One of the ways you can support our channel, is by checking out the items we promote on Amazon. If you purchase any of these items, or even follow the link, it pays us a commission. Even if you purchase other products after following the link it pays us a commission.
At the moment, we'd like to show you this beautiful Weller soldering iron that we use every day in our videos. The Weller adjustable temperature irons work better than cheaper ones because they attempt to keep the tip at a certain temperature, and are a higher wattage. This helps you get nice solder joints and makes it easy to do repairs.
These links below are to this product in various areas of the world, thanks for watching!
Check Out Our Patreon Account, for Unreleased Repair FAILS, Concise Repair Tips Not Possible In This Long Form Video, And 1 on 1 Repair Assistance with YOUR Project!
Our store is located at 139 Caldwell St., Rock Hill, SC 29730.
Ladies and gentlemen, this is Joe's Classic Video Games,
back with another cool arcade
game repair video for you this evening.
This time we have Atari's classic,
amazing, Asteroids Deluxe Cocktail Table.
So, about a month or so ago, I had that Asteroids,
the stand-up, original Asteroids, I put the
blue T-molding on it.
If you watch that video...
Now you can watch this one.
If you did not watch that video, just go back and watch that one after
this one, I guess. But basically, one of our viewers saw that video.
He's a big Asteroids fan,
and he had an Asteroids Deluxe Cocktail Table,
but he wanted an upright. Most people prefer the
stand-up machines. The cocktail tables,
you got to have just the right spot for it, and it,
you know, they actually take up a lot more room.
Because if you've got a chair over here,
And then a chair over there,
I mean you might be able to get three stand-up machines in the space
that this is taking up.
But anyway, he didn't want the cocktail table, he wanted an upright.
And this this cocktail table's got a big problem with it anyway.
It's broke. So this is how he
brought it to me. Typical,
that's kind of what I was thinking it was going to be. He traded
this one in and gave me some money on the upright,
so it worked out good for me.
He picked up the asteroids,
brought me another Asteroids, and gave me money.
So, you know, I'm doing good.
So this is an Asteroids Deluxe, though. He had an upright.
This one does need a lot of work, though.
Remember, it's broke. It's been sitting somewhere
a long time. Lots of cobwebs. I think it's complete, though.
He had it, uh, he took it all apart when
he brought it down here.
So he had the monitor out of it, he had the board out of it, and he
had the power brick out of it. I've got it
in the other room. I'll show you in a minute.
We're going to start with the power brick,
but I wanted to show you how it is.
The board looks pretty good.
I slid it back down in there just for storage, really.
I don't really see anything really out
out of line there.
We'll be messing with that soon anyway.
We do have some burn-in on the monitor.
No big deal.
They all have burn-in, really.
That's why they put this tinted plexi up there.
Another look at this side of the cabinet.
Everything looks to be pretty good, really.
I think it'll clean up just fine.
Got to have
the vision start buttons in there.
We are missing that little door,
but I'll probably just have to make one out of wood.
Still got all
of the paperwork on there.
All right, so we're just going to do it how we always do it.
We're going to start at the wall.
How's that sound?
I'll show you the power brick, and we'll get to work.
All right, so here's our power brick in pretty bad shape, really.
I haven't had one this bad in a while, but it doesn't really matter.
It can all be fixed.
You know, it's just a little rust on it.
The fuse holders are pretty bad.
I may end up replacing that.
Um, but what I'm basically going to do is I'm going to sand it down,
get it as clean as I can.
I may repaint it. I don't know if I've got gold paint.
It don't really matter. I'll just paint
whatever I'll paint it.
Whatever I've got, maybe a gray or something changed.
I'm going to change
the fuse holders.
I'm going to change this capacitor, the big blue one there, clean it up
the best I can. And that's where we're going to start.
Like I say, I haven't plugged it in or
anything yet. Either way, this needs to be done.
I'm going to go ahead and do that.
get it all cleaned up we'll put it in the machine
and then we'll plug it in and see what the heck's
going on with it all right i got it all cleaned up didn't go too crazy
with it i just kind of hit
it with this uh wire brush knocked off all
the loose stuff i painted it i put a new fuse uh
block on it put a big uh big blue cap in it i realize it's black
but it's called the atari
big blue that's what it's supposed to look like
but the new ones you get now are black
But anyway, you don't necessarily have to change that, but.
I always do just because they're about $15
and they're getting pretty dang old now.
This filters the AC getting in on your DC voltage line.
So if this goes bad,
you'll be getting some AC voltage through and it'll make it do weird
things.
So I just go ahead and change it.
I sprayed the connectors with this contact cleaner.
This is some good stuff that we like.
Use this on a lot of stuff.
So I think the power brick is all ready to go.
So I'm going to put that back in the cabinet.
And then I'm going to take out the monitor, I believe.
And I'm just going to go ahead and cap it and reflow it.
And I could test it after I put this in there,
but I'm not even going to bother.
Because even if it worked perfectly,
I'd still have to take it back out and reflow it and recap it.
So I'm just going to get right to it,
reflow it, recap it, and then I'll test it.
And then I'll troubleshoot it if I have problems.
Okay, does that sound good?
All right, that's next.
Got the monitor out.
And the first thing I noticed, I was kind of looking it over.
And first thing I noticed was this connector here.
Did that happen
when he was taking it out of the cabinet?
I don't know. It doesn't seem very loose.
It looks like it's been like that a long time.
You know, it's supposed to be down like
this all the way down like that.
So am I going to get that lucky? I don't know.
But either way, like I say,
I've got to take all this back off anyway and cap it and reflow it.
Somebody's actually already been in here
because this screw's missing and this cap has been changed already.
But they didn't do these other ones don't look like.
But anyway, I'm going to take it out, reflow all these connectors,
check the fuses that are on it, and change the few caps.
Yeah, they definitely didn't change these two.
They may have changed those two, but they didn't change these two.
But I'm just going to go ahead and rechange all of them.
And got to do that for the high voltage unit too.
Somebody's been in there because it's missing one of the screws also.
So there's a couple caps in there I've got to change.
Reflow this connector.
That's all I'm gonna do and then we're gonna try it again.
Well try it for the first time actually
because I've never even plugged it
in but you know he told me it was broke. Well I don't know
how well it's going to come in but see this connector right there?
Got a bad solder joint
around it. That could be our problem.
I can move it with my finger.
I can't show you very good though
on the camera. Well you can kind of see it there it's moving.
That could be our issue.
But again, you just want to basically shotgun it,
is what I call it. I'm going to go ahead and
reflow all of them, change the capacitors, and then we'll try it.
All right, I found another
slight problem. Remember
when I was telling you these two caps have been changed? I think I said
that one's been changed too.
Well, these two were original, and I've capped quite a few of these,
and I thought all four of those caps were supposed to be the same.
So since these were original,
No, those were actually 2.2 uF 100 volt.
But this one over here.
They had a, well that back one was, remember all
these are supposed to be 2.2 100 volts. So these
two were the original ones. I put new ones in,
but this one over here, they had a 3.3, 3.3,
which maybe they didn't have a 2.2 and that's what they put in there.
Might've been close enough,
might've been fine. But then on the other one,
this one, they had a 22. I guess they didn't
22. Supposed to be 2.2.
There you go. So they're supposed to be 2.2
and they had a 22 in that one and a 3.3 in that one.
These two were right because they were still original.
Anyway, changed them all,
got them all the right value. Now we're going
to move on to the high voltage unit. Four caps,
bam, bam, bam, bam.
Reflow that connector right there
and that's going to be it.
Ready to test. Not much solder on that pin there either.
I've already reflowed these, so that's how they're supposed to look.
Yeah, it's a pretty good dab of solder around each connector.
I just wanted to show you that one before I reflowed it
and resoldered it.
It may have still been making connection,
but it don't look all that great, you know?
Well, before we put the monitor
in and I don't have as much room,
I figured I'd go ahead and test the power supply.
You know what that hippie said?
Power supply, power supply, power supply.
So I've got it hooked up on my DC on the 5 volt.
We got 12
instead of 5.
So that usually means this little baby here is bad.
I got them in the back, so I'm going to swap that.
And that's a 3055.
I'm going to swap it and try it again.
Well, the 3055 got our power supply back down how we needed it.
But then I had to put the game board in to tweak the voltage.
So I'll show you.
I've got 5.1
on the board now,
5.1 on the board.
It's making a chirping and almost sounds like a resetting sound,
so that's probably not
a good sign.
We're going to put
the monitor in next,
just to see the monitor.
So there's just one plug
on the whole monitor
on this one that runs the power
and the connector.
We don't even know if the monitor works, you know.
We know nothing.
All we know is it's broke.
Here we go.
Don't catch on fire.
Got bad luck with fire.
Is anything happening?
We've got
neck glow.
This is what I thought.
It's broke.
So we've got
some kind
of board problem.
Test will
tell us
anything.
Not
really.
Tell us nothing.
Normally, like on an Atari game,
it's supposed to have like loud tones and low tones.
So it'll go,
something like that.
And it kind of tells you what chip is having an issue.
But yeah, this one is just,
that don't tell us nothing.
So we'll take the board
out.
Now we got good voltage going to the board.
I guess we're gonna end up going to Google a little bit.
I may try to clean these ROMs just to make sure.
Could just be a bad connection.
I usually start there,
and if the chips and the sockets all look good,
I'll try it again, and then we'll go to Google.
We might have to break out the logic probe,
which I don't really like to do,
but gonna have to, looks like.
Stay tuned.
All right, so I started cleaning the ROMs and all the chips.
Now take this one out,
And I noticed that leg there at the end.
Well, that's not all that uncommon, so I kind of bend it back,
clean it, went to go put it back in, and then I realized one
of the legs, somebody's been messing with this board,
and this socket has a leg stuck in it, so that's why this leg was bent.
And here it is on my little scope, microscope.
See it right there? So that I don't think that leg was touching,
so that maybe that was our problem. It's one of our problems anyway.
Remember, the power supply was putting out 12 volts on the 5.
I didn't plug in the board that way
but you know the previous owner did.
So I'm gonna try to clean this socket.
I'm gonna try to get that leg out of that socket.
I may have to replace the whole socket
and then I'll try it again but somebody's already been
messing with this board because obviously this isn't the original ROM.
I don't even know if this
is the right ROM so I'm gonna have to verify all the ROMs now too.
So this can't be the original chip
because the original chip leg is stuck in the socket
so they may have all the ROMs in the wrong order
This might not even be the right one.
The 12 volt could have fried a lot of stuff on the board.
I'm gonna keep messing with it here
and I'll be back whenever I figure something out.
Well somebody was trying to rig up this socket
so I'm just going to replace it but you can see what
they're supposed to look like.
I don't know what the heck they did there. It's almost
like they stuck a cap leg in there
to make it make connection.
Replace that socket
and then we're going to verify the ROMs and then we'll try it again.
All right, all the ROMs seem fine. I'll put the socket back in there.
Sounds a little different now.
It's not clicking and chirping.
Yeah, buddy. It's in test now
because I was trying to see if it was giving me
an error before, remember? All right, that all
looks pretty good. Might need to adjust it a little bit later,
but let's put it in game mode.
Yeah, buddy. Dang, it's even got high scores
on it from who knows how long ago.
Yeah, buddy. We're in a track mode, people.
We are in a track mode. You know what that
means? We're going to make that money today.
Yeah, buddy. I guess I should see if we've
got sound before I get
too excited and see
if it'll play. Player one.
My fire button's
not working,
but that could just
be a dirty contact.
Yeah, buddy. Well,
I'm pretty surprised
that was all that was wrong
with it. It's crazy. You'd
be surprised how many games I
By just taking it out, looking at the chips,
cleaning the chips, and putting the chips back in.
I know that I changed the socket on that one.
But yeah, apparently all that was wrong with it.
The socket was messed up.
Me and Ronnie got this thing that we say a lot.
We never really say it on video, I don't guess.
But a lot of these games don't get fixed
because people don't even try to fix them, you know?
I think anybody could have fixed this if they would have actually took
the time, sat down, and tried to fix it.
We changed the big blue.
We reflowed a few things on the monitor board. Changed the capacitors.
We did know that those two capacitors
were wrong just from experience, but if you
checked the manual and stuff you could have figured that out.
And we did fix the power
supply just like the hippie said.
Power supply, power supply,
power supply. It's even saving the
In the top three scores, it's pretty wild.
And I wonder who this is.
PTC.
I guess I'm going to start buttoning this thing back up
and then we're going to move over to cosmetics, I guess.
All I got to do is put the monitor back down in there,
get all the cobwebs off.
I'm going to clean the buttons, may replace the buttons.
I don't know if I've got enough.
I don't know if I've got 10 more white leaf buttons,
but take a magic eraser to it.
And I guess I'll be back with you whenever I get it finished up.
I don't, you know, you don't want
to watch me clean it all up with the Windex, do you?
Just, all right,
well.
As that I'll be back in a little bit.
All right I got it all finished up. I think it turned out
pretty good. I've got new buttons on the one player side
and the two player side. The corn
door bulb is working and I added that door down there.
I made that little door for it. It was
missing originally and you know it would have
been easy just to leave that door off or just to screw
a plate over the door hole but I think that being able
to take that door on and off just adds a lot
It makes it more of a complete package.
And it was also missing.
Uh, these little rods in here,
these allow you to take off that side door over there
to access the power brick and adjust the monitor.
It was missing these.
Luckily, I was able to go to Lowe's this morning
and they had this 3/16 weldable cold rolled
rod here.
I bought a couple of those.
I was able to cut one in half though, and it was pretty much perfect.
But again, I could have just screwed
that little panel on there probably, but
It's the little things like that. It brings it all together.
It looks like an eight out of a ten
to me. And the last one, you know, I sold to a YouTube viewer.
He came down. He was an Asteroids
fan. So I'm just going to let you know,
if you want to buy an Asteroids, I've got this nice
Asteroids cocktail table here.
I'll take a thousand dollars for it. OK, you have to drive
down here and get it, though. I'm not going
to ship it unless you want to sell me the money
and you can set up the shipping on your end.
I don't mess with the shipping.
I used to, but it ended up being kind of a nightmare for me.
So I just let the buyer handle all that.
You give me the $1,000 and you can do whatever you want with it, okay?
And I'll give you a tour of the place.
And I may even throw in a t-shirt if you come down, okay?
How's that sound?
But anyway, it's a pretty nice machine here.
I like it.
I think it turned out pretty good.
I'm going to set up the tripod and we'll play a game.
Obviously, I'm going to tell you right off the bat,
I'm not any good at Asteroids.
You know, Asteroids is a pretty tough game.
This just wasn't my game. I'm better at Ms. Pac-Man.
I'm pretty good at Ms. Pac-Man.
But a lot of people say, oh yeah, I can roll the Asteroids.
I rolled it over on the Atari 2600.
I was never any good at it. But anyway, we'll play a game.
See how it goes. All right,
we're going to try it out. I'm just terrible.
I am terrible at Asteroids. And I had an Asteroids
table a long time ago as our second machine.
Our first machine was a double dribble.
But that was the JAMMA game.
If you know anything about arcade games, it was JAMMA.
And then we turned it into a WWF Superstars.
And then we played that for a while
and we turned it into a WWF WrestleFest.
We played that for a while and then we turned it into a Combat Tribes.
And somewhere along that time,
we actually got an Asteroids cocktail table just like this.
My dad used to work for Terminix and he was in the...
He always had a truck with him because,
you know, he was driving the Terminex truck
and I guess he was doing the routine pest control on a house one day
and the lady had an Asteroids cocktail table that she wanted to get rid
of and he ended up bringing it home for me and Ronnie and Donnie.
But it had a problem. It was broke and we never did fix it.
We didn't know. We just didn't know how to do it back then.
It was our second machine and now we've had a ton of them.
But uh, we ended up selling it broke years later.
We never even tried to fix it.
We had no clue what we were doing back then.
But anyway, I'm gonna try to play this thing. I'm not any good.
We'll see how it goes. I just don't have a good strategy.
Let me know down in the comments what the best strategy is.
Am I supposed to stay in the middle?
Am I supposed to run around the whole time?
What's the deal?
See?
That's how
it usually
goes.
Terrible.
Didn't
see
that
little
one.
I
didn't
even
know
where
I was. I
got too
crazy.
That's how I check the phone.
That's how a typical game goes
for me on Asteroids.
Everything works good on it though.
I'm just not very good.
Like I say, this game's for sale.
If you're interested in it, take a thousand dollars for it.
Everything works great on it.
It's been fully serviced.
You saw what we did.
If you don't want to buy a game, that's fine too.
We just appreciate you watching our YouTube videos.
That's fine.
And with Christmas coming, you know,
a lot of people buy their presents on Amazon, you know.
And if you wouldn't mind, if you click our link below the video,
you have to hit the more button
in the description. And if you click
that link before you buy anything on Amazon, it sends us
a tip for sending you there.
So it works out good for us and it doesn't raise your prices at all.
So if you're buying a $20 item, it's still $20.
You just, they give us 50 cents for sending you
there. And that adds a lot, you know,
that helps us out at the end of the month. It adds up,
you get a couple hundred people doing that,
ordering several things. But anyway,
thanks everybody for watching. We appreciate it.
We'll see you on the next one.