We are working on a Nugent pinball machine, and the sound board is dead. Let's work through it...
One of the ways you can support our channel, is by checking out the items we promote on Amazon. If you purchase any of these items, or even follow the link, it pays us a commission. Even if you purchase other products after following the link it pays us a commission.
At the moment, we'd like to show you this beautiful Weller soldering iron that we use every day in our videos. The Weller adjustable temperature irons work better than cheaper ones because they attempt to keep the tip at a certain temperature, and are a higher wattage. This helps you get nice solder joints and makes it easy to do repairs.
These links below are to this product in various areas of the world, thanks for watching!
Check Out Our Patreon Account, for Unreleased Repair FAILS, Concise Repair Tips Not Possible In This Long Form Video, And 1 on 1 Repair Assistance with YOUR Project!
Music by: https://www.bensound.com Artist: Benjamin Tissot License code: GWVNUHFXSBI43ZUC ---------------------------------------------------------------------------
Our store is located at 139 Caldwell St., Rock Hill, SC 29730.
Ladies and gentlemen, this is Joe's Classic Video Games
back with another cool pinball repair video
for you this evening.
We are working on a Stern Nugent,
named after the great guitar slinger, Ted Nugent.
This thing came out in the late 70s, was really cool.
And we did one video on it already
where we worked on the displays primarily
and then worked on a coil
that was fried underneath the play field.
The thing is playing now,
but it's got a problem where the soundboard doesn't work.
So we've got to fix the sound.
Now, when the customer brought it to us,
he left us a list of stuff that was wrong with it.
And he mentioned that the sound doesn't work.
I have unplugged the soundboard earlier
because we were trying to figure out
what was going on with the displays.
And I just wanted to make sure the soundboard
didn't have anything to do with it.
But let me show you something about this.
On this board, this is the soundboard.
The game's on right now, but this is unplugged.
All the power's unplugged.
On the board, there is this huge connector on the top.
It's actually two connectors, right?
And it looks like someone may have repinned it
because see how shiny the connectors are, which is good.
But there's a problem with these.
Basically, if you think about it,
there's a couple different ways you can plug it in.
And then to make matters worse,
there's extra pins on the connector.
They didn't key the thing.
It's keyed there, but it's not keyed on these connectors.
So notice that one pin is missing.
If you look at these connectors, though,
there's no pin missing.
So it could be that the reason the sound's not working
is that that connector just isn't plugged in.
This is the MPU that controls everything
and it tells the soundboard what to do.
Well, if those address lines
and things aren't connected right,
it can't tell the soundboard what to do.
So how are we gonna figure that out?
Well, we're gonna read the freaking manual,
just like always.
So let me look at the manual
and see if we can figure out what the deal is.
This is Stern's SB-100 soundboard.
It was their first soundboard.
It has really just basic tunes that it plays.
Like, it can't play a wave file or anything.
It's just boom, boom, boom, boom, that kind of crap.
Which is kind of a shame on a Ted Nugent machine
because you can't get any distortion.
You can't get,
gong, gong, gong, gong, gong, gong, gong, gong, gong, gong,
gong, gong, gong, gong, gong, gong, gong, gong, gong, gong.
Won't be any of that.
That's the best it's gonna get, folks.
Okay, so let's look at the schematic,
see if we can figure it out.
Okay, so this particular game still has all of its schematics with it.
It's actually in pretty nice shape, the whole thing. I mean the cabinet's in good shape,
the play field's in good shape, back glass is in great, great shape. This is kind of neat.
So it's a shipping envelope packing list. So there's a plastic bag, a 20 amp fuse,
a quarter amp fuse, a 1 amp slow blow fuse, a 3 amp slow blow fuse, 4 amp fuse, 5 amp fuse,
10 amp fuse, 3 quarter amp fuse, and a number 44 bulb. So this is all stuff that's extra
that they send with it. That's nice of them to give us one extra bulb. I love it.
There was a coin denomination card, two instruction cards, three high score and
match replay cards, one, two, three, four, five, six, seven, eight, nine score and replay cards,
a Nugent schematic and wiring diagram, we've got that, an MPU board schematic, that's what we've
got here, it's a very large one, the display board schematic, we've got that, power transformer
schematic, we've got that, the electronic sound schematic, we've got, the cabinet and front door
wiring diagram, we've got, the Nugent catalog, we've got, the general book, we've got, and the
packing list, which is this. So the Nugent catalog is the manual for it, and then this is the general
book. Stearns games, general book. So this came with several of the different games because it has
general information in it. Tells you about how to rewire the transformer if you need to,
how to get into the front door game adjustments, dip switch settings,
routine maintenance on location, contact switch adjustments, and a block diagram,
because it would be the same in all of them, because they all use the same boards,
until they started with soundboard, and that was new. All right, so if you look here,
this is the J5 connector at the top of the game, and if we count 1, 2, 3, 4, 5, 6, 7, 8, 9, 10,
11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, and then we get to the key
where there's a pin missing, and then 30, 31, 32, there are three past that, so there's 32 pins
counting the key on the MPU. And then if we look at the soundboard schematics, and by the way,
the first thing I notice is there are all these little preamps, the 324s, those are known for
going bad. Those will often go bad. You can see how simple the schematic was for this because
they're basically just using preamps and resistors and transistors and caps to make little
digital sound waves, and then shaping them a little bit with some potentiometers and stuff.
So, in other words, it's not playing any recordings or anything like that. It's literally,
this one can go, boop, boop, boop, and this one can go, boop, boop, and this one can go,
and they just, the way the game plays a melody is the MPU through this connector turns this on,
then this on, then this on, and then cuts them all off, and then it plays it kind of like a piano.
So here is the J1 connector on the soundboard, and it's got one, two, three, four, five, six,
seven, eight, doesn't care about nine, ten, doesn't care about 11, 12, 13, it's got, there's
13, doesn't care about 14, there's 15, 16, 17, doesn't care about 18, 19, 20, 21, 22, 23, 24,
all of those could, oh, there's 23, most of those could have been empty, doesn't care about,
there's 25, 26, 27, it skips 28 and 29, and it has 30, and it has no 31 or 32. Now we just said
that the key is 29, so it doesn't expect anything on pin 29. Okay, this is a different connector.
So those little cables, they've got all of the wires in them, but it doesn't need a bunch of
them. And notice that it stops at number 30, so that explains our situation. So number 30, it says
five volt supply, right? And then there's a test point here. This is not a five volt supply that
the board is creating, it's getting it from the MPU board. And we look over here, sure enough,
on pin 30, there's a five volt. So there's two extra pins, 31 and 32, but they don't actually
need it. So when you hook this up, you need to connect pins 1 through 30 and then leave the last
two unhooked. And if we look, pin 1 is D7, pin 2 is D6. And over here, pin 1 is D7, pin 2 is D6.
So the way you hook them up is you have to be very careful that pin 1 on the MPU goes to pin 1 on the
end. Now, how in the hell did they expect people to just know that? Clearly you can figure it out
if you look at the schematics, because I don't have that memorized, but I do remember that there's
always a couple of pins hanging off the end of it. And they stayed like that the whole time,
whenever it got up to, or as far as I know, I shouldn't just blanketly say that, but I think so.
They use that same, I think it's the same board, the same soundboard on flight 2000.
And then they had a, I may be wrong about that actually. They also had the speech board,
of course, on flight 2000. But I don't think it ever used all of the pins.
So let's go back and look at ours and see if we can figure out where pin 1 is on the soundboard.
So here's the soundboard. I do not like the look of these tantalum capacitors,
those blue capacitors, they're short.
This board has had capacitors replaced on it, but I don't know if they messed with those.
If you look down at that end, it says 1, and at this end it says 30, it may say 32 actually.
What does that say? Yeah, it looks like it says 32, doesn't it? But you see how that one has an
arrow on it? That would be the key again. So we'll count all that and figure it out. But
basically we need to make sure that that side of this one is pin 1 here. So we got to track
it down and then make sure we plug it into this correctly. Also, when you're plugging this in,
you need to do it with the game off, obviously. So I'm going to turn it off.
Okay, so there are actually 32 wires. Somebody has numbered them too, that was smart.
Because there's 16 on each. If you look, you can actually count them because
they do yellow, red, yellow, red. So it's 2, 4, 6, 8, 10, 12, 14, 16. There are 16 wires on each
connector 32. So this one says 32 because I guess it's a replacement since it's not the original
board. And so they populated the two extra pins, but you don't use them. Let's look at an original
board to see if I'm crazy or if there's always been an extra two pins. Okay, so just to confuse
things, this one has 33 pins. So that other one appears to have 34 pins. Oh yeah, there's something
weird going on here. Let me see if I can find a stern one. Here's a stern one and it has 32 pins.
That is three after the thing. So apparently different ones had different numbers of pins.
You can see this one has 32. It's a bally, but this one has 33, just so you're confused.
So whether it's 30, 32, 33, whatever, if you've got extra pins, you need to see them on the
left side of this connector whenever you plug that all in. So we're plugged back in. The customer may
have had it plugged in correctly the first time though. I don't know because I guess I could watch
the previous video, but I unplugged it whenever we were working on the display. So let's see if
that gets us any sound. Nothing. Okay. Do we even know that this speaker is working? Let me try
turning up the volume. I don't hear any kind of buzzing or anything. Usually these have a little
bit of a, hmm, going on. No scratchiness in the volume control. Kind of seems like the sound
amp is just dead. Let me see if, make sure the wires aren't cut. Let me lift up the play field
and we'll look at it. Check out this old speaker. The two wires are connected and the two wires are
connected to the potentiometer. So we should be getting something, some kind of scratchiness or
something. Okay. So the next thing I would try is to massage the soundboard. So there's no high
voltage on the soundboard. Nothing goes above five volts, maybe 12 volts, but, so you can touch
it safely. On these early boards, if you touch some of the preamps, you'll get like a buzzing
sound. You'll hear boom, boom, boom in the speakers. So let's see if we can get any noise just from
touching the chips. Nothing. Sure sounds like a dead speaker to me or the power supply, the power
on the board is just completely gone where it's doing nothing. Okay. So let's see if we can check
to the speaker from the soundboard and I'm checking the resistance across the speaker
coil. We've got 6.2 ohms resistance. So that's probably about an eight ohm speaker. Now I know
it's impedance. You can't do it. Yeah, you can. Yeah, you can. You can check it that way.
So the speaker seems fine. Doesn't necessarily mean that it is, but there's no short,
there's no break in the wire and we're getting, you know, an ohm reading that we would, that we
would think would be normal. If you got something that was like 0.4 ohms, it's shorted. It's
probably not going to work. Or if you got 4,000 ohms, it's open. It's probably not going to work.
So yeah, we're getting nothing out of that soundboard. Let's pull that out of the machine
and look at it on the desk and see what we can figure out. Well, I figured out what the problem
is, or at least what a problem is. We figured it out earlier. We figured it out at first glance.
Do you know what the problem is? So I remember I said, I don't like those tantalum caps. I don't
like those. I checked before I pulled it out. I went ahead and checked the voltage and there's
no five volt on test point one. So test point four is the ground and test point one is the five volts.
So test point four is the ground and then test point one is the five volt supply for ICU1 through
U5. So here's U1, here's U2. Okay, so you can see that it's several of the address lines are used
for that. The read write line is, runs through these. Another address line, another address line.
The VMA line, which I think, what's that doing? It's telling us that the voltage is
steady or whatever. I don't know. And then here is the clock signal. So we've got no clock.
We've got no read write line and we've got no address, you know, any of the address lines. Yeah,
look, they all run through those. So the data lines are still there, but the address lines all
run through those chips. So without that five volts, none of these chips are going to work.
Then it gets over here to these. This is three, four, and five. So, you know, your clock line is
coming in here and going to the clock signal, but it ain't going to do nothing folks. I wonder if
these are also, oh yeah, here we go. Look, look how they've drawn this. This is strange. I don't
usually see them like this. Look, that's a 7475. And look, they have drawn this one backwards
so that they can conveniently put pin four and 13 here and here, and then pin four and 13 are here,
coming from the two sides of this chip. So anyway, the clock signal is not going to be
on any of these chips. And so none of these data lines are going to go anywhere.
And none of these address lines are going to go anywhere. So in other words, the computer,
the MPU cannot talk to this board because it doesn't have the voltage to drive the chips
that are decoding the signals from the board. All right. C38 and R88 are right there next to it.
So basically when I'm in this area, I'm getting sound, but it's not the actual sound. I'm just
getting static, right? So I'm touching like, there's C38. So I'm touching in this area.
But if you look at that other one right next to it, it's R85. Okay. Which is this one.
So I think by what I'm, the reason I'm getting sound is because the capacitance of my finger
is connecting that to that, and it's bypassing that chip and I'm getting a little bit of static.
So it seems to me like it very well could be U18 because I think we would get, if it was anything
else on this board, you would get some sounds, right? You would have to have all kinds of failed
chips, which maybe we do. Maybe we do. If U1 and U2 were failed, you would, if either one of those
would fail, it might kill everything on the board too. But I've had all kinds of problems with these
324s go bad. I've fixed tons of Space Invaders. I think Space Invaders might use the 3900.
I've fixed Asteroids boards with that. If these preamps go bad, you lose all sound or you get,
you'll hear like a clicking sound where you can just barely hear it. So my educated guesstimate
is I'm going to just swap that chip. There's several other ones on here too, like U16,
U15, U17. But we're going to do that one because it's the one that would affect
everything on the board. Let's see if that brings any of them back. Okay. So it was the
only one that was shorted. I replaced the other ones anyways though. Let's see if that gets us
our sound back. Maybe we'll get like... I hear amplification. Oh, she's noisy. So the volume
control works backwards it seems. Let's, here we go. Might be loud. Watch it is. Maybe it doesn't
play a startup tune. I can't remember. Nothing. Let's go louder. Nothing. Usually you hear some
clicking or something. We're dead, Fred. But we are getting amplification now. So now if I do the
thing where I touch it, you don't think I'm going to electro kill myself, do you? So that's what we
were looking for earlier. All right, let's look at the schematics. So the way these sound circuits
worked on this early stuff, and the early arcade games did stuff like this too, is the computer
would select something and then you would get an output from these chips turning on a different
sound basically. And then they would all come together right here, pass through this capacitor,
through this preamp, and then into the final amp and go to the speaker. Okay, so there is a bottleneck
right here. Now I don't know where I was just touching. I'll have to go back and check.
Let me see if I can track it down. So see this resistor here? So see this line?
That is the output of this U11, whatever that is. And you can see that U16 gets some signals.
One from up here and one from over here and blah blah blah. And it is ultimately triggered by
U15 here that's coming through here and comes out of here and was basically data line one,
right? And then if you go to the one above that, it is the output of U10 which was triggered
basically by U2 which was the output of here. So you have all of these different sounds that
can be triggered. Up here they're a little more creative. But they all tie together through a
resistor and they use different strength resistors depending on what I guess the sound is. They all
tie together right there and they go through that one cap and then into U18. So theoretically,
if this cap was bad, that would kill every sound on the board. And if U18 was bad,
you would get no sound either because the sound all would stop right there.
You would still get amplification. We're turning up the volume pot here which is messing with this,
right? So it could be that no sounds are passing through here. Let me go look and see where I was
just touching on the board because if I was touching these and we were hearing it amplified,
then this is probably fine. But since we have no sound, you know, we're looking for something
that's common to everything. It could be this final amp, the LM380. But if it was that, you
you wouldn't get any buzzing or anything. So it could be that all of this is working
and it gets right here and it can't get through. So that's our working assumption. Okay, so it
seems like if I touched over here, I didn't get any sound. But if I touched around here,
I got sound. And if I was touching this capacitor, I got sound which is C38.
I don't know where C38 is. Let's see if we can find it anywhere. There's 36.
Basically, when I'm touching these resistors, I'm not getting anything. But when I touch,
I think I'm jumping over some of it with the capacitance of my finger and that's what's
making the sound. There's C39, 36, 40, 35, 42, 47, 48, 40. All right folks, that didn't fix it.
Now we know that that's taken care of. By the way, you're about to hear the
knocker go off here in a minute. So don't get scared to death like Matt did.
You got scared. You're wet, Matt. I didn't even know the machine was on.
All right, so that had nothing to do with it. But at least now we know the output will be nice
and clean. Okay, so I got out the Logic Probe and we started checking signals. The reason that you're
hearing the knocker over and over again is because I've got it in solenoid test, which I don't even
know if it needs to be in solenoid test, but my theory is they're using those data lines to do
this because that's how Bally did it, but I don't know for sure. So I took the fuse out from
underneath the play field. So the only two coils that are working are the knocker and the flipper
relay. Okay, so I think it might be cycling through the sounds, but we'll see. You know,
whenever it did the one, two, three, four, five, six thing. So I've checked this clock signal and
it's there and it's there and it's there. Okay. I've checked U1 and it has information here.
So, okay. And then I checked U2 and believe it or not, it has a signal there, 12. Okay.
But then this side of U2, not the band, the chip has no output on six or eight. So the clock signal
is not getting to these chips. If I check pins three, four, five, I have a signal, but I have
no signal at six. If I check pins nine, 10, 11, I have a signal, but I have no signal at eight.
So I'll try to show you that. So that's nine, 10, 11, and eight is always low. So
I think that might be our problem. I don't know for sure, because you know,
it really depends on the logic level. So I think all three of those have to be high,
for that to go high or whatever, or all three of those had to be low for that to go low or whatever.
But if all we're seeing with this logic probe is action, we don't really know completely what's
going on without using a signal component and looking up the logic table of what that's supposed
to do. But I'm getting no output there and it's a clock signal. So surely it should have the clock
one at all times. I guess I could start the game and see if that changes our situation.
So let's start the game and see if that gets us an output on pin eight, because it should be
sitting there waiting on something to trigger a sound, you know. Some credits,
or we might have started it. Okay. So you heard the flipper thing. That's basically telling us
ball one. Yeah. So we're scoring. Okay. So the game is up and running. Now let's see what the
output of pin eight is. Yeah, it's dead. So my theory would be that U2 is bad,
because we've got signals coming in, but we've got no signal going out.
You know, we've got the clock coming through and that's one of the inputs.
And then the other inputs are address lines. We've got one address line going to both though.
So I wonder if they're using that to turn it on or something. I don't know. It should be on though,
because surely these should be getting their clock signal. It wouldn't be very appropriate to
have these chips turned off until a sound is triggered by one of these data lines. You could
hook an oscilloscope to it or the logic probe to that pin and then trigger sounds with your hand
and just see if it ever pops in. But I think our next gunshot guess is chip U2, a 7411. So we'll
and that didn't change anything. So eight and six have no output, but we've got good pulsing on all
of this. Again, we don't know for sure that those are perfectly correct, but it's doing good. And
then these are just low. I'm going to pull the board out and look at this because there's different
revisions of this board. For instance, this board doesn't have U5, even though it's shown in there,
which it shows U2's output is just for U5. But U5 isn't even populated on this. And also all of
this isn't populated on this. This portion was used if the boards recreated the chimes.
So when they first moved over to this solid state sound, all the games had a little switch
where you can make it have the chimes instead of the bloop, bloop, bloop, bloop, bloops.
So they had a thing that kind of emulated the chime sound. It kind of sounded just like the
chimes or very close because they thought that players would balk if they didn't have the sound
that they were used to. They were very concerned about that. On the Williams games, like Hot Hand,
for instance, they even put a score reel in the bottom of the game inside the cabinet to just go
click, click, click, click, click, click, click, click, and move around while you were playing
because they just wanted it to have that same sound that the EM games had. And they were
afraid they were going to screw up and people wouldn't like these new electronic games.
So all that to say, there's about three different versions of that board. This is the
first revision of C. It looks like C1. So I don't know. So these schematics might not be quite right.
This doesn't say a revision on it. So I'm going to pull the board out and just see what we're
looking at here because this is still low and this is low, but we've got good pulsing here.
So I don't know. It could be if this cap is shorted, we would have that same problem,
but what's going on is we have information here and here, but we've got nothing coming out of
this. Okay. So I pulled the board out and looked at it and it is, the schematics are correct.
With the exception of, we don't have this chip. So that helps us though, because pin six doesn't
go to anything. Like it goes all through the board, but there's some jumpers that need to
be in place for it to get over to here. This chip doesn't exist. So six isn't hooked to anything
and it's low. Eight is hooked to some stuff and it's low. So my whole point is, if the problem
was one of these chips shorting the line to low, one, you could check it on the board. Like I'm
checking and nothing shorted. None of this is shorted to ground and this capacitor is not
shorted. So like if this one was shorted to ground, but this one was doing its thing toggling,
even though it wasn't hooked to anything, that would tell you, well, this chip's fine. It's just,
it's not going, one of these is shorted, right? But I'm not having that problem.
This is messed up and this is messed up and they have pretty much the same inputs
with the exception of address line six and address line five. All of these are pulsing,
pulsing, pulsing, pulsing, pulsing. To figure out though, if it's working properly, you kind of
need to hook it up to a scope and see if they're all high at the right time or they're all low at
the right time. And it's a ton of work. So we have replaced U2, which is the 7411. I'm getting good
signals here on all of this to the best of my knowledge, right? But it could be that this isn't
performing the way it should be. So for instance, maybe this A12 on this input, instead of going
from zero to five, whenever it pulses, maybe it's going from zero to three and it looks like it's
pulsing, but it's just not quite right. So it could be U1 is giving us a problem. So my next guess,
and it really is a guess, is U1 because the signals, the address lines that are being used
are coming from another board and it's a new board. So NPU is new. The only thing on this
board that is involved with 6's output that isn't connected to anything else, it's just the output
of that chip. The only thing else involved on the board is this one chip. So we're going to try it
next. To be honest though, a 7402 is generally pretty robust. You don't see those go bad that
often, but anything's possible. It's a 50 year, how many years? 50 year old chip. Well, that didn't
change a thing. I wonder though, if we're chasing our tail, because look at this, none of the dip
switches are set. So I'm looking in the manual. Electronic sound. The game will produce computer
type sounds. Computer type sounds. Turn switch 23 on. And it ain't on. It could just be that
the dip switch is turned off. And it also says melody option. If switch eight is on, you get
more music. Wouldn't that be some crap? I mean, we definitely had that cap shorted though, so
we may have just been chasing our tail after that. I hope that fixes it,
but if it doesn't, we'll keep looking. Might be loud by the way, if it does work.
Un-freaking-believable. So I broke one of my rules and it made me waste some time.
So I'll go over it. I am not, um, this is not to anybody in particular. It's not,
certainly not for the customer. It's just to other repair people. If you get something in
that someone else has worked on. So on this particular one, someone had replaced the MPU.
That's probably the problem, usually. Now, like I said, this one, you saw how the cap was shorted.
The first few chips weren't going to work with that cap shorted. So it did have a problem on
the soundboard, but I should have looked more carefully at that MPU. I did kind of, because
remember I was thinking, oh, it probably, the connection's not right or something,
on that top connector, et cetera, et cetera. But I never thought to check the dip switches.
And this is kind of a weird one. You saw what happens. If the dip switch is one way,
there's no sound. If the dip switch is the other way, there's sound. That's kind of weird,
but that's just how they did it. So why would it be like that? It's because they, they used,
really generic code in these early solid state pinball machines and all of the companies did.
On the Williams games, they use what they called flipper ROMs. And there's like the green flipper
ROMs, the blue flipper ROMs, the red flipper ROMs. This is a real common thing back in the day.
Also, since Williams pinball, also the Williams arcade games, Robotron, Joust, Defender, Stargate,
Bubbles, and there's only a couple more, Blaster. Is there one called Turkey Shoot? I've never had
it, but something like that. There's just a handful of Williams games. The Williams games
used what they call decoder PROMs that had to do with the RAM and stuff, but it was like the same
ones in each game. The code in that, they just reused over and over again. So the same thing in
these machines. So they probably, I was talking about how this had the, this area that did the
chime thing. So it's probably leftover from that, where they had some way of making it, either the
chimes work or the, the electronic sounds work. And by the time they got the Nugent, they didn't
even do the, the chimes and, but they use the old ROM that you can swap it back and forth or
whatever. And it's not necessarily the ROM, it's the, that portion of the code. I'm not a software
guy, but you know, if there's a, if there's a ROM, you've got all these zeros and ones filling up the
whole thing to make the game work. Well, most of the stuff, like if you hit a switch, it scores 10
points. If you hit another switch, it scores a hundred points. If you hit another switch, it hits,
it scores a thousand points. That's the same in every game. They just move the stuff around on
the play field. So the code that makes that work might take up like this much of the ROM space.
And it's all the same. You know, there's, there's code in there that says when 10 points is scored,
check to see if it's on, which player it's on and increment that players score 10 points. You know,
all of that code is the same on every single game. So they don't rewrite every little bit of that.
Every time they make a new game, they take the majority of it and leave it the same and just
try to rewrite a little bit of it. If I remember correctly, didn't Nugent have the exact same code
as another game anyways? Let me look on the internet pinball data. I don't remember if we
read this just the other day when we were working on it or not. But service bulletin number 7a
indicates this game uses the same ROMs as Stern's 1978 Lectro Anamo. Lectro Anamo. Because Lectro
Anamo used a bank of five drop targets, the left bank of three drop targets on Nugent has double
switches on its outside targets. Service bulletin 12 clarifies the correct wiring for this left
side three bank. The manual mistakenly refers to this three bank as five bank drop target
on page nine for game adjustment 13. So yeah, they were reusing code just to save money and
I don't blame them at all. That's the smart way to do it. You know, when the games were
this simple, they all had drop targets and saucers and kickers and points and pop bumpers.
It's all kind of the same. It all worked the same. They just made the theme more interesting
and they made the layout of the play field more interesting. So this is the Lectro Anamo manual.
It says the game will produce two different types of sounds, either electronic chimes or
computer type sounds. Now you saw in ours, it won't produce electronic chimes. That's because
that part of the soundboard is missing. All of those chips are unpopulated on the board.
So it's worded kind of funny in the Nugent manual, but I guess they were like,
look, if they're into heavy metal or not heavy metal, but hard rock music,
they don't want electronic chimes in the game. They're cool with the computer type sounds.
So they just deleted that out and they also deleted all the extra chips off of the board
because by then they were sure that people didn't want the electronic chimes. They were
quite fine with computer type sounds. All right. It's going to be loud. I don't think it hit the
switch. Did it? Oh, we're dead. I must've tilted it when I shut the door or I never, I don't know.
I never started the game. That's four notes, people. That's all it's got, I think.
We're tilted a little bit for sure. This gentleman has all of his legs down real flat.
Do it like that. You need to get them a little tilt on it.
That seems like it all plays pretty good to me.
I like this game. I think it's a fun game.
All right. So obviously none of the playfield lights are working except
for the hundred up at the top was blinking.
We're going to have serious, um, lamp driver board problems, I think.
All right, folks, that's enough for tonight. We got the soundboard working, but we're going to
have to wait on those lamps for another day. I hope you enjoyed it. Leave your comments down
below. What do you think about the soundboard that they gave uncle Ted here? It was all they
were capable of at the time, folks. It was the best they could do. So I hope you enjoyed it.
We will see you next time when we'll work on this one or maybe another one. I hope you
are liking all these pinball machines that we've been doing lately. We got a whole bunch more and
we keep getting more in. So we're, we're, we got, we're backed up. We're staying late trying to fix
stuff. So we'll see you on the next one.