Cleaning And Inspecting A 1927 Junghans Grandfather Clock Movement

Amateur Repair Time
259 followers
307 Video Views·Aug 3, 2025
Check out our Patreon page, for all of our channels. Contains outakes, concise arcade repair tips, bloopers, repair FAILS, Audio youtube wouldn't allow us to upload, and much more!
https://patreon.com/JoesClassicVideoGames
------------------------------------------------------------------------------------
Ladies and gentlemen, welcome back to
Amateur Repair Time. We've got a
beautiful one today.
If you didn't see our previous video, I
picked up this grandfather clock um for
about 20 I think it was $25, something
like that at a at an online auction
because a couple of the pieces of glass
were broken in the front door. And so
the I did a video on this already where
I showed kind of how we found it. Um and
then I went through all of the minations
to get the glass made, ended up having
to make it myself, put it back in there.
Uh
uh put glazing on the door, strengthened
up the glass, mounted it all back in
there, and uh got it here to the office.
So
there is the pendulum, there are the two
weights, and here is the movement. This
is just an absolutely beautiful clock. I
love it. It's a Germanade.
I believe that you pronounce the name
Yunghan. Yunghan clock. Um I need to
find somebody talking about that online
so I can see how they pronounce it. But
it's a really famous German clock
company. Um, and so today we are going
to work on the movement.
So I wanted to show you a couple things.
Well, here's the glass that was broken
last time.
I'm going to throw this away. I mean,
there's no reason to keep it. I hate
throwing vintage things away, but what
can you do? It's broke. So, this is one
of the pieces. This was in the bottom
down there. So, what I what I ended up
having to do was these two pieces are
actually flat glass. The rest are still
beveled. There was one broke here and
one broke here. And I took the good
beveled piece from here and put it up
here. And then I put two new flat pieces
here. You can't hardly tell. Like from
here, you can't I mean, you cannot tell.
So, I think it's going to be fine. And
then the piece that was in the bottom
down there is this piece. It was already
flat glass because they had already
broken the beveled glass at some point,
I would imagine.
Uh, I've noticed while I was working on
it when there's no movement in it and no
weights in it, the thing is front heavy.
If you open the front door, if you're
not careful, it'll just fall right over.
Um, the movement was still in it
whenever I bought it. But it could be
that when they moved it, the weights
swung into the glass and broke the
glass. The whole thing was kind of
fragile and flimsy, but I I glazed it.
So, these white lines you're seeing are
the glazing, and it has really
made it nice and solid. I mean, you can
you can tap on and slap on the glass and
it's not going to come apart or break or
anything. So, um I'm real happy about
that. Okay, but we got to get it to run.
Now, it may run fine the way it is, but
I'm going to disassemble it and clean
it, put it back together. I think I've
got the skill now to do that. Um I've
been working on these clocks now for a
couple years and um
I don't I'm obviously not an expert.
This is amateur repair time, but I think
that we can do it. By the way, the
reason I call it amateur repair time is
because I I wanted clocks to be a big
focus of it. So, like it's I like doing
the radios, I like doing the record
players, but I also like doing clocks.
So, um
if you haven't seen
uh most of our channel, we've done
videos on a lot of this stuff. So,
uh we did a video on this.
We did a video on this. What is that
under it? I can't tell from here. Uh, we
did a video on this, on this, on this,
and on that.
Um,
we did a video on this. We did a video
on that. That was a gift from someone.
We did a video on this.
We did a video on this and this and this
and
this and this.
And I think that's it of those.
And we've got other stuff. We did a
video on that. We did a video on that.
We did a video on this. So, we've done
Oh, I didn't show over here.
Video video.
And I think that's it of those so far.
That's the That's the click clocking
you're hearing right now. This is a Tik
Tok video, one of the good kind. My
weight driven clock has stopped. I
wonder if it's because it's only a one
day clock. They might have an issue or
something. Anyway, all that to say, I've
done quite a few clocks, so I think I've
gotten a little Oh, we did a video on
that, too. I've I um I think I've gotten
better at them. So, I think I can handle
this. Hopefully, I won't destroy it.
I wonder what that mark is that we're
seeing there. All right. So, let me turn
around and show you the back of it, and
then I'm going to show you what I found.
Um,
researching it
a little bit. I didn't research it a
bunch, but So, here is the I think they
call this the seat board. Here's the
movement. Um,
the uh suspension spring is broken,
which is common. You know, I I want to
bring this out. Get this out.
so that I can order one.
And uh I might be able to measure it if
most of it's still there.
Yeah, it looks like maybe all of it
still there. It just broke in half.
So maybe I can measure that and see if
it lines up with what I think the
thing's supposed to have.
But new suspension spring might be all
that it needs. But we'll we'll do the
rest to um to my ability at least. It
has five rods inside. But I did notice
that there's only three different size
rods. Two of them are doubled up.
All right. So, it's going to play some
kind of little melody. Um,
I was trying to see if maybe there was a
like a music box type thing going on,
but there's not. Let me get this out of
here before we screw up this pallet
real. All right. So, looking at the
back,
I got this makaker mark, Yun Hans, and
then it says Worerenburgg. If you look
up Worthingmberg, that's an entire area
of Germany. I'm not even so sure that it
necessarily still exists. And by the
way, to all of my German viewers,
I completely understand. I don't know
what in the world I'm talking about. So
if you want to chime in and correct me,
feel feel absolutely free. Um,
Worthingmberg, Germany, uh, was an area
of Germany that doesn't really exist
anymore. Like it, I mean, of course,
it's still the same area, but this is,
uh, you know, preWorld War II stuff. And
so this has been renamed or something
now or something like that. But anyway,
this is, uh, a part of Germany that this
was made in. And the Yunghans,
if I'm pronouncing that right. I guess
it could be Junghans. It looks like Yung
Hans to me. I'm I know my German
accent's horrible. I'm trying the best I
can, folks. Yung Hans is a huge clock
company that's still around. And this
date, this is a date right here, it
appears. So, I believe that this is
December
of 1927.
And I believe I can kind of prove that.
All right. So this W
178 is interesting that I think that is
the number of the movement. It's like
the what do they call that? Not sequence
number but um
they number each movement and they
literally have that many movements and
this is in 1927 they had that many
movements already. So, it's it's a huge
company that has made millions and
millions and millions of clocks, which
is good because if we end up where we
need a part, hopefully we can get our
hands on one.
Um, if you look
here, there is a string tied here. And I
think that was
okay. Interesting. So, I think maybe
what I did just now was turn off the
melody but leave the strike on. So,
maybe these two are the strike and these
three are the melody, the chime.
Oh, yeah. Look, they're all on the same
bar. So, those are not going to
chime independently. They can't.
Okay. And then these are on the same
bar. Okay. There we go. So, we're only
going to get We're not gonna get too
much going on. It can only move. It can
do this. It can do this. And it can do
this. And that's all it can do. So, I
don't know that it'll play any kind of
melody. Um, you can see the grease
stains down it, the oil stains down it.
Um, maybe real quick we can look and see
if we see any like major
wear on the bearings. That might be
interesting. But then I want to show you
something on um online.
Look at this. This is interesting. Why
is that like that?
Now, this on these, you don't have
springs, so you don't have to worry
about letting the main spring down or
anything because it uses weights and the
weights are off of it. Very little wear
wear there. Now, I'm used to the
American clocks. The American clocks
were built fairly sloppy. I mean, they
they didn't even have to be that
accurate
to run right. it just they kind of
loosely put them together
and um if they were close the things
worked and you know kept pretty good
times. So I'm not saying that they
weren't good and you know I'm an
American. I love American clocks but
when you're talking about a German clock
or a Swiss clock well known for being
very high quality.
So, I'm just looking at each bushing and
I'm what I'm doing is I'm putting my
hand inside and just trying to wiggle
the the um
the arbor just to see if or not arbor,
what do you call it? The the um pin the
the pivot
just to see if there's a bunch of wear.
And I don't see any unless they're under
a lot of tension somehow and it won't
let me shake them. It looks like
everything's fine. Now, this is the the
chime side.
or the strike side. And um
I mean there's a little wear there it
looks like maybe but it um it doesn't
matter as much on the strike side.
I don't see anything unless these wear
heavily on the front. I don't see
anything. It all looks great. And who
knows, maybe this thing's been sitting
around for 50 years uh with a broken
suspension spring and never even got
used that much.
So, here's a look down in the top. Look
how they've done the pallet
where you can it appears remove the um
or I guess the the piece you can remove
is the pallets
and that's the verge. Well,
no. This is the ver I mean, it's kind of
the verge. The whole thing's the verge,
right?
Okay. Um, you know, unless we get in
there and we find something just
completely destroyed, I think we're
going to be looking at something that's
in very nice shape that just needs
cleaned up a little bit.
But we'll get more into it. Okay. So, I
want to go show you what I found from
Yunghan.
Okay. Okay. So, I'm on their website
which is Yunghan's
archive.de.
Just just Google Yunhans. Um, and
apparently it is pronounced Yunghan. So,
apparently I got that right. Look at
this. They've made 500 million
time pieces because they make a lot of
watches, too. And they're still in
business and still kicking butt. Okay.
But look at this. They have a digital
archive
with all of their cataloges and stuff.
And I'm talking hundreds of catalogues,
right? I mean, this is a significant
company. So, you just you pick the year
you want,
right? Um,
now a lot of this might not be in
English where I can't read most of it,
but look what I found in their catalog.
Look at all these beautiful clocks and
stuff.
Let me see if I can find it.
Look at Look at what we see here.
Yeah. Interesting.
Um, so these are their grandfather
clocks. That's not the catalog I was
looking at. Let's see if I can find
which one it was in.
Perhaps this one.
Here
we are.
Okay,
look at these two beautiful clocks.
So, it says Walt to Wald Wald Tuful.
Walt twoful, I would guess. The Walt
twoful three and the Walt twoful four
four. Ours is the one on the right, the
Walt twoful four. Well, if you saw the
previous video, I was really kind of
concerned about the white glazing kind
of standing out and making the glass
look a little lighter than it looked
before. But to be honest, I mean, in
their photos, they represented them that
way. Now, it's black and white, and we
know that the dial is brass or or gold
colored, so it could be that they're
just showing you that the the uh trim on
the window, the the lead on the window
is gold, right? But if you look from a
distance,
you you can very easily see
uh the the leading or whatever on the
window. So my my whole point is the only
reason I didn't like that it had the
white look on the glazing was because it
made it stand out a little bit, but
that's how it looked in the catalog. And
that's a photo. I think I'm pretty sure
those are those are photos. Either that
or they're very nice drawings. Um but
that's a photo and they wanted it to
look that way. So, I'm, you know, I like
it. And then the other thing is if you
look, so there's a couple more things.
If you look at the clock to the left,
it's the exact same clock. It just has a
different door.
But what struck me as the most
interesting is look at the position of
the Bob.
This is a legit company. I mean, so if
I'm sure most of you are probably clock
people, so you understand, but the the
length of the pendulum determines how
fast the clock runs. So if the bob was
lower like this than this one, this one
would run slower and this one would run
faster. So the way that you compensate
for that is you change the escapement
wheel or you change a little bit of the
gearing in the movement so that it can
use a different length pendulum. If you
notice the faces are at the same place,
right?
So they made two completely different
well not completely but slightly
different movements just so that they
could have the bob hang at a different
length and the only reason is because of
the construction of the door. It's all
an artistic thing. So the bob is way
down here because it just looks nicer
down there. If you can imagine if it was
up a little bit, it wouldn't look quite
as nice. It looks really nice right
there. And then the bob over here, they
don't want it down that low because of
the way the the beveled glass is. They
want it up a little bit. And so they
they've they're regearing the movements
just to accommodate stuff like that. And
that's why that one was a number 138 or
whatever uh the movement was, you know.
And if you look here close underneath,
that's I guess a part number. Does it
say 38?
No, 28. What's it say? I can't hardly
see.
28.95
and the preceding one is 28.94. So this
is their catalog from 1927. So certainly
they were making that clock in 1927. So
that's probably exactly what that date
means.
Um, okay. So, the last little thing, wal
Wald twoful walled twofold
means
uh uh
wooden
um not wooden,
it means forest devil.
So, this damn clock's called the forest
devil.
Uh, okay.
And it makes sense because there's
little leaves up on the top. There are
some little leaves here, right? So, they
were kind of trying to give it a earthy
like a foresty look. Um,
just so cool. So, I got to start
collecting these now. They're they they
make some seriously cool clocks. I have
another one here in the house that's a I
don't know if it's a a Yunhan though,
but it looks very similar. So, I have
this beautiful little uh mantel clock or
shelf clock uh with a similar dial, just
a, you know, round gold dial, which I
guess doesn't say too much, but it does
look a lot like that um that one. So, I
don't know if this is a German one or
what, but we'll eventually repair this
one as well. So, yeah, our forest devil
clock here needs a little attention. See
the little leaves on it? It's the forest
devil 4 people. Well, the other ones
were Forest Devil 1, 2, and three. Um,
but just a absolutely beautiful design,
I think. But you see what I'm saying
about the glass? It's a You can see all
of the lining, but you could on the
picture. They kind of were showing it
off. So, maybe they wanted it to look
like that. I'm not that worried about
it. Um, all right. So,
we need to kind of disassemble this. So,
I think,
let me see here.
How hard is it going to be for me to get
the face off? Look, the face.
There's some pins already out of it. I
probably shouldn't have it leaning on
the the dial like that in the first
place. Let me Let me take the hands off
and take these pins out.
Is there only one holding it on? Yeah,
there's only one holding it on, it looks
like. Let me see if I can get that off
so that we can get down to just the
movement. So, the face came right off.
And if you get close, someone has worked
on it a little bit. Look, they did it
like I do my pinball machines.
They've touched it up a little bit, but
at, you know, it proves my point about
the pinball machines, too. I couldn't
even tell.
I've had it for a little while now, and
I couldn't even tell. Okay. Oh, and the
back of it is very solid like uh I don't
know if that's
cast or or what, but it's very this the
face is very heavy.
All right. So, with the uh clock came a
little bag and it had these two, which I
guess probably have something to do with
holding the seat in. Probably those.
And they have a little washer on them.
Uh this
which maybe we'll need to take something
apart.
And then this which is probably the
other end of that wire that we saw that
was broke or that
cord that was broke. That allows you to
maybe turn off the uh
one of the strikes or something. Maybe
if you do that it makes it more quiet.
So maybe it still strikes but not as
loud. That's the one up there. That one,
this little snail here
is screwed up on that one. So, it can't
hold the hourhand, right? It's made out
of plastic. I got to get one. We'll work
on that in a later video some more. We
already worked on it in a previous
video.
Um,
okay.
So, I guess I have to decide how much of
this am I going to disassemble? And I'd
kind of like to disassemble all of it so
that we get it right and clean and it
works for a long time after this. Look
at this here.
What is that all about?
H interesting.
All right. So, let's look from the side.
And this thing is heavy. I mean, it's
probably at least 10 lbs.
So, I don't believe that I can lay it
flat on its back or flat on its front
without damaging
either this or this.
I could take this off,
but I don't know about all this over
here. Oh, well, it looks like maybe all
that comes off, too.
All right, let's see what we've got here
in the way of
gearing. We got one, two, three, four,
five, six,
seven, eight,
9, 10, 11, 12, 13. Looks like we've got
13
pivots in there. Something like that.
So, that's not too bad. And then a
little bit of stuff on the outside.
Okay. So, uh, yeah, let me see if I can
figure out what I want to take apart
first.
Okay, so I've removed the suspension
spring.
And on the top, it has a a large hole
because a little screw goes through it
to hold it into the bridge,
right? Goes through it into the
the forks of this suspension bridge, or
I guess I think that's what it's called.
Okay. And then on the other end, there
is a small hole that this little pin was
in to hold it into place. So, I'm going
to try to order that exact same
suspension spring. I think you could.
I'm not an expert, obviously. I think
you could get away with using one that's
a little bit different, but if you can
get the exact same one, I say let's go
for it. Uh, Times Savers has a few of
the they, you know, they list them all
by size, but they have a few that they
actually list as for a Yahan.
So, we'll see if we can order another
one.
Okay, so this is with the back plate
removed. Um, I was trying to go in
through the front. I got most of it off,
but there's one little wheel that I
cannot get apart.
One of these. We'll have to look here in
a minute. But, um, so this is kind of
what we're starting with. So, this is
the strike side, which you can tell by
the little
levers on some of the gears.
Don't worry about it, folks. We'll put
it right back together.
You know, it's kind of they kind of go
smaller as it goes.
Strike side. I mean time sign
time side
we'll do strike side over here
obviously the escapement wheel
the governor the Arnold
See the little pin? There's always a
little something extra on the strike
side.
This is the one I'm having issues with.
There's a little thing on the other side
that I cannot get to come off. It's just
pressed on.
This one had one on as well, but I was
able to get it off.
Basically,
this has a matching piece on the front.
And then this is our center wheel.
This is the strike chain
big wheel or first wheel I guess they
call it
winding arbor
side.
winding arbor for the time side. Notice
the three different gears
plus the sprocket.
So time side, it's three gears and a
sprocket.
Strike side.
Uh
is that two? How am I counting the other
one?
Yeah, three gears in a sprocket. Strike
side, only two gears in a sprocket.
Okay, so I got to figure this out now. I
was finally able to get it off.
So, that's a good thing.
So, it's completely disassembled. Boy,
she's going to be clean when she goes
back. I'm not going to do a darn thing
to the pivots other than clean them.
Um, I mean the bushings other than clean
them because I don't I didn't see any
kind of wear. I mean, I didn't see
anything that was a problem that my
untrained eye could notice.
I think the thing's going to run just
fine. It probably already ran just fine.
I will say though that a bunch of the
pivots, they were just kind of stuck in
play. like they weren't stuck, but if
you moved them, you could feel a lot of
resistance just from grease and dirt.
So, it it can do with a good bath.
And you saw the grease stains, the oil
stains. See them? So, you know, that's
not that's not great.
Okay, I still got to take a few of the
things off there, but I'm going to go
ahead and put these all in the
ultrasonic cleaner and then we'll see
how they look and then we'll start
putting it back together. It's literally
as simple as that. It's not going to be
any big deal, people. But I need one of
you to tell me which end was up. I'm
once I figure that out, I'll be able to
get all of the rest of it on there. I'm
sure which end was the top top.
We'll we'll we'll figure it out.
Well, the ultrasonic cleaner again
remains undefeated.
That's pretty wild. I don't use like the
expensive um cleaning materials. If I
did, it would probably get even cleaner,
but I don't really care if it gets super
clean.
Um,
you can see that grid mark is because it
was sitting on the bottom of the uh the
metal basket that's in there. So, it
doesn't get it perfectly clean. If I put
it through again, it would probably get
it even cleaner, but I don't really want
it to look I might polish that a little
bit so it doesn't have a pattern on it,
but I don't really want it to look brand
new, you know? I want it to look a
little worn, but it me it almost gets it
looking brand new.
All right, so surely I can put this back
together. I mean, it's not that many
parts, right? My favorite thing is what
it did to the leather on the hammers.
Look at that. It made them They were all
nasty before.
I don't know if you caught a good view
of it um previously. I actually, while
these were cleaning, I looked up
uh if Times Savers sold replacement
leather, and they did. You can get
replacement hammers, but I would hate to
replace the whole head, you know, on a
on a I would rather keep the original
ones, but they make a replacement
leather, but this cleaned up so
perfectly,
you don't need it. It was It was all
discolored before and everything.
I actually thought that they were white.
I thought it was like some kind of white
leather, but they were black. So, I
don't know. It was It was just
completely backwards from what I
thought. Um that ultrasonic cleaner,
too. It won't break stuff like cords.
So, it just cleaned that up. So, I took
the um
Oh, yeah. That was the one. I took the
the piece that had broken and just tied
it back on.
um because it's probably been like this
quite a while. So, I don't mind leaving
it like that quite a while longer. And
then this was the one that was on the
front
that I'm sure that's not factory, but
they do have a spot for it, you know,
and
that is a spot for it, too. So, there is
a, you know, they do want you to put a
little cord on there. Is that the
original string? probably not, but
might as well leave it. Okay, so I have
to polish all the pivots and stuff.
Um,
and so the the way I've been doing that
is I've got a really fine sandpaper,
like 20,000 grit,
and uh you just turn the pivot in it two
or three revolutions just to clean up
the just to basically polish the the
pivots.
These aren't pivots. The This is pivots.
Um, these are little studs that were on
the front plate. So, the plates got
pretty clean. I actually had to polish
them by hand a little bit, which you can
kind of tell cuz it's a little streaky,
but I think it looks all right. Um,
basically, I couldn't fit the whole
plate in. So, it would part of it would
stick out and then this part would have
a line.
And then if you turn it upside down and
run it through again, when you take it
back out, there'd be a line over here.
And I think each time it was probably
getting it brighter and brighter, and I
don't really want to get it all that
bright. But interestingly enough, after
I did that, um,
I found some more markings. So, this is
the front plate. Were they on here?
Yeah, here's something. So, I figured
we'd look at that and see if we could
tell what it what they are.
You can see where there was a line
there. So I or maybe it was right there.
So I had to hand polish it to try to
clean it up a little bit. All right. So
I see this. Let's see what this is.
Huh?
What in the world is that? I thought
that was like lettering.
Maybe a spring or something can mount in
there and it holds in place
by those little things. I don't think
it's damaged. It looks like it's made
like that.
I don't know. All right. So, there's
that one.
That doesn't say anything. I thought it
did.
Then here is the
back plate.
It's actually stamped on both sides.
That's pretty cool.
So, this is the outside. This is the
side we were looking at.
2712
Wenberg
Yunhan's
W1 178.
I saw
there is a list of all of their U
products. I'm going to look up that
W178. See if it tells me anything. I
mean, obviously it's from this clock,
but Okay. And there is a 60 up here.
I wonder if that's the drop.
Can't be.
So the drop is from the pendulum the
suspension
which is a little higher than center of
that dial down to the I think the the
end of the bob.
Would that be five feet? I don't think
so. That's more like four feet.
Yeah. So that can't be. Four feet would
be 48. So I don't know what the 60 is.
And then here's the inside.
Same thing. They just don't have the
date on it. And that's it.
All right. So W1 178. They had a list
somewhere of all of their products. Um I
guess it was on their website. Let me
see if I can find that. Well, I found
what I was looking for. It was on their
website is uh they call it caliber, but
they don't list the um tall case clocks.
It's just they just list um pocket
watches and things like that. So, it
wasn't on there, but I did find someone
that had this same uh W1 178 in a
similar case. It wasn't this exact case,
but it was one of the ones with the oval
doors, which as I was saying earlier, I
thought um would probably have a
different escape wheel
because the drop's different, but it was
a it was a slightly different cabinet to
it. It wasn't that exact one we were
looking at. So, I don't who knows?
All that to say,
they made a lot of clocks.
One thing I was noticing too is these
two chains. This one
was gold. This one, I don't know if it
was ever gold. So maybe one of them's
been replaced or something.
I don't know.
But there you go, folks. So, I guess now
we got to put it back. Where should I
Where did this
There was I know that's at the top. Is
that the
Maybe that's the
I'm going to have to think about this a
little bit. All right, folks. We'll see
you back here next week. Hopefully,
we'll get her back together. Now,
if you enjoyed this uh beautiful clock
so far,
a while back, maybe a year ago, I worked
on that one a little bit. And it's just
a it's got like a cuckoo clock movement
in it, and I need to order a replacement
uh snail for it. Basically, it can't
hold the hourhand. The hourhand keeps
dropping. Um so, there's a little
plastic part on the front. It was a real
cheap movement. You'd think in that big
old clock that it would have a nice
movement, but that's not a very old
clock and it's got a little tiny
cheapo movement, but it is running just
fine, right? So, if you want to see that
video, check this out. But we'll be back
next week u where hopefully we can get
this movement back together and bring
this clock back to life probably for the
first time in a very long time.
