We Finished This Williams 1963 Major League Pitch And Bat Machine....

Joe Classic Video Games
197 followers
1.1K Video Views·Jan 17, 2025
ladies and gentlemen this is Joe's
classic video games back with another
cool pitch and bat repair video for you
this evening this is a Williams 1963
Major League pitch and bat machine that
we've been working on we've done tons of
videos on it so far if you didn't see
those this is like the sixth or seventh
video in the series but this is the one
where we're going to do the Cosmetic
stuff so um we've repaired everything on
it or pretty much everything on it still
waiting on a little bit of stuff but uh
we're ready to paint it now so I'm just
going to show you the condition that
it's in and then we're going we're not
going to stencil it we're just going to
paint it back by
hand um to the color that we believe it
originally was basically this thing has
yellowed over time or you could more
accurately say that it's greened over
time um I think the paint just get
darkens up a little bit and it loses
kind of some of its red
pigment so it appears that it's all four
color
so there's a base color there's like a
tan color that is the baseball bats and
the
stripes and then also the visor of the
ball
cap um there's
black and then there's orange and that's
it just four colors so there's a base
coat a little darker tan orange and
black um but this is what we're starting
with now there's different levels that
you can do this the correct way to do it
the best way to do it would be to take
it all apart Bondo It Up Sand it down
get it down to
barewood um fix all of the places that
need a little work get it smooth get all
the old paint off make a set of stencils
and all that we're not going to do all
that because we just don't have the uh
the ability to put that much time into
it so what we're going to do is we're
going to sand off some of this loose
paint and then by hand we're just going
to paint in the missing paint so for
instance this orange just take a orange
paint and paint that back by hand it
won't have the
overspray these were painted by stencil
in the factory and if you look really
close see the overspray on the
orange so it won't look perfect it won't
look like a a really nice restoration
wheel but it'll look a hell of a lot
better than this um if this wasn't quite
this bad we would just leave it
but it's so bad we got to paint it it
just it's never going to look
presentable in this kind of condition um
so we've got that uh the other thing is
on the base coat originally there was a
splatter paint so if you look on the
inside here it's it's painted the same
color see how that looks dirty or
whatever that is the splatter paint from
the factory so they would paint it all
one color and then they would paint this
on it
so if you can't tell what that is
they've painted gray paint on it in like
a kind of splattered
effect and then there's also like a red
painted on there in kind of a splattered
effect there may even be three colors
but but you can see how dense that is
there's just so much splatter on it very
hard to replicate that so we're not
going to do that either we just don't
have the ability to do it
um the reason that they did that was
because it hides flaws in the plywood so
these are built out of plywood and if
you look here there's a biscuit right in
the
middle of the
plywood so this was not um cabinet grade
plywood this was just cheap plywood that
they used because it was just an
amusement machine and it was mainly for
kids so it it didn't really have to
look you know perfect or anything so if
it was all one big color you would see
every little flaw in
which you know you might see after we
get done doing this so they put this
splatter effect on it because it's a
trick of it it hides any imperfections
um by giving it a little bit of texture
it's just a it plays a little trick on
your eyes now if you look here there's a
couple
more see the biscuit there and the
biscuit there I guess they're called
biscuits there's another one there so
it's just cheap grade plywood that they
were built out of I'll show you in the
back here
right that's just how they were built
this was made in
1963 so this is the shape that it's in
when we're
starting and uh Joey's going to repaint
it we're also going to do all kinds of
other cosmetic stuff on it we've got to
clean the Playfield still uh I've got a
replacement plastic piece for this the
Home Run um
um apron or whatever you call that home
run Target Plexi and I've got a
reproduction back glass for
it so all of that uh will make this
thing look a heck of a lot nicer now the
Running Man unit um the backdrop on it
is still a nice shape we also need to
fabricate some little plastic
windows for this lights shine through
there um these have broke over time and
if you put clear ones you can see the
light bulb so I'm going to try to see if
I can get some like some white ones that
I can cut or I'm going to see if um we
can paint them or something so that you
can't see it whenever you're playing it
um if you look at the Running Man unit
you can actually see a reflection of
those two
holes and so you can see the light bulbs
the whole time you're playing it um if
that's clear so we don't want it to be
clear there's also one above the Running
Man
unit right there somebody mentioned in
one of the previous videos uh I wonder
if they put the wrong size bulbs I'm
sure they did you know if they would
have put like 10 watt bulbs or something
in there they wouldn't they never would
have burnt that but they probably put a
100 watt bulb in it whenever the the
bulb burn out and it just melts that
thing up but time is taking its effect
on it too so it's no big deal though we
can fix it so that's what we've got to
do um we're also going to paint the
targets so they need a little bit of
touchup
but they look pretty good so I don't
know if we'll get all that done in this
video but hey we can try so the first
thing we're going to do we're going to
start painting the cabinet and like I
said we're just going to paint it by
hand and uh we'll see how that comes out
[Music]
n
[Music]
[Music]
n
[Music]
[Music]
[Music]
[Music]
oh
[Music]
[Music]
[Music]
[Music]
two
[Music]
oh e
[Music]
[Music]
n
[Music]
[Laughter]
[Music]
[Music]
[Laughter]
[Music]
[Music]
a
[Music]
a
[Music]
C
[Music]
a
[Music]
n
[Music]
n
[Music]
e
oh
all right folks it's time to swap this
back glass out now the glass that's in
it I'd like to save and try to repair
just so I can hang it on the wall and
sell it here in my shop even as
deteriorated as it is so basically the
paint is just falling off of it so I'm
trying to keep as most of it from
falling off as possible so that there'll
be something to say um I can fix it if
it stays halfway hanging on there like
it is right now so that's my
goal so the way you're supposed to
remove this thing is this other side
over here comes
off so this side can come off so we're
going to carefully remove that and then
see if I can wiggle the back glass out
of there without this big chunk falling
off
hopefully well that came off easy easily
enough but
unfortunately um the the top doesn't
come
off and the bottom doesn't come
off so because of that the only way for
it to come out is to slide out and the
problem is some of that
paint is hanging off the back of it far
enough that it's going to hit when it
comes out so it's going to peel off some
of that
but I really don't have any choice I'm
not going to break the top of
the case
apart so we'll see what all it loses
it's going to lose some of this but uh
we'll just do the best we can and see
what we can
do all right so it lost quite a bit of
it we were able to save some of it but
it is what it is it was already heavily
damaged I didn't do it it happened years
ago we just uh pulled the Band-Aid off
okay so here is the uh back box after
removing the uh little pieces of paint
from it I'm going to go ahead and Swap
all these light bulbs oh look some were
burned out or not even in
there so I'm going to uh change all of
the light
bulbs and we'll go from
there all right looks much better with
new bulbs it originally had 44 bulbs in
it we put 47 bulbs in it which were like
40% dimmer and 40% uh less wattage you
can't hardly perceive that they're a
little bit dimmer than it it cuts down
on your heat and all of that um you
could put LEDs in it but I don't like
LEDs so and then another thing I wanted
to point out this is kind of interesting
we've been repainting the side I don't
know how well you can see it right now
but this is where the trim was obviously
you see the line so this is the original
paint
color and it's very close to the paint
color we've put on it we've we've
significantly lightened it up but it's
pretty much in my opinion dead on what
the original color was so I think we
that we accidentally matched that pretty
well here's how it looks now this part
hasn't been
painted and here's new paint old
paint pretty close really I mean it's
dead on it to be honest we don't have
the splatter paint on it though like we
mentioned
pretty wild okay well that worked out
good okay so uh I think we're ready to
slide the New Black back glass in it if
I can find it I've had that thing for
several years just waiting on the time
to work on this thing but I've got one
around here somewhere let me find it and
then we'll slide it in
here all right so that's what it came up
looking like I think it's really
nice uh as I remember this is a second
we got somewhere somebody wasn't happy
with the color of the grass or something
like that um personally I think it all
looks
great that's why I bought it cuz I knew
that I wouldn't mind whatever little
minor differences there are I don't
really see anything jumping out at me
that's just completely
egregious uh the art looks like a very
nice copy I would imagine some of the
colors are probably slightly off or
something but I mean I am you saw what
we're working with here this is much
nicer than what we
had red the extra ending part is orange
which I think is
correct uh the outs are red that's
blue I don't know it all looks good to
me certainly good compared to the one
that I was messing with up here you got
the Williams and red and then the 1963
and orange so I don't know maybe some of
that's different you know some of the
things that are orange maybe they're
supposed to be red and some of the
things that are red maybe they're
supposed to be orange
but
folks I think it looks
great just what the game needed that's
basically what that's what was keeping
the game from
being um savable that back glass was
just in really bad shape I was hoping
that I could save it I hate I hate
replacing them I'd rather just fix the
old one you've seen me paint like a
freaking 50 of them but uh that one was
so far gone it's just wasn't anything
you could really do we are still going
to clear it and hang it up on the wall
though
um which we'll do on this video so
you'll see it um but yeah let me turn
off the lights so we can see what it
looks like in the
dark beautiful and keep in mind we
haven't uh worked on the lights in the
bottom part yet we'll put new bulbs in
there and that will change how that
looks I don't even know what types are
on there you can see the match numbers
at the top 0 1 2 3 4 5 6 7 8 n you may
have been able to see that on the
original class too I'm not sure it
lights up evenly
um just looks great I've had a lot of
people tell me that uh sometimes you
need an LED on these to make it a little
brighter but I like it how it looks I
think it looks
great very nice yeah I think that really
helped it and I just love how it I love
on this game it has nothing to do with
the reproduction back glass but I love
on this game how they've um Shadow boxed
kind of
the down there I I want
to we're going to put some different
covers on these bulbs down here on the
Playfield I don't know how that will
change how they light up but uh that may
change how that looks too you know
so we'll
see yeah I think that really saved the
game that just makes it look so much
better so this is how we save it I have
sprayed triple thick all over over
it Crystal Clear glaze this is for
pottery it's basically very thick it's
like a thick clear coating so I have
sprayed the crap out of it and then all
of
the uh paint That's lifting I have put
Saran Wrap
over and then you can now I can touch
the Saran
Wrap because the paint's on the other
side and you can press
down the the paint now most of this is
in the place that it's supposed to be
anyway look look at
this you can kind of press it down where
it
goes I didn't get the Saran Wrap
perfectly flat so that doesn't
help look folks we're doing the best we
can um but you can press it down get it
as flat as you can and then put
something heavy on it while that paint
dries and it will dry with that stuck in
it like it's in a like super glue
basically after it dries once it's
completely dry you'll just be able to
peel the Saran Wrap off and all of the
paint will be stuck to the the back
glass it's not going to look perfect but
it'll look better than it does and it
will ensure that the rest of it doesn't
fall off I got to work on it for a
minute
though all right so here in our store I
have hung that back glass up on the wall
here we have a green wall so it'll hide
a bunch of the uh Missing paint and it
looks kind of cool
so someone will walk in one of these
days and they'll want that for their
game room and they'll buy it this is
right by our uh football Marquee that
we've had all this time that was gifted
to us it's still hanging on the wall and
then we have a birdie king golf Marquee
hanging there too so we have golf
football and baseball it all makes
sense
Perfect all right back to the game
okay folks so it's time to swap this
plastic piece which is freaking ugly oh
looks horrible someone was saying uh
that I should put LEDs so that the the
new bulbs don't do that look A bulb
didn't do this for it to be this bad off
this is it was probably stored outside
where the heat did it from the
Sun um which would explain the whole
cabinet having bad paint and uh the back
glass being destroyed and all that it
was probably in a shed or under a
carport or something like like that for
a long time and the heat you know with
the glass here it kind of makes like a
greenhouse effect and it'll do stuff
like that so that would be my guess but
no light bulbs didn't do it there would
be a light bulb here and here and
they're kind of in the wrong spot even
cuz the bulbs don't quite line up
something like this could be a light
bulb but I don't even think that cuz
there's no bulb
there this is like it got cooked it got
baked as Shango would say it's been
baked
all right so I've got a brand new one
that they made it's a reproduction uh
the only trouble is going to be getting
the screws in the right spot because
there's no holes on the new one so let
me take these screws off and take this
one off we can finally get rid of
it okay so here is the replacement
reproduction piece uh that goes on it
unfortunately these were made by hand um
a gentleman was restoring one and he
made these by hand and he made a bunch
of extra ones that you could buy it's
the only way you could get them
uh it's got a couple problems though one
it was made with water slide decals so
they have they have um shrunk slightly
over the years I've had this about four
years and so there is a
line around the decals and unfortunately
it's not even straight because it was
all made by hand so you can see that
line um I don't know if you
can yeah see we're going to be able to
see light through it
um so I'm going to have to try to paint
the back of that white and see if we can
get that where you can't see it as
much right and then the other thing is
the um the shoot
part I think it's supposed to go in the
the shoot but it won't it's slightly the
wrong size so because of that this won't
lay flat like this is supposed to
be about like that
I guess you could force it I don't know
so it's a little loose but I'm just
going to put screws on the edges to hold
it in place
it's it's uh nobody else makes these so
it's really your only option unless you
made one better yourself which is not
easy that's why this one isn't perfect
um so I'm thankful that it's available
at all without it this machine wouldn't
really it would look like crap you know
I'd have to rig something up with a
piece of plexiglass or something so it
looks pretty good it's pretty nice but
it's not quite right that's to be honest
though most reproduction parts that's
kind of what you end up with um whenever
people completely redo a machine and put
every reproduction part that they make
on it usually you can tell just by
looking at it that it ain't quite right
it's kind of like how we painted it here
it's not quite right like that looks
right this doesn't quite look right CU
it's a little we don't have the splatter
paint right right so that's just how
things are but that's cool um so I'm
going to get find some screws and I'm
going to Mark kind of where the screw
holes
are and then uh drill some little holes
in the Plexi or the plastic and put it
on okay so I repainted the white on the
back over the lines that has clean that
up drilled a couple little holes where
my screw holes are already in the uh
wood so we'll let that dry a little bit
now we need to paint on the targets a
little bit so here are the targets up
close this is what we're starting
with like to clean that up a little bit
and you can see that the way the ball
swings I mean the bat
swings just like in a real baseball game
um most of the hits are going to right
field do I have that correct yeah that's
right I haven't played baseball in a
long time uh so you got a whole bunch of
them that are singles outs doubles you
can see there's less as it goes along
and then the triple's kind of hard to
hit because there's a ramp in front of
it and then the double the same way it
would have to cross over the ramp to hit
the
double right but it kind of can hit the
out but it's kind of hard to hit the
single because if you're a little bit
too far this way it'll bounce off the
wall and hit the out so um you can just
see what the natural wear pattern is of
it over the
years you could repaint all of the green
on this and make it look pretty good may
end up doing that but if I can get a
green that's close enough I'll just
touch up the line across there but it
would be easy to just paint the whole
green
part
right uh and that would be most of it
the white you H well it'll look good if
we can get like some off-white on there
too how is that wet oh that's oil from
when I oiled
it need that off of there um and of
course the black would be easy to put
back
all right so let me see if I've got a
green anywhere near that or if I just
need to repaint all of the
green festive green was pretty close but
it wasn't close enough so I just
repainted the whole thing so it's still
real wet and sloppy but uh I think it's
going to dry pretty flat and look pretty
good and of course I have to trim it out
and do some of the white still so that's
the first little bit we'll let that dry
for a
while okay so the green is dried and I
used a little bit of buttermilk light
buttermilk to touch up the out and the
single and the bottom of the double
slightly different color but if you look
at the ones over here they faded a
little bit from the wear and there's a
slightly different color it's very
similar to the slightly different color
over here so I think it all looks pretty
decent all right so now I'm going to
take a black acrylic paint pin and draw
the black lines back in just to make it
all kind of come together a little bit
touch that up a little bit by hand and
that should make it look very
presentable and then we'll put some
clear coat on it to protect
it okay so this is the kind of acrylic
paint pins we use uni makes them they're
called
PCA they're really cool they're uh
they're an Italian
company but uh it has M it has Japanese
ink in it no I got that all wrong
they're a French company uh but they
have uh Japanese ink in them in my ever
ending never ending quest to not buy
China um and they're pretty high quality
so they're acrylic so I use acrylic
paints because it makes it easier to
clear coat if you just take like a
rattle can clear coat you can clear
things that are acrylic paint without
the paint running if you take a rattle
can Rustoleum or Krylon clear coat and
spray paint over uh oilbased paint
sometimes the the uh the Catalyst in the
spray paint interacts with it makes it
run and get all drippy and look like bad
mascara so you don't want to do that uh
so I use acrylic and then I clear coat
over it so I'm going to spray some
rattle can clear coat over it and that
should protect it now somebody was
asking what the little standup men on
the uh the base running unit are made
out of it's a it's like a card board but
like a true board made out of card so
like a really thick uh cardboard so if
you look if I get close to it you can
see it's actually it's not paper it's
card board um you might call it Masonite
board so I think these will look pretty
good once cleared and uh they're not
they don't look
perfect uh but that's fine with me
nothing I ever do looks perfect so um
I'm completely fine with them having a
little wear to them and if you look
close enough you can tell that
somebody's touched them up so that's
fine with
me okay so that's it with the new
plastic installed and with the the uh
targets painted and clear
coated I think it looks really good
it'll look better once we plug it back
in and get the lights on too but came
out pretty
good I didn't put any screws on the
bottom because again that thing is kind
of sticking out too far um just the way
it's it's made it doesn't quite fit down
in that shoot I looked at the pictures
uh of the gentleman he did this awesome
restoration of his and I think he had
the same thing going on with his that
maybe that's just how it was originally
or how the one that he had to copy was
um it's not perfect but like I said it's
much better than I could do trying to
make it my own and it's um it's the only
one available so at the moment that's
the best that we have for it and it's
not that different from the original one
that I've got laying around here um you
might be able to well I don't want to
mess with it I'm just going to leave it
exactly how it is uh and I think the
targets look really good
you know you're looking at them from a
distance and to me that's about as good
as I could possibly get it I think that
looks a heck of a lot better but you saw
it up close so you know that they're not
perfect
um but yeah looks great okay on to the
next
thing so one of the next things is it's
viewer mail time
now if you would like to send us viewer
mail this is our address Joe's classic
video games 139 calwell Street Rock Hill
South Carolina
29730 I'm Ronnie Joey's Joey um look at
this it's from the great the great 51st
state of
Canada Canada has sent us uh has sent us
a card I hope y'all don't take that too
seriously come people it's just it's
supposed to be funny uh this is from
Murray in Canada Alberta C uh that's
Alberta Canada as far as I know I
haven't been up to our 51st state yet
but one of these days I will make it up
there it says peace is always beautiful
Walt Whitman the place where my house is
uh Murray is
called uh Walden on
Carmel obviously named after the great
Walt
whitmann and it says Ron Joe and Donnie
thank you for thank you all for another
great year of YouTube content May the
peace and beauty of the Season be yours
throughout the year best wishes for the
new year take care Murray from Canada
well thank you Murray I appreciate that
and uh we will uh hang on to your letter
as a gift from our good friend Murray
from Canada thank you sir we appreciate
that I would send you a card but it's
already past Christmas but thank you for
your car um we appreciate the sentiment
and uh we appreciate you thinking of us
uh here it's at the beginning of the
year now but here as the new year starts
so thank you we really appreciate that
now back to our regularly scheduled
program all right so we're going to
clean up the Playfield a little bit but
one of the things I wanted to address
was this bat is a little bit out of it's
too far forward of course we're upside
down right now but it's it's kind of
like all the way across the plate which
I thought looked a little
weird um it's supposed to be down a
little more kind of
even with that third Baseline there so
it should be this end should be way back
here so if you look at
the
unit
this this piece
here is the shaft going up through
it so it rotates that is the piece
rotating the
bat and so the reason that it's like
that is because they've got this stop
adjusted too far down it needs to go
farther up that way which would allow
this to travel more which would make the
bat
rest um farther down so I'm going to try
to loosen that and move it up this track
here I can't tell if that's where or
that's how it's designed or what I guess
that's how it's designed you wouldn't I
don't see how it could wear like that
but they've got it too far this way so
we need to move this back which will
allow this to go out more which will
actually lower the
bat okay so by adjusting that uh down
the track a little bit and tighten it
back up I was able to get it to line up
pretty good so I think that'll be good
and it still has nice um a nice Arc but
of course that's going to completely
change how it plays
too but that's much better it makes more
sense um before it just it seemed weird
so we may actually have to turn the bat
power down um again but we'll play it a
little bit and make
sure uh but yeah that was kind of
nagging me so I like that a lot better
okay so I think next up is we're going
to clean the play field so I'm just
going to wipe it down I'm not going to
go crazy with the Magic Eraser because
uh this has a nice Sheen to it and I
don't want to sand any of it so we're
going to go um I don't I'm not going to
touch anything up we're just going to
clean it up a little bit B and uh then
I'm going to wax it and get it to look
as nice as possible we need to clean the
bat of course and then up here there's a
little bit of
Hardware need to clean up that area get
that post out of there put a new ring on
it and then we can put new balls in it
and it'll be ready to play I'm going to
leave these they're a little dirty but
they have a nice wear to them you know
I'm not too worried about making this
all look brand new or anything even if I
had the skill to do it that you know now
you may be wondering why there's these
holes here these originally had the
Playfield screwed down in them and a lot
of pinball machines actually did way
back and so the screws are actually
still in
it but these were mounted here and the
reason for that is it um it just makes
it play more consistent and stuff if
everything's nice and solid um I saw an
interview with Steve Richie one time
where he was saying that at the factory
he used to um whenever he was designing
a game sometimes he would just screw the
Playfield down and it played better so
you know he would know more about it
than me um but I since we're always
under there messing with something I'm
going to leave all that out it makes it
easier to get under the Playfield I
don't know that it would change it too
much on a pitching bat but that's what
they're there
for um so yeah we're going to clean it a
little bit make it look a little better
and we'll go from
there all right I cleaned it up waxed it
made it actually shinier of course so
that's cool and uh that's the only ring
on the whole game
so nice and
new uh so the Playfield is pretty much
done we' still got to watch light bulbs
to make sure that they're the sockets
are clean enough and things like that we
still have to do these little plastic
pieces that Shield the bulbs and new
bulbs um
and then the same above
the Running Man units I think the next
thing that we're going to do though is
we have to add the bells back in so one
of the Bells is still in there but
doesn't work the knocker has been
removed and the other Bell has been
removed so we're going to add all that
back
in so with the Running Man removed you
can see what's going
on we have a 5-in bell
there and it looks like let me see if I
can get down in
here one of the wires is plugged in and
one isn't so I should be able to just
plug that back
in so that's obviously that
one now the other ones these new ones
that I've got don't
have um Jones plugs on the
coils so I'm going to have
to just solder wires like they are in
most
machines but that's okay so for whatever
reason they took them out and then taped
up the
plugs so that should make the 5 in Bell
work and I don't see any
reason I don't see any reason that they
took it
apart there we
go all right so these two
I'm going to guess go to the knocker but
we'll look on the schematics if you can
tell what color that wire
is right and then over
here all of the black ones are going to
be the
same that's
the power feed the bells are just
shorted to the power
all right and this should be our last
one likely for the small
belt right and those should mount on the
wall
there maybe the Bell was there and the
knocker was there that would be my guess
or maybe I'm backwards no I think I'm
right so the knocker is there it's a
little taller and the bell was
here okay so I ordered those from
pinball resource let me show you what I
got all right folks this is what we got
now keep in mind the pinball resource
makes stuff for gotlib pinball machines
but they
um uh of course A lot of the stuff is
similar in Williams and stuff so this is
what's available I need to check that
coil they acted like they were going to
put the right coils on it for me I'm
going to check to see if that's
compatible with what we've got
and this
one right so this is what our small coil
is going to sound
like I love it and this is what our
knocker is going to sound
like I don't know is that I guess
that's I guess it's louder whenever it's
like actually putting itself in
ain't that loud but I'm sure it'll make
a knocking sound okay so uh we got to
figure out how to mount these I'm going
to look up these coils to make sure that
they'll run off of the voltage that
we're using which I think is 24 volts
okay so I looked them up this one is
actually the correct exact coil that
would have been in it originally so
that's exactly how it's supposed to be
this one is not it's the Gotti one but
um the gotlib games I looked it up run
off of uh 25 volts and the Williams
games run off of 20 four volts so
it's if it's good enough for the goose
it's good enough for the gander folks so
if golb is fine running this coil as
their
knocker Williams was running the exact
same voltage it ought to do just as well
in Williams now some of you people that
really got your stuff together might be
able to hear the
difference between the Williams knocker
and the golb knocker because they
probably used a slightly different coil
but I'm quite okay with using this one
in there
all right so now I need to find a
picture or something or I I think I can
do it from the schematics by the wiring
color like I said of the uh the wire
that goes to the lug to tell which one's
here and which one's
there all right people we gave it its
heart back so it's got its small bell
it's got its knocker all wired up and
it's got its big Bell uh I just removed
the Jones plugs if you don't know how
these work if you heat heat up the
basically they stuck the wire in this
pin and then just filled it up with
solder so they they uh they heat it up
and so if you heat it up heat the solder
back up and pull the wire out it goes
the other way too and another thing
these are not actually called Jones
plugs we refer to them as Jones plugs
but they're really A Jones like plug
they're not actually Jones plugs these
are just uh connectors that Williams
themselves made if you look at the ones
that got Li made they're slightly
different and etc etc so it's it's it's
not really Jones plugs which were named
after the guy that
invented the Jones plug all right so I'm
going to put the Running Man unit back
in and hopefully that stuff works and I
don't have to go digging back in there
again but they're all plugged in so it
should be
fine
um and what else do we have we have to
put the little plastic window in and the
two in the front but I don't have that
in
yet uh and I was going to put
some
um uh veranee or something on here to
make that look a little
better um and there was something else
what was the last
thing I got I got something else I
supposed to still do but we're getting
there okay folks we've gone about as fur
as we can go on it so here's how the art
came out remember you just saw us paint
it by hand so the finish underneath it
is not in perfect
shape it's not perfectly smooth you
could do a much better job if you sanded
it and uh used filler on it and you know
you could do it all the way but it would
take a lot of work more than I'm willing
or maybe even capable of
doing um for
a machine that you know at the end of
the day we have to sell and it's going
to just increase the price even more
than it already is but I think it came
out pretty nice all things
considered um it's still got things
carved in it and everything but I like
it I think it looks much more
presentable
um love that Running Man unit we're
still waiting on the couple pieces of
frosted plastic that go above that and
back here where the lights
are um
but I put a
little
um lacquer on the wood trim there made
it look a lot better I
think and boy it looks nice in the dark
doesn't
it such a cool
game now it's really fast it's hard for
me to play with one hand let me go get
the tripod and I'll set it up so we can
play it a little bit
uh and you can hear the bells I forgot
you haven't heard those yet have
you all right so that might be a good
vantage point because you can see the
runs the outs you can see the little men
run the bases and you will see the
targets get hit too and you might see if
I get lucky I might knock it up the ramp
into the into the uh the U Hopper
there she's quick
W she's quick extra ending when lit I
would love to get that oh that'd be so
cool to get that on
video missed it and it hit the out come
on
now oh it's still on it o I wonder if
you get an out it doesn't move the wheel
so it doesn't turn that off oh
interesting too
early come on ramp
H it was you realize how close that was
I hit that if I would have been over
just a little bit Wham probably would
have
worked oh you heard the
bells so the ding the light the light
one is the uh
the hit you've got a hit and the the
louder one is that you've got a uh a run
ooh look so I get a
redo extra ining when lit I would love
to get that I already did it on on one
of the videos but I think I faked it
didn't I just threw the ball
[Music]
in
nope now you don't have to wait for the
ball to come all the way back but the
thing is you can't hear you can hear the
the pitching unit working and it helps
you time the swing so I'll show you the
next time I miss one I'll throw I'll
pitch another ball before that one gets
work it's going so you can
see or so like what see so you can you
can you can pitch more than one if you
miss it now you may have not even saw
that I missed that
[Music]
oh I might 19 to beat
okay
o barely missed the ramp we may have
even went over the ramp a little bit on
that one that's how it got up in the
air too
early Extra Inning win lit
[Music]
nope now if it had that slow ball it
would be even harder because you'd have
to time it just right you know CU you
wouldn't know what's coming the slow
ball or the fast
ball but I know that the fast Ball's
coming each time okay we got 13 runs
only one out I might actually make it um
got a guy on second and an extra inning
when
lit nope there's my out oh
no barely oh I got a triple
cool all right I'd love to beat that
score to beat so we can hear a knocker I
haven't heard it
yet I'd love to get an extra inning too
though you
know oh come
on oh I had
it I had
it it popped back out it hit something
and popped back
out oh there's my out oh come on come on
I was robbed okay we'll play one more
game
but now I got to get 26 come on that
ain't going to
happen we'll go faster this
time
triple
single oh was it out
too
quick too
quick out again oh no I've noticed if
you if you speed it up and play faster
uh you make many more mistakes because
like I said you can't time it without
hearing the
motor little too
early
oh just like that I only got four runs
that time all right so what a cool game
what a cool game I think it looks great
too
beautiful so I'm going to put it here in
my store and if someone wants to
purchase it they can come purchase it
but if not I'll just keep it for a while
look I've got a spot for it right there
it can be right there and then I can
play it whenever I want what do you
think about that so I'm happy to get
that fixed it was in our front window
next door for a long time just sitting
there all dilapidated like it looked at
the beginning of this series if you
didn't see that um but it's cool that we
were able to get it going again so I'm
very happy with it if I ever find the
stuff to make it the slow pitch work
I'll put that in there but it's
unobtainium I've been trying to obtain
it and I have been unable to obtain it
people have mentioned oh you could make
it you could but there's a uh there's a
bracket that holds it in place the the
coil in place and then there's another
bracket that holds the front of the coil
in place those could probably be rigged
up uh I looked around I couldn't find
anything similar on on other things um
except that pitching unit but the
problem is there's a special little
lever that interacts with another lever
that in my opinion would have to be
pretty precise to make that break work
right on the side of that um pitching
unit and I just I don't have the ability
to create that myself so that's that so
I hope you enjoyed it people this is
Williams 1963 Major League now if you've
been with us this whole ride we did a
whole other one one time that was the
year before this before this Williams
1962 World Series so there was one that
had been kind of hacked up because they
had it at the beach uh making money and
they had taken out like the thing that
counted the Innings and the thing that
counted the strike I think there were
strikes um and things like that so they
had they had completely manipulated the
thing and it was in much worse shape
than this one but we did an entire
playlist of that so if you want to see
that I'll put it up right here I hope
you enjoyed the video and we will see
you on the next one
