Thank you to everyone who has been supporting our channel! If you use the link below before you purchase anything on Amazon, we get a royalty for sending you there, thank you!
Our store is located at 139 Caldwell St., Rock Hill, SC 29730.
ladies and gentlemen this is joe's
classic video games back with another
cool pinball repair video for you this
evening
we had a gentleman call us and his space
station pinball machine is acting up
he wanted to bring it down here and have
us fix it we said bring it on buddy
so he brought it down he dropped it off
and we're going to check it out and see
if we can figure out what's going on now
he said that it's mainly everything's
working but it has forgotten its
settings which is going gonna be a
battery issue
and that um
the sounds messed up
so uh
i'll just say from the beginning he's
not a
pinball collector i don't believe so
he's not like a
he just likes to play the game he said
everything works except that but we're
going to check just to make sure
everything works because he might have
missed something
not realizing it but um
we're not going to we're not going to
completely
refurbish the game or anything like that
because he basically just wants to play
and make sound again
so
we'll probably sneak a few repairs in
there that he might not uh even know
about but we'll tell him later
so let's turn it on and see what it does
i believe it just comes up with a big
loud screech
so get your ears ready
it might screech
now on these you know it tells you a
little information on the leds usually
told you about your ears
that's pretty wild
so it is loud i don't know if he just
likes playing it really loud or if it's
messed up
let's see if we can get into the uh
test mode
and see if it will come up and do
anything or if i can turn it down or
anything
see many of these keys fit the front
door
front door has been opened
[Music]
okay so
volume there's a volume knob up in there
[Music]
okay so
here's
this
so that
that humming
is definitely a problem but the hiss was
just where it was turned way up so if it
says adjust failure if you open the door
you've got these three buttons here
one says high score reset
one says auto up
manual down
and one says advance i don't ever
remember if you want auto up or manual
down i think you want auto up to go into
settings manual down i believe
is the uh
test
let's go into settings first
oh yeah the sound sounds like crap
factory setting
you just hit advanced and it'll advance
through all of the
audits and the adjustments so basically
since the batteries have died
it's uh
it's just reset all of its settings
when you get to the end
[Music]
it should go into
attract mode
[Music]
boy it is
common
[Music]
looks like most of the stuff is working
might be a few light bulbs out
[Music]
well that that damn hum is crazy
all right so next thing we're going to
do we're going to take the back bot the
back glass off and see how bad our
battery situation is
what the batteries look like
and uh if there's anything obvious
making the home
so you turn the key it's a william
system 11 and then you can just lift up
on the
translate
and get her out of there
[Music]
well that hum is loud people
oh
so we got a leaky battery
that sucks too because i don't have an
nvram module they make a little chip you
can put in
that makes it where you don't need
batteries but the guy get them from
doesn't have the uh can't get a hold of
the parts right now
got a shortage going on
all right so um
this is the sound board up here
it seems like it's attached pretty good
all right and this the power supply here
seems like it's all screwed in pretty
good
um
you also have sounds created in this
section
sometimes when you got that big hum it's
because there's a screw missing or
something but
i see one missing but it seems like it's
in there pretty
it's good down a little bit but
[Music]
that's interesting
it's really loud and then it calms down
so we'll have to uh
we'll have to see about that but i think
the first thing i'll do is we'll work on
this battery problem here so i'm going
to pull out this main board
and let's see what we can do about this
batteries that's an
obvious first place to start
okay folks so here is the famous
williams system 11 pinball board
they basically combined all kinds of
stuff on one big huge board
so you have the
uh there's the cpa the cpu it's a 6802
this i believe is the ram that we're
talking about let me see
it is a
tc 5516
ap2
so that's the
that's the ram that the batteries are
sending voltage to to retain settings
and high scores
these are the main roms
okay
so this is your
cpu here
okay then you've got the battery section
this is the reset section
so basically when the board boots up
there's a pin on the 6502 that wants to
be held below for a while and then go
high so that they make sure that
everything
kind of starts at the same time and the
power is uh steady
this is the reset section this is the
sound section
like i think
it's confusing one of them does
background sound and the other one does
like call outs and um
and and speech and things like that i
think this is the background sound
section but they may switch some so like
music and stuff may be done on this so
you get two sound roms a sound ram and a
sound cpu
6502
these are uh p
6821s which are pias peripheral
interface adapters
which the 6502 uses to
communicate with inputs and outputs
you have a couple
switches here
these are the solenoids
so all of the coils in the game
okay
these are the switches
the switch rails you know
and of course what i mean is that these
control the solenoids these control the
switches
these control all of the lamps in the
game but not the general illumination
the general illumination is just on when
the power's on so these are the switched
lamps
and so a pinball machine you know has
100 lamps on it or whatever
and then this up here
are the special solenoids we've talked
about those a few times they're
basically solenoids that
oh there's another little thing they're
basically solenoids that
don't need to talk all the way to the
cpu to turn on
so some solenoids
like let's say
a ball lands in a lock
and then there is a coil to shoot the
ball back out of the lock well the way
it works is the ball lands on a switch
the switch wires through the switch
matrix goes through the pia
and talks to the cpu
the cpu then talks through the other pia
which might be this one or something
and tells the solenoid to kick it out of
the
the uh
the uh saucer so the thinking was that
that takes too long
because basically
now i'm not obviously an expert at this
but
the timing basically so it this is a
switch strobe
so it takes a little a second i'll say a
second
colliquily or whatever and it's not
actually a second but it takes it
a a
slash of time
to read the uh the switch
so it takes it a little bit of time for
the switch to actually physically
connect and then it takes a little bit
of time for it to strobe through and
notice that it's connected
and then it then it takes it a little
bit of time
to compare that with whatever
software
program it's running
what should we do if that switch
connects and then it takes a little bit
of time to tell the
solenoid to kick the ball out of the
hole
so there's like a timing thing so if you
have a switch that you want it to react
immediately
these may not be the most effective so
they decided to use these special
solenoids they called it
so on something like a pot bumper for
instance now i don't i don't
know for sure that it's one of the pop
members one of them but you can see
where if the ball hits the switch you
want it to immediately fire you want it
to
really quick
so what it does is the ball hits the
switch which is connected to one of
these solenoids
so it turns it on itself and immediately
fires the solenoid
so instead of the switch going through
the switch matrix to the cpu getting
analyzed and then it telling the
solenoids to fire the switch itself
tells the special solenoid to fire
so it's just kind of a shortcut and then
you also have the displays the displays
are up here where you see all this kind
of burnt looking stuff
so this is a decoder 74 154
and it comes from this pia here i think
both of these run it as well
two or three of them run the actual
displays
this may
this one may do the other the um
there's something weird there basically
they made the board so it could
whenever this came out it was around the
time that alphanumerics
um
[Music]
were kind of changing a little bit so
it's it's got some functionality that
not all of the games use
um
i'm trying to remember what the big
change was
i think when it started
they had two sets of alphanumerics and
two sets of just numerics and then they
changed it to where all four of them
could do alphanumeric something like
that
i don't know but the board can handle
all of it but here's the thing
okay the batteries are right here in a
battery holder and these two
pias
i think it's these two in this one
run the displays this is the connector
to the display
and this is the connector to the sound
board
now the connector to the sound board
you can see the traces run down this way
and you can see the connector to display
the traces run down this way they run
right underneath the battery so if you
get a bunch of corrosion damage
it screws up the displays first
but it may have also screwed up the
sound i don't know but i'm thinking that
we got lucky enough where it didn't
damage anything it looks pretty minor
so
the
the way the best way to do it now
is you can replace this ram
with an nv nvram non-volatile ram so
it's one that doesn't need a battery to
save the settings so you can take this
out put a socket in and then put that
envy ram in there
never need any batteries again
but the guy i get them from
he's out of them right now because
there's some special thing he needs for
it and
there's like a worldwide shortage
because of global supply chain crap you
know
so you can't get it right now so i don't
have any of those in stock right now
i could order one from somebody else but
we're trying to fix this tonight right
um
so uh
i think what i'm gonna do is at the old
way so the old way to do it is you take
the battery holder off and you just
remove it from the board and then you
run two wires and you mount a remote
battery holder off the board right
so we're gonna do that so it's not as
good as the nvram
but it's a little better than this so
we're moving forward maybe the next time
the gentleman brings it back
we'll put the nv ram in
so what i'm going to do is i'm going to
remove this and let's look under it and
see how bad the damage is hopefully
there's none keep your fingers crossed
people i need your help on this one
okay so we got lucky there was no damage
to the board at all i cleaned it up a
little bit
it there was a little bit discolored
so i cleaned it up a little bit and then
i filled the holes in with solder the
reason i do that is just so that if
somebody looks at the board if there's
solder in the holes they can just kind
of tell that someone did that on purpose
you know that there's not something that
fell off the board or something
and this is the where the positive lead
ends up so it connects through the
battery
which has a trace on the back you can
see right there here
through the battery and then another
trace on the back and then that's where
the ground connects
and that's just how these things uh were
designed
so i have mounted two wires
on a long lead
and it comes down to this little thing
little battery holder now why does it
have four spaces when we only need three
it's because
like i said this is old school stuff if
you buy a four one you can put a diode
in here for a board that needs a
blocking diode
so for instance if you're putting it in
a bally
one of their early boards the dash 35 or
the dash 17
they had a rechargeable battery on it
so you need a blocking diode on it so if
you buy a four position one you could
put your three batteries in and then
have them run through a blocking diode
before it goes to the board on a system
11 you don't really need that because
this is the blocking diode it's already
got one
and the purpose of that is that when the
board is at five volts it doesn't try to
recharge double a batteries
so now we've got two bat and two diodes
which won't hurt anything but it'll
lower the voltage a little bit which is
fine because the chip wants about three
volts and we've got four and a half
volts here so
it'll be just fine um but it'd be better
if you had a three position one because
then you could you could mimic exactly
what was on the board
but this will work great um so the next
thing i'm going to do is i'm going to
look into the sound and see if anything
up here is still used to amplify the
sound or anything like that you see
these capacitors missing here those will
be a prime candidate for what might be
making that hum but they're not there
because they don't use it on this this
version of the board so i don't think
there's any capacitors that really have
anything to do with the sound but we'll
check to make sure
so we're looking at the schematics now
keep in mind the sound's working it's
just it's got a big nasty hum in it so
this is on the cpu board this is where
the volume control plugs in
okay
and then one of the connectors goes to
ground and then goes up through a trans
transistor and then you have this cap
which
since it's in line this might be a you
know if if you ended up
missing the sound this might be a good
one to look at
c8
okay
let me come over here to a 1458 i've
seen that in sound sections before i
have no clue what it is
we're just looking for basically
electrolytic caps that might make it
have some kind of ground thing going on
here's one connected ground but it's
it's not an electrolytic
here's c15
also is in line where's you know
basically
information goes through it i
also don't believe that would be it but
we might replace it just for the
just for the giggles
and then here we have c9 which is an
electrolytic and it's 0.1 mic microfarad
so we may change those three but i don't
think that's going to fix it i think the
problem is going to be on the other
board or on the power supply
so let's see if we can find c8 c9 and
c15
so here's the sound section i think this
is an 11c board i believe
not sure i think it's an 11c said at 11
then 11a then 11b then 11c or something
like that this was i think the last
revision of it
so the earlier revisions actually had
the sound amp right here on the board
because this did all of the sound but
then they decided to put the the extra
board that we saw uh to help with the
sound and the amplifications done on it
so if these caps were here and it was
using this sound amp that would almost
certainly be where your problem is
so like a system 11 an earlier board
than this
that might be your problem but here we
have c8
um
there's c15
i'm cc9
c9 where are you
uh
you would think it would be near c8 here
it is c9
yeah
see that's a ceramic cap anyway that's
not going to go bad
i'm not going wood i think what i'll do
is i'll change these two electrolytics
just in case
and then we'll pop it in the machine i
don't think that will fix the sound
and then we will we'll pull the sound
board out and work on it but i think
i think these won't do much but we'll
swap them while we have the board out
just in case
there's other stuff you can do you can
check all the transistors and stuff but
according to the customer everything's
working
what do you think about that
you might be wondering what is this
damaged looking stuff there it's because
of these resistors run real hot this is
for the lamp circuit
that gets some heat going
you see where this is not
this is not
really heat damage it's smoke damage
so these haven't really gotten hot
they've gotten smoke
on them
um
these have definitely gotten hot
all right so i'll swap those two
resistors i mean those two capacitors
and then we'll uh we'll put it back in
and see if it still boots up if it will
save the settings and then we'll mess
with the sound
screwed it all back in put all the
connectors back on i believe i got them
all where they go
that the loud sound again
it sounds better
yeah the hum's gone
the the crazy humming is gone
hmm
let's see why that was
okay so we're going to go into the
settings and we're going to set it on
free play
okay
[Music]
somewhere there is a
setting for free play
we go so when you get to the one you
want to change hit start button
okay and that's all we need to do
comes back
the hum is back
[Music]
i didn't think that would fix it
all right so we've got it uh on free
play now
so let's turn it off
we'll let it sit for a second
yeah we're gonna pull this board out
next cause we look we got some caps here
we can swap
i think that might have more to do with
our hum and if not we can move over here
to this power supply but i don't
[Music]
i don't know it looks like it's been
capped
matter of fact i might have capped it
look how see the
see the uh radials instead of axials
that's one of my uh
signatures
i believe we've known this customer for
years so that we may have worked on this
in the past
my signature i'm not saying that i'm
proud of that i'm just saying that
i never have the axials when i need them
okay we're going to turn it back on and
see if it comes up
uh in audit mode or if i've got the door
open i don't know if that will mess it
up
let me shut the front door
on some games
it will come up in test
if the
front door is open
i don't know if system 11 games are like
that or not
so we're going to act like it's
in somebody's house
the door is locked and they go
people yelling outside
and they go
hey mary beth let's go play the pinball
machine
and she goes oh sure tom and i go
downstairs and turn it on and this
happens
climb right up in free play but it's
humming something horrible
but i think we fixed the setting thing
at least
okay well we got to do it let's pull the
damn
let's pull the damn sound board out of
it
i think that's next there's no way
around it i'm going to pull it out we'll
put it on the board
come on on the table and check it out
so here's their cute little sound board
now
where we were looking the schematics
where it said volume control
it actually instead of plugging the
volume control into the cpu you plug a
little jumper that goes from there
up to here so it kind of off sources it
and then the volume control plugs in
here okay
so you've got let's see if we can
identify any of this stuff
you've got a
ym3012 that always means yamaha yamaha
so i don't know what that's for
but you can bet it's something with
sound especially since we're on the
soundboard
got a big crystal here are you
interested in knowing what speed it runs
at
3.57
it's a 3.57
kds
whatever that means 3.57 though
um
the cpu is a
68b09 by the way the b
is important apparently
so 6809 the b
has something to do with
that clock that crystal we were just
looking at i believe
one needs the crystal and one doesn't or
something like that
and then you have the
6821
pia chip peripheral interface adapter
yamaha 2151 boy that's a great little
chip there now i'm not
a big uh
audiophile so i don't know too much
about them but we were working on a
street fighter pinball machine and this
chip was used in it as well it must be
used in all kinds of stuff
but this chip uh was bad in that one and
so you were missing all your background
sounds so i think we just solved the
mystery about
which board makes the background sound
it has to be this one because of that
synth chip there
ym 2151
again
stands for yamaha
okay
got a regular little 21
2016 ram chip
the rom we have no idea to know we have
no idea what size but
probably a 27 64.
74 175 74139 138
74 10
74 74.
another crystal
interesting
well what's this one for
i don't know
7404 and then that's a 1458 like it was
shown in the schematics another one
and another one that has something to do
with
i think i've heard those called switches
and they're always in sound sections for
some reason i think i might be wrong but
they may even be on pac-man
i may be wrong about that
mc1408 i have no clue
and then two little i bet those are tda
2002 amplifiers
what i'll do is i'll pull a couple of
those caps off and we'll get down there
where we can see them so if you're not
if you don't work on stuff like this
very often
a lot of times if you start getting bad
sound or a hum or something it's because
these capacitors that they use to filter
some of the stuff
um have dried out and so you're getting
junk on the sound
so the speakers plug in or come out
right there and if you look on the back
they are joined together so they're
jumper there's two lines out
jumpered the two other lines out and
then you see these two lines
one of them runs from this
capacitor
and one of them runs from this capacitor
okay
and uh
they run the capacitor is tied directly
to the amp
so very cool all right
so i'm going to replace what have we got
here i'm not going to worry about these
i'm gonna replace one two three four
five six seven seven electrolytic
capacitors
it could be these but i think it's more
with the amplification and since the
volume control plug is in here these
might come into play let's see i would
love to find one that's just tied to
ground maybe that had would do something
have something to do with it but i can't
really yep
bigger in hell
this
one it's tied
[Music]
tie to ground
this one is tied to ground
and
this one is tied to ground
so i don't know if i was just gonna if i
had to guess i'd say it's one of those
three but i don't know we're gonna do
all of them
so let's see what kind of amp that is
so it is in fact a tda 2002
um
so i'm just going to leave it i don't
think there's anything wrong with it it
could be the reason there's a hum you
can replace these with a tda 2003
but you can't replace them with a tda
2020 or a tda2030 now isn't that
confusing
so it can be a 2002 or a 2003
i think the 2003's are a lot easier to
get now and they're a little bit better
apart and they are like
30 cents or something like that they're
real cheap
so
cool little board all right let me
replace the capacitors
okay so i swapped them all very very
simple these three appear to be on the
power rails
so that you know whatever voltages this
uses if
one of those was tripping
they are 100 micro farad 35 volt
right
so we'll try that in a minute but i
wanted to show you something
check this out you might enjoy this
this is
the first williams sound board
for their pinball machines and their
video games
so this is the board that was in
defender
some of the defenders and this is the
board that was in uh things like uh
flash and tri-zone and i don't know
about triathlon flash
um
[Music]
and a lot of those early
williams pinball machines
so you've got a
well i probably can't tell what the cpus
are
i don't remember off the top of my head
they use motorola part numbers sometimes
so it's hard to oh that's a 6802
okay so it's a 6802
and then you have the famous 6821 again
and that is the rom
am i right about that
no
yes yes i am right about that i don't
know what they used for ram how does
that work
hmm
i don't know maybe i'm wrong but anyway
there's your rom
so this is the first one that they used
and their pinballs and their arcade
games
someone has mounted that there i don't
remember them all having that but maybe
maybe
okay
then there was an upgrade
this was their second one that they used
so this is in stuff like
cinestar
and joust
arcade games
and then it's also in things like
a black knight
stuff like that
okay
so if it was a game like joust it would
just use this board
but if it was a game like
sinistar and he had to say
i hunger
they needed speech
so they had a little speech attachment
board
which is this
and so there was a little connector that
went here
and this was the speech board i don't
know what this one's from
you could probably tell by those numbers
it says 5t 5001 if i googled that it
would probably tell me
but this is the speech board
okay so again for the arcade games and
the pinball machines but then you know
they stopped making arcade games for a
while
williams at least
and eventually williams
uh and bally merged
okay and we're no longer competition
so then you know what came out
eventually
are you ready for it
this is the mortal kombat sound board
but before the mortal kombat sound board
you know what came out
space mission pinball machine
so this would have been after
these you know
so late 80s
but before
mortal kombat
nba jam i think has the same sound board
but they share similarities so
volume control
power
signal from the main board
ribbon cable
ribbon cable
one of these is power and one's volume
control same kind of setup really
i mean if you look it's literally the
same connectors look
six pin connector for the power
three pin connector
for the volume control
and then a four pin connector for some
kind of pass-through i guess from the
main board
and the ribbon
okay they use the same types of
electrolytic axial capacitors
those famous ones with the blue
um
film on them
they use the same chokes
pretty cool huh and then you know what
they came out with
mortal kombat 2 a little more complex
they added more rom sockets so that they
could uh
they could do more
so same thing
blue caps chokes connectors a little bit
different but it also has a ribbon cable
connector
and by this time they were using these
um
i don't know what they call these
the big square chips
i know it's called plc's or something
like that
but it's kind of cool just seeing uh
williams evolution of sound boards
there's one of the first ones
beat all the hell
and then there's uh
as of mortal kombat 2.
okay so we'll go pop this back in the
machine and see if we got rid of our hum
or if it's something on the power supply
all right we're back installed the
volume one goes on the bottom and the
pass-through one goes on the top
let's see if that fixed our home
sounds awful quiet but we've been
tricked like this before
we're going to have to give it a few
seconds
now the hum you're hearing
you're gonna have a little bit of it i'm
talking about the the loud loop that we
had earlier
this is just pinball home here you want
that
i don't know i think i might have done
it
you know what i think the best way for
us to tell is is if we set up the camera
on a tripod
and we play it a little bit
because i gotta test it
i gotta test it and see if there's
anything else messed up on it
so let's play it a little bit and see if
the sound is acceptable
okay folks i cleaned up the glass took
it off and uh
noticed a couple issues
so we're gonna have to order some parts
for it but uh
i figured i'd show you what it was and
then we'll do another video where we do
the
repairs that i've found that i figured
out
so first of all there were a couple
light bulbs burn out so i
went to change those and then i noticed
that the three pinballs weren't in it
there were only two pinballs in it
there was one stuck
[Music]
looking away
[Music]
let's hear it for yamaha's 2151 chip
it's a damn good chip if you ask me
um
i think the sound's fixed
up here at the top there's a popper that
there's parts missing from and stuff so
the ball was stuck up in the hole so
you know the customer told us that uh
everything was working fine now is he
trying to deceive us or something no of
course not
it's just he probably doesn't realize
that there's stuff on it that doesn't
work so remember i mentioned that at the
beginning it's usually like that almost
every time somebody brings us a game
there's more wrong with it than they
realize even
that particular one with the ball up
there the game won't even start though
so it's been i bet it's been giving them
trouble for a while so i don't know what
happened to the piece but the whole top
of the popper is missing so what i did
was i put a paper towel down in the hole
so the ball can't get stuck in it
and then i played it a little bit and i
noticed some other stuff
so we'll play it a little bit and you
tell me what you notice is wrong
and uh uh then we'll do another video
where we where we fix it because i have
to order the parts for that popper at
least right so let's see
so i got three balls in it now
[Music]
nice nice pop bumpers
okay you see that
up at the top left there are three drop
targets right here that aren't up
[Music]
see the drop target here
so that's up there where the rag is
i don't think the kickers are working
either
[Music]
that kicker's not working
[Music]
say the kickers are not doing their
thing
last cheat
all the switches seem to be fine
that's not working
[Music]
[Music]
so
so what's going on
it knows that the ball's up there but it
can't kick it out of that other popper
right
the popper is never kicking
another thing
i'm not sure all the flashers are
working
so we got some issues
so
unfortunately it's working yeah but
you're not gonna be able to play it like
this i mean the ball keeps getting stuck
and that's with uh
look we've got another lineup that's
with uh the one thing blocked off so
neither one of the kickers are working
right i mean the poppers are working
right the rebound kicker's not working
right the slingshots don't seem to be
working right and the three drop targets
are working right but besides that
everything's working perfect
all right so we'll do another video
where we fix all of it make sure to give
us a thumbs up
for working on the sound that was cool
wasn't it we're about halfway there
folks it's all good it's all gravy baby
don't worry about it make sure to give
us a thumbs up for for uh filming it for
you we didn't have to do that
we're bringing you along so you can
ridicule us and mock us like people have
been doing lately i won't name names but
but uh we appreciate you watching let us
know what you think so far and uh we'll
film another video whenever we get the
parts in it'll just be a couple days in
south carolina we order from marco
specialties a lot of the time because
they're down in columbia so they can get
us stuff here in like two days usually
says no big deal
and make sure to check out my brother
donnie if you don't know about that
my brother donny here on youtube he's
literally my brother has his own channel
if you like watching us work on these
old arcade games and pinball machines
you may like watching us work on listen
to those relays
that don't sound right
might have to look into that too
uh so uh if you uh
my brother donnie and i have bought a
couple buildings in a small town near
here uh that we're working on we have
some uh uh um some older buildings that
we bought that were that were
dilapidated basically we're fixing them
up trying to help revitalize the town so
make sure to check that out
and we'd like to thank everybody that's
been that relay's driving me crazy
sounds like it's the flipper
the relay aren't coming on
what else would be on a relay
sometimes the general illumination is
but it's all on
we'd like to thank everybody that's been
using our links to amazon if you don't
know about that down below there is a
link to amazon
if you buy anything
from uh
there's another kick out over here i
never checked if you buy anything from
amazon after going to our link through
our link it gives us a tip so a lot of
people have been doing that we
appreciate that somebody bought a gopro
on there earlier that's pretty cool
but people buy a little stuff on there
all the time so we appreciate it
um
let's figure out what relay it is what
do you think
let's go see which relay it is
it's d23 relay one on the power board
it's tripping
now there's a relay over here
that is the gi relay i saw it go off and
it's working good and then this is the
flipper enable relay
it's working good you saw us playing the
game
but that one is tripping so uh
i don't know what that's at we'll look
it up in the schematics that will give
us plenty to work on next time so i hope
you enjoyed it give us a thumbs up we'll
see you on the next video click
click
click
click