I picked up this vintage 1950s United electric novelty clock at the flea market for just $3. It had broken and missing pieces, loose internal wiring, flaking paint, and plenty of mysteries.
Join me at the bench as I tear it down to see how the animated fishing mechanism worked, clear-coat the fragile dial, and try to get the electric motor running. Stick around until the end when I unexpectedly stumble upon another Huck Finn clock out in the wild.
Would you have paid $25 for the donor clock at the antique booth just to salvage that one gear? Let me know in the comments below!
Timestamps 00:00 - Flea market find: $3 mystery clock 02:00 - Assessing the case, pot metal, and cord 04:00 - Testing hands, switches, and teardown strategy 06:00 - Model 710: Deciding to tear it down first 07:05 - Opening the housing and finding the red lamp 08:35 - Inspecting the movement and rusty internals 11:00 - Figuring out the animated mechanism 12:40 - Finding loose parts and the broken fishing line 17:25 - How the animated fishing rod and fish work 19:30 - Tracing the internal wiring and bad wire nuts 21:30 - Safe power test on the clock motor 22:40 - Motor teardown and gear inspection 24:15 - Preserving the flaking dial face 25:20 - Pulling the hands off the center shaft 26:02 - Disassembling the gear train 28:00 - Diagnosing why it won't spin 29:50 - Spotting another Huck Finn clock in the wild 31:35 - Repair fail verdict: Would you buy the donor?
Check out our Patreon page, for all of our channels. Contains outakes, concise arcade repair tips, bloopers, repair FAILS, Audio youtube wouldn't allow us to upload, and much more!
Ladies and gentlemen, welcome back to Amateur Repair Time.
Thank
We have a mystery clock today.
So I bought this at the flea market the other day for about $3.
you
It's actually been about three or four weeks ago,
but it's been sitting around.
for
I kind of like these weird figure clocks with the weird stuff going on.
your
And this one, I couldn't tell what it was even supposed to be.
And there's something missing.
time.
So I figured we'd look it up.
See if we can fix, obviously there's a pole or something missing.
See if we can figure out a way to fix it
or repair it or what it's even supposed to be.
And yeah, so I was at the flea market.
This was sitting on the table in the middle of a whole bunch of junk.
And I think I paid $3 for it.
So it's an electric clock.
It's a United self-starting.
Now these self-starting,
that was important because when the clocks first went electric,
Uh...
Some of them would not self-start.
So you'd have a problem where, well, there's all kinds of problems.
I don't have any problems.
In the 1930s, whenever they started with all of the electric clocks,
there was an issue where the power would go out kind of frequently.
They hadn't perfected it yet.
And so you would have this issue where in the middle of the night,
the power might go out and then come back on.
And I guess if it was self-starting, it would still screw you up.
The telechron clocks had a little dot on them that was red.
And so if that had changed,
that told you that the power had went out in the middle of the night.
Because you might wake up in the morning
and you've got to leave at 7.30 to go to work.
The power's been off for four hours, so it's really 11.30.
Yeah.
So I had a lot of issues.
Thank you.
So the self-starting was important, though, of course.
I don't know if that's supposed to be crooked like that.
I don't know. We need to figure this all out.
So, it's this kind of fake gold look, but it's this pot metal crap.
And it's got a, you know, a molded cord
as opposed to the ones that were separate,
you know, later or earlier.
So, I would say this is from the 50s.
That'd be my guess.
Just the kind of gaudy look and the way the cord is,
I would say from the 1950s.
All right.
But, so, it looks like...
There was supposed to be maybe a fishing pole or something.
I guess that's a boy with a hat on.
And I guess that's a fishing bag.
Put the fish in.
And there's a pole here that moves somehow, right?
But the top of it's broke off.
And then it would go down in here, I guess.
So maybe there was a pole that stuck up with a line going down.
And then there's something over here, but I can't tell what it is.
It almost looks like a bridge, maybe.
So he's fishing off the bridge, maybe.
And then I don't know what that is in there.
And then on the top, we've got this.
What the hell is this for?
I don't understand.
And it looks like it's broke.
So was there another piece
that came out to here that's broke off?
Look, folks, it was three bucks.
I didn't ask him questions.
The guy didn't know anyway.
He was a young guy.
He was talking after the sale, though.
You know about that?
So I told him I'd take it, and I started taking out my $3.
And then he started telling me how great it was.
You don't have to do that.
If somebody says they'll take it.
Shut up. You don't need to say any more.
You might talk yourself out of a cell.
Don't talk after the cell, people.
Yeah, I wonder what the hell is this?
I don't understand any of this.
I don't know what they're trying to do here.
And then here's the, you know, is that actually turning the hands?
So if I pull it, it does. Okay. I don't know how
you turn the alarm.
I think if it's a shin, you would
turn the alarm. So that's the time.
So it ain't right.
You know, obviously.
It looks like it's been heavily abused.
See the rust?
So we might have a nightmare behind here.
And the thing, we may never get it working.
I don't know.
I can't really fix a motor too easy, I don't think.
There's a switch here.
Okay, why do you need a switch for a clock?
You don't turn off clocks.
So there must be some kind of light or something, maybe?
I'm just saying this thing might be really cool.
Maybe the motor makes the fishing pole move or something.
I don't know.
But I like it.
The base is wood.
And, uh, it's...
I don't know, I guess it's animated, some kind of animated clock.
Now, United was famous for their carriage clocks, weren't they?
The one that has the horse, and there's a carriage behind it,
and the guy's cracking a whip or something.
I've actually got one of those in that room that was my dad's,
but I've never actually plugged it up.
But I think it does move, it's animated.
All right, so let's see what this says.
It says model number 710.
Well, that'll help us find it, won't it?
But before we do that, I'm going to take it apart.
Yeah, I can look, I can Google it.
But what's the fun in that if I've got
the thing right here in front of me?
I'm going to try to figure it out first,
and then we'll Google it to fill in whatever I can't figure out.
I've noticed on my pinball and arcade game repair videos
that that's a big disconnect between me and the audience.
They get all... I've had people tell me, why didn't you just Google it?
Well, what's the fun in that?
It's right here in front of me.
Now,
you have to Google it because it's not right there in front of you.
You can't do what you want to do with it.
But I can.
It's right here.
So all I got to do is take that off and take these off
and I can see what's going on inside
it and I ought to be able to figure it out.
And then whatever I can't figure out, then I'll Google it, right?
So I don't blame you for Googling it,
but don't criticize me and tell me that I should
come on people.
Come on now. Don't do me like that. Let me find a screwdriver.
Okay, I took the second screw loose,
but I haven't looked yet. I see it says RE.
I'm going to go with it saying replace with blah blah
blah because that little piece of red fell out.
So I'm going to guess that there's a red lamp in
there, like a red light bulb. I haven't looked yet though.
Yep, that's exactly what's going on.
So it's a red Christmas tree bulb, which
I think I've got some of those. Well,
Well, that one might be fun.
We can spray paint it.
so you just put a red lamp in there
and it's going to shine up through that.
i don't get what they're trying to do here but i
think we're in trouble because i don't there's
a lot of rust on it so i mean i can clean off
the rest of this but the movement looks like
it'll be all right this is probably gonna
be so rusted it won't work let me take this off
and we'll see okay so again i haven't looked
we might be all right we might have got lucky
i just did something like this not too long ago what
was the deal there was something
where this was stuck i think on mine this one's moving pretty freely
uh i wouldn't be surprised if this thing still works just fine
does it have
a second hand i mean obviously we can just plug it in but
oh well guess what that's the second hand
that's why i couldn't turn the
alarm hand it's not an alarm so i was wondering why when you pull it
i was thinking oh good turn the alarm now look
at the face look how screwed up
it is so i'm just going to spin the back of
this motor and see if it actually moves the
Yeah, I'm going backwards.
So if I go
the other way,
yeah, there it is.
Let me keep going and see if it goes one more.
I don't
know.
It's not looking great, folks.
Maybe we can figure it out, though.
Um...
Okay, so it looks like there's a red lamp
in there that illuminates this.
So maybe there was something painted back there or something.
Maybe, like, there was a fish hanging on his hook.
So I'm going to guess that there's a pole with some kind of line
and a fish hanging on it.
You hear the police outside?
And some kind of fish hanging.
And, um...
Let's see if we can figure out
if that thing's supposed to be straight or what.
Were we supposed to straighten it up, or was it supposed to be canted?
Like, we'll
figure
it out.
So there is some kind of mech here,
the gear or something on it,
and then there's something up here.
If
that
were
to...
That needs to move way over there,
though.
There would have to be...
What am I missing here?
Oh, the whole thing could be bent, couldn't it?
Maybe it's bent.
Let me move this.
Come on, now.
It's harder to do things with one hand, you know.
That's like a knurled thing.
I thought it was a gear, but it's not.
So to get it to look like fishing,
I think it would have to go way up in there.
Something would have to push it quite a bit, you would think.
So let's see if there's any kind
of mechanism that can actually do that.
Let's see if anything else.
Ooh, look.
Ooh!
That probably
goes in there
and just lit up.
And it was just like a lighted piece
of scenery underneath the bridge, as I'll call it.
I'm gonna guess that's what that is.
Do we have anything else?
We do have something else.
I don't know what it is though.
Oh, it might, oh, I think it might be the freaking,
it might
be the pole.
I messed it up.
Let me see if I can, that looks like a fish.
Is that a fish?
Let me see if I can get it out of there.
Okay, so there's something else in there,
but it's just wire nuts.
But to be honest, I'd kind of like to take all that apart,
make sure it's cleaned up and put some tape on those nuts.
But look what I got.
So,
I'm not going to bend it straight
because maybe it's supposed to be like that.
I don't know how it's supposed to look.
I don't know what attaches to what.
I don't know what was
supposed to happen here.
Okay, so let's look at the back of this.
There is something on the top there,
and that is right at 12.
So maybe that moves around.
Yeah, look, it's moving.
I did that earlier, and I thought it was going backwards.
So I need to go
the other way, but we'll
figure that all out.
Okay, so that moves around.
Which could be inside this,
like that, somehow,
which would make
the fish move inside there.
So it would look like there's a fish down under the creek,
and then this guy could just
have a fishing pole hanging over the creek,
so maybe we do still have something missing.
Yeah, so that's going to be my guess.
That is down here,
and it's making the fish go back and forth behind the little piece
of glass.
The little piece of glass has little reeds
and stuff painted on it and he goes back and forth.
And then this this guy's got a fishing pole
with a line maybe hung down in here where
he's trying to catch the fish
but the fish is just moving back and forth.
So I don't know if this moves.
I think it would have to go like this. I don't know how it could
do that. I guess if the fish was attached
to it maybe it could. Let's see if there's something else.
Yeah, so I don't see how
the the fishing rod can move.
I don't get that. Yeah, not sure.
Okay, so I'm going to take this off of its base
so we can look at the wiring, and then if the
wiring's all right, we'll plug it up
and see if this motor is going to run and if it'll actually
turn the second hand and the minute hand off.
Okay, I figured it out. So if that thing is
sticking straight up
and you've got this rod here that's attached to the fishing pole,
If this is in there like this,
with the fish down where you can see it,
and this is around that,
you have this little ear here sticking up
that would manipulate this rod as it moved back and forth,
and it would make
the fishing pole move.
That's how it's intended.
Now, whether or not we could ever get it to do that again,
remains to be seen.
I just found this inside of it,
which is probably hanging off
the end of his fishing pole.
We've got two fish.
What else have we got?
I've got a big mess, haven't I?
I don't think any of this is lead paint.
All right.
Well, it looks like what we're missing is part of his fishing pole.
A bunch of paint off of not only the light bulb,
but whatever that little piece of glass is,
which I think will fit right back in there.
This thing was just not taken care of, you know.
Okay, so the wiring power comes in,
connects to one of the red lines,
and then one of the blue lines.
So the red line goes over to the light bulb.
The blue line.
goes up to the clock motor okay the other one
comes in and connects to the blue line to the
clock motor so the clock motor is always powered
and then also to a black line comes to a switch
the other side of the switch black line runs
to a red line because of the light so the switch
will turn off the light but nothing can stop the the clock motor
and nothing can stop the animation
If we ever get it to work.
So this early into it,
I would say that our chances of getting it to work are about
30 percent. So first we need to see if we can get
the clock motor to turn. Okay, so I took the base
off, took the cord out of it, and then put it back together.
Here's why I wanted to do that.
This wire nut just fell apart when I was taking it off.
So if that plastic fell off,
then you have this in there. This was like wrapped around that.
But that would just short the anything and there could,
you know, cause some serious problems.
Okay, but now they're hanging out and all that's insulated,
nothing's cut or anything,
and there was still one more wire nut that's in there
because one more had to go to the switch.
So we're ready to plug it up and just see if the motor will turn.
So might get some serious problems here.
Here we go! Fortune favors the bold,
people. Don't see anything
crazy happening.
Is our second hand
turning? It is not.
So something is disengaged there,
but it still could be actually turning the minute hand.
Let's see.
I don't think anything's turning.
But since the motor is turning, it shouldn't be too big of a deal.
It's just disengaged from something.
So we're going to have to take that motor off the back
and see if there's a gear broke or something.
Something's jammed up.
Okay, I took the motor apart, and after doing that,
you can kind of tell what's going on.
So the shaft of the motor has a bunch of freaking
who knows all over it.
It, um...
turns this is what turns
this so that directly drives this okay
so as that spins that shaft
continues on the side
of it the worm gear
that directly drives the
second hand geared into the
minute hand and then
so all that to say we need to get this to mesh up very nicely with that
to turn this and the main problem
is everything's just freaking filthy i don't i don't think all
All of the teeth are gone on that.
I think it's just dirty.
I hope I'm right.
Are all those teeth gone?
That would suck.
I think they're still there.
They're just filled with dirt.
So let me take this plate off
and see if we can get some of that stuff out so we can clean
it all up.
Okay, so I've taken it out of its bezel.
Now the problem I've got is this face is just falling apart.
It's kind of hard to tell, but all of that paint is just flaking.
So that's done.
There's no way to save that except for one way.
So if I can get the hands off,
I can just put a heavy clear coat on this thing.
I mean where it's freaking several mils thick
and it'll kind of glue all that crap into place
and it'll stay exactly how it is.
If I touch it it's just gonna fall off and look like crap.
You could swap another face on it or whatever
but I don't really mind that look if it would
stay like that. So I'm going to very carefully try
to get the hands off. If I can get them off
I can clear the whole front.
And, uh, get all that basically to stick on there and stay like that.
Um, that's kind of what we do with back glasses on pinball machines.
If they're flaking, you just spray the crap out
of them with triple thick, which is like
a pottery glaze.
I don't have any of that here,
but I can use just regular spray paint, a clear coat and
soak it up.
If, uh, if I can get those hands on.
So luckily I've got this little set of hand pullers.
You, you basically move this up until these go in,
then you slide them under the hand
and then you tighten them back up.
And it moves it under the hand.
And then you push, you tighten this down
and it pushes down on the center shaft
and will pull the hands right off.
So I was able to do that.
So a little damaged, but I think it'll look pretty good.
If we can leave it like that, I think it'll be fine.
So I'm gonna take the stuff off the back very carefully.
Then we'll take this and like I said,
clear coat the crap out of it.
All right, I've got that in the paint booth,
but we got a big problem.
The center shaft that the hands mount on
There's a fiber gear on the back
and it's destroyed.
Half the teeth are missing. Not good.
I may have done that trying to get the hands off.
I don't know. But yeah, that's not good. So we're
going to have to figure out if somebody's replaced
this or if we've got one we can steal one off of
or I wonder if
that only drives
the second hand.
This is up against
the clock
and that is what
meshes with.
No, that drives the whole thing.
That's what's meshing with that gear. No.
Nope.
Hmm.
Well, what does that do?
No, that
is what
meshes
with it.
I thought we were going
to get lucky
in that smaller brass gear.
I don't know what it does.
I took one of the gears off.
That's right.
I got this one off.
Not good, folks.
Yep, that's what interacts with it.
Damn.
I thought that was fine before,
but I didn't see all the way down in there.
But I could have done that screwing around with the second hand.
If I would have forced that second hand,
it could have ate some of the teeth off.
Okay, let me see what I can figure out.
I've got, I might have one of these as a part. I might have
one of these out of a clock.
Let me look around and see what I got.
You did it with the Pyrex
refrigerator bowls. Like here's this one
and then the one that goes with the sets over in this booth.
It's just nuts. So that's really cool.
And then look at this, Donnie. See that clock? That's a
The fishing clock, believe it or not,
I have that exact same clock at home.
That's broken. I broke the thing.
There's a gear in it that I stripped out.
Remember I bought it at the flea market?
It looked like that and it was gold.
Yeah, $25. You can fix it.
Yeah, but that one's probably fixed. Does it say it works?
United Clock Huck Finn Cast Clock. So we need to look in here.
We've got to pull that out, Donnie.
I'm not going to buy it, but I have another video that I was making
where I was trying to fix it,
and I was trying to figure out what the thing's supposed to do.
So if we pull that out, maybe we can plug it in somewhere,
and then we can tell what it's supposed to do.
What do you think?
Okay.
All right, folks, so this one is missing the base,
and it's missing the fishing stuff.
Someone has put, like, a little, like,
just a fiber optic-looking thing in there,
so it's missing the fish.
So I can't really tell what's missing from ours.
I could buy this and have the clock that may work for $25,
but I don't really, I mean,
that's a lot of money to spend on it
and it won't be worth that much when it's done.
Now this top piece is broken on ours.
You know, half of this is missing,
but this is what it's supposed to look like.
So until I get the rest of the piece for the clock,
which is inside here, until I get that
part of the gear, I'm not going to be able
to finish fixing this thing, unfortunately.
So, it's a repair fail for me,
but at least I found another one, and now I know that there
are painted ones as well,
and they're saying that it's Huck Finn, United Clock Huck Finn
Cast Clock, which, that makes sense.
It doesn't mention Huck Finn on here,
but I guess that makes sense to me.
So, but, that's what we got, so I hope you enjoyed the video.
Leave your comments below, would you have paid the $25?
for this just to get that one little gear out of this clock
or what do you think i guess i could
always come back i can't plug it in because the cord is cut
so there's no guarantee that
the whole clock works um so i think we're going to let it sit for now
and the hunt will continue
donnie i got a knife
no no you can't all right guys we'll see you next time