Repairing an 1865 Seth Thomas OGEE Weight Driven Clock (Our First Repair??!!!)

Amateur Repair Time
257 followers
1.2K Video Views·Jun 1, 2025
Check out our Patreon page, for all of our channels. Contains outakes, concise arcade repair tips, bloopers, repair FAILS, Audio youtube wouldn't allow us to upload, and much more!
https://patreon.com/JoesClassicVideoGames
------------------------------------------------------------------------------------
Ladies and gentlemen, welcome back to
Amateur Repair
Time. We're going to do an interesting
video today. Um, this old clock I have
had knocking
around for a few years now. This is
actually one of the first ones that I
bought. Most of the stuff in this room I
bought after I bought this
clock.
Um, I had one like a gingerbread clock.
you know, the gingerbread or the ones
with like the pressed wood on it, or
some people call them kitchen clocks. I
had a kitchen clock at the shop for a
little while. Um, but this was the first
one that I bought that was really old.
This is even older. So, we're looking at
1860s, something like that. And it's a
weight driven clock. There actually
weights still in there. But the
significant thing about all of this is
um this was the first clock that I
attempted to fix. So I started a video
here at the house years
ago and
[Music]
um took it all apart, cleaned
it, never finished it because I I I
realized that I didn't get I didn't have
the ability to clean it very well.
Um, but I filmed a video of it and all
of that
and did the whole shebang,
right? I never uploaded the video
because I never finished the clock. But
years have passed and I have
now repaired many clocks. So, I feel
like I can um
very competently or somewhat competently
I should say I should I can somewhat
competently
competently finish this clock. I really
like it. I think it's beautiful. I like
the dial how it's all kind of screwed
up. I bought this from a gentleman, and
I'm I'm probably about to tell this
story in the video, but I bought this
from a gentleman here in town who uh had
bought a new dial for it, and it it
isn't even the right type or anything,
but he was going to restore it and put
that new dial on it. And uh there's no
way in the world I would do that now. Uh
I'm going to leave it exactly how it is.
I'm trying to show you this one at the
same time. This is a much newer version.
This is like from the 70s, probably.
Um, uh, there's no way I would replace
this dial now, even if I had one that
was the correct type. Um, I'm just going
to leave it like this. I think it looks
great with the wear, especially if it
works. So, if you get them working,
tick- tock, tick- tock, and it's got
that wear on it, but you can see the
pendulum
swinging. That's pretty cool to me.
Um, so we'll see how that goes. All
right. So, I'm going to play the old
video now. It's a little darker than
this one. It was before I set up this
whole room. I set up this room just so I
could film videos. And I named the
channel Amateur Repair Time because I
knew that I was going to be doing a
bunch of clock stuff.
Um, if you go back and look at some of
the early videos on this channel, they
were all actually uploaded to our Joe's
video games
channel and it was just other electronic
things or things that I was interested
in. Um, I would try to repair, attempt
to repair even though I didn't really
know what I was doing and um, upload the
video. Well, I really wanted to do
clocks because uh, when I was a kid, my
dad worked on watches. He wasn't great
at it or anything. Not not saying that
to embarrass him or anything, but he
wasn't great at it, but he just loved
watches. So, when I was a kid, I had
like an appreciation for watches, too.
So, I always liked these old clocks, and
I wanted to um I wanted to kind of get
into them. And I had always heard that
clocks were a little easier than watches
because they're bigger, right? So,
whenever I purchased this one, I
intended to fix it and um keep it. I
have since got a bunch of them. I've
probably
got I don't know, and I'm not bragging.
All of these are inexpensive, but um
I've probably got six or seven of these,
maybe more that are this vintage, you
know. Um but I'd like to get one of
these weight driven clocks working. And
I haven't done one yet here on the
channel. And I have that video, so I
figured I would show it. So I'll show
you the video of basically that I made
whenever I first got it. And uh you can
see what you think.
We'll come back at the end to finish up.
Um, but it's going to be a multi-part
thing, too, because I'm actually going
to repair it and we'll we'll do that in
the video as well. Some of these clock
videos don't get as many views as like
the radio videos. Those actually get the
most views on this channel. But to be
honest with you, I don't really care.
There's a thing on YouTube where they
want you to make videos for one market.
So, like your subscribers, if somebody
subscribed because they like the radio
repair stuff, uh they may not like the
clock repair stuff. So, I've kind of got
a split audience. There are some people
that subscribe because they like the
clock stuff, but they don't care about
the radio stuff. And then nobody cares
about the film projector stuff, but what
whatever whatever. Um, so I'm going to
do several videos here in a row about
this clock, and hopefully that doesn't
offend all of the radio people. But I
did do several videos in a row about
that radio just recently. And I did
several videos in a row about that radio
recently. And I'm about to do several
videos in a row about that radio
whenever we finish it up. So there's
going to be plenty of radio stuff, but
we're going to do a little bit of clock
stuff here for a little while because I
want to get this thing up and running.
It's a project that's just been sitting
around for literally several years now
and uh it's time to get it going. So,
we'll rewind time a little bit and show
you the video that I made whenever I
first picked this thing up. It's a
little darker. Like I said, I hadn't set
this up. I've got a really bright light
behind me here that helps make all of
this bright. I've got those lights back
there to help brighten up the walls and
make the room bright and all of that so
that the videos look better for you. But
when I filmed this, I was just doing it
uh on a table without much light. So,
hopefully that doesn't offend you. But,
uh I'll see you here in a few minutes.
I bought this clock. Gentleman had it
listed for sale on Craigslist. It's an
old, I believe, a Seth Thomas
um clock, you know, an old movement
clock. I've been messing around with a
couple of these lately and saw this one
and thought, "Hey, you know
what? This might be a cool little
video." So, this guy put this up for
sale. I'm going to tell you what I paid
for it just because it'll be an
interesting uh help make the video more
interesting. I paid $75 for
this. And uh he put it online and he
said that his mother owned it and he's
in his 70s now. His mother uh passed
away. I think she was born in 1920. He
said
um and he said that as long as he can
remember since he was a little boy uh
this clock was in the hallway of their
home. So, he he said that he believes it
to be at least 70 years old, but just
looking at it, I think it's even older
than that. But we'll see. Hopefully, we
can find a date in it or something. But
I think it's a Seth Thomas clock. And
I'm I would guess just from the looks of
it, maybe from the
1910 to maybe
1920, maybe. I am not a clock guy. So,
if you're watching this to uh uh learn
all about
clocks, we're going to look at this
clock, but I am not an expert on it. We
but we'll see what we can get done.
Right. So, um just guessing that just
the look and the style of it. I don't
think this looks like 1950 at
all. If it was 70 years old, it would
have been bought in
1950, 1952. And I think it looks much
older than that. By the way, that's just
a piece of paper in there. That's not
the dial. We'll look at the dial here in
a minute.
Um, it's in pretty good shape cabinet
wise. The rest of it is not. But we'll
see if we can get her up and running
again. Uh, the gentleman said, um, so I
asked him specifically, I said, did uh,
you know, he said that he remembered it
being around since he was since he was
young and, uh, that it would strike on
the hour and all of that and it sat out
in the hallway. So he he gave me this
shelf that he said it always sat
on. Right
now I don't know that that would have
came with it. It may just be that that
was the shelf that his mom uh was using
for
it.
But it does look like a pretty old
shelf. Okay. So, we'll keep that with it
since apparently it's been with it a
long
time. Okay. And so, I asked him, I said,
"Well, your uh your parents, were they
the type that bought used things or
would they have likely bought this new
at a store?" Um, and he said,
"Uh, you know, he sold this on
Craigslist." And so, he said, uh, well,
you know, back then there wasn't a
Craigslist, so they I don't think they
ever bought much used. But I was
thinking, you know, it could be that
they went to an actual clock store back
in the day when there probably there
probably is no such thing as a clock
store now, but back in the day there
likely was. Maybe they went to a clock
store and uh uh bought a used clock at
the clock store. Who knows? Or it could
have been her mother's. But you'd think
if it was her mother's maybe she would
have mentioned that at some point, you
know, hey, yeah, I remember when my mom
loved that clock or something, you know,
but he had he had no recollection of
where it came from or any of that, but
said that they'd had it in the family
all this time. So,
um, we'll just take a look at it and see
what we can figure out. So, I'm going to
show you what all it came with. Here's
the This is just a piece of paper. So,
let's get rid of that. He got that
somewhere because it looked very similar
to the original dial, but that is
literally just a piece of
paper. Okay. He said he picked that up
somewhere. This is
apparently the original
dial. So, it's pretty worn,
but I don't think I would touch that up.
I think I'm just going to leave it like
that cuz it looks cool. It almost looks
like it's supposed to be like
that. What do you
think? Pretty cool. So, it has this
little floral design on the
outside. And I've heard that the
hour marks can help you date
it. The little square
part where the hour is. something about
a circle or
something. We'll figure that
out. All right. So, you can see what's
left of the little roses or whatever
that were supposed to be around the edge
of
it. Down here, it's kind of intact.
Look how cool that is. So basically, you
know, for value, these are not really
worth much. And with the face with the
dial like this, I doubt it would be
worth, you know, it might be worth if
you get it all the way up and running.
Everything's perfect on
it. Well, not perfect, but you know,
perfectly
working. H it might be worth 150 bucks,
something like that, right? So, it's not
it's not super valuable because if
somebody's going to collect one, they're
going to collect one in perfect
condition and one that's got all the
tricks, right? This is just a standard
one. Um, probably wasn't all that fancy
when it was new, but Oh, and they're
they're useless pretty much anymore. I
mean, everybody's got a clock on their
VC on their Well, VCRs are useless, too.
I almost said VCR. A clock on their
Blu-ray
player. Well, that's useless now, too.
There's a clock on your
microwave and your smartphone,
right? But if you think about it, back
in the day, these were kind of important
before before the quartz clocks came
out. This would have been very
important. So, he's given me the stuff
and he shows me this. So, he said he
bought this at some point and was using
it up in there. And this is a battery
operated, but strangely enough, it is a
Seth Thomas clock, which I'm not
positive this one is. I think it is, but
we may be wrong. It may just be that
this is the Seth Thomas clock. So, Seth
Thomas apparently. And again, I'm not an
expert on uh clocks, but hey, we're
learning, right? It's fun looking over
these things. So,
uh, this is a, uh,
wh I hear another one. What in the
world? They're multiplying. This is a
battery operated one. But look, it takes
a big
battery. Takes like a C battery. So,
that tells me this is probably an old
one. It also was made in the USA, which
means it's got to be old cuz they ain't
made nothing in the USA in at least 15
years.
Um just the look of
this 70s I think.
Right. So So at some point they picked
this up. So apparently this has been
broke. This clock has been broke for a
long time. Let's see who that store is.
They bought it for $7.99.
Jordan Marsh. Well, that store is old
enough that I don't even I've never even
heard of it. Oh,
27.99. 27.99 from Jordan
Marsh. This looks like the type of stuff
they used to sell at like service
merchandise and
stuff. All right, so this was the
Courier and
Ives. Do not leave dead battery and
clock. use 1 and 12 volt sea cell sea
cell and then it says Thomas Connecticut
USA. All right. So he said at some point
he got this and u you can kind of set
that up in the top. It'll it'll kind of
fit in there and he was using that um to
display it. Okay. So that's kind of
cool. And so then he had this and he was
telling me that he thought this was the
original
instructions for for the old clock that
had never been
opened. And so I you know you know I
work on old pinball machines and stuff.
So I just took a quick look at this and
thought there ain't no way because it
don't look right to me. Let me tell you
all the ways that this doesn't look
right to me. This So he's we're thinking
this is 1950 or older.
I don't remember, now I'm only 43,
right? I don't remember ever seeing a
plastic bag from the 50s. I think there
were plastic bags in the ' 50s, but
maybe they've all disintegrated or
something cuz I never see anything old
from the 50s that has a plastic bag.
When I see things that came that were
made in the ' 50s, um uh they're just in
a box. They don't they didn't
individually wrap them and then put them
in the box, right? So, if this was from
the 50s, I think they would have just
put this manual, which probably would
have been bigger. Um, they would have
just put it in the bottom of the clock
and you just got it with it. I don't
think it would have had a bag. And so
then I was looking at
it, you know, so Seth Thomas was a very
famous clock maker and then of course
the company based on his
name. See, it says Seth Thomas Division
of General Time. So, that tells me that
it had already been bought out. Now, I
don't know when it was bought out,
but I don't know. It just don't seem
right to me. Right. And then if you look
on the
back, look, there's one that says the
Thomas Service Center in Thomas,
Connecticut, which is where that Seth
Thomas clock was made. And then if you
look at it a little
more, there's a freaking battery in the
bag, I think. Isn't that an old
battery, right? So, I don't think this
has anything to
do with with that clock. It just isn't
old enough. And I don't even know if it
has anything to do with this clock cuz
the battery is different. It's a newer
style, you know, like a watch battery, a
button cell battery. So, I don't know.
And I don't know what this little bezel
would be. I might pull that out of there
here in a little
bit. Printed in Germany. I think we
could finagle it out of there without
taking that that that uh staple loose.
What do you think? Okay. So, I think
that has nothing to do with it. This is
a replacement. That's fine, though. I
see where he's coming from. I don't
blame
him. Okay.
So, we believe this to be the original
clock face, but it doesn't say Seth
Thomas on it anywhere. And then on the
back has a lot of paint dripping through
the hole in the
front. Um, I don't know if that's
normal, if that's how those were made. I
guess if they were hand
painted, maybe it would get real sloppy
like that. But would they hand paint the
whole doll? I don't
know. I don't know,
people. So, this could just be a bunch
of parts from clocks from over the
years. We don't know, but we're going to
figure it out. So, there's that. And
then we've
got the
weights. That's good to have. So he we
packaged these up just so they wouldn't
bust everything else
up. So if you don't know anything about
these old
clocks, they need weights to run. So one
of
them, this appears to have an R on it,
which I would assume means it goes on
the right side. One of them would run
the actual
clock spring and one of them would run
the the uh the strike or the chime or
whatever it
does. So that's one
way the right one. Maybe if this one has
an L, we'll be home free.
Well, it's not marked. But you know
what? This R one is the exception that
proves the
rule. If it's marked R, you know that
one's an L, if that's what it means. I
assume that's what it means. But you
know what happens when you assume? But
we'll figure all this out. So, we got
the we got the two weights. That's
good.
Um, and
then we got more
stuff. More stuff is coming, people.
We've got more stuff.
Let me see if I can find all of
it. There's stuff
everywhere.
Okay, so here is the
movement. It would be interesting to see
if we can figure out if this appears
original or
not.
Um, looks a little
beat.
So, there are strings all over the place
which would have been, I assume, used to
hold up the weights. They've since
snapped and broke. Let's be very careful
if we can here.
Well, it's a brass movement, which looks
right because I believe the
dial, if you think about
it, this dial, see, it has a big hole in
the middle. It's so that you can
see the gears behind it. And once they
started making these out of brass, they
uh they showed them off a little bit.
Okay. So, uh let's see if we can get
the string out of
there. Look at it's wrapped around that.
Okay, that makes sense. I guess I guess
it has to wrap
somewhere. All right.
So boy, it is
everywhere. Well, let me get that loose
and then uh we'll look at it a little
closer.
Okay. So, after examining it a little
bit more, it appears what's happened is
at some point the string has been caught
in the in the
running clock. So, there's several
areas where the string is all caught up
in the gear. So, that shouldn't be in
that gear at
all. And then it's caught under that
gear as
well. I'm not sure if it was supposed to
tie over there.
And then it's wrapped around the frame
there, right? I mean, it obviously looks
like it was supposed to be
there.
Um, so the deal is that's all old string
anyway, so I'm going to have to rewind
it anyway. So, I'm going to go ahead and
cut it out. I'm just going to cut all
the stuff out of all of those gears. You
can try to force the gear, you know, to
get it through there. But if you break
one of these teeth, then you're looking
for a weird
gear. Weird gear. That's a uh that's a
phrase I've never used before. Okay. So,
I'm going to uh I can't The only way you
can really set it down is on its back
because you don't want to set it on the
face and screw up your
hands. They make a lot of these parts
still. You wouldn't think they would. I
don't know about for this particular
clock, but they still there are tons of
gears and frames and bushings and all of
that around to replace all of this
stuff. And the the twine, of course, can
be replaced. So, I'm going to cut it
out. Let's see if we can get it out of
all of those gears that it's found
itself meshed in. And then it looks like
we've got a whole bunch of stuff that's
bent out of shape. And then of course
the main thing with these usually is it
seems is that uh they're filthy so you
got to clean everything on them. And
then
um you don't need it for it to run. But
you have to lightly oil all of the
bearings. If you put a ton of oil on the
bearings, it'll screw it up too cuz it
gets dirt in the bearings and messes it
all up.
But I think first first thing is I got
to cut off all of that twine and then
we'll find what the it looks like
there's a maker name there. We'll see if
we can figure what what out what that
is. We'll do a little research if we can
find some pictures of how this thing is
supposed to look. We can bend everything
back into place. We can
see like look at this big long one.
It wants to do its thing,
people. It wants to do its
thing. All right, I got all the twine
off. Boy, it was all over the
place. So, all of the gears are free
moving now because the twine's not
holding them in place. Some of them
though are a little bent and stuff. I
can It seems to me like this isn't a
very high-end movement. I think it's
probably well built, but I don't think
it was really expensive.
I can't quite read that makaker
mark. I think it says S.
Thomas, Seth Thomas, and then it's
saying Plymouth
Town, Connecticut, but there's no
number. Oh, wait a minute. Actually,
there is under it. What is
that? Can't read it. You see it, right?
All right. Looks like an eight
maybe. Kind of looks like an
eight.
H. Can't get Oh, we got a flashlight, I
think. Flashlight. Flashlight time. We
need more light on the subject.
Well, the
light won't let us
focus.
Damn. So
close. Uhoh.
Is that an
eight?
H interesting
people. Very
interesting. Okay. So,
um it's hard to hold it and show you
everything. So, I'm just tinkering with
it. Basically, you
can wind
it with this little
tiny handle that was inside of the
clock. So, this side here is
the is the timekeeping side.
Okay? Hear it clicking? Well, what it's
doing is it's turning that spindle
there.
Okay. So, that
spindle when it's mounted in there,
there is a string. See how I'm turning
it and it's coming? It's going
clockwise. So, it's mounted about here.
There is a string that goes up and and
around a like a
um basically a
uh a
pulley at the top and then down in this
cavity and then attaches to the weight.
So when you turn that, what you're doing
is instead of there being a
spring, it's lifting the
weight.
Okay.
So that's the one that keeps time. This
one on this
side, same
thing, but you turn it the other way.
And so, same deal.
It's turning a line that there's a
pulley here, too. But there's also one
in the top. But the pulley lifts a
weight from here. I've looked all over
this thing. I didn't find any markings
at all anywhere in the cabinet. The back
of it has been painted
white. Okay. There is a little latch
there that kind of holds the movement in
place and the movement slides right in
there. These, I believe, may have been
where the chime mounted or the bell or
whatever it is. We'll have to find some
pictures of it. Okay, so that's how you
wind it. And again, when you wind it,
all you're doing is lifting the weights
inside the cabinet. Okay, so obviously
this is the front. This is the face.
This must be the pendulum. So after you
wind it, the weight of the of the um
pulley of the of the the actual weight
makes this slowly
turn which ultimately turns this
one which is regulated by the weight of
the
pendulum. Tick tock tick tock tick tock.
right now. There is a spring
here of some
type, but I don't know what mounted to
that. But again, we're going to have to
order some parts. So, I'll look at
pictures and figure it out. So, that's
that. And then there's this really cool
part over here. That is the
um that is
the
chime.
Boom. So, it would have hit a chime or a
bell or something. Or maybe it's down
here. I don't
know. Right. And then if you look at
this wheel here, see all these
indentions? Basically, this piece
eventually tries to fall down. There's a
spring on it. So, it turns
around. It won't do it right now because
of Yeah. Okay. So, eventually it goes
down and it tries to go through this
gear. Well, if it hits one of these
teeth, it chimes again, right? So,
depending on where this wheel
is, it chimes once and then this gear
turns and then it falls back down. And
then the next time it's two, next time
it's three, next time it's four, next
time it's five, next time it's six. So
this wheel is how it keeps track of what
hour it is for the
um for the
strike. So very cool. All right, so I'm
going to have to figure out how to clean
this thing, though. I'm going to see if
I'm going to look online and see what
the experts say. I'll bet I can just
soak this thing and clean all that brass
up. But we got to get it looking kind of
nice.
uh because you'll be able to see some of
it from behind that
dial. But but with the twine off of it,
it is actually working. It's just
filthy. So, it needs to be
cleaned. Oiling it won't really help
because it's just so dirty. All right.
If you oil one, that won't really get it
working again. If it's not working, it
needs to be cleaned. It's dirty, right?
The oil is not really going to get it
going. The oil just kind of protects the
bearings.
And you just put use a little tiny bit
of it. So it's not one of those things
where you can just oil the heck out of
it. Now there is almost like a varnish
looking thing stuff all over it.
Somebody may have sprayed it with
WD40. Horrible idea. Don't do that.
Don't use WD40 to lubricate anything.
Okay. So
um I'll have to soak it and do a video
on that. But let's see if we can figure
out get some kind of idea of what year
this might have been made.
All right, folks. So, we are on clock
history.com where they have a bunch of
history of these Seth Thomas clocks.
Okay? And they talk about the movements.
So, this is one way you can identify the
time period. Okay? So, the earliest one
was the 1.243. Then the 1.241, they had
an early, a middle, and a later. Okay?
So, ours is this 1.241
later. And the reason we can tell that
is because by the time they got to the
1.242, they had screws that hold the
plates
together.
Okay. Ours
is, see where it says shallow teeth on
count wheel, only a triangle portion
projecting above the rim. Round brass
hammer. That's
ours. And then it says transition
movement has pinned plates like 1.241.
241 but plate is shaped like
1.242 i.e. it has the projection by the
time second
wheel
pivot. So we have the round brass
hammer. Some of them had like a little
semiircle cut out here but this one
doesn't. Okay. It has the pins that hold
the plate
together and it has the semi-ircular
On the earlier
ones, this was just
straight, but it was this pivot was too
close to the edge. So, they whenever
they remade them, they put a little bump
out here, right? And then the
teeth on the count wheel are only a
triangle that sticks up above the
rim. Okay. So, this is clearly the one
they're talking about. Now, notice
too that on the hand about halfway down,
there's a big
circle. Transition movement has pinned
plates like
1.241, but plate is shaped like
1.242, i.e. It has the projection by the
time the second
wheel pivot. Okay. And then once it gets
to 1.242, it has screws. Right? So we
are the transition
movement. The one right before it was
the shallow teeth on the count wheel
only a triangle portion projecting above
the rim. Round brass hammer. So we're
right there. We're right in the middle
of that is where our uh is where our
movement is. Okay. Okay, so we're still
on clock
history.com. Around
1860, he has this clock that he's
bought. Wait, another one's going. I
heard another one. Around 1860, he's got
this clock that he found. Right now,
look close at the face. See how it's
very similar to
ours? Very
similar.
Okay. Uh the dial is metal. It has one
ring drawn around the minute
marks. Uh, it has dots for minute marks.
Well, ours does not have dots. It has
dashes. And the movement is the 1.241
middle with the brass hammer. Ours was
after the
1.241 late. Okay. And so the next one
that he has identified on his page is
from 1870. Now, this one, the case is a
little different. This is they call it
the the OG case.
The OG case. I guess they're
gangsters. Okay. OG case. Thomasson
label. Now, ours doesn't have the label.
It looks like it's been removed and re
revarnished or something. Plymouth
movement. Blah blah blah blah
blah. The Plymouth movement. What
they're talking about is where that said
Plymouth. And by the way, that didn't
say eight. It was an S. When I looked at
a little closer, it says USA.
Right. So this is
1870
movement Plymouth type 1.242 with the
pillar screws. So the pillar screws
started in 1870. Holy crap. Look at the
face. See the little painting around it?
And it has the lines for the
uh it has the lines for the minute
marks. But ours has a circle right
here, right? And we have the little
circles halfway down the minute hands.
Remember it was saying there's a
transition
one. Well, look. This has the little
dots. It's the same flowers as
ours. And it has the circle around the
middle like ours does, but ours has
little lines. And if you
look, his hands have the circle down the
middle. So ours is halfway between this
one and the other one. So this thing's
from about
1865. Holy crap. So his mom didn't buy
it, I don't believe. Uh new. I don't
think that
happened. I mean, she was healthy. She
lived into her 90s, but there ain't no
way in hell she bought this brand new.
Okay, that's just all I'm saying. So I
think it's from 1865. All right. So
there you go. So I'm gonna fix it up a
little bit. Our case looks a lot like
that one, too. just not quite as nice
anymore, but and uh our glass is just
clear. They they've uh removed the paint
at some point,
unfortunately. All right. So, there you
go. So, I'm going to uh look into how to
um clean that whole movement. I want to
get it nice and, you know, clean and
then we'll test it out. I think it would
keep time. Right now, though, I got to
figure out how to attach the pendulum,
that spring underneath it. uh on the
movement. It looks like
um that um that's going to be the what
do they call that? The u I think it's
just called a pendulum spring. It's it's
what holds the actual weight. That
little uh lever that moves to the side
doesn't actually hold the pendulum. It
just attaches to the
pendulum.
Um so I'll have to I'll have to look
into I think I can take that whole thing
and soak it in something and it'll clean
that up pretty good. And then uh we can
oil it and rering it and uh hang the
weights again and I think it'll get it
going. But uh I'm just going to leave my
my uh dial obviously doesn't look as
good as that. But I'm just going to
leave it the way it is, I believe, and
we'll mount it all back in the
case. Okay, folks. So, it is viewer mail
time.
Today's viewer mail comes from Kelsey
from Brighton, Michigan. I believe
that's what MI stands for. Let me
think. MI. That's not
Maine. It's not Mississippi. That's MS.
Maine must be
ME. There's no MG. It's got to be
Michigan. Here is our address if you
want to mail us a letter or something.
Joe's Classic Video Games, 139 Codwell
Street, Rock Hill, South Carolina 29730.
I'm Ron. My brother's
Joe. Let's see what it is. It looked
kind of
cool. All right, so it's Kelsey. I won't
say the last name or the phone number,
but it's
here.
Oo. Ah.
Nice package, by the
way. It
says, well, let me get them out of the
bag. Even the bag's pretty good. I
wonder what that's from. Look, it's a
nice high
quality older bag.
Ronnie project for you on page
162. Kelsey is a
poet. None on this
one and none on that one. The PM pre-cut
house. I wonder if that's the project he
means. He probably means on the one with
the sticker on it. But Donnie and I are
thinking about building the house
producing. We can do it.
Look, I've known some construction guys
and I like
them. But, you know, if they can do it,
I can do it. It's just a lot of hard
work, you know. Let's see what's in
these. So, there are three volumes of
Popular
Mechanics. This one is March
1955 report on the Chevrolet V8. That's
pretty cool. 35
cents. Popular Mechanics magazine. It
says written so you can understand it.
Oh, I like that. That's kind of what I
base my videos
on. I try to make like pinball repair
where people can understand
it and there's no barriers to
learning. Uh, Color TV is here. Try your
hand at modeling the USS Midway. What
owners think of rear engine
cars. Well, that's pretty
cool. All right. And here is the one
that he had that it was January of 54.
So this is the September 1954
issue. Let's see what we
got. Let's see the
cover. Hi-Fi is sweeping the country.
What's it all
about? Report on the Cadillac.
how to shoot over
decoys. Okay, you can see that he's
chilling with his tube amp on the floor
and his honeys hanging up speakers on
the wall the hard
way. They've got one mounted over here
to the
door. There's wires
everywhere. They've got a record
precariously perched on the record
player, but they both look happy and
that's all that matters. Page 162. I am
told there is a project for me. Let's
see here. We went too
far. Wow, there is a lot of cool stuff
in here
actually. How to transmit phono music on
a light beam.
There is something about
the I think it I think it was a Filco
thing. Let me think. Was it Filco? Yeah,
it was Filco. You know, we did that
video about this Filco
uh radio record player that Kermit we
got from Kermit
um from Craig, which is Kermit's son.
And uh when I was researching that,
that's from the 40s. There was some kind
of light beam type gimmick that Filco
did for a while. Uh I believe that's a
Filco it's sitting on too. I wonder if
that has that light beam thing I'm
talking about. Um so there was some kind
of light beam pickup type thing at some
point. So this may be
similar. How to transmit phono music on
a light beam. Let's look at the
pictures.
photo cell
housing, a Fresno lens. Those are
cool but
dangerous. Uh, photo
cell receiving
[Music]
amplifier loudspeaker
enclosure. That's the receiving
station. And then here is the photo tube
receiver amplifier.
It has a rotary selector switch, volume
based
treble, on and off pilot light or on
andoff switch and a pilot
light. Uh, it's
got four tube sockets. Got a few
capacitors there, some audio terminals,
output transformer, and a power
transformer. Photo tube input jacks.
Okay.
Here's the transmitting
station. There's a transmitter. There's
the record player. There's the
mic, the condenser lens, the crater lamp
housing, a record
player, and the two conductor shielded
cable. This is showing how the lens is
made. Crater glow lamp and lens.
crater type neon glow
lamp. So, how are they doing
it? There is the beam
transmitter. I mean, they're showing you
how to actually build the thing. That's
pretty
cool. All right, let's see what's on the
next
page. Went too
far. It is the schematics.
Crater type glow lamp top mounting octal
socket
lens. Let's see if they explain how it
works. This experimental two unit system
is a lot of fun to operate. The idea is
not new to electronic laboratory
technicians, but no peaceime
applications for it have been suggested.
Perhaps you can figure out some
practical use.
One unit consists of a simple
transmitter with provision for phono or
microphone input. Most radio hams have
many of the necessary parts in their
junk
boxes. The audio input at the
transmitting end is amplified and sent
as a carefully directed pencil-like beam
of modulated light across
space. At the receiving end, it is
converted into electricity by means of a
photo tube and the amplified output is
then fed to a loudspeaker. In other
words, it is a light beam transmitter
and an electric eye audio amplifier
receiver with high quality output. The
complete assembly for the receiving and
transmitting stations as illustrated in
photos A and D. In the transmitter, the
plate of the output 6VG6
uh tube is in series with the Slovenia
model
R1131C crater type neon glow lamp. Lamps
of this type are available from radio
parts houses and are used in faximile
transmitting systems. Due to the cost of
this lamp, a DC
millimeter is always set at 20 milliamps
to protect it from overload. The beam
can be projected from 5 to 30 or 40 ft
to the received photo tube with the
lens. The beam can be intercepted at any
point along the path. You can literally
stop the music by placing your hand or
anything opaque in the beam. The input
at the transmitting end can be picked
can be either a crystal phongraph pickup
output one volt or a high impedance
impedance microphone. If the crystal
phongraph pickup has low output less
than one quarter volt connected to the
mic
jack. Well, that sounds pretty freaking
cool. I don't know that I have the
technical capability to do
it. But it's pretty sweet. But what's
more valuable to me than even that is
these magazines. I think this is cool.
I'd love to read through
this. Um, looks like there's all kinds
of cool stuff in there. So, Kelsey,
thank you very much. I appreciate you
sending me this. I'll uh I'll give them
a read and um you never know. I may do a
video trying to transmit
light from here to the other side of the
room or something. If I do, I'll
probably get up on the roof and do it
and try to do it down the street or
something like that. I'll give it some
thought, though. So, I appreciate you
sending it in. All right. and back to
your regularly scheduled video. All
right, so I put that little
radio uh popular mechanics bit in there
for all of you radio fans who struggled
with this through the clock
video. So, hope you enjoyed it. Um, so
I'll see you again next week where we'll
keep working through it. I've still got
more that we did in that video, but in
next week's video, we'll get into
cleaning it. I've got an ultrasonic
cleaner, so I can I can now actually
clean it pretty well. and I've
disassembled and reassembled many of
them, so I don't feel um I don't feel
like it'll be a problem taking it apart
and cleaning it properly. But we'll do
all that on next week's video. So, I
hope you enjoyed it. Now, if you do like
the clock videos, we have done other
clocks. I enjoyed this one. So, check it
out and we'll see you next week for yet
another one.
