Thank you to everyone who has been supporting our channel! If you use the link below before you purchase anything on Amazon, we get a royalty for sending you there, thank you!
Our store is located at 139 Caldwell St., Rock Hill, SC 29730.
ladies and gentlemen this is Joe's
classic video games back with another
cool arcade game pinball machine repair
video for you this evening early evening
we got in this Star Trek pinball a while
back this is the original one and that's
my Oscars Wild Ride gumball machine
talking in the background never mind him
we got in this pinball machine probably
a year ago and we're just now getting
around to working on it
and so I figured I would videotape some
of the records some of the stuff that we
do to get this thing back up and running
we're gonna try to make this pretty nice
so just to document it the cabinet has a
little wear but it's in pretty good
shape we're not gonna make it look brand
new we're just gonna make it look nice
so there's a little wear around the
buttons not sure what we're going to do
about that yet if we want to attempt to
touch it up or just get it real clean
there's a little bit of wear on the back
box the blue blue will touch up pretty
good yellow as a comp it's kind of hard
to touch up the back glass is in pretty
good shape it's not perfect but it's
pretty nice so I think we're good there
and then the playfield oh playfield
needs some help people first of all it's
filthy someone had already removed a
whole bunch of the plastics and I
believe yeah I believe that are inside
or most of them at least but it has
heavy heavy wear in the center there so
that's gonna take some doing they make
an overlay that we're gonna put on it
that does the middle part with the text
but we're still gonna have to do some
touch-up paint and stuff so we'll have
to do that and we'll tape that so we can
see how that turns out a little bit of
wear up here too like I said we're not
gonna get it perfect but I think we can
get it a lot
either than this so I figured we would
do a good before video and then work our
way through it the main reason we do
that is we're not trying to brag or
anything we're just trying to show
people that if you run across something
like this yourself don't be scurred
you can fix it it just takes a little
bit of time a little bit of work and you
just work through it systematically so
it looks like it's it needs a ton of
work and it does but it you know if you
go through it slowly you can get it
where it's a pretty presentable and well
playing machine so I'll open up the back
box and we'll see what's going on inside
of there I pop the back glass out and
first thing you see is four of the
displays they're missing one display is
still there for whatever reason I guess
they needed these ones but they didn't
need that one so see if we can get this
sucker open everything looks good on the
back of the insert alright so who hmm
even the Transformers go on people so
there's a power transformer that goes
here that's missing there's a solenoid
board that goes here that's missing but
that's that's not too big of a deal
because we've got plenty of those and
then the main mpu board is missing too
which isn't too big of a deal because
we're going to put a new one in how
annoying is that the hero phone that
nobody's answering
I think you'll get the hint all right
the soundboard is kind of specific to a
to some of these earlier ones so you
kind of need this this is kind of hard
to find the right one there's two
different little prom chips so you kind
of need the right board and then you
need the right prom as well so I'm glad
that sooner because that'd be kind of
hard to find but the solenoid board and
the mpu board we've got plenty of and
like I said we're going to put a new mpu
board in it anyway so I need to find a
transformer a solenoid board and an MP u
board so that's what's going on in the
back box next I'll take the glass off
and we'll look inside of the bottom and
see what's going on okay we're down in
the cabinet and no transformer mm-hmm
that sucks that's kind of a that's so
hard when you get kids you have to have
it shipped and they're heavy all of the
wiring that goes up into the top is back
there so that's good the bottom of the
playfield looks pretty good but there's
a bunch of stuff missing so like they've
removed the coils for the flippers
they removed of course all the drop
targets which isn't that big of a deal
because we probably would have put new
ones on it anyway one of the springs is
missing these minor stuff like that I
think there's there's a coil like a
thing that goes here that's missing some
of it may be in this box well there's
the bottom of it so maybe looks like the
this is a lot of the plastics and things
so this is somebody's project that we've
inherited and we'll see if we can do
what they couldn't so I think the first
thing I'm gonna do is I'm gonna try to
find that transformer we've got to get a
transformer for this thing so I want to
see if we've got one or if we can take
one out of another machine or something
or if we can order one
so I'll be back when we're messing with
that so I looked in our parts room and
either I knew in the past that I needed
this or I ordered one for another game
that I've forgotten about but I have all
of the transformer stuff in my parts
room so this is the bracket it mounts in
the back and then this is the
transformer which is actually the hard
part to find because it's so heavy it's
hard to chip so this is an e - 1 - 2 - 1
- 5 Bally transformer which is the exact
one and I need and some whoever shipped
this to me cut the wires but left them
all on where they go right and I also
have a rectifier board this looks like
it's really bad but really it's in
pretty good shape and then this is the
cage that goes around it in the back so
we're gonna update this a little bit now
you see they left all the wires attached
to where they go on this and so this
goes like that and then this transformer
mounts on there like so and the
transformer mounts right there and some
of the wires go on the front on the top
and then some of them I mean on the
front on the bottom I think and then
some of them wrap around to here and
then once you mount it in the cabinet
you put this around it like that to
cover the transformer so I've got
everything except whatever bolts and
screws I need to put it all together
with but the first thing I'm going to do
is I'm going to work over this rectifier
board a little bit so we'll get the
soldering iron out and start messing
with that a little bit I found another
one of these mounting plates that still
even have the screws in it and has this
little heatsink thing that we need so I
think we're gonna use that instead so on
the rectifier board I didn't really have
to do much to it it was it's actually in
pretty good shape it looks bad but it's
not one of the connectors was burned up
a little bit so I replaced it all of the
fuse holders are fine and doing their
thing these four
diodes are fine they've replaced two of
the bridge rectifiers that used to be
mounted on the backs of the ones in the
middle two of them have been replaced
and all three of them are fine there's
nothing wrong with them now you could do
all kinds of updates to it if you want
you could even put a new rectifier board
on it they make this board brand new you
could replace all of the bridge
rectifiers with even bigger ones you can
put heat sinks on them just in in my
experience usually none of that's
necessary the original stuff works
pretty good if you've got burnt up
connectors you should replace those and
even more importantly replace the pins
and the connectors that go in but we'll
do that here shortly so oh and the
electrical tape on the back that's
probably from the factory I think they
put that on there just so that these
wires wouldn't short out touching some
of the pointy stuff on the back
you should reflow the solder on all the
connectors which somebody had already
done so we're going to mount that on
there and then we're going to mount the
transformer there and it goes sideways
which I didn't notice earlier and they
it looked the reason that these wires
are like this on the end is because they
unsoldered them from whatever the
previous transformer was so what I need
to do is go back and one by one take
this wire off and then solder the
appropriate one where it goes so we're
gonna do that now all right so I
restarted on one side luckily they left
the wires long and now I have to do the
other side so you can see kind of how
there you go easy peasy people nothing
to it here's my junk so I'm gonna do the
other one and then I'm gonna mount it
back on the board now I don't know if I
made it clear usually you don't have to
do this I just have to do this because
I've got parts laying around I need to
make a transformer out of so usually if
you're working on one this will still be
together and in one piece and you don't
have to unsolder anything if you need to
work on it you can just take it loose
and work on the back but such is how we
found it so we'll put it back together
so we've got all of our wires
attached how they're supposed to be and
I guess I didn't make it clear earlier
what this actually even is this is the
transformer that transforms the line
voltage coming out of the wall
which is one hundred and ten hundred
twenty and all the different voltages
that the pinball machine needs or some
of the voltages to the pinball machine
needs I should say so
it transforms the voltages so they come
in on these bottom two wires here that's
the one twenty out of the wall and they
go through a bunch of windings inside of
this this is all just a bunch of wire
wrapped up and there's several different
windings of wire in there so there's
there may be one that doesn't even touch
the other ones and all this stuff well
these little tabs up here depending on
how these two are wired if you look
their own specific ones like its own
number one but it's also jumpered over
to number three and then this one is on
number that a nine nine and it's
jumpered over to number eleven so it
depend on how you wire it up it runs
power through different wires and blah
blah blah blah and then the power that's
on the other end of these is a different
voltage right and then on this one it's
got so much going on that there's some
on this side too and these are all
different voltages and you can see that
they're all numbered on the paper so
those voltages are all AC voltage now
I'm no electrician or expert on
electricity so take what I say with a
grain of salt but they come out of the
transformer is AC voltage and they go
over to this which is called the
rectifier board so the rectifier board
rectifies so it turns the AC power all
the different AC voltages into DC
voltages so the wires are soldered onto
the back of the board at different
places and they run through different
things mainly these bridge rectifiers
when you run AC voltage into a bridge
rectifier you get DC voltage out of the
other side and depending on how much of
Ault did you run in you get a different
voltage out the other side so once it
does that it runs through fuses and then
it runs into these pins here it's
connected to the pins on the back these
pins have little connectors that go to
different parts of the machine so this
basically provides all of your power to
different parts of the machine
and there's some little test connectors
up here where you can measure the
voltage to make sure that it's how it's
supposed to be there's one voltage that
goes through and doesn't go through a
bridge rectifier because it stays AC
voltage I think it's the I think it's
the illumination like the lights I think
it's like six volts and it's AC power
instead of DC power but basically the
reason we're starting with this is
because this is the first place to power
rooms so we're just systematically
working through the electricity going
into the machine so the plug plugs in
I'll show you that in the cabinet and
then it immediately runs into this so
we're getting this right first which was
missing so without this you can't do
anything the machine won't do anything
when you plug it in but we're going to
put this back in and then I'll show you
how to check the voltages on it starting
right from the beginning so we put the
thing back in there we can't check the
voltages yet because there's a couple
fuses missing and my brother took the
fuses with them out - did Michael it
the next thing we're gonna mess with is
the connectors so these connectors you
can see how that's turned brown that's
from heat so these pins inside get all
screwed up so you need to replace these
not all of them we're probably gonna
replace all of them just because we keep
it's easy we've got plenty of Kent pins
but you need to the ones that are marked
so the way you do it is you take a
little screwdriver and there's a little
tab on the back of the pin that if you
kind of bend it in you can pull the wire
right out and then once you get the wire
out you cut it off I don't think I have
the thing here with me you cut it off
and then you crimp a new one on let's
see if I see if these will cut it these
things never quite work right
there we go so we cut the end off strip
a little insulation off
put it just a song
correct the Nuendo on and then slide it
back into place
all right and eventually you'll hear it
kind of pop back into place
and there's a you might not be able to
see it from there but there's a little
tiny pin that kind of a little ramp that
sticks up and once you slide it in that
goes behind this hole and so you can't
pull it back out which is why you have
to bend it with the screwdriver to get
it out so we're gonna replace all of
those and then we have another one that
goes here and then this is actually a
large connector that's broken in half
from the heat and the stress so I'm
gonna see if we have a new housing on
that if it's one like this where it's
just a little burnt you don't have to
replace the housing because it just it's
just a piece of piece of plastic that
holds the pins in place so we're gonna
work on that a little bit and the other
ones any other ones and we'll come back
after that this is the plug that we cut
off there was there was like two
connectors missing and there was a wire
just hanging in there and this is our
new one look at that isn't that sexy Wow
look at that
that's free kind of amazing so we're
gonna put that where it goes on the
connector here and then whenever I get
my fuses back we'll we'll check the
voltages now through the magic of
YouTube time though that's gonna happen
right now all right so we got the fuses
in and we got our multimeter set up so
the way you check these is you put the
ground on the bottom of this long
resistor on the front here cuz that's
just a ground spot there's other places
too but that's where we always put it
you want to set your meter on DC and
then there are little test points at the
top these little loops so that says test
point one for instance and it's given us
six point four volts that's like the
controlled illumination so that's the
voltage of like the little lights that
it turns on and so you wanted to be five
or a little above so that's at six and
plus there's no load on anything so none
of the bulbs are in none of the board's
are in so it's solvable
you're gonna be a little bit hot so then
we checked the second one and it's at a
hundred and eighty-seven volts that's
the power to the because I've heard of
the solenoid board and makes the power
for the displays and that's fine I think
usually that once you plug it in that
will actually go up so that one's gonna
be up over two hundred probably once we
plug the board's in I don't know why
does that power it's weird and so you go
to this third one and it's at thirteen
point two six that's supposed to be 12
volts or a little bit higher that's the
voltage that runs up the solenoid board
that's not here that turns it into five
volts to make all of the PCBs chips work
alright so the fourth one we're going to
skip because it's actually AC voltage
and then we go to the fifth one and it's
46 volts DC which is the solenoid
voltage and that's about right so we're
gonna put it on AC and so this fourth
test point seven point two four volts so
that's the voltage that makes the
general illumination lights work and as
you can see some of them are actually
own some of them are still working after
all this time so what we figured out is
that it appears to me that all the
voltages are working on the transformer
and the rectifier board and so they're
sending them up to this solenoid board
which is missing so I'm gonna go find
one of those solenoid boards that we can
rebuild and pop in this sucker and get
it doing its thing now on these machines
just so you know you can buy a brand new
rectifier board brand new solenoid board
that's the lamp driver board you can buy
it brand new you can bribe it by the mpu
brand new you can buy the displays brand
new there's probably a sound card too
but I'm not sure but that may be the
only one that you can't buy new but
we're gonna use used on the solenoid
board because their original ones are
pretty reliable so once you rebuild them
so I'm gonna go find one and then we'll
start in on it voila so we had this baby
in a box in the back and so we we tested
all of the transistors all of them are
fine you can see where it's been
repaired three
times in the past see those little smoke
drills so three of these transistors got
smoked at one point everything was fine
the only we this capacitor should be
changed but we don't have it I'm in
right now so we had to order it but
since we're kind of mocking it all up we
figured we'd leave it there's also a
capacitor up here I guess I should have
left that guard off there's a big long
capacitor in the back there that has to
do with the displays sometimes you have
a problem with that too and then for a
modification there's all these little
test points on here and so there's a
test point three test point one test
point five all this stuff
there's this thing there's one wire that
kind of goes to the backward but anyway
whenever you if you tie a test point
three two test point one if you put a
jumper wire between one and three that
kind of makes a connection a little bit
better on the womb there's one wire that
it only goes to one of those so there's
like just a little a couple little minor
mods like that that people do on these
you can find all that archived online
you can go to pin wiki or go to pin
repair comm they talked about it but so
there's a couple little mods you do just
to make the ground connections a little
better and we did that but we have to
wait for this cap so we're gonna be
taking the thing back out anyway we
don't even have it screwed in right now
so once once the 12 volts comes off the
rectifier board up to the top here on
those two that you tie together test
point one and test point three if you
check those with a multimeter you should
have five volts or a little bit more and
we do so that part's fine and when your
high voltage there's two test points
behind this plastic shield one of them
is the raw voltage coming in which is
like 230 volts something like that and
then the other one is the 180 volts that
it's supposed to be sent to the displays
so what a lot of people will do is if
you you can adjust it with this
knob that's under here and you you can
adjust it down to where you're only
getting like 170 or something like that
the displays if the voltage is a little
lower they're not quite as bright but
you don't really notice it and the
displays will have the glass when the
displays will last longer so we've got
all that set up and now all the voltages
are correct so now basically this board
with this is making 5 volts which it is
sending out of one of these wires over
to this connector that goes on our MPU
so we've got a brand new mpu that we're
going to put in now before if you do put
a new one in or a rebuilt one in or
whatever one thing you have to look at
is this connector that we were just
talking about tends to get a lot of
corrosion on it
so the original boards had a battery
mounted on the bottom of them and that
battery will start leaking alkaline and
it will eat up the bottom of the board
and it'll eventually spread into these
connectors so if you're gonna do this
you need to look at this connector and
see if the pins inside of this connector
look corroded also the one that goes
right here sometimes gets corroded so
sometimes you have to replace those pins
if you don't replace the pins basically
what will happen is the voltages from
the solenoid board won't be getting onto
the mpu board clean and so instead of
having 5 volts on the board you might
have 4 volts or whatever and so you'll
get problems where it resets etc etc etc
and also if the pins are corroded you
don't want to plug them into your brand
new nice board because they could go
back and start corroding the brand new
board just from the corrosion on the
pins so we've got our solenoid board in
there the voltage is same fine so we're
gonna put the mpu board in next and see
what we get ok so we ordered a brand new
board for this one because we don't have
we've got the original one but it's all
acid added up alkaline up it's not
really acid I guess it's alkaline
alkaline up so we bought a brand new one
these are about two hundred bucks
they're real reliable made by all tech
systems you can get them anywhere you
can get pinball stuff
the ultimate mpu board and so basically
you have to
it comes with this manual that tells you
how to set it up to be whatever game it
is so there's a little switch down here
on the bottom game select switch and
depending on how you set that it plays
whatever rules for a valley or stern
that that game needs and then if you put
the first switch up it makes it free
play on the valley games so we have done
that and then once you do that you have
to set up these switches here these are
the dip switches like on the original
mpu which is all of the game options so
if you look in the manual it tells you
all of the switch options now if you've
got the original board you can just set
all those like it is in the original
board and then sometimes in the actual
cabinet it's still got the paperwork
inside the back box that tells you what
all the switches do so once you get that
all set up you can mount it in the
cabinets we're going to do that next and
by the way we got our little capacitor
in that we were waiting for so we're all
good to go now
but we're gonna pop this in and see what
we get so we're all mounted up I didn't
have to repin this connector because it
still looked fine it didn't look like
any of the corrosion had ever got over
to it so I suppose we're good or any of
the other connectors sometimes this one
will be real bad too you just look at
the pins in the thing and see if they
look really bad if they look bad replace
them if they don't do like I did leave
them original you know we're trying to
be all original here so we're gonna turn
it on and there is a light over here on
the regular MP users of LED but on this
one it has some LEDs right here the
federal focus MP you self test over
voltage and the +5 so the bottom one
should be one and the top one should
blink seven like a quick flash and then
seven more and then if everything's
alright it should boot up so the bottom
ones on one two three four five six
seven so on this one a quick flash
wasn't really all like a quick flash it
was a regular flash and then it plays
the little tune and now it's doing its
thing and if you'll remember we only
have one display in it and so it's
showing you the last score and then the
high score which is the same because
nobody's ever played it and then on the
play field that we haven't really done
yet of course you're getting all kinds
of lights twinkling and doing their
thing so basically the game is up and
running so the next thing we're going to
do is we're going to get some more
displays working because we're a little
short but it appears that we've got
everything in the back box working now
sometimes if you've got a soundboard you
have to do some work on it and this
one's still working good so we're not
really going to mess with it but
sometimes you need to replace the caps
on it and it sounded like it was playing
the little tune I don't know if there
might be something missing or whatever
but once we get the game up and playing
we can check that again so we might have
to come back in and do the do something
on the sound board but it sounds like
it's working right now oh and also the
we haven't done the the light board so
this board of course runs all the lights
so we can't really mess with it yet
because the playfield is still in
shambles so we don't know if all the
lights are working or if there's a
problem on that board at the very least
we'll take it off and resolder the
connections on the back of the
connectors but we're up and running so
we'll we'll grab some displays and test
out some of them alright so we pulled
out a bunch of displays that we had in a
box that somebody had given us and
started looking through them and some of
them just there's no way we can use like
this one so that's what happens when the
voltage is too high it burns the display
and on these on the Bally's a lot of
times whenever the the high voltage
section goes bad all it does is it makes
the high voltage spike so it does stuff
like that and so this one similar thing
going on now on this one see how the two
right ones are a different color and
then the the second and the third one
are that's because it was in the ball
and credit display because it only uses
four of the things so this one here was
never turned on and the fourth one was
never turned on but you can't really put
that in a nice game like Star Trek
that won't work people and then we've
got this one which isn't quite as bad it
might actually light up decent but you
can see how it's discolored and stuff so
some of the digits probably won't be as
bright and then we've got this one which
is alright but you see how the same
things going on the fifth and sixth one
and the second and the third one or a
different color so it was probably also
a ball on display one but what you could
do is put that back in the ball and the
ball and what is it ball and credit
barley credit this play you can put that
back in it and probably look alright but
there's a little bit of a burn mark on
that second one send a little dot so
that might not light up that great
either then we've got this one which
that last one looks a little a little
weird but it may be usable we've got
this one which is actually from astern
but they work just the same and it's in
pretty good shape so it looks good
and we've got this one which looks fun
but if you look real close to that ship
now there's a bump on the top of the
chip that's cuz the chip exploded so
they definitely needs a replacement and
then this one looks pretty good all over
everything looks good
looks pretty clean actually so what
we're gonna do is we're gonna take some
of these that look like they might be
usable and just pop them in there and
see if they can come up and kind of
halfway work if they halfway work then
we'll rebuild them and make them more
reliable
okay so we popped in some of those
random displays just so you can see some
of the stuff that they do if you look at
this one you can see how that digit
number to part of its missing because
it's burnt you look at this one you can
see that it we've got some random stuff
popping up on number four this one looks
pretty good so far this one down here
has got all kinds of weird stuff going
on and this one looks pretty good but
that's six digits a little burnt all
right so we're gonna put it on the test
and watch it do its crazy stuff
all right so this one digit two's
missing other ones are kind of ghosting
this first one looks pretty good but you
got something going on there underneath
the second digit this one digit number
four is clearly just locked on which is
messing up all the other ones this one's
all ranks if that last digit doesn't
look all that great and this one is
pretty good except that one segment is
burnt so bad that it doesn't even show
up sometimes so basically we got a bunch
of screwed up displays so we're gonna
work through them a little bit and see
if we can figure out how many we have
that are even savable and then we'll try
to scrounge up some other ones okay so I
pulled one of them back out this is the
one that the fourth digit was kind of
locked on so I figured I'd just show you
it's like an overview of them and how
you can fix any of them just kind of
what you need to look at so first you
need to inspect the glass and see if
there's any like really bad burn spots
so you know we had those ones that had
the little dots on it
basically if the glass is burned you
keep there's nothing you can do about it
you can put a new glass on it but that
cost as much as buying like an LED one
so you might as well just buy a brand
new LED one and then you don't have a
problem so you can if you want it all
original you can buy a replacement glass
but literally they're like 50 bucks now
and it's a big pain in the butt to
replace you have to resolder all these
pins
that's if it's got like a physical thing
where you can see that something's bad
sometimes too you'll see that they're
cracked like if you look at the back you
can see where the the pins go inside of
it it'll be the glass will be correct
again useless if it's like that
sometimes too you'll have one and it'll
it'll look fine but whenever you put it
in you'll see like little sparks or
something going on in places I think one
of those was actually doing it usually
that means the glass has a leak in it or
it's about to go out or there's some
kind of short inside and same thing you
can't fix it basically that's like a
sealed there's two pieces of glass stuck
together and are kind of glued together
there's no way to seal it once I mean
one no way to fix it once it gets a
crack in it so the connectors here are a
big source of problems so if you've got
some you need to resolder all the pins
on the bottom someone has done these at
one point mmm a lot of times you'll see
like a big like a circle around one of
the pins it's a cold solder joint so
it's the wire that's connected to the
pin isn't actually connecting to the
board because of that circle around the
pin so this one had the fourth digit was
much brighter than the other digits
that's because the fourth digit was
basically locked on so if you if you get
one and a digits like the one you need
to look at and as your signal comes in
through here right here and then it goes
through r1 r3 r5 r7 r9 + r11 on these
six digit ones so these these three
resistors here and these three resistors
here if they they will burn up so
they'll go from a hundred ohm I think
it's a hundred ohm let me check it real
quick I don't see a thing
it's either 100 ohm or
hundred K you'll have to check but the
these will I think think it's a hundred
oh but these will burn up and go higher
than that if they do you'll lose one of
the digits so if you if you get one that
one of the digits is missing check those
six resistors and they correspond I
believe it's from left to right from the
back anyway they correspond with the six
digits of course and then the signal to
turn on the the digits comes from comes
through these six transistors here and
those are let me see if there I can read
it I'm not close enough to read it
anyway
you can read it it's on there so these
six transistors this is the most digit I
guess you could call the ones digit tens
digit hundreds thousands ten thousands
hundred thousands so they go through
here and then they go up to this the
right behind the window and then go
through another six transistors so again
this is this digit this is this digit
this is this digit this is this digit
this is this digit and this is this
digit so if you just general electronic
stuff if you're if you're not aware
anything that is a like a passive device
like a resistor usually you don't have
too much trouble with now I just
mentioned that these burn up but if
you're looking for a problem like this
where the things on too bright or
whatever it usually it's not gonna be
something passive it's gonna be
something that has action to it so it's
like a transistor and then the only
other thing really on the board that's
like that is this chip this chip does
the segment's so you don't have to worry
about that but if you since we've got
the fourth digit screwed up it's going
to be either this transistor here or
it's going to be that transistor there
it's like 95 percent
it's either that or than that and you
can test them with a multimeter whenever
you've got something like this where all
six of these transistors are the same
you can use a multimeter and check
between the legs with like your diode
test which is the same as the transistor
test and check it with this one and see
if they're the same that should be
fairly similar one of these is gonna be
shorted on in some way that the other
ones aren't shorted along if it's not
that one then that'll be this one
instead of those now if you get a
problem with a segment so if you get a
segment completely missing they don't
run through the same type of resistor
that burns up like the digits do they
run through these seven transistors and
each one corresponds different segments
on the actual number so you've got the
bottom one that's one you've got the
middle one that's two you've got the top
one that's three you've got the top left
one is for the one below it's five six
seven so we've got seven possible
segments so if you have a segment now
whenever you get it whenever you get a
segment problem
it'll you'll see it on all of them so
like all seven of them will have a
segment missing and you'll see weird
stuff like it's supposed to have like
all you know of course you can see at
the best in an eight because all the
segments light up it's supposed to have
all eights but the middle segment will
be missing on all of them so it says
zero instead or something like that if
it's if you see that your problem is
probably the transistor related to it
now if you get just gibberish where
everything's crazy or only a few of the
segments are missing if you look close
you might be able to see the like a
break in the glass or something which
means your glass too screwed up you need
to throw it away or if it's gibberish
where it just looks like instead of
having all eights it's got four eight
three five two four or something is
weird it's probably this segment decoder
here so it gets us it gets several
signals and then tells these transistors
what to do is it does it what do they
call it strobes through so if you're
getting all kinds of gibberish you're
probably the this decoder chip if one
segment is missing
on every digit it's gonna be one of
those seven transistors
if one digit is missing it's probably
one of those six resistors and if one
digit is locked on really brightly it's
probably one of these six that the
corresponding transistor back here or up
there now if your digit is missing and
it's not the resistor it could also be
one of the transistors so the six
resistors and then these if the
corresponding transistor back here and
the corresponding transistor up there
make it work it also uses you know some
resistors and stuff that usually you
don't have any problem with any of those
at least in this design if if nothing's
working like it's all screwed up it may
be this diode here but not very often or
it may be this cap but not very often so
that's kind of what you're looking at
you've also got test points here a
ground test point the +5 test point and
then this one is the high voltage test
point so on these I was talking about it
earlier the high voltage can it can be
up there like 240 volts or something
like that just if the high voltage
section of the solenoid board you go
that's bad a lot of times it'll short to
where it's just on full bore but if it's
properly working you should be able to
adjust it down with that little
potentiometer on the on the solenoid
driver board that we were looking at in
the high voltage section and so on this
machine is at 180 so you can sometimes
put it down to even like 170 the lower
you put it the longer that displays the
less but the problem is if you go to 170
you might get problems where stuff's
flickering a little bit and stuff so we
leave it a little bit high well it's not
really high I think originally it was
designed to be ran at like 190 but we
leave a lot of people say said it at 170
but we've had problems with that in the
past so we put him on like 180 which is
a little high for some people but I
think Factory they were supposed to be
at 190 or something like them so that's
that so we're gonna work this one and
see if we get that fourth digit to not
be so bright and then work through a few
of the other ones and we'll shoot a
little video once we get them all in and
doing their thing
alright folks we work through all the
displays and got several of them to work
and up in the machine we've got one here
that we're gonna replace with another
one just because that annoying dot but
basically we've walked through all the
electronic stuff we can't play it yet
because we have to fix the Pinto yeah
play field we've got everything stripped
off of it we have to do a lot of artwork
but I think we'll end the video here
until next time we'll do another video
on repairing that play field and getting
it up and running but that'll be part
two of the series we're bringing this
damn Star Trek back people so we'll
we'll see you on the next one give us a
thumbs up for taking the trouble to film
all this for you and leave us a comment
below tell us what you think and if you
have any any tips that we didn't go over
here go ahead and leave them below for
the for other people we're trying to
help people save these things there's
only so many of them left right so we'll
see you next week on installment 2 where
we'll be doing a lot of cosmetic stuff
so if you like that make sure and stay
tuned but hit the subscribe button leave
us a comment below make sure to give us
a thumbs up because that spreads us
around YouTube and all that kind of
stuff you know and we'll see you on the
next video