The Damage To This 1927 Junghans Grandfather Clock Is Horrible!

Amateur Repair Time
257 followers
1.2K Video Views·Jul 27, 2025
Check out our Patreon page, for all of our channels. Contains outakes, concise arcade repair tips, bloopers, repair FAILS, Audio youtube wouldn't allow us to upload, and much more!
https://patreon.com/JoesClassicVideoGames
------------------------------------------------------------------------------------
Ladies and gentlemen, welcome back to
Amateur Repair Time. I've got this here
at our shop. I've just picked up this
clock. It's about 100 years old, I
think. Um, we'll get the name of it here
in a minute, but I bought this at an
auction for $26 because the glasses
broke on the front and was scaring the
crap out of people. So, we're going to
address that. See if we can fix the
glass and then end up with a nice old
grandfather clock. I've got several of
these, but I don't have any old ones
like this. So, um, it has a almost like
a stained glass front on it and it's
beveled glass.
There's a piece broken here and a piece
broken there. Obviously, this one
doesn't appear to be beveled. So, it
looks like they broke it twice. U, but
this thing's all bent up, this frame,
and it's kind of just hanging in there.
It was all I could do to get it here.
So, Joey and I are going to pop it
loose. The wood on the back that holds
it in place. If I can get that little
trim piece off, uh, we can take this
whole window out.
And uh we won't have to worry about it
falling and breaking into a middle piece
in a mill million pieces. It would be a
damn shame to break that big nice piece
in the middle. Okay. So uh we're going
to carefully pry that out and see if I
can slide that out of there. All right.
So
that whole piece of glass was trying to
come out of there.
We very carefully got it inside.
Um this is the
Which way does it go? This is the top.
So, this is the left side. That's the
right side. So, we're upside down. Let's
spin around. So, we're right side up.
Notice how I go slow. I'm not trying to
make anybody dizzy. Yep. That's how it
was in the in the cabinet. So, it's very
fragile. Um, but I believe we can just
kind of fix the bad solder in places and
get it where it's nice and strong. An
interesting thing about it is um it
appears that once a couple pieces of
glass break, it kind of weakens the the
structural integrity of the piece of
glass, the whole thing, you know. Um but
there's also a couple broken welds. So,
I think what I'm going to do is remove
the two broken pieces of glass and tack
solder the the uh two broken spots back
together. That should really uh
strengthen the whole thing up. That
middle piece has bent slightly where
it's come out. So, I need to address
that, too. But, um,
yeah, I think we can fix it up. I think
so. I think I'll take the two pieces of
glass out and then fix the solder joints
because my whole worry is I don't want
any more of it to break apart. Um, so
that's that. And then here is the
movement. The reason I didn't say the
name earlier is because I don't know how
to pronounce it.
I think it's about a hundred years old
or so,
which, you know, doesn't necessarily
mean much. They're probably most of them
are that old. So, here is the makaker
mark.
Jungans. Jun Jungans.
Hengins. I think the J is probably
silent.
We'll look at this again later on. I
just I know you're I know you're very
anxious to know.
And I'm very I'm very uh thrilled.
By the way, the suspension springs
broke. That's why it's that's one of the
problems. Um I know you're very thrilled
to see this or I was very thrilled to
see this. Um, it has five hammers, which
means it's going to play the Westminster
Chimes or something to that effect. Uh,
maybe it'll play something even better.
It kind of looks like Yeah, look,
there's two different lines on them. So,
two of them are back here and then these
three are separate. So, it's going to,
I would assume, chime and play a melody.
So, I was hoping there would be a melody
um and not just a chime.
Um, so I was, you know, if there's just
a chime, usually there's just one hammer
or two hammers or something like that.
But since there's five, that's so that
it can play different notes. So it must
have some kind of melody ability, which,
uh, I really enjoy on the one that I've
got at my house right now.
So, uh, this, of course, just slides
right out. No big deal. Um, when I saw
the pictures of it in the auction, it
only had two weights and two chains, so
I thought that it was probably just a
strike only. But um I'm not familiar
with uh this brand at all, of course.
And um
uh it appears that I was wrong about
that. I'll tell you another thing.
I don't see any wear at all. I mean,
there might be some bushings that have
wear, but these are some big old heavy
very well-made gearing on this thing.
Um
pretty
I haven't messed with these Swiss clocks
at all.
So, that is hanging down there probably
because when you pull it up, it fixes
this the the um strike. So, this hangs
down and then when you're looking at the
movement, let's say it's striking 3 p.m.
when it's 4 p.m. You pull that one time
and it'll go ahead and strike 4 pm. And
then when it gets around to five, it'll
be correct. Um I think
All right. So, I'm going to leave that
out. Is we're just asking for it in this
um case. So, let me show you the case
now. That might be the best part.
So, there are no markings on the back at
all. Well, there are, but I can't tell
what they mean. But, it's in very nice
shape in my opinion. Very solid.
I saw one online that was similar that
appeared to
uh they believed it was from 1930 or so.
So
that says 24.
I don't know if that means 1924.
I don't know if that means that's 24 in
wide.
So I just don't know.
Um I love this older stuff.
Look at this little trim piece they've
made. So, it's got a little bevel
and then it gets up here
and they took the trouble to bevel it
even in further because it was going to
meet this smaller piece
that's curved.
All right. So, just above this, whatever
this is, that almost seems like that's
some kind of hook to hold it on the
wall.
There is a 14
So again, I don't know what that means.
Joey was saying it looked as if there
was something in here.
But this almost looks added. I don't
know.
And there may have been some kind of tag
there at some point,
but it's long gone, baby. So look at the
shape that it's in, though. It's a very
nice shape.
considering what it is. Now, I know it's
not like fine furniture shape, but to
me, this is very fine furniture. Um, it
has two hooks. I thought it only had
one. This was the only one that was
latched at the show or at the auction.
And I got to tell you,
it's got that smell. Not the bad one,
the good one. If you if you uh if you
have anything that's like old wood, old
wood has like a smell to it.
Yeah, it kind of stinks, but not really.
Once you realize what it is, you kind of
like it. So, here is the pendulum.
Um I'm just going to leave it like that.
I don't believe it goes like that, but
they may have done that
to um shorten the length of it, which I
know you're supposed to do with the bob,
but
that sure looks wrong, but we're going
to leave it like that for now.
Uh there's no hole in the bottom of it,
so that's good. Right. If you if you
haven't messed with these much, I I'm
watching for glass.
If you haven't messed with these much,
they um
they often will have this bottom board
broke out. Now, this one's pretty hefty,
so you probably had to hit it pretty
good. But what'll happen is the um the
weights will break, the chain will break
or something breaks, and the weight will
fall and it those things are so heavy
it'll fall and break the board on the
bottom. Um
here's the shelf. Obviously,
now it had two little
thumb nuts in a bag with it. I don't I
have no clue what those go to, but we'll
figure it all out. Here is their chime
rods.
Two of them are touching right now, so
that's probably happened when it got
damaged.
Let me see if I can get one to move a
little bit.
Yep, easy enough.
All right. Have I got something laying
here I can hit it with? Why I do
I have a screwdriver?
[Music]
Oh, I see what's going on. Look, there's
only three different ones.
[Music]
So, that's probably going to be the hour
strike. And then there's
those are the same. And then there's
these
[Music]
probably something like that. So, can it
do Westminster with three chimes? I
think it can. I think I just did, didn't
I? All right. Now, I can't tell what
this is. What does this say?
[Music]
Slag work steel.
And there's a hook
that's upside down.
Schlag work steel. Let me see if that
means anything. All right. So, that
little thing is where the key hangs. And
it's just a name that they had on it. It
may translate to something. Someone
could probably clue me in on that. I
know we have a lot of uh German
and
Swedish
viewers on our channels.
Um, okay. So, now I'm being told that
that's a date code on the bottom. Let me
I got to zoom in. I'm trying to do all
this with uh only two hands. Sometimes
you need four or five.
This will help everybody else out, too.
All right, so 2712 is almost certainly
December of 1927,
which makes complete sense.
The earlier ones would have like a
10 or something like that, which would
mean the first half of 1910. But by this
time, they were making so many damn
clocks that they needed a more
complicated. They wanted to actually
break it down to the month. They said
they were making 15,000 clocks a day. I
didn't say 1,500.
15,000
a day. Now, that's all clocks. That's
not grandfather clocks. That's like
everything.
Okay. So, I don't want to keep moving
that around like that. But there you go.
Let me see if I can do anything to save
this. Okay, so just for orientation,
um this is
the inside. That's the bottom. That's
the top.
So this is the inside. So this is the
left side. That's the right side. But
we're looking at the back. I've never
really dealt with
this. This is basically like how they do
stained glass.
But you know what? I can solder. Sure
looks like regular solder to me. So, I'm
just looking at all of the joints
so we can strengthen this up. I found a
few that were obviously screwed up.
Look at that. We're again, we're on the
back, so this is all flat, but you can
see the beautiful bevel on the glass.
Okay, so this joint has broken loose.
Now, we're on the carpet here, so if I'm
very careful and don't get cut, I should
be able to move this around
um and then use solder to join this back
together to strengthen it back up where
the whole thing can be moved.
This one's broken.
That one's intact. This whole piece
isn't in the channel. This this metal
piece actually has a channel that the
glass goes in and the whole thing can
move. So I need to kind of bend it back
into place
so it holds the glass and then tack it
back together.
Actually just did. So that's back in
place.
Okay.
All right. Now, if you look,
see the bevel and the bevel. This one
doesn't have a bevel. So, this one has
been broken twice.
I can actually cut clear glass. So, I
can make a piece that can go in there,
but that bevel not quite as easy. I'm
sure it can be done. I'll figure it out,
but we may end up for the time being
just cutting regular glass for it.
But for the very, very time being, we're
not going to put any glass in it. I'm
just trying to get it to the house
without breaking it. Um, also, is it
that side?
Oh, it's right here.
This flange
is what holds it in the cabinet. And
it's bent up real bad right here.
You can see it. See? It bends in real
bad. So, what happened was they were
transporting it or something. They may
have even tilted it forward.
Um, and the the weight on on this
particular clock is very heavy. That
they're they're real nice and ornate
looking. The thing probably weighs
15 lbs. Something something like that.
And surely that's probably what did it
right.
Okay. So, uh yeah, let me very carefully
without the camera on see if I can slide
that piece of glass and that piece of
glass out. All right, folks. I got it in
the back room. I was able to take that
one piece out and take the other piece
out. I had to take the corner loose to
get that one piece out. Um, and then it
just solders together and
it's all glazed. So, there is like a
glazing putty that they put around the
glass that's old and dried, probably
original. Um, but that is actually metal
that you're seeing there. You can see
how they constructed the channels. So,
what I did on the other end where that
piece is missing after I soldered it
back together, I just filled this
channel, a lot of that up with solder.
And it just really strengthened that up.
It made that joint really strong where
it doesn't flex at all now. So, this
one's still got a little give to it. So,
I'm going to do the same thing here. And
that should strengthen the whole thing
up. Maybe even to the point we can mount
it back in the case.
All right. So, I was able to get it
mounted back in there. Now, when I
bought it, it was like half hanging out.
I don't know if you saw that in the
video earlier. I was kind of nervous
when we brought it in because I could
just see it all falling out. Um, it's
much more sturdy now.
So, it ain't going nowhere. Um, so I
know all this is ugly. We'll fix all
that later. Um, and I didn't do that.
That was someone else. That was when
they tried probably tried to fix it the
first
So, this thing is held in place by like
a little trim strip.
So, there's that flange all the way
around it, and it just barely fits in
there nice and snug. And then this
little trim strip fits just beside
that piece and on top of that
that flange. It's the same way they put
like houses in new construction, or they
used to with a with a flange on it. Um,
and then this bottom one I took off and
I took this side one off. That's how we
got it out. Um, so I laid it back up in
there and put those back and that
sturdied it up, too.
So,
yeah, that'll show it. It It still moves
a little bit,
but I mean, look at the glass at the
top.
Glass moves a little bit. It just needs
glazed. Uh, and it needs two pieces of
glass.
So, I think we're good to transport it
now. So, I'm going to take
Oh, Lord, it's scary. I'm going to take
this out. Don't need any problems there.
I'm going to keep the movement out. I've
got the weights already out. I'm going
to take the two pieces of glass with me.
And I'm going to lay this on its side. I
think that might be the best way to
transport it. I can't transport it
vertical. I guess I could.
H
I think land laying on the side would be
the same. And if I if I transport it
vertical and this falls out or anything,
um
it's going to fall farther.
But if I lay it on its side,
it should hang in there just fine
till I get it home. Now I'm taking it
home because I can do all the repairs
that I need to do on it at the house. So
I really wish that they wouldn't have
busted it, but
you know what they say, wish in one
hand. And well, you know what they say.
I don't have to say what they say. I
don't talk like that, folks. Okay, it's
a Look at that.
It tried to take it out.
It's beautiful old clock. Needs two
pieces of glass though. But I just feel
it's safer with the broken glass out of
there.
Well, folks, you'll be happy to know
made it to our uh you know, secret layer
with it in one piece. And so I am
measuring
to get replacement glass cut.
So I made a little pattern with the old
piece that's broken.
And I carefully measured everything. Now
this is going to be an incredible thing.
You're not even going to believe this.
If you're a longtime viewer of my
channel, you will not believe this. This
thing was made in Germany.
In Germany, they use metric
So, I have actually measured it in
metric. Now, you will probably never see
this again.
There is a 10 mm bevel all the way
around it. Now, I don't know. I think I
can get a bevel cut on it.
I know a special glass place I think can
knock that out. I don't know if they can
do 10 millimeter though. But that is
what it is. And it makes sense, doesn't
it? Nice square number like that
that it would be 10. So, it's a there's
a 10 mm bevel on it. I need two pieces
uh
with the bevel on opposite sides. I was
going to put mirrored, but then they
might put a mirror finish on it, make it
a mirror, right? But one piece needs to
be like this and one piece needs to be
like this,
right? So, the bevel on this side and
then the bevel on the other side on the
other piece.
Um,
it appears to be 3 mm thick
and it bevels down to one and a half
millimeters on the edge, which again
makes complete sense. Look at this
little gauge I've got here.
This is pretty cool. It's a old school
like watch makers tool.
Inches and meter.
What do you think? Pretty cool, huh?
And look where it was made.
It's made in Germany, right where the
clock was. So, I don't want to hear no
complaints.
Um, okay. So, we're going to take I'm
going to go to the uh glass place.
There's an old school glass place down
the road a little bit. Um, it's been
there since about 1990 and it's still
exactly like 1990 inside, which is cool,
right? I'll see if I can film a little
snippet in there. Um, but I'm going to
go see if they can make me a couple
pieces of glass without, you know,
charging me $400. That's the other good
thing about that place. Their prices are
like 1990. It's pretty cheap. I'm going
to go check them out. Well, folks,
unfortunately, cutting beveled glass
very hard to do. Um, they have to grind
that edge obviously and it you have to
have special equipment. It's very
expensive. I got a quote and it was a it
was nuts.
Um,
so we're just going to use regular
glass. So, I'm cutting some pieces. Of
course, since it's a strange shape, it's
hard to get that cut, too. But you can
actually get glass very inexpensively at
the hardware store. So I went ahead and
picked up just a like a 8x10 or 8 by11
sheet of glass and I'm cutting the two
pieces we need out of just regular plate
glass. All right. So I got a the next
part of the project going on. So I put
the uh two new pieces at the bottom
because I'm thinking in my head uh you
know they're flat so they're the wrong
piece. You can't tell too much, but I'm
thinking in my head when somebody takes
a glance at it, they're going to see the
beautiful face up top. They're going to
see the uh, you know, the beautiful
glass and the beveled glass and
everything. And then there's going to be
a pendulum swinging back and forth. And
you're going to see the weights hanging
there. Your eyes aren't really going to
go to the bottom that much. So, I hid
the two pieces of slightly different
glass at the bottom. Hopefully, you
won't even be able to see.
Okay. So, uh, like I showed before, all
of this, all of these, uh, panes are
slightly loose and all of that. And it's
cuz it needs to be glazed. It had some
glaze in it, some old glaze. I left that
that the best way to do it would be to
take it all apart and remove it all,
but, you know, I don't really have that
skill. So, I'm using just straight up
window glazing. Um, getting it in the
the edge with a putty knife. I've got
this clamp lightly on it just because it
this can this actually moves a little
bit cuz it's not mounted in this frame.
Um I guess one way you could do it would
be to mount it in the door, take the
door off, lay it on the table, do the
glazing, then turn it over, blah blah
blah, but it's not completely flush like
this. I can get it completely flat. So I
just think it'll work better. So, I'm
I'm taking a putty knife, squeezing the
glaze on, taking a putty knife, putting
it in, you know, the uh the lid or
whatever, and then um cutting the excess
off with the putty knife. I'm not
leaving a bevel or anything cuz it
doesn't need to be waterproof or
anything. We just there just needs to be
something in there that's actually
holding the glass in place. So, that's
what I'm doing now.
So, I'm going to very carefully go
through and this is the back side of it.
So, I'm going to very carefully go
through and get it all glazed and then
let it dry for a couple days and then
I'll flip it over and do the front. Now,
uh when it's all done, I'll take a like
a a Sharpie or something. This thing's
like gold brown looking, you know? I'll
take a Sharpie or something and color
the glaze so that it's not white so that
you don't see it as easily. But that's
my plan. Stan.
All right, folks. So, I let it dry for
about 2 days, and it is incredibly
sturdy now. So, that was what it needed.
Um, I don't know how I can illustrate to
you, but it's all it's all one big piece
now. And it's nice and solid. It doesn't
even flex. Um, I don't know
that I need
the glazing on the other side.
Basically, I stuffed it in there so it
pushed the glass into the front, you
know, the the front of the lead frame.
Um, so I think I need to clean it up.
Maybe, like I said, put a like maybe a
Sharpie or something on the the white so
that it hides it a little bit and then
mount it back in the door and we'll see
what we've got.
Well, next time we're going to have to
work on that part.
But we have fixed the door. The door is
fixed.
I didn't do any paint on the the leaded
part yet. It actually, you know, from a
distance it looks kind of cool because
it looks kind of old. But it would look
better if it was uh all if that white
wasn't there. Like if it was
the way you're supposed to do it is when
you mix that um
uh what do you call it? The glazing.
You're supposed to mix color in with it
so that it looks old.
But hey, ain't nobody got time for that.
I didn't have the the proper stuff. I
just, you know, I was in a situation
where I really needed to save that
before I broke that. The real problem
would be that big middle piece of glass
that's beveled. That would suck if you
broke that. Now, do you want to see the
best part? I'm going to do it.
[Music]
You could slap that now and it wouldn't
come apart.
Right.
And you can see the bevel.
So the bevel's on the top.
The bottom two pieces are not beveled.
It's kind of hidden. Little hard to see
because it's way down there, especially
for all us tall people.
Look how beautiful.
All right. So, I think we saved the
case. I'm happy with that.
Okay.
Um,
next time
we'll work on the movement. I don't
think it'll be a problem. We'll do
whatever it takes. Oh, I I put a u if
you at the beginning of the video, you
may have saw there was trim on three
pieces on the inside. there wasn't a
piece on the top. I was able to put a
piece of trim on the top inside to hold
it in place. And I guess I should
mention that I have this other one right
here beside it.
This is a an Americanmade uh wood
movement clock from about $1,800 that I
bought for $7.
Yeah, they're getting cheaper. I can't
remember what I paid for this one. This
video is taking a couple weeks.
Uh, so I don't remember what I paid for
that one, but it wasn't much. And then
the same auction company ended up having
this one
for $7. And it's a it's a it's an
Americanmade
uh tall case clock from about 1800. And
it's made out of wood largely. I mean,
the hands are metal and there's a few
little pins that are metal, but almost
everything in it wood. The gears are
wood. It's a woodworks clock. Because in
1776,
we started a bunch of stuff off and uh
we were getting all of our or most of
our processed metal
from England and then England cut us off
for some reason about 1776. So the clock
makers in America could no longer use
very much metal in their clocks. So they
made them all out of wood, even the
gears. So, that one will be an
interesting video, but we're going to do
this one first. I like doing them in
order. So, this one's just going to have
to wait. And it understands that it's
going to have to wait. Um, but we'll see
what we can do with this nice German one
here. This is just a beautiful freaking
clock. It's I I can't wait to see the
thing run. I think it's going to be just
fantastic.
Um, and I think I'm going to keep it.
Um, I'm going to keep both of them. The
wood one's listening, so we got to act
like we're going to keep it, too. I'm
going to keep both of them. But, um,
definitely I I have a spot picked out
where I'm going to keep that one. The
only thing is it doesn't, you know, I
was about to say it doesn't chime, but
yeah, it does because it's got four or
five tone bars in it, so it must. Okay,
we'll figure it all out. That's the next
video, right? We're going to be working
on the movement in the next video. And
it may be as as easy as just oil it and
hang it up. But if the thing's dirty,
I'm gonna go ahead and disassemble it
and clean it all up. Put bushings in it
if we need to order whatever it needs.
And then uh we'll see if we can get her
going again. It's a shame they broke
that glass, but I was able to take the
the extra beveled piece out of the
bottom. This piece actually fit right
there, you know, and then put the two
flat pieces down there. They're the
exact same thickness on the edges.
Uh which what did I say? It was 1.5 mm,
something like that. It's about that
thickness on the edge. So, if you if you
held it up next to the beveled piece, it
was about the same thickness on the
edge, almost identical. So, it fit in
just perfect. It just doesn't have that
little beveled p accent. But, I honestly
think most people wouldn't even be able
to tell. They wouldn't even notice it.
They wouldn't even think about it.
Nobody That's a thing that I run into
working on the pinball machines and
stuff, too. Nobody looks at at your
clock and then goes, "Huh,
wonder if all the pieces of beveled
glass are actually beveled glass."
Collectors might, but most people are
going to look at it at it and see the
pendulum swinging, hearing it tick-
tock, and go, "Wow, what a cool
grandfather clock." And then you go,
"Yeah, that's a German one. It's made in
about 1930." They're going to be like,
"Holy crap, this is this is awesome.
What a beautiful clock."
They're not going to go, "Oh, the top
the two bottom pieces of glass aren't
beveled. They're just flat." I would
have got the beveled glass, but it was
something like for those two little
pieces, and those aren't very big. It
was something like $280 or something
like that. They quoted me, and it just I
just can't bring myself to do that,
especially when I knew in my head I
could get it to look like this, right?
So, I'm very happy with it. Um, only
thing is the I wish the uh the glazing
uh was uh color darker, but you know,
it's pretty even looking and you know,
it look it does look old like that. So,
I'm not that worried about it. And we
may be able to do something with it
later to clean it up, make it look a
little darker. You could always just
paint around the very edge of the glass.
Um, just, you know, just paint the the
the leaded part. But, you know, again,
I'm nitpicking that. Most people
wouldn't even think about it. All right,
folks. I hope you enjoyed it. Leave your
comments down below. Let me know what
you think. Which one would you keep if
you were going to keep one?
Woodworks clock or this one?
What do you think?
I've got
I have four other ones. Look, if they're
cheap, I got to get them. I'm saving
them. All right, so I got six to pick
from. Don't worry about it. All right,
so I'll see you next week. Leave your
comments down below.
