Thank you to everyone who has been supporting our channel! If you use the link below before you purchase anything on Amazon, we get a royalty for sending you there, thank you!
Our store is located at 139 Caldwell St., Rock Hill, SC 29730.
ladies and gentlemen this is Joe's
classic video games back with another
cool arcade game repair video for you
this
evening you don't see this one too much
bump and
jump made by B Midway
I think this is only the third one of
these we've had haven't had one in a
really long
time so our friend
Jonathan you know the asteroids
guy he was out picking up some games one
day in
Tennessee which is a few hours from
us and the guy happened to have this too
and Jonathan he's just such a nice guy
he didn't really want a bump and jump
but he knew that I would probably buy it
so he ended up texting me and I told him
sure I'd like to buy that bump and jump
and he put it on the truck and he
brought it here and he told me exactly
what was wrong with
it it's
broke looks like somebody's already
started they we don't like it when they
do this can you see what they've been
doing
yep that's
right they started parting it
out so they took the monitor
out sold the monitor probably and it had
a nice little bezel little U tinted
bezel kind of like what Miss Pac-Man's
got and uh they probably sold it to or
threw it away or whatever but we got all
the pieces what we need I think because
we've got the Marque
we got the control
panel the board is down in
there the cabinet's in decent
shape and we've got the
bezel so really all we need is the
monitor a good workking monitor
board my phone made a weird sound I'm
hoping we're still
recording and a uh
we need the Tinted part but I've got all
those
pieces here's a go7 tube right
there it doesn't
really have too much burn in doesn't it
look
like which you can get away with a
little bit of burning because we're
going to put a piece of tinted Plexi on
top you'll
see and I've got these pieces here
oh Lord Ronnie I think Ronnie's been
moving my
stuff so that goes on the left of the
tube this goes on the right of the
tube a little tinted bezel goes
there we're just going have to I'm just
going to have to show you I
guess uh I think these are the right
size
probably I don't
know yeah that's probably
right all right I need my plastic piece
though where's my plastic piece what'
you do to it there it
is okay
so that goes on the left of the tube
that goes on the right of the tube you
see those little holes
there this little baby's going to lay
right on top of the tube I'm going to
screw it in with those
holes and see how that's
recessed this little tinted piece goes
in there like
that and there's some little screws and
clips that hold it all together you'll
see
and then we're going to
need these
pieces those two
bolts I wasn't prepared for this bolt
end there see those holes
there that hole that hole that's going
to hold that together and see that one
and that
one we're going to go right there see
how this is going to work here it's all
going to slide down in there I took that
off of Pac-Man or a gall ago a while
back and I've been hoarding them I keep
everything
so that's going to be what we got to do
somebody has repainted this at some
point
and originally I wasn't going to repaint
it but then I noticed this
side I don't know the side's pretty good
shape it's just at the
top and they match the color pretty good
that was the original
color I don't know if I want to repaint
it or not I got to go buy the paint yada
yada
yada I'll probably just paint the
black and if I put some fresh black t-
Ming on it it might help it out I'm just
trying to make it an eight okay you know
about the eights do we need to go over
it
again you can't make them a 10 you have
to make it an
eight because the time and money it's
going to take you to take it from an
eight to a 10 you're just never going to
recoup
it but anyway oh I forgot my chat my
monitor board I got a little go7 here
too found this in the back room the
other
day so I got to rebuild this baby change
the fly back change the
Caps change that little resistor there
Reflow everything yada yada yada put a
new connector on
it you guys know the
deal so I kind of got to get that
working first I got to get the monitor
in the
tube the tent around
it the little brackets on it and we're
going to slide it down in there hook
everything up so we can tell that the
board is in fact broke like we think it
[Music]
is well I got my monitor all fixed up
[Music]
it's probably going to need some tweak
in it looks like I'm a little too high
that way and all that
but I like to get it working over here
on the bench before I put it in the
cabinet just cuz it's easier to get to
everything
so now I'm going put my braces on and
then I'll put it in the cabinet and then
we'll probably have to do some
adjustments and stuff but we don't even
know if our board works yet so we'll see
all right we got the monitor in I don't
have it mounted over here yet because
those crossbars are slightly different
than the original bump and jump
ones that's what's kind of annoying when
people par games
out there's no way anybody needed those
cross barss they probably got thrown in
the trash and here I am cobbling another
set back together when you know it had
the cross bars they probably took those
bars off to put this put a monitor in a
different game and threw those in the
garbage it's just all those little
pieces like that you lose when people
start parting stuff out we like to part
them back in I couldn't tell you how
many games we parted in over the years
people uh people give up on them and
then we buy them and we part them back
in we like doing that I got my monitor
out of the floor I had an extra EXT
monitor there I got out of the floor I
got my bezels and all that stuff I'm
going to get out of the floor and back
into a game where it's supposed to
be and then we'll get this game back out
to somebody who's been looking for a
bump and jump
probably but anyway we got to hook up
the
monitor I don't know anything about this
game I got very little information
really all I know is it was broke
basically he started telling me
something yada yada yada blows fuse blah
blah blah blah blah but then he got to
the price and the price was so good I
had to buy it the cabinet was worth
that people start trying to tell me
what's wrong with it and all I hear is
blah blah blah blah blah broke blah blah
it's
broke so that's all that really matters
I mean obviously it's going to need some
work
see if I get my power hooked in
here maybe
yep ground I don't really care too much
about these grounds but since it's here
I might as well clip it
on does anybody know what that hippie
said power supply power supply power
supply
so this is the original power
supply that's the game board and we just
put the monitor back
in these original style power supplies
like that they rarely ever still work
you rarely ever see one that is still
working
fine they're in like super Pac-Man
Galaga used a similar power supply like
that most of the time people update them
to a switching power supp Supply which
is probably what I'm going to do some of
you guys might not like
that but uh you know I I try to take
think long
term if I put a switch and power supply
over
here and you know the thing dies in 5 or
10 years I can just mail somebody
another power supply and if they can use
a screwdriver they could swap it
out but if this one dies I'm not going
to be able to know exactly what's wrong
with it I'm not going to be able to send
them this resistor and have them solder
it in and all that so typically we'll
put a switch and power supply in them if
we
can but I'm hoping that's going to be my
issue I'm hoping it's not a board
problem it could be
though if it
is probably pass that back to Ronnie and
see what he can
do but let's plug it in I've not plugged
it
in so I'll get it
all plugged in and I'll be back and
we'll see what
happens all right I got it plugged in
here's my little interlock switch let's
see what it
[Applause]
does sounds like the monitor came
on so all that really tells us is we've
got AC coming from up there to the
monitor cuz we already knew our monitor
worked cuz it was on the bench
see if it tells us
anything no
image I don't know how
long I think it boots up pretty quick if
it was
working all right so now we got to find
a good spot on the
power good spot on the board check the
power supply I me so I'll uh I'll find a
good spot and I'll be
back
well I've got my black on the ground red
on the five I should be getting five
volts I'm getting one
volt that's not going to cut it
I actually checked it uh the 12 actually
is working but the five is way
low so I'm going have to figure out the
best way to put in a switcher in this
baby I got to tap into my AC down here
somewhere and I'll probably just wire in
a I'll hook up to some of these wires
over
here I just like to put the switchers in
there when I
can like it or not I'm putting a
switcher power supply in this cabinet
today got to put it in there
today and then after that we can chase
it a little bit further we may still
have a bad board but we got to get the
power over there first some of the chips
look a little
crusty there
there and
there but power supply power power
supply power supply all right so I
looked up the bump and jump pin
out and we've got the part side that's
the side with all the parts on it and
then we've got the solder side which is
the side with all the solder on
it and as you can see pin
one is going to be our 12vt pin two is
our
5vt we got our
ground and then on this particular game
we've actually we got two
boards so we got our video board down
here we got some grounds on and some
fives
on
so then I'm going
to take my little power supply I'm going
put some uh Spade connectors on those
wires that they're telling
me and then I'm just going to put them
on the power supply and that should get
us good 5 volt going to it and then
we'll see where to go from
there all right so I got my new power
supply in it's my new Switch and power
supply I got it mounted up
there I usually leave the original one
in just in case you know 10 20 years
down the line somebody decides they want
to put the original back in they could
all they'd have to do is put a new
connector on those
wires but our power supply had issues
and I like to update them to me they're
just more reliable that way
and you know if that power supply goes
bad if the customer knows how to use a
Philip screwdriver I can just mail him
another power supply and he can swap it
out that's my theory anyway I know some
people are they wanted exactly how it
was and I'm not really a stickler for
total originality when it comes to the
power
supply so let's see if that'll do
anything
[Music]
we've got sound or we've got
something well it kind of looks like
it's
playing but we've got something going on
obviously with the
display remember we had this monitor on
the bench working
so we
know the monitor is
good it kind of looks like some kind of
video ground issue to me but let's see
if it'll play or do
anything added
[Music]
credits looks like I'm driving
a jump button
worked so it seems to be playing but we
got some kind
of video ground or something going
on and and the
video comes down this
[Music]
connector and in this back
board so I'm going to take that
connector off clean it and uh see if I
see anything that looks out of
place
well all that was fine I made a rookie
mistake some of you probably know what I
did I'm just going to show you
everything will
focus you see what the issue is
there I got in a hurry putting the
monitor
in and I missed the connector by one
pin so everything was shifted slightly
over so the Green's on the red and the
Red's not even hooked up
and the ground is off a pin too so
that's why we didn't have any video
ground let's see if I can change
that it's always hardest parts getting
light where I can film it you know I
could just reach in there and move it
but you guys still can't see so I'm
going to reach in and I'm going to move
it bam
so that should be
fixed all right let's see what it does
now well that looks a lot
better that bar you're seeing that's not
in person that's just something the
camera
does we're still too bright and the
picture needs to come down a little bit
but we're not going to adjust that yet
cuz I want to put the bezel on there and
get
everything buttoned up and then we'll
start
adjusting
okay let's
see so this piece clips underneath these
two bolts
that one's
in that one's in there
had to use a
socket normally I use my pliers but I
couldn't get in there with
them that one
[Music]
[Music]
there we go
[Music]
all right
I had to look around for a while and I
kept digging and digging and I actually
found four of the clips and screws that
I need these are the original screws and
clips these are from like a Miss Pac-Man
or a Galaga but they're all the
same then this piece goes in there like
so
you don't want to tighten those up all
the way yet
because you got to be able to move the
Clips around to hold
the tinted uh plexiglass here in a
minute
can't
see there we go
[Music]
Windex probably wonder why I didn't
clean this before I put it on cuz I
didn't want to
had to get this live action
shot things I got to do make a YouTube
video around
here that's clean enough what do you
think it's by
all
right we got to clean off our tinted
plexiglass make sure you use that
commercial grade Windex
see it's too bright too down here see
how that's like a whitish
gray that means all your colors are
adjusted
right if it was red your red would be
too
high if it was purple your blue and your
red would be too high or your green
would be low actually so when it's white
like that all your colors are adjusted
good
so I dropped the quarter
inch
screwdriver and it's one of them real
long ones too you'd think I'd be able to
find it on the floor but I
can't you wouldn't even think that'd be
possible
so I had to get another
one and I'll find the other one later I
guess
hopefully tighten up your clips
all right so now I'm going to turn down
the brightness a little
bit that's pretty
good time for our bezel we got to take
the control panel off though
slide it back a little bit
always forgot to clean the front of the
tinted glass
Plexi supposed to remind me see we're
too we're a little too blue
now we'll get it
starting to look like something now
all right so I'm going
to I'm just going to do a few more
things to
it I think I'm going to change the t-
molding to kind of give it a little bit
more fresher look because it's cracked
in areas
and you'll see the the New Black te-
molding will just make it look a little
bit
fresher and uh I'm going to clean it up
a little bit and then we'll we'll try it
out and see how it
plays all right here it
is got it all finished up
I think it turned out pretty good
considering we started with a game that
somebody started parting
out I decided not to paint the
sides I'm just going to leave that for
the next
guy cuz uh it's supposed to have side
art on it
anyway and the control panels got some
wear on
it so I'm just going to sell it for
couple hundred dollars cheaper than I
would if I would have bought the side
art and painted
it it don't I think it looks pretty
good you got to know when to hold them
and know when to fold them I'm just
going to send this one on down the
line I got my coin door lights in there
I got the lock on it monitor turned out
pretty
good it's got a real nice Marquee on it
this is
[Music]
glass so I'm going to set up the
tripod and we'll play it for a few
minutes and see what we can
do all right here we
go I'm hoping the video turns out okay
I'm filming this on New Year's Day so
happy New Year to everybody it's
probably going to be a few weeks before
you see this
video but uh this game kind of reminds
me of Spy Hunter you know it's made by B
just like Spy Hunter it's a lot pretty
similar to
[Music]
me but you basically just try to bump
the
cars off the road and try to make them
crash
[Music]
then you got to
jump you got to bump and jump
oh
you can't jump if you run into the wall
[Music]
[Music]
[Music]
[Music]
jump I jump too soon to try to avoid the
wreck
[Music]
[Music]
think I'm getting
worse come on see he dropped one of
those kind of like the guys on Spy
Hunter
a
[Music]
[Music]
[Music]
[Music]
should have tried to
[Music]
move but there you go you get the
idea obviously I'm not very good at
it but we don't really play the games
too
much we have more fun fixing
them fixing the game is a game in
[Music]
itself but there you
go B's bump and jump thanks everybody
for watching we appreciate
it we'll see you on the next one