a tarp system to keep it covered and to roll it in in poor weather
and keep it stored very well.
But what we really like about this electric machine, either it runs or it doesn't.
It isn't, you know, you have to get a carburetor and oil changes that way.
Maintenance ongoing.
You do need to change out the hydraulic oil and they recommend a maintenance cycle of
approximately every year.
You can look that up in here.
And that's what we'll do is at the end of every season, we'll drain that oil out after
we put it to work, install new oil, put it away for the winter and then start the fun
all over again once the spring hits.
Or we'll probably do some splitting also in the late fall.
Right now, it is the early days, first couple of days of spring.
So that is coming along here.
I got to tell you, splitting wood is a lot of fun.
So you can see me running the cycle here.
But here is you can just see a little still photo here that I took when I got this set
up and I went out there.
And I got to tell you, it's kind of addictive because when you start splitting, you don't
want to stop. And here's just about, oh, five, 10 minutes worth of splitting some shorts
to begin with, short bucks of wood.
And kind of at the end of the late of the day, you can see the golden sunshine there.
And it was really fun.
So those that's been the unboxing, that's been the assembling, that's showing you the
machine in operation.
We really like the fact that you don't have to wait for it to cycle back before you can
put another log in.
When it comes to rest at one end, now you put a log on this side and you plow back
through and you do that.
So I really like that.
The control handle is well placed where you stand as an operator is easy to work with.
So that kind of thing, how well it runs, how fast it splits, all of that, the fit and finish,
how substantial it feels for this model.
They're all pluses.
So what didn't we like or what are we a little concerned about?
Well, the one thing I don't like is the log trays seem to be a little undersized and they
seem to be a little light gauge.
And just after using it for a couple of weeks, I noticed one of them is dented.
Probably I slammed down a log or too heavy a log on it, but they seem to be a little
undersized.
And if you've got a sizable buck that you're putting through, there doesn't enough room
to set it well.
I like the height that it's at, but I'm probably going to put an infeed table of some
kind where you can preload a bunch of logs and then put all the splits and that way shove
them down to where they're going to go in a storage unit.
Probably do some of that, but those tables seem to be a little bit light.
There's a little bit of the other thing I would say, just a little bit of confusion in the
manual. A couple of places it seems to be contradictory or the page numbers where it
tells you to go to look up something's off a couple of pages.
Minor stuff that you can just get figured out.
I'd say overall so far we're really pleased with this.
One other thing I will notice is that because it is easy somewhat to maneuver around,
sometimes when you're kind of pushing sideways or moving a little bit, it'll tend to
scoot on you a little bit.
But I've already developed muscle memory to kind of overcome that.
I think we're going to be very pleased with this.
Anticipate we will be.
But in all honesty, these are just our initial impressions.
We'll come back to you in a year after we've used it through the both seasons of early
spring and again in late fall and let you know how it's holding up, if we still love it or
if we think there's some problems developing.
And that way you can continue to look there.
I think you're going to really enjoy it.
You know, another thing that everybody needs if they're processing firewood.
Well, check out this video that we produced where you can get a pickeroon.
Some people call it a hookeroon too.
There's a real argument out there about what unit is, but whatever it is, it allows you to
pick up the logs with a handle and swing it in and pick up a log so you don't have to bend
over every time. And check out this other video that YouTube thinks is perfect for your
interest from our catalog.
And we'd like it if you watch it, too.
As for me, I'm going out to splint some more wood.