Replacing A Crystal Cartridge With A Piezo Element General Electric Record Player Repair

Amateur Repair Time
257 followers
230 Video Views·Oct 4, 2026
Check out our Patreon page, for all of our channels. Contains outakes, concise arcade repair tips, bloopers, repair FAILS, Audio youtube wouldn't allow us to upload, and much more!
https://patreon.com/JoesClassicVideoGames
------------------------------------------------------------------------------------
Ladies and gentlemen, welcome back to Amateur Repair Time. We haven't worked on a record player
in a while, so I thought to break up the monotony, I would record a video on some record players.
I have been working through a television set, but it takes weeks and weeks and weeks and weeks of
videos to do that, so I'm trying to record some different stuff in the interim. I don't know if
this will come out in the middle of those or after those or what, but we're going to mess with some
record players. The first one is this General Electric Automatic. I was at a thrift store,
like an antique mall, a couple weeks ago, maybe one week ago, and they had this on clearance.
It was 75% off. I don't know if it still got the tag on it, but anyway, it ended up being like $12
or something like that, and I kind of liked it. It's my type of thing. I'm probably not going to
keep it though. I'm probably going to fix it and make this video of it. I enjoy fixing them and
making the video. I've got plenty of record players, and then I'm probably going to sell it.
Now, I have a video game store in downtown Rock Hill, South Carolina, and in the store, we have an
area in the middle of the store with just a bunch of different stuff, because people come in and
they trade us stuff all the time. So, we'll get video games of all types. We do all the vintage
video games, and we work on arcade games and pinball machines and jukeboxes, but we end up with
all this different stuff, you know. So, maybe it's a bag that the video games were in, but it's not
really a video game bag. It's just a nice leather bag. We've got one of those right now, so it's
laying on the floor in this area. Maybe it's somebody traded in some stuff, and they had like a vintage
little table game, a little board game. So, we priced it and put that in the floor,
and then I've got a guitar amp, and it's in the floor for sale, and blah, blah, blah, blah. Well, we had a
record player. We sell records, too, but we only sell just the old cheapo ones that are a
dollar or two. We don't really sell the ones that are worth anything, right? So, we've got a whole
bunch of records, and the college kids down the street like coming in, and they buy a couple
records, and a lot of times, they're not even going to play them. They're just going to look at them,
but we had a record player in there for sale last week that somebody traded in, and it was
one of these newer ones that they had never even used. So, the thing was still brand new,
and we sold it the other day, I think for $35. So, if I repair this record player, we'll take it to
the store and set it up down there so that they can have something to listen to the records on,
and we'll sell this one to somebody. So, let's check it out a little bit.
It's a big kind of heavy one, and I like the ones like this that have the internal speaker
where they're amplified. A lot of them are made... Oh, there's the receipt.
What did I pay for this sucker? It was $50, but it was 75% off, so they took $37.50 off.
So, it was $12.50. That's pretty good. You can see now why I bought it. It had this with it.
I have no clue what in the world that would have been for, but I don't believe it belongs in this
record player. I don't know what that would have been for, but it inadvertently made its way in
there, and then there's a couple stickers. It says General Electric Automatic, and it says
General Electric Audio Products Department, Decatur, Illinois, 105 to 120 volts AC, 60 hertz,
30 watts, and then it says its model number... What in the world does that say? 5706?
Well, I guess we'll go by the... That's the serial number. Model number V638H. So, there you go.
Now, there was a tag on it. Guess what the tag said? It said, record player needs new needle.
It has a needle. I can fill the needle on it. Now, maybe it needs a new one,
but if this thing doesn't work, it's not going to be because it needs a new needle. It's going to
be because it's not amplifying the sound. That's what I think. It's got one of these cheapo jobs
here. So, one side says LPS, and the other side says LPS. So, it's a double-sided...
See the needle? It's a double-sided stylus that should play 3345 or 78.
You know, the 78 ones are usually supposed to be a little different, and there are a couple
records on it. It came with it, folks. We got these for free. So, we got Vanity Fair, Man Child,
and Hitchin' a Ride. That ain't bad. Did good there. And we got Chicago. Where do we go from
here? That was the single, wasn't it? Oh, no. 25 or 6 to 4. That's the single. You know, it says
that was written by Richard Lamb. I thought I heard that... Is it Richard or Robert Lamb? Mr. Lamb,
the guitarist. I thought I heard that Peter Cetera wrote that. Maybe I just thought that
because he's singing it. This is rippled up a little bit. Maybe it's... Oh, you know what it is?
It's just because it's slid out of its holes. If I put it back in where it goes,
it'll probably hold it down flat. Let me try that real quick. All right, I got it to flatten out a
little bit, but, you know, it's a little off. We might heat it up a little bit or something.
Okay, so we've got a power off and on and a reject, and we've got a 33, 45, and 78,
and then we've got a 7 inch, 10 inch, and 12 inch. I haven't seen where you manually have to
put that, but I guess it's a thing. Okay, so I'm gonna try plugging it in and see what happens.
If anything, that almost feels like I have to force it. Oh, there we go. I didn't have to force
it. All right, so let's give it a little volume here if we hear any amplification. Yeah, I do.
So sometimes you can hear like the speaker just, you know, making amplification noise. I think I
do. So here's all the way down, and then we'll turn it up. Yeah, I think there's something there.
All right, this has a little... something back there probably needs lubricated. It's a little...
it ain't tracking. Let's try it over a little more. Yeah, there's something catching it a
little bit. Okay, no amplification, and it's running too slow. Typical. Let's see if the
reject works at all. Actually, it does. Well, that's pretty cool, and it could tell there
wasn't anything on there. Okay, so yeah, we got two problems. One, it's not amplifying at all.
Three problems. I don't like that switch. Maybe it's just made like it. So I've got it all the
way turned up right now, and we got nothing. Dead, dead, and more dead. Okay, so we got to
get it where it amplifies. We got to get it where it's spinning at the right speed.
Probably an oil problem. That's two problems. Third problem, this has a little bit of resistance.
Once you move it a little bit, it loosens up, but it gets kind of sticky,
almost like they've sprayed WD-40 on it or something. So that's where we're at. Okay,
so I'm going to unplug it, and then I'm going to see if I can disassemble it. Looks like there
might be some screws here, and then we'll see what the amplifier looks like. Okay, so simply
four screws in the top of it, and you got to take the... well, I guess you didn't have to.
You don't have to take the knob off the front, and the thing lifts up. So I've got a couple
connections here, which are going to be the tone arm, and then I've got a connector here,
which is going to be the motor. So I'm going to remove those so I can safely pull this out,
and we can work on it. Okay, so if we want to mess with the amp first, this is it. So
same kind of thing. It's removable. It looks like there's a little tag on there that says,
Made in Ireland. That's cool. How is it attached? Oh, there's a plate here. So there's a couple
quarter inch screws here that hold it in. I'm going to unplug the... I have to unplug the
wiring now. So this is the power... well, I was going to say this is the power coming in,
but I don't know what this is. We got the two pink connections here. Well, you get the point.
Pink, pink, black to the tone arm, black to the speaker, brown to the tone arm,
and then white to the speaker is over here. So just got to make sure we put everything back
how it was. I always would advise people to take pictures, but personally, I'm filming a video.
So here's the little amp. You wouldn't think that the caps... there's only four caps. You
wouldn't think that the caps would go bad to the point that it just completely kills the audio.
I'll show you something interesting about this one though. If you look on the back,
look what they have done here with the silkscreen. So it says B1C2E3
base collector emitter. So they have marked the base collector and emitter on the four transistors
by just using the silkscreen like that. That is cool. All right, so I checked all of those
with my old meter and they all seem to be... none of them are shorted or anything.
So I think what I'm going to do is I'm going to go through and check these resistors
and then also check this pot and see if anything is wildly out of spec.
Let's see the the goo on the... around each one of the posts where it goes through the board.
That's interesting. Whatever that is. Could that be electrolyte... electrolytic
goo goo juice from one of the caps? I don't think so. That's the way it's pulled or the way it
looks. It looks like it's something that was done when it was manufactured, but whatever.
Okay, so I'll check all the resistors, see if they all seem within spec,
and then I'll check this potentiometer and see if it's in seems within spec. Oh,
and I'll check the the speaker and see what the resistance is on it. All right, so the resistors,
some of them had drifted, were a little bit higher, but none of them were crazy, so I left
them all. Nothing looked burned up or anything. They're just old carbon resistors, so they're
drifting up a little bit as time goes on. I've actually heard that the carbon ones can actually
drift down too because they get moisture in them, which makes them more conductive,
but all of these seemed high, a little bit high, and then the potentiometer worked too,
but it's a big one. It's like a five meg or something, which I guess is just the way this
is designed. It tested fine. I sprayed some contact cleaner in it to clean it up a little
bit. Hopefully the four transistors seemed all right to me, but I don't really know what I'm...
what measurements I need. I swapped the four caps. I got this little toy in. Now, I used this
in a video a couple weeks ago, and we had a customer or a viewer leave a comment on the
video saying, I sent you that two years ago, and you're just now using it. I'm sorry that I didn't
send you something more useful. I've actually got two of these. I had two people send me the exact
same thing at the exact same time, and I've got a third one that's more like a meter that does
capacitance too that we've used in some of our videos, but yeah, I've been using it a little bit.
I've got one at the shop and one here at the house, so anyway, let's check these caps.
I don't think that the caps could be bad enough for it to be doing what it's doing though, so this
thing... come on, do your thing. Well, maybe the cap's like crazy bad. This isn't working how I wanted
it to. Maybe you can see now why. There we go.
Can you see it? It's a 250 ohm. I gotta make sure I don't touch the metal,
and it's measuring like... jumping all over the place, but it's measuring like 320 or something.
I don't know. It's jumping all over the place, and there was a lot of like leaky leakage on the bottom
of the board. This one is measuring 204. It's a 150. I don't really consider all that out of line,
and none of them are measuring like real low ohms like they're shorted or anything.
Good old technology. This one, I saw a 188. Who knows if that's correct. You know, my main problem
with these, I gotta tell you, I hate to say it. I hate to say it, folks, but I'm gonna say it.
They're all just made in China. They're not as user intuitive as they should be.
They're, you know, they're kind of junky. It works. Kind of. Kind of. Kind of works.
116 ohm. 116 microfarad out of 100. So, really, like those don't test that bad to me, at least
according to this thing, and I have no reason to not trust it, but I swapped them anyway. Maybe
there's another thing that I'm not testing. What was the leakage like? I don't know what the
leakage would be. It might be leaky. If it's leaky, that could be causing a problem. Okay,
so I'm going to put it back in. Oh, and I checked the speaker. It's a beautiful 23 ohm speaker
of impedance, but I checked the resistance and it was 23 or 24. So, I would assume that's correct.
So, I'm going to plug it back in, and then let's see if that changes anything by simply
spraying cleaner in the potentiometer, removing and reinserting the plugs,
and changing the forecast. All right, let's see if that has changed anything.
Plugging it back up. That just, it feels like it won't break it, but I guess that's how it's
designed. I did not, you know, I'm not hearing any scratchiness or anything in the speaker, which
I went too far with it, which doesn't lead me to believe that it's any different, but we will see.
Let's see if I can get this knob back on. There's definitely a static that's going up. Can you hear
it? I can hear it. So, you can't hear it right here, but I'm going to turn it in about five
seconds and you'll hear something. I don't know. Whatever. So, I should just be able to
touch the needle or the pins. There we go. If I touch the pins on the pickup,
I'm getting static. It would be, it would be crazy if it actually is the needle.
But, we still have a ways to go to check things, and by the way, I didn't do anything to the
turntable, so it's still going to be too slow. What if I mess with this adjustment? So, that's
78. That's too slow. That's 45, and that's 33, they say. Yeah, we're getting nothing through
the pickup. So, either the pickup's completely dead or it's not making good contact with the
needle. Even if the needle's worn slap out, it should give you some kind of noise. Okay,
so I still didn't get anything. If I mess with the wires, I get a hum, so it's amplifying,
but this cartridge isn't. So, I took some Rubber Renew. That's some good stuff, by the way,
and I put it on the rubber thing here at the end, which basically, when this needle moves,
it moves the rubber, which, you know, you can see it moving around, which transports the sound down
to the other end of this where it's picked up, pickup, and then transmitted back to the amp.
Okay, so I checked the continuity between the red wire and the amp, and it's connected. Check
the continuity between the white wire, or the brown wire, well, it's white up here,
and the amp, and it's connected. So, all signs point to this cartridge is bad. I also checked
resistance between the two pins, and it's open. I don't think they're supposed to be open. I think
on any of them, you get a resistance between the two pins. Maybe we can confirm that in a minute,
and this is a Varco CN65 made in Japan. So, maybe we will do some research on this,
and figure out what would be a good substitute, or if there's any hope for this thing. So,
I'm going to pull out another one. I think I've got some pickups laying around. If I've got one
that I can hook up easy, we'll just hook it up, and see if it's amplified through that pickup,
which will confirm the issue, but I don't see how it could be anything else when I'm getting
amplification from the wires, and I'd also like to test another one to see if there's continuity
between the pins. Okay, there is a guy selling a replacement online, well, on eBay, a new old
stock one, CN65 Varco, and it's a crystal element, so that's probably the issue. I am getting
some resistance between the two pins. It's just really high, so it's like 600,000 ohms.
I tested another old one that I have. I don't know if it works or not, but I was getting something
similar with it, or even higher. So, apparently, I just wasn't testing it for high enough range.
So, I got to decide what I want to do here. It puts out 2.8 volts, so that means if I put a
more modern ceramic one in there, it's not going to put out 2.8 volts. So, is that little
amplifier going to be good enough to amplify it? I would think so. I mean, it had four transistors
in it, so obviously, they're moving the signal around, and, you know, and doing something with
it. So, will we get enough volume if we don't put a 2.8 volt cartridge back in it?
That's the problem you always run into, isn't it? Okay, so I looked it up, and it is a crystal
cartridge, which I broke it apart, and you can see that the crystal has disintegrated. That's
the reason that it's not working. So, basically, this moves. This rubber moves. It shakes the
crystal, which is connected to the outputs on the back, and that's how the pickup works.
And that crystal is capable of creating, like, 2.8 volts or something like that.
So, I fixed one of these before by replacing this with a piece of a piezo element,
which is a more modern thing that can be bought very cheaply, like a dollar.
And you just cut it, attach the stuff back, and put it back in the case, and that's that.
But it can't put out 2.8 volts, so it's going to put out more like half a volt or even less.
Which means that this is not going to be as loud, but we might as well try it.
I only did that one, so it'd be interesting to see if I can do more than the one.
And if we get it working, we can judge if it's loud enough or not.
And if not, you have a real problem because, essentially, you have to order another crystal
cartridge. And who's to say the other one doesn't look just like this? They're new old stock,
because they haven't made any in a long time, so they brag about them being new old stock.
But what they're saying is, this thing is old. Oh, it's really old. The crystal element in there
is really, really old. And we have no clue how it's been stored for the last 50 years.
It's that kind of thing. This is kind of an interesting one. Since this is a little bit
later player, I didn't think it had a ceramic cartridge in it, but it does, obviously.
Not ceramic, a crystal cartridge in it. This thing is from 73, I believe the little note said
there was a little sticker on the amplifier. So it's early 70s, and they were still making
crystal cartridges pretty well. Okay, so there's the mess of what was in it. It's the rivet,
what's left of the crystal, and we need to save these pieces. So we're going to attempt to cut
this thing down to where it will fit in there. So most of it's going to be gone. We're going to
leave the two wires, and just enough to fill up the rest of where the other thing was.
The end of it, so part of it is going to go through here, this rubber bushing,
and then the end of it is going to go into this rubber bushing,
which is what holds the needle. And if this works, it will be an absolute miracle.
An absolute miracle, people. I did one before and it worked. It's possible. You got to have faith,
people. How come you're already counting me out? Why are you already thinking it's not going to
work? What is it about you that thinks like that? Even if it doesn't work, at least I'm thinking it
might work. Come on, people, you got to be more... If I had your positivity behind me, it would
probably make it more likely to work. Okay, so I cut one down. I ruined one. Basically, the best
way to do it is with scissors. I tried using nippers and stuff. It just... This thing is so
fragile. The little piezo wafer is so fragile that it shatters if you bend this very much.
So you have to use something really sharp where you just cut right through it. So a pair of
scissors is probably the best. I ended up screwing up part of the end of it. We'll see if the thing
even works, but I think it will. Okay, so the way they had it was just how you see it there.
I've glued this on the end now. So it's just a rubber. And the rubber is actually pretty soft
still. I've glued this one on the end. It's going to stick down through and the needle is going to
basically move that as it goes through the grooves. As it does that, it's going to slightly
bend this wafer. The bending is going to send a signal through the line
and replace the crystal. So basically, you're replacing the element with this
piezo, whatever it's called, tweeter element. Okay, and in the middle they had a little piece
of rubber glued in there. It's just a little square block. And the reason for that is because
they want to make sure that that wafer doesn't bottom out on the cartridge. Because if it does,
it makes a bunch of noise. Now, I don't know why they didn't have one on the other side.
There's not one on the top. So I guess they don't think that it's going to do that, but whatever.
And then this little rubber part rides about right there. You can see where it was. You can
need to solder to these two pins. Two wires need to solder to the pins and then we need to rivet
or screw the whole thing back together. And we need to see if that works. So I'm going to let
this glue dry on this front piece and then we'll go from there. I didn't glue this one. I think
it's just going to ride in there. Wherever it needs to be is fine. But this front one, you kind
of do need to glue because if you don't, the whole thing could slide out of the rubber piece. It could
fall out of the cartridge. Okay. So there's what I came up with. Now, is this going to work?
I am positive it's going to work. You know why? One, I've done it before. And two,
I'm controlling the video editing. So if this doesn't work, you would have never even seen
this part of the video. All right. So I have to put this back on and then I have to kind of crimp.
I have to put a rivet to hold this in or like some kind of screw. So I've got to either find
a screw small enough to go through that hole or I need to drill that hole out a little bit.
But that's basically the sandwich that we're making. We've got the rubber piece at the end
that's going to hold the stylus or the stylus is going to react against. It's glued on.
This piece here is actually floating. And then we soldered to the two end pins and it's as simple
as that. And like I said, I've done this before and it worked. I don't know if it'll be loud
enough, but we'll see if it works. You heard that it basically had no amplification at all before.
So we'll see. So I mounted it back in. I used a screw to hold the case back together. Let's see
if we get anything. What do you think? This is the part where I delete this if it doesn't work.
Now remember, we haven't worked on the turntable, so it's too slow. I wonder if I turn it up to 78,
if it'll just get it closer to 45. That's working. It's not real loud, but it's working.
You hear that, right? So that's nothing. It does work. Okay. I wonder if we can make it louder
by modifying the amplifier. I wonder if there's a resistor we can turn in there to... I wonder
if there's a resistor in line with the signal that we could change the value of to pick it up
a little bit. Let me see if I can do some research on that. Okay. So the original one was 2.8 volts,
and I can't do the math. I don't know how to do this, but I'm just guessing here. The original
one was 2.8 volts output, and it comes into the board right here. Oh, do I have that right? No,
I got that wrong. It comes into the board right here, right there. Okay. So it goes around here.
This is nothing. This is a jumper. This is nothing. So the signal from the cartridge is
right here. This is also nothing. So it connects to one end of the pot. This pot is like a 2.5 meg
pot. Okay. If you turn it all the way up, the resistance from here to here is zero.
Okay. So you're basically shorting it out, and we're getting some volume with it shorted out.
Okay. So the signal is now through the pot to here, comes to here, and then jumps across to
here through a resistor. So the resistor is a 6.8, oh, I'm sorry, a 68K resistor.
So it's a 68K resistor. Do I have that right? I'm doing the little mnemonic in my head. Yes.
68K resistor. So I'm going to change that to a 10K resistor. If I go any lower than that,
I'm sure the resistor is doing less than just dropping the voltage coming in from the pickup.
There's something else going on there, right? So we have swapped a... Who in the world knows what
that little piezo tweeter is doing, right? We're going to change this from a 68 to a 10,
and then I'm just going to put it all right back together and see what we get from that. Now,
you could do it the other way too and look at where the speaker is connected.
So the speaker is connected right there, which, you know, you'd have to figure out where the
output of the... Yeah, I don't know. You'd have to figure out where the output of the amp comes from.
There is a cap here. It's tying over to here, and there is a cap there that ties over to here.
That goes back to here and through this resistor. So this may be the last resistor before the
speaker, and that's a 3300. Is that right? No, 33... It's a 3.3k, I think. I think that's right.
So you could play with that one too, maybe. So basically, I'm just trying to leave the
amp alone and either letting more of the signal through by lowering the resistor,
if that would even work, or letting more of the amplitude out by lowering the resistor going to
the speaker. But let's try this one first and see what that does for us. Okay, now I have no idea
if that's going to do anything for us, but we'll try. Why not learn? Now, I did flip the needle
over just because I liked how it was hanging a little better that way. Over here, since this
record's warped, it looked like it was going to touch the record. Okay, let's see. It definitely
increased it. It's still not loud enough, but it is better. It's like if it was 10% of what it
should be before, it's 20% now. All right, so now I'm going to try the one that goes to the speaker.
That's crazy as that is. I haven't fried anything yet, so that's good. So I'm going to swap the
resistor that appears to be leading to the speaker. Okay, so that last resistor that connects from the
speaker output, if you look, it connects back to the first base of the first transistor. That's
the amplifier. So there's four transistors in a row, right? And so it's amplifying, amplifying,
amplifying, amplifying it. So that one that connects back, I Googled that to try to figure
out what that is. And it's not a resistor because it doesn't come from the signal going to the
It's connected back to the, that speaker output comes directly off the fourth transistor.
But there is a resistor connecting back to the base of the first transistor, which is basically
the tone arm coming in, right? And so that is a, it's like a, it's some kind of
network that's designed to lower the volume of the output, whatever.
So if you, if you increase that resistor, it actually makes it louder. So I did, I,
it was 330 K and I put a 560 K in it and it did bump the volume up a little bit. So I would say
we're probably at like 40% of what the volume would have been with the original working,
with the original working pickup. So I'll turn it up and hopefully we don't get demonetized.
We don't have a good record being played. It's got all kinds of problems. Also,
it's got the same original needle. So, you know, it did work. It is playing the record,
but it doesn't sound all that great. About the same. Yeah. I'm not convinced this thing ever
sounded, you know, passable. Okay. So it still sounded really tinny. Now remember how small we
made that little piezo tweeter, right? So what I did was I took a 0.001 capacitor and I soldered
it across the two terminals inside where the end of the tone arm is and to give it a, hopefully
bring back a little bit of the base. And it did. So it sounds a lot better now. Obviously it doesn't
sound great. It doesn't sound like it's supposed to, but the thing had a bad crystal pickup.
I replaced it with a little piezo to cost a dollar, put a capacitor in it and
it sounds passable now. It is amplified.
Okay. So I've removed the platter. There was just a little C-clip
and I was able to remove from the top and pulled it straight up and off. One of these
washers was on the bottom of the platter and one of the washers was on the top of the platter.
So here's the idler wheel and you can see why we have speed problems. The grommets are completely
gone for the motor. The bushings and everything are completely gone. I guess that one is still
in there. I've got a bunch of these. They're all kind of the same, at least it seems like to me.
The motor bushings are usually the exact same. You could use like a pinball ring too if you had
some of them. I guess most people probably don't have them. I do because I work on pinball machines
all the time. But the little grommet that goes in there, if you look online, you can buy those
pretty inexpensively. They're very similar on all of the Roccola jukeboxes. You probably
don't work on jukeboxes either, but I do. The Roccola motor mounts are all very similar.
So it's probably, to me, it looks like that will work on this too. But basically any kind of
bushing that will hold this up. Now you can't use anything like washers because it'll transfer the
noise from the motor into the amplifier. But you can see this idler wheel basically,
let's see if when I turn the knob, does that move? Yes. Okay, so whenever we are on 33,
it wants to be on this top speed. But you can see that because this has dropped so far,
it's not even going to touch it. It's going to be over the top of it.
So the 33 is not even going to turn. But if this was up properly because of the bushings,
then we would be lined up on the part of the shaft that's the thinnest. And so when it's spun,
one revolution of this would be a shorter distance, which means it would turn this
a shorter distance, which means it would go slower. Okay, now if we go to 45,
which is that, same thing. With this up where it goes, it would put that idler wheel
on the second part of the shaft there that's a little thicker,
play it at a slightly different speed, which would be 45 RPM. And then finally, if we went to 78,
if we had this up where it's supposed to be, the idler wheel would be on the thicker part
of the shaft, something about like that. And it would play at 78 speed. So that's our problem.
And that's always the problem, pretty much. If you get speed problems, it's almost always there.
All right, so I'm going to oil everything. I'm going to look at the shop and see if I've got
some of those grommets, bring them home and see if I can slide them in here. Ironically,
that one looks like it's still at least partially fine. I don't know what happened. I guess they
just completely disintegrated into nothing. But yeah, so that's that. So that will fix the speed.
Let's look at the actual changer part underneath. I want to see what's up with this. Like why is
that allowing me to spin it around so much? Typically, it'll just go to like here. And then
when you get it to here, it'll fall down in position. But once it's falling down in position,
it'll still move around. That's not usually how they are. So something's probably screwed up.
Okay, so everything moves really freely on the changer. I don't think there's any problems.
I oiled everywhere that there was a pivot, but it's all working the best I can tell how it should.
That bracket that goes on the top is this, and there doesn't appear to be anything designed
into it to keep it from turning all the way around. So if you pull it up, whoa, there we go.
It can just free rotate. There's nothing to stop it from doing that. So they didn't design
anything into it to keep it from doing that. So therefore, there's not a problem. And then
it moves freely. And then when it's down, there's nothing to stop it from rotating either,
other than on the top, it could actually hit the tone arm. So it's not like you should be
moving that around anyway. You just move it out of the way, put the records on there,
and then move it back. So I believe the changer, everything's going to work fine on it.
I just don't see any issues everywhere. This is the piece that changes the speed by moving the
idler wheel up and down, and it's moving very freely. Everything's cool. So I don't see any
issues at all. I think we just need to get the motor mounted a little better, and we'll try out
our audio amp as we've modded it, and I think we'll run with that. Okay, so I brought home some
motor mounts. Like I said, these are the motor mounts for Rock-Ola Jukebox
motors, the same exact setup. It seems to be the exact same product that this would have
had originally. Now, one was still in there. It's like this gray color, and it's strange.
The cap nut, I'll call it, on that is a different size than these two. So I don't know why that is,
but that one is still fine. These two were completely missing, like they were never there,
and the pieces of them weren't inside the case, so I don't know what happened.
But I put two new ones on it, tightened it down, and that lifted it up where it needs to be. So now
we're on 78, 45, 33, 45, 78. Yeah, so everything's cool. So also on the idler wheel, I used some
Rubber Renew. This is really good stuff. It actually works. A lot of times, people suggest
things that you can't tell that it's any better than the other things. For whatever reason,
this works. If you put this on hard rubber, it makes it feel softer again, like it used to feel,
or you would assume that it used to feel. So I just put this on a paper towel,
rubbed it all over here, kept working it and working it, and now it's much softer than it was.
So I don't know. Whatever's in it, it works. This stuff is expensive though,
but you don't have to use very much. I've used maybe a tenth of a bottle and I've probably done
20 of these or something like that. I don't know. So it lasts forever, but it's worth its weight
in gold. Okay, so that's that. I'm going to oil this and put the platter back on it,
and then I'll put it back in the case and we'll see for sure that that's fixed our speed issue.
I'm trying to screw it up so it won't cancel us here.
Rubber Renew is good. I don't know what's playing. I can't tell what song's playing in
the background. We wouldn't want to get copyright struck, so it seems like it's all right. I mean,
we're getting some volume. Maybe if I put it on the wrong speed, it can't tell what it is.
So it's 33.
Kind of works at that speed too, right?
I don't know, folks. So the way I see it, this isn't going to be the world's greatest record
player no matter what. You're not going to play modern records on it and get it at real high
fidelity. It's simply almost like an institutional record player where you would play it at a
library or something, you know, or whatever. You take it out on a picnic or something and play it.
So it's just meant to make the music. It's not meant to make the music sound great.
So it's never going to be worth a bunch of money. It's not worth trying to... Really,
you don't have many options. You could buy a replacement crystal cartridge. You've got about
a 50% or 60% chance that the replacement one won't work, and it's going to cost you $30 or $40
at least to get one. And then you end up with a record player that's worth $35 maybe.
And it's skipping. It probably can't copyright strike me on that.
So we were able to rebuild the cartridge for like a dollar, play with the amp a little bit,
and remove a resistor. I don't know if I mentioned that, but basically
the way that amp is made, there's four transistors. And so the pickup is over here. It gets fed into
the first transistor, and then it works through the four transistors. The output of the fourth
transistor connects to the speaker. There is a resistor that connects back from the output to
the input, and I think they call that a global feedback loop or something like that. And it
has something to do with making the volume just right so that it doesn't distort or something
like that. Okay. All I did was remove that resistor because the more resistance you have
there, the higher it allows the output to be. So I took that resistor out and it gave it
the maximum amount of volume that we can have in this situation.
Yeah, see? Roy knows if that's the way you got to do it, okay, right? So we fixed it for,
I don't know, these things. I think I paid like a dollar a piece for it. I put two of them in
there, so that's two bucks. Maybe a dollar's worth of chemicals. That's three bucks. And then the
little piezo thing, I broke two of them. I mean, I broke one and then cut a piece off the other
one. So maybe I'm in at five bucks. I think if I would have done a better job on that piezo,
that I would have been all right, that I would have had even more volume. I think it's directly
related to the size of that. And at the end of that, I had chipped off a little piece of the
wafer. So I think if that would have been more smooth all the way across,
I probably would have even a little bit more volume, but it's pretty good right now. I would
say it's probably 60 or 70% of what the original volume probably was. So I'm cool with that.
Let me try a 33 and a 78 just to make sure it'll play those. So there's a little knob over here
where you can set the size of the record too, as well as the speed. Oh, it didn't like that
because I didn't have it up where it could drop it. We've got to manually do it.
This record is scratched out of crap, obviously.
We've also got the issue where that, you know, that needle is not the greatest.
They both say, it says LP on both sides. So it's,
you know, it's probably not the right size to play a 78 with.
And I don't really know what they're supposed to sound like anyway. So
let's see if the reject works. Okay. So it seemed like it was playing it. Let me go get a 33.
Love it. Wow. You don't know about this. You need to learn about this. I don't know what,
if y'all don't know about this, you just, you're very sheltered. You need to get out a little bit
more. All right. So yeah, obviously it doesn't sound great. Um, sounds all right. We'll let
them sing a little bit. I don't want it to, I don't want it to cancel this. I got to talk
over it a little bit. All right. Yeah. This is the good part about right here.
It's passable. In my opinion, I would listen to this, but I'm not like a high fidelity guy.
Obviously. I love it. Love it.
Yeah.
I know. Man, this guy could sing.
The Iceman. All right. Let's hear the end of it.
You can alter the tone a little bit with that capacitor. I don't know if I told you,
I put a 0.0022 capacitor over the pickup, over the, that two output wires of the pickup.
And it, it changes the tone a little bit because it was real tinny sounding.
Let's see if we can get it to ride out and then turn off.
I don't think it's going to make it. It keeps, sometimes it won't do the ride out.
I can't tell if it's getting hung. Is it dragging that needle?
It almost looks like it's dragging the little thin on the needle.
It's a little plastic crappy needles. I mean, it's just, all right. So I think we got it.
I think it's working pretty good. Obviously it's not perfect, but it sounds decent for certain
music. It starts cooking here in a second.
All right, folks. So there you go. So tell me what you think. Do you think there is any
practical application for putting the little piezo tweeter in these? Cause it,
obviously it brought the volume back. We were at no amplification because the crystal didn't
work at all. And now we are at the quality. Isn't that great, but was the quality great
before? I don't know. And we're playing beat up records. This one is also pretty beat up.
Um, I think for a record player like this, this might be the best option
because that piezo tweeter is never going to wear out and it, uh, or piezo element is never
going to wear out and you don't have to, uh, spend any money on it. It's just a couple of bucks
and you get the thing back running and working. And, um, it is what it is. It's,
it's not going to be high fidelity. It just wasn't designed for that.
So I hope you enjoyed the video. Leave your comments down below. And next week we'll be
back with more TV repair. This I'm trying to do different things to break it up. Cause that TV
takes forever. And I don't want to run like 15 TV videos in a row. I don't know that there's going
to be 15 of them, but I don't want to run 10 TV videos in a row. Um, whenever some people may not
want to watch a video about TV repair. So little record player repair video for you. And we did,
we did a video on oscilloscopes, just trying to break it up a little bit.
So I'll see you next week with more TV stuff.
