Grandfather Clock Pendulum Stops After A Few Minutes

Antique Adventures
14 followers
#Vintagewatch #AntiqueClock #HistoryDesign #VintageClock
Grandfather Clock pendulum stops after a few minutes
AI Generated·May contain errors
Video Summary
AI GeneratedThe speaker demonstrates how to level and calibrate a grandfather clock to ensure it runs consistently. By experimenting with shims under the clock's legs and adjusting the hammer distance for the chime, the speaker shows how to extend the clock's run time and optimize its sound.
I'm going to show you how I do it.
This is the grandfather clock I picked up from the ocean.
I've got glasses on it.
I'm going to sort out the glass.
That's how I do it, sort the pendulum.
I set it all past cold to 1.00 on the air.
I set the pendulum in motion and let it run.
When it stops, it stops after 15 minutes.
I've placed something underneath the leg for now, so I can see how far it extends.
It stops after 15 minutes.
Then you put something else underneath the leg.
If it goes down, then you know you're going the wrong way.
Then you might have to go to the other side.
Right now, we'll see how far it goes before it stops.
As you can see, the clock has been running for about 14 minutes and then stopped.
What should I do then?
You can see the pendulum is still rising.
I've removed a piece of cardboard from underneath the leg.
I've moved one out of the way.
We'll see how long it runs for now.
The first time, we went for 14 minutes.
We'll see how long it lasts for now.
I'll get back to you.
I have a quick update.
I had to pause the video because someone had come to the door.
You can see it has been running for about 17 minutes now.
I've taken the stuff out from the right-hand side.
I've placed some paper under the right-side leg.
I've taken it out now.
It's basically sitting on the floor at the moment.
There is nothing underneath the leg at the moment.
You can see it's running longer now.
We'll see how it goes.
I'll come back and check in, say, 15 minutes, and see how long it lasts.
Once you get closer to the right track, you might need to place a small piece of paper underneath.
Or on the other hand.
You keep experimenting.
I'll come back and take a look to see what it's like.
A quick update.
It has been running for 43 minutes now.
I've done the right-hand side now.
I'm just going to put a small piece underneath the left side of the clock.
We'll see how long it lasts now.
This just gives you an idea of how the clock works.
Sometimes it can take you weeks to get a clock running perfectly.
Sometimes 10 minutes.
Sometimes half an hour.
It's just down now.
Another tip is, I'll show you the donger going off.
I'll show you the donger.
Wait a moment.
I'll show you the donger going off now.
If you've got the donger right, when it does the final donger, you'll notice it keeps ringing for a moment.
What you probably want to do, I'll show you.
You see the donger here.
You see the donger there, don't you?
You want the hammer positioned just about 2 or 3 mm away from the bell.
You don't want it sitting on the bell.
Just a few millimeters away from the bell.
So the gong and the bell keep on ringing.
If it's right on the bell, then it will ring.
So hopefully that will set your clock.
I hope this video helps you.
I'll be putting some more clocks on later on.
I've got some nice clocks to put up.
Thank you for watching. Subscribe to the channel.
Thank you.
