Finishing up Repairs On This Hallicrafters S20-R Radio From 1939, What A Nice Set!

Amateur Repair Time
257 followers
722 Video Views·Dec 21, 2025
Check out our Patreon page, for all of our channels. Contains outakes, concise arcade repair tips, bloopers, repair FAILS, Audio youtube wouldn't allow us to upload, and much more!
https://patreon.com/JoesClassicVideoGames
------------------------------------------------------------------------------------
Ladies and gentlemen, welcome back to
Amateur Repair Time. We have been
working on this Halo Crafters
SL20R.
Is it SL or S20R?
S20R
uh radio receiver from 1939
for a gentleman who comes in my store
who wanted me to work on it for him. and
uh we messed around with a little bit,
figured out that the thing was working
fine with the original caps in it. Uh
but he's a younger guy that's just
getting interested in old radios and um
I know he's going to play it a lot. So,
we decided we better go ahead and do a
cap kit on it just to make sure that it
is nice and reliable for the guy. So,
we've been doing that. So, we've done
two videos on this. One where we kind of
went through it and figured out that
it's working and then a second one where
we began the cap kit and have done a lot
of that. So, all of these were
unplugged. All of these black uh
resistors, I mean, capacitors I have
changed. We've got a um the original
filter cap is here. Um and it had uh
four capacitors in it. We've replaced
one, two,
three,
but we haven't replaced the fourth one
yet. Yeah, three. One, two, three, but
we haven't replaced the fourth one yet.
Now, one way you can do that is put a
terminal strip here, right next to it,
and then mount all four of the caps on
it.
Um, but I was able to find a convenient
place to put three of them where I
didn't even have to do that. This last
one though is going to be a little
tougher because it uh has a resistor
tied to it right there. But we'll see
what we can figure out. We might be able
to do something cute. I'll bet y'all
just love that. I'll bet you love when
we do something cute on the doing a cap
kit. But we're going to keep going. And
I've done the caps from the top down. We
are down to about here.
So, we've got one, two, three, four,
five,
six,
seven.
I've got about seven left. I might find
a couple more as I go through, but I'm
going to go ahead and swap those out.
And then we need to test the tubes uh to
see if we've got any that are weak. And
then we need to align it. And then I can
bring it back to them. And I might even
get it done. right before Christmas. Um,
so we'll see. So, I'm going to go ahead
and swap those caps out. What I The way
I do it is I J hook it. So, I cut off
and basically one of the reasons I do
that is because Shango always does that
and he makes a really good point. His
point is if you remove the and I'm not
telling anybody what to do. You can do
it however you want. I'm just telling
you why I do it. If you uh unsolder the
cap from the tube socket, for instance,
you're putting a lot of heat on that
100-year-old tube socket um trying to
wrestle that wire out of there, getting
that just right.
Um and it, you know, you could very
easily weaken that connection there to
where that piece is no longer held in,
right? I've actually seen tube sockets
where the pin can come in and out. Um so
I don't really want to do that. So, it's
and it's much easier to just clip the
the um wire off of the old cap,
turn it into a little hook, and then
hook your new one over it, and then
solder that. So, basically, it's not
quite as pretty
um but it uh it keeps you from
overstressing those those um um the
tie off points basically, you know, all
of the the vintage electronics. So, I'm
operating under that uh that theory at
the moment. Maybe in the future I'll get
to where I can do it real clean without
burning stuff up. But, you know, I don't
know. I think he makes a good point. All
right. So, I'm going to go through and
start swapping some more of them. And uh
like I said, once we get that done, we
can start testing tubes and aligning it.
Look at Look how cool the alignment
procedure is going to be. I can't wait.
I can't wait.
All right, folks. I got them all swapped
out. I believe I've Now, some of this
looks like a spaghetti bowl, right?
The ones that are exposed like these
here for instance,
those are both those are all grounds.
So, if that was were to touch each
other, they're going to the same point.
Or if it were to touch the chassis, it's
going to the same point. So, they
already had it like that. the ones that
are stretched too far where they might
touch something like for instance this
one up here. I've got um the spaghetti
on it like the the actual the tubing so
that they can't short out. And there's a
couple that they run right beside each
other but that's because they're both
going to the same point and that's how
they had it. So blah blah blah. So the
fourth cap on that electrolytic I
finally swapped out and I I did I didn't
want to put a terminal strip but I had
to. So I ran it to a terminal strip.
This resistor was running to it. These
wires were running to it. And then I put
the cap here. And then this is connected
to ground.
So the way a lot of people do it is you
put a big terminal strip here and then
you put all four of the caps there.
That's a cleaner way of doing it. I just
did these other three because it was
convenient. I'm trying to get some of
the stuff away from that. I didn't want
to put a bunch of stuff on this ground
though because somebody may want to swap
that one of these days. Moving out. But
I think I did a pretty good job. That's
about the best I'm capable of. So, we at
the end of the of the previous video, we
turned it on after I had done the caps
down to here with the exception of that
one electrolytic, and it was still
working fine. Now, I've done these
um and um it's time to test it again
just to make sure it's still working
fine. Um, someone explained to me in the
comments on the last video, too. I was
trying to figure out which end's the
front end and which end's the back end.
And so, they were saying the front end
is the antenna. You know, it's grabbing
it out. Basically, this is a, as I would
understand it based on them explaining
or them pointing it out to me. Uh, this
is a receiver. So, the front end of that
is you're receiving it out of the air,
right? So the antenna part is the front
end and then this is the back end. They
usually don't say the back end though.
You only ever hear hear people talking
about the front end. [laughter]
So the front end would be the antenna
part I suppose. And I guess the first IF
or something or the is it the converter
and then the IF. Let's see. 6K8. What
are they calling that?
6K8. It's the detector mixer.
So, the the RF amp and then the detector
mixer and then you get into the IF.
Okay. So, we're going to turn it on. I'm
going to run my
my uh antenna back down the hall. If you
didn't see that, oh well.
On the first video, we figured out that
it needed um an antenna. So, I just
hooked some speaker wire to it. Um I'm
going to turn it on carefully. Make sure
nothing explodes. Now, the only thing
that I put in here that's polarized is
that one electrolytic, and I've got it
right. I know. Um, the other ones we we
already tested last time. And all these
other ones are non-polarized. So, um, if
they're in the IF or the front end, too,
um, I would imagine
you're probably going to get a situation
where it just kills all of the the RF
where you can't detect anything. if you
had a problem with one of the caps where
it's on the wrong lug or whatever, but I
went very careful. Did one at a time as
best I could. Um, here I had to do these
two at a time because they were on top
of each other. Um, but I think we're
going to be good. So, let me plug it up
and see if we can get back to where we
once was. Okay. So, it's still working
just fine.
>> Think it would have made a difference.
>> No, it it would [music] I mean,
>> a little bit of wine.
>> I think it would just made me feel
better. I don't know.
>> Right. I get that. [laughter]
Yeah, because to even though I'm trying
to stay grounded, like running this
checklist in my head, I'm I'm I'm
working hard to stay grounded because
everything is going on is not normal.
Everything. So,
>> this is an absolutely
great sounding radio.
>> I I felt like I could move a little
better. M you know and and
the other thing it was just it was no no
sound. Everything was quiet.
>> Okay. So I sprayed some contact cleaner
to clean the different u the the uh the
other channels which are uh so you got
broadcast and then you've got some
shortwave stuff. Um, so now that I know
none of this is going to blow up, you
have to you have to um align it with
these.
Um, but I'm going to go ahead and set it
down u flat like it's supposed to be.
That's another thing. You're supposed to
align it in the position that it's going
to be. Um, but I can't do that because
they're underneath it.
I've never figured out how you're
supposed to accomplish that
>> because the radio is supposed to be in
the position it's going to be in. But
you align it with the things on the
bottom of it under what it's sitting on.
I never understood that. So, I am not
going to do that. I'm going to do it
like this with it sitting up in the air,
I guess, cuz that's how you do it. But,
I'm going to set it down and I'm we're
going to see if there if we can hear
anything on shortwave.
>> Okay. So, I was reading in the um in
something
I was reading in a manual or something
about this radio, the helicoprafters,
and it was saying that what this band
spread tuning is for is that when it's
on zero,
uh you should basically this should be
aligned. And if you watched the previous
video, it wasn't. It was off. But now
that I've recapped it,
I'll be damn if you put that on zero.
This is 1110. we're listening to.
>> I want to take another look at those
thing.
>> It's pretty close
>> cuz it didn't looked it looked like it
was that it was going to stay there.
Okay. Now, as I walked back around,
>> right, [snorts]
>> I says, "It's odd. It was odd that the
circular one with the triangle was a
bigger one and above the other ones."
And so I I touched it, you know.
>> So that's 1110 there.
>> Feel it. But once I when I touch it,
>> that's 1100 there.
>> It's real close. I think it was like
five or 600 off before, wasn't it?
>> Um, and this kind of just fine-tunes it.
>> All right, so let's see if we hear
anything on the other channels again.
>> Oh my.
>> Probably not, but we'll see.
I'm just going to go through it quick,
too. I don't want this to take forever.
Heat. Heat.
Oh, you know what? We figured out last
time that this light is really screwing
it up.
Also, this light here just started
working again.
So, I'm fixing this up for a younger
gentleman, and I would love to find
anything on any of the other bands just
so he could know that he might find
something at his house.
Okay. I think that's just catching the
top of the AM dial, isn't it?
I think that's what's going on. All
right, now we're up to three.
I sprayed those with contact cleaner, so
they should be pretty good.
Come on, baby. Give us a numbers,
channel.
Come on. We want somebody on here
ranting about something.
Radio Slovakia in coming to you on the
world radio on the web at WN
from Bangkok to Bron Adelaide to
Anchorage and Vangor to Edinburgh.
Wherever you are in the world, you can
hear awardwinning feature programs,
comprehensive news coverage and much
much more on the world network. If
you're connected to the internet, you
can even use program whenever you like.
Simply wnational,
Florida, USA. Contact us at
[email protected].
[music]
>> This is the world radio network. Next,
Deutscheella from Bon Germany.
of messages that go directly, I believe,
to
the heart of what appears to be our
problem, but not limited to us.
And I I fear when I'm kind of in this
series that there are people that may
not understand
perhaps the most important part of this
has been picking apart
said in Galatians 5 regarding the fruit
of the spirit. See, I'm not sure
that matter.
[music] Africa every weekday here on DW.
Gold, boite, and other minerals.
Mining accounts for nearly 7% of Ghana's
economy and constitutes roughly 40%
I don't know enough about the
frequencies to So, um,
you know, what's used for what
so it could be that once you get to a
certain thing, you're not going to get
anything. But, um,
so I would say I picked up three or four
channels so far.
All right. So, I'll just say for him,
you know, and again, I have a limited
understanding of it, but basically this
bottom uh meter
uh kilycles is your AM dial. So, back
then it was called the broadcast dial
because it was uh you know, commercially
used basically. And then the other dials
were things like ham operators. So it
could, but you know, a ham operator is
not going to have a super powerful set,
not always. And uh you know, you need
different um amperage and stuff
depending on where you are on the dial,
I believe. So there were different
frequencies you could broadcast at and
things like that. So you can you can
actually pick up um ham operators
sending out things. Uh there's just all
kinds of uh things that can be sent out
on these other uh dials, but usually
most of it's not used and you'd have to
be
it kind of depends on the time of day,
too. Um some of that stuff, as I
understand it, you can get from all
around the world if your antenna is good
enough. And it it actually bounces off
the atmosphere and things like that. So
you can very easily pick up programs
from Europe and you know from Asia and
everything else that are bouncing around
the atmosphere and end up right here to
your little set. So depending on when
you listen to it or what time of day it
is or what the weather's like or how
nice your antenna is, you might pick up
all kinds of stuff. But down here on the
AM dial with just a line like I've got
for a antenna, you should be able to
pick up several different channels.
the two lowest power rated teams amongst
the powerful teams.
I always try to listen to WSM.
wherever they can find them, including
right here. They're listening to the
podcast. They could be listening to you.
Don't wait for everyone else to kick off
the holidays.
>> Killed by friends and welcome.
>> You're the first
introducing
I'm
>> eagerly waiting for Jesus to come. The
Take the free career evaluation. That's
my computer.
[music]
The WWBA. Let's partner up to grow your
business as they trust with no payments
in 20 m.
>> It's harder to grow, to thrive, to feel
their best.
>> Well, we always enjoy having Dr. Gary
Chapman's visit.
[music]
I don't am
Chuck and Johnson.
So, our officer
>> [music]
[music]
>> Everything has a new name this morning
as we roll.
tonight.
[music]
[music]
I got
All right. Yeah. So, it's working. Um,
so I'm going to see if I can align it a
little bit using these alignment
instructions.
All right. So, I'm going through and
aligning it the best I can. My little U
signal generator is a little bit off.
So, when if I'm at 450, that's at about
455,
which I've used a frequency counter to
check before.
Um, so
to adjust, so you said it's 1400
kilycles
and adjust CA, CB, and [music] CC. So
they have those labeled on this part.
It has this
really easy way to get to them here on
the bottom. And so you can go through
and just adjust them till you get the
loudest
signal. It was It was pretty far off
when I started.
So we're losing it.
It's peing.
Then we're losing it again.
Now you can actually check the output of
that, but that's not how they used to do
it. And that's not how they're telling
me to do it here. They're saying to do
it by ear, basically. Um, I know it's
more accurate to do it with a meter, but
I would just assume do it by ear. All
right, so I'm going to work through it a
little bit and
then we'll see if the reception's any
[music] better.
All right, I seem to be getting some
more channels.
Barely.
Can't tell what that is.
>> [music]
[music]
>> A great love of home.
The weary world
for a long time.
Guess
what? They they weren't promised.
to live in this way in the Bible
children in the covenant
>> in which you think that you can respond
through social media through the text
line anyway.
I wonder if the BFO will do anything.
That never works. It just gives you this
whistle.
>> Yeah, let's go to the other end.
>> I always have more trouble down on the
bottom end here at the house.
And it could just be because there's
nothing down there.
where they put him in in the game and
Baker like threw it to him to get to get
the milestone there in that final game.
I remember this because this is
something I talked about.
>> I can't ever get WSM. That's hard to
get.
No.
>> W.
I'm saying it's W.
Heat. Heat.
just $100
for
even more coupons. You can leave right
now at.comw.
>> This is what they call the hardcare
holiday. Uh that's at like 640,
>> but that could be 650 and it's just
misaligned a little bit.
>> Which means you'll get data driven
projections for quarterbacks, wide
receivers.
And I was just as happy as could be. I
Heat. Heat.
close and it was entertaining all the
way to the end. Yeah, fourth quarter was
outst
[music]
of something that you could so easily
give and you'll recover in no time.
>> And thank
Look, as you're getting close to 1110,
which is the clear channel station, it
starts swallowing everything
in Yugoslavia. [music] I'm going to have
become a plumber. And by the way, it's
no disservice.
>> And that's after I turned the volume
down.
>> Wouldn't have been
That's 80061697.
Tax relief advocates. Real solution.
>> Give us a call, son.
>> Join Mark Hypnosis and lose the weight.
Your money back guarantee only $59.99.
Hypnosis designed to destroy unwanted
cravings. Day eating binges, ordered
eating, stress eating. Also, stop
smoking with Mark Hypnosis. We lose
hypnosis. Monday, January 12th at the
Fairfield by Marriott ended streets at
the Highlands in Dry Adelia. 5:30 p.m.
Registration 5:00 p.m. Stop smoking
hypnosis 8:00 p.m. Registration 7:30
p.m. Sign up and at
markpickseminars.com.
>> Say good night to hunger this holiday
and help feed the children to put child
hungers to bed. Every child deserves the
food and essentials they need to rise
and thrive everyday. Together, we can
make a difference. Join our #PJSinpublic
challenge as we raise awareness this
holiday season. Prepare to get comfy, go
crazy, and wear your PJs in public, all
while helping to put an end to childhood
hunger. To learn more, visit the
children.org/quitchild
hunger to bed. That's the.org/quitchild
hunger to bed.
>> Running a business is hard enough. Don't
make with dozens of apps that don't talk
to each other.
>> Yeah.
>> For sales, another for inventory, a
separate one for accounting, a software
overload. Yeah,
>> that replaces them all.
>> I [clears throat] need another app to
fix my problem where I have too many
apps. Fully integrated and easy to use
for business.
Hey everybody
again
12 days of Christmas toys playlist with
the whole
>> Come on. Maybe you missed it the first
time. We detail the history of baby or
yo-yos and a whole lot more.
>> So, open your free iart radio app,
search stuff you should know, and listen
now.
[music]
>> Long time no see, buddy. How's it going?
When did you get back?
>> Hey, good to see you.
Make your first stop Matthews Auto
because nobody beats our selection and
nobody
>> lots of commercials
>> with 2500 world weather so you can know
what to cover. Sign up now at war.com.
Is diabetes keeping you from enjoying
life's special moments and users?
Visit da.gov/get
or call 1800662 to get started. People
are going to be alive.
>> [music]
>> What are you
[music]
[music]
latest
worldwide owned and operated.
>> I mean, there's a lot out there
>> from the Thompsonville, Illinois 7th Day
Adventist Church. And now, here is
Pastor John Lang with today's message.
>> The message today is entitled The Final
Showdown.
The final
Thank you so much.
Going deep. searching for decor.
[music]
>> [music]
>> Well, I think it's working pretty good,
but it needs I got the antenna just on
top of it right now, but it needs a big
long antenna to make it work even
better. So, I think I'm ready to send it
back to the owner, let him enjoy it. I
think it's safe to run now. He can run
it as long as he wants, as much as he
wants. He can do whatever he wants with
it, and he doesn't have to worry about
the capacitors burning up on them. So,
that's that. Leave your comments below.
We will see you on the next video, and
ho ho ho. Merry Christmas.
