One of the ways you can support our channel, is by checking out the items we promote on Amazon. If you purchase any of these items, or even follow the link, it pays us a commission. Even if you purchase other products after following the link it pays us a commission.
At the moment, we'd like to show you this beautiful Weller soldering iron that we use every day in our videos. The Weller adjustable temperature irons work better than cheaper ones because they attempt to keep the tip at a certain temperature, and are a higher wattage. This helps you get nice solder joints and makes it easy to do repairs.
These links below are to this product in various areas of the world, thanks for watching!
Check Out Our Patreon Account, for Unreleased Repair FAILS, Concise Repair Tips Not Possible In This Long Form Video, And 1 on 1 Repair Assistance with YOUR Project!
Our store is located at 139 Caldwell St., Rock Hill, SC 29730.
AI Generated·May contain errors
Ladies and gentlemen, this is Joe's Classic Video Games back with another cool pinball repair video
for you this evening. This is a Sonic Mars Trek pinball machine we've been working on. This was
actually made by Sonic, of course, a Spanish company. Made in Spain. You don't see these too
often. And we've been working on it a little bit. We did two videos on it. One, we set it up and
kind of figured out what was going on. It wouldn't even turn on. Had some issues. And then the
second video, we worked through trying to get the thing to play.
And we actually did get it to play. Let's see if it'll play some more.
Got the score reels to kind of reset. It was kicking the ball out.
Okay. So I think maybe I've got the switch misadjusted in the out hole. But basically,
we're up and playing, but it has lots of issues. So we're going to try to fix a lot of those issues
today. We got the scoring working on the last video, kind of. Ball in play two. Obviously,
it's sitting very flat because it doesn't have the legs on it. Ball in play three.
Let's see if it'll end the game. So a lot of the stuff that we normally
go through and service on these. Game over. There you go. A lot of the things that we normally go
through and service on these, we haven't done yet because we were kind of trying to illustrate
the schematics and things like that. We have the original schematics here for it.
So we worked on the score motors. Someone had taken that apart. We worked on the player unit
in the back. We worked on the score relays and the score reset relays. We worked on the game
relay. We worked on the tilt relay. And that's about all that we've messed with so far. So in
this video, we're going to go through a bunch more of it and just see how far we can get.
Now we've been having an issue with the bonus unit. Sometimes it'll sit there and it'll count
down and just keep counting and keep counting and keep counting and keep counting and keep
counting. And then sometimes it'll kick the ball out. And sometimes it sounds like it's
resetting the bonus unit a hundred times. So I think maybe we'll look at that first. It's
said in the schematics seem to have a lot to do with that as well. So we're going to check those
out first and then we'll go from there. So here is the bonus unit hanging off the side. It's a
lot like a Valley bonus unit and a Williams bonus unit. I mean, they're pretty, they're all pretty
similar by this point. This game was made in 1977. We have a 1975 Captain Fantastic Valley
Captain Fantastic over here. It's very similar. But essentially when the ball lands in the out
hole, it starts counting this down. And so let me move it up a little bit. So this pulls in
and it decrements like one position off of the bonus. And then at the same time it scores
whatever that bonus is. And then it does it again. And then it does it again and it scores whatever
the bonus is. And that little bar keeps moving. Well, eventually you can see that it's not
quite resetting very well, right? When it gets down far enough, theoretically that little bar
there should allow that switch to open. We're having issues. Look at the grease too. Basically
it should open this switch when it gets to zero and it should transfer this switch when it gets
to zero from connected here to connected there, right? But as you just saw, whenever I mess with
it, it doesn't really move clearly. It moves up pretty clearly. One, two, see it didn't go down
that time. Didn't go down that time. So that's our problem. It's having trouble resetting.
So that would explain why it's been because it's trying to get back to zero and it can't
quite get there. So let's work on this a little bit. The first thing that we need to do is clean
these switches, clean this switch, but we need to take this little spider off this side. So I'm
going to remove that. That's a 10 millimeter nut. We figured out on the previous video,
we're working on the player unit because it's made in Spain. So it's actually
in metric, which in the United States, usually stuff is in SAE, but we get some stuff in metric,
depending on how old it is usually. So we'll take that off and then clean those switches.
And then we may have to remove that shaft too, to clean it up. Okay. So I removed it and I'm
going to go ahead and take this out. I've unwound the spring here that was wrapped around three
times, right? So when you just take it loose and count how many times it's wrapped around,
so you can put it back how it goes, but to move this out, this switch stack is in the way.
Sometimes you can take one of these screws loose and just rotate this out of the way and get that
out. So we'll do that. I think it's probably clean enough, but we'll take it all the way apart just
since this bonus unit is actually very integral to the entire game. When the ball lands in the
out hole, every single time this bonus unit has to count down and open that switch, or it will
not kick the ball out. So we need to make sure that's all working really good. So we might as
well take it all the way. I had to take it all the way off because the way this bracket is made,
it wouldn't pivot. That's fine. And so this just slides out once you do that. Now notice that spot
right there. That looks real ugly, doesn't it? I believe it's made like that though. It's just
made like that so that when it gets to a certain point, it can't go any farther because a bonus
unit only has so many bonuses. So you can't get 50,000 points. You can only get 15,000 or whatever
it is. So when it gets to a certain point, they have the teeth missing so that whenever this goes
to ratchet, it can't go any farther. So that's all fine. So let's take this and check it out.
We'll clean it up. I will say that it doesn't fit in there very good. It's a little, it's not happy.
So that's part of the reason it wasn't spinning right. So we'll clean this up. We'll clean that up
and that should get us spinning a lot better. So as you can see, this thing is actually like a fiber
part. Now it would just be 3D printed or something if they could 3D print those threads on there.
I guess you could 3D print it and if you couldn't do the threads, you could just cut the threads
after it was 3D printed. But yeah, this whole thing is plastic and the United, the American
ones would have been metal. But I mean, it's held up pretty well. I don't see any problems with it
other than the tooth thing. But like I said, I think it's designed that way. Maybe one of them
missing there or something, but I think it'll be just fine. Yeah. So I'm just going to clean this
up. Now, normally you put oil or grease on things, but in this instance, you don't need to do that
because it's, you put, basically you put oil and grease where there's metal on metal. This is not
metal, so it doesn't need it. I've heard that sometimes the pieces that are made of nylon
in some of the valleys and stuff like that, that if you put oil on them, it will actually make the
oil swell, the nylon swell up, which gives you more problems where it won't rotate right.
So we don't want to do that. And if you look to see that little lip there, that is why we're
having problems putting it back in. That lip won't be an issue once it's reinstalled, but once
when you're trying to pull it out, that gets hung because it's just a little thicker right there.
I don't know if it was designed like that or not. It doesn't seem to be there, does it?
Yeah, look, it's, it's not designed like that. Okay. So you see right there, there is no lip
and I am, I can't really point to it. I'm looking right here. There is no lip, but if you rotate it,
there is a lip. So that's causing problems. I think I'll file that down just to make that more
smooth. I'm going to clean it up. I'll file that down and then we'll clean up the shaft that's in
there. Like I said, I don't think that was causing a problem because it would have stuck all the way
through and been on the front side. It wouldn't have been the part that was rotating, but we'll,
we'll fix it up just in case. Okay. So I just hit it with this rasp and it got rid of most of it.
I'll hit the bottom just a little bit more. It's still there a little bit. There's one little spot,
but that'll make it easier to put back in. Okay. So I've got it back in, wrapped the spring back
around three times and hooked it three times and hooked it. Now you may be, you may be tempted to
make it four times because, Oh, then it'll go back. And you know, we were having problems with
the resetting. If you do that, then you're fighting against these springs because they
have to pull in to push it the other way. So there's kind of a balance to it. And each one's
a little different, but on this one, it was wrapped around three times. I put it right back
like that. So to move it up, we pull in this one, it'll go 10 positions. I might've just made it go
another one by messing with it, but it'll go like 10 positions. And so if we go back two, three,
four, five, six, seven, eight, nine, top switch 10. So that is all the way home.
So at the home position, this one should be open and this one should be open and this one should
be closed. And that's where we're at. We need to clean that up, but we'll look at that again
after we mess with the spider. So the spider I took off and it goes on this side, obviously.
So we need to clean up those rivets. And then I put a little bit of grease on them. I put
synthetic grease on it. We're looking for super glue. This helps with the problem that,
so it's moving perfectly right now, but when the spider's on there, you have to drag all
those fingers across these rivets. And so that creates friction. The friction from it
can cause you problems where it doesn't always want to move. A little bit of super lube makes
it where it moves just fine. If you get some, get dielectric. You do not want it to be conductive.
If it's conductive, it'll short all of those pads together whenever you put it on the unit.
And it will still conduct whenever the little contacts are touching the contacts there. So
it'll be fine. Some of the companies use that. I can't, we haven't cleaned this one yet, but let's
see. I can't tell that there was ever any on this one. You see the black dirt on those top ones.
That could be the remnants of something like that, but it's, you know, it also could just be
dirt that the contacts picked up over the years. So I'm going to clean those up with a little bit
of fine sandpaper, get them nice and shiny. And then I'm going to put this super lube on it,
which will help keep them from oxidizing in the future and will help that spider slide on that.
And so it should move easily one way or the other as it does its thing. Okay. So I cleaned them up,
put a little bit of super lube on it. Now I want to show you something about the spider. So on like
this particular one, what happens if you forget which way the spider goes on? It can go two
different ways. See that elongated hole? So it can go on that shaft either this way or the other way.
Well, if we were to put it on this way, and I've kind of roughly got it on there where it goes.
If you look, see how that lines up with that rivet? So that looks right. And this one lines up
with that rivet. That looks right. And this one lines up with that rivet. That looks right. But
this one, it's going to be in a weird spot. This one doesn't really line up with that rivet,
maybe a little bit. This one's in nowhere land. This one's at the end of, or in the middle of this
thing. So it just, if the stuff's lining up in the middle, it's probably not how it's supposed to be.
So if you were to turn it around the other way, and you can look on the schematics to confirm it,
you know, if you turn around this way. So now we've got this one starting at the beginning of
this, this one starting at the beginning of this, this one starting at the beginning of this,
this one starting at the beginning of this, this one starting at the beginning of this,
and this one starting at the beginning of this. The only strange ones is this little one does
start at the beginning of this, but there is one kind of in the middle there, right?
This one will be up here. So there is one that's kind of in the middle.
Okay. So that's what the spider back on. So let's try stepping it up and seeing how it moves. Now,
notice we're on the first position of everything, except that weird one in the middle on the first
position of everything. And so as it goes, and we're right in the middle of each contact,
we're still right in the middle. That one might be a little bit off, but if you look closely at it,
since it's a rounded contact, it's nowhere near touching that other contact. It just looks like
it is. Maybe we'll tweak that one a little bit. What do you think? Are you down with some tweakage?
It's a little harder to tweak the small ones. So let's look a little closer. So this one is a little
bit too far. That one's a little bit too far. That one's pretty good. This one's actually behind.
So we could turn this a little bit. I hate to pull on it too much with the play field up in
the air, but we could, if we turn this disc just slightly, it'll line up better with them.
But if we do that, we're going to throw some of these other ones off a little bit. The longer
ones though, you can bend a little bit to get them more centered. I tweaked it a little bit. It's
still, that one's a little bit forward. I just barely moved it, and I've straightened this one
out a little bit. They're all pretty much centered. They don't have to be exact, but it's something
you want to pay attention to. See, this one's a little bit behind, but I think it will work like
that. Okay, so we've gotten to the end of that where that tooth is missing. It won't go any
farther. But the problem we were having when it was going the other way, right? So let's try that.
9, 8, 7, 6, 5, 4, 3, 2, so it's zero. It should have opened the switches.
We haven't messed with these yet, but so that one's definitely open. That one's definitely
open, and then that top one's definitely closed. So if we go the other way, whoa,
and that one's definitely closed. That one's closed, and that top one's open. So that's
correct. We probably just need to clean those, but I think we've got it. I think we've got it now.
I saw Chubby Checker say that one time on PBS in the 80s after doing a concert. I thought it
was really cool. My dad told me it was because he was trying to talk like the Beatles. I don't
know if any of that's true. That's just what I was told. Okay, so if you want this super lube,
if you like this stuff, go get it on our website. You can get it at hardware stores and stuff, but
if you want to get it from us, go to lionsarcade.com, and we've got a parts page at the
top of our website with a bunch of parts on it, stuff that we use in our videos. There's about
30 things on there right now, and if you click one of those, it takes you to Amazon, and you
can buy this on Amazon. Now, let's say you don't want this, and instead, you want to buy a one
piece. Is that what that's called? Japanese, anime, whatever that's called, manga, whatever.
It's Japanese. You want to buy that book bag that's on Amazon. Well, if you had clicked our
link to our super lube and then decided, I don't think so, and you looked that up and buy that
instead, we still get a tip for sending you there, so we appreciate everybody that's been doing that.
It's one of the ways that people support our channel. Thank you very much. I would call this
bonus unit rebuilt after I clean those switches, and then we'll turn it on and see what that does,
and it would be interesting to see if that makes all of the lights work for the bonus,
and it'll be interesting to see if that fixes the problem where the ball wouldn't kick out sometimes.
So here are the schematics. This is what I was going to show you about that one that's in the
middle. I can't tell where it goes, but so this is the bonus unit here, and it shows a little line,
you know, one connection that can move to any of these things as it moves. One of those just
turns on the light depending on what area of the bonus ladder you're at. So that's one of them,
and if you come over here, here is another bonus unit, and notice on this one it shows that there's
two pins being connected together. So that's two of the little arms, and notice they both start at
the front and then work through. Okay, so that's one set, and then here is another set. Starts at
bottom and works through, and here's another set. Starts at the bottom and works through.
So I assumed that, and you know what that means, I assumed that that's what this was doing. That it
was connecting two contacts, and one of them just happened to be in the middle of the disc,
but it doesn't look like that. I don't know. It looks like just one arm does it,
but this one is probably where that issue is. You can't go above 10,000 or 100,000 on this one. On
a lot of the bonus units, it can actually go 15 positions, but on this one you can only go 10. So
I don't know why they've got it quite wired that way, but that's the way they've got it,
and since all the other ones line up on the first rivet, that seems appropriate. Now,
the little switch that we were just looking at, we messed around with on the previous video
because of this. When the ball lands in the out hole, the hole switch, it turns on the bonus
relay. The bonus relay, when it's turned on, then starts resetting the bonus unit, and each time it
goes one position, the score motor's turning and it scores 1,000 points because the bonus relay
is wired through some scoring. So if it's on, you get 1,000 points or 10,000 points. I'm sorry. So
each time it clicks down, you get 10,000 points and it just keeps going and keeps going. Well,
eventually, it gets to where it opens up that one switch. When it does that,
it kills the bonus relay. And then there's also that switch that goes back and forth,
the one that opens and encloses the other way. Well, when it gets down to zero, it goes this way
and that connects to the out hole reset relay. And somewhere the out hole relay, when it pulls
in and then these turn, blah, blah, blah, blah, it kicks the ball out. So that has to do with
kicking the ball out. It has to do with, at the end of each ball, it has to count the bonus all
the way down to zero till that switch opens and the other one closes, or it can't kick the ball
out. So that's the area that we're looking in and making sure that we're trying to get all of that
working properly so that it always kicks the ball out and it always counts the relay 10 times
instead of counting it 15 times. It's got a little bit of a buzzer going on. That's the
lock relay probably. Okay. So let's see if one, if it's still got credits and then two,
if the bonus seems to act a little better. Okay. The ball kicked right out and our 1,000 light is
lit. This says advanced bonus and get 5,000. I hit the wrong one. I hit the advanced bonus one.
Advanced bonus and get 5,000 points. We did. Let's try it again. Very nice.
And it is giving us 5,000 each time. That light's probably burnt out. 60, 70,
80, 90. Light's probably burnt out. 100,000 points. Okay. And that gave us 50,000 points.
I advanced the bonus, I thought nine times because I hit that other one,
but maybe we had scored some other way or whatever. I don't know. Maybe it gave us 5,000
points too. Let's see if I hit it, if it gives us 5,000 points. No, that gave us 10,000 points.
Whatever folks, I think that's working right. So let's see if the ball, when it drains,
gives us our 100,000. Now notice it says it's in ball and play number two.
We haven't rebuilt the ball, the balls played or the ball and play unit. That's next. But let's
see if this is going to score properly for us. There's a bunch of stuff still we haven't cleaned,
so who knows. So 100,000 points, we should have 160,000 points.
Very smooth. Very smooth. And we're back to 10,000. So I think that fixed a lot of our bonus
problems. If you watched the previous videos, when it came on, it would just go, go, go, go,
go, go, go, go, go, go. And I got a million points because I'm the best ever to play this
as long as the bonus unit is stuck. Okay. So this is the ball count unit.
That may be, but I think this is. This is the ball count unit. Let's see if it won't reset back
to one very easily. Now we're keeping in mind earlier it was on one, but maybe there's something
going on with it. These stepper units are always a problem in any game basically. That's ball two,
I would suppose, ball three. That's as far as it'll go. Oh yeah. Yep. So there's our problem.
Okay. So I'll show you from the other side. Is this only a three ball game? What's going on with
that? Look at that. So look what happens when I reset the stepper unit. So that's going up.
So you see the issue, right? So it just doesn't want to move back to where it needs to go. So
that just needs cleaned the same way. And the super lube will help with that. Let's see if
I can figure out for sure if that's the ball count unit or the coin unit. Okay. I believe
it is the ball count unit. If you look here, it's only shown twice in the schematics. In one place,
it shows it here. And this little wiper is connected to the neutral, the yellow wire.
And it can move to just a few little spots. One, two, three, four, five, there's six locations.
And then it also shows it down here where the lights are. So there's one, two, three, four,
five, six locations. So if you get to the sixth one, apparently that would throw it in game over.
And see how the little wiper is again, attached to neutral. So neutral can actually be the body
of it. If you look on the frame of that, there's going to be a wire connected to the body somewhere
and that whole frame is basically connected to the neutral. So on the coin unit, it's actually
shown on here other a few times. So for instance, it's right here, but you see when it shows at that
time, it shows that there's two wipers moving between two contacts. So this one that I was
saying was the ball count unit only had two fingers on it. So if that was the only place
the coin unit was used, it could be the coin unit, but then it's also used here. And if you see,
see how it has three wipers drawn. So basically there are one, two, three, four wipers on the
coin unit. And the ball count unit just has two wipers that are both connected together.
So that's the coin unit. It actually has 10 wipers. So we must've missed one on the schematic.
And then this ball count unit just has the two. Okay. So somewhere there should be a wire,
like I said, attached to ground. Maybe let's see if that's true.
Maybe there's a wire on the frame. Possibly. Yep. It's under here. You can't see it, but there's a,
there is a wire connected to ground under there. I think. Let me see. No, I'm wrong. There's a
third leg that attaches to this little trace here that connects to that yellow wire. So that ground
connects to this and connects to that. So that's one of them is going to do the, one of them is
going to like actually keep the thing to go into game over at the proper time. And then the other
one is just going to light up the light. So, but anyway, we need to clean that and get it working
just as well. Okay. So I cleaned it up, put a little bit of the super lube on it. Now ball two,
I guess, ball three, ball four, ball five, game over. If it's set to five ball. If it's set to
three ball, it'll be game over when it starts ball four or something to that effect. Okay.
So it reset very well. So what I like to do, so it's resetting from ball five. Perfect. But if
you think about it, it's a little farther along. It's a little easier to do that than to reset from
like ball two or whatever that is. So I always check to make sure it can reset from every position.
Sometimes you'll get one that's just sluggish. It's messing up. This one's working great now.
So we'll leave it like that. So whenever we start the game, we'll see if it resets all the way back
to one. Okay. So we need to do the coin unit too. Exact same thing. These are all called stepper
units. And you just, if they don't step right, things aren't going to work right. So ball count
unit, coin unit, bonus unit, which isn't on every game, but most games, player unit. We did this the
other day and you saw it's still nice and shiny because of the super lube. Match unit, sometimes
called the zero to nine or the zero to 90 unit. And then the, this is kind of a stepper, but
there's no disc. Right. And you know, this is called the credit unit or the replay unit, depending
on what company made it. Okay. So, but this, if this doesn't work, you'll have problems with the
match. And some of the features won't work that have to do with like moving the lights around on
the play field. The credit unit, basically you just need these switches to work here on the side
and the player unit we did last time. But the coin unit that we're going to mess with next,
you need, because it helps basically two things. It helps keep track of how many
players that are in the game. So like if you have a three player game,
it knows the score on three different score reels. And then the other thing that it does is it helps
the ball count unit step up. So if this is messed up and this is messed up, instead of playing a
one player game, when you play a one player game, instead of going to ball two in the one player
game, it will go to ball one of the second player or ball one of the third player, ball one of the
fourth player. So this can cause all kinds of problems with not getting the balls counted
right and not getting the players counted right. So that's basically the main thing that controls
that. It has to do with the amount of coins that you put in it. So I'm going to clean it up, same
exact thing, and we'll need that to test multiplayer. Okay, so same thing. Resets now. Two, three,
four player, one player, two player, one player, three player, one player. All right, all of that's
good. We'll leave it all the way up to again too. Okay, so that stepper unit's good. That stepper
unit's good. This stepper unit is good. This stepper unit is good. Let's clean this one just
for the heck of it while we're doing the other ones. Okay, so that's how it looks cleaned up
and with a little bit of super lube on it. And on this one, since it only has one coil, it just
moves in one direction. Okay, so it doesn't really matter where you put the spider because it's just
if it's in the wrong spot, it would move around to the correct spot, but really there is no wrong
spot because it just keeps going. And you just want to make sure that each time it can move one
spot and all that. Now, notice how there's 10 different legs on it. So that's a lot more than
what we usually see. But if you look down here, none of these have any wires on them. So they've
probably got these daisy chained up here, or maybe they're just using a few of them up here
and these ones don't do anything until they get around to where they touch something that connects.
Let's look on the schematic and we can see sometimes they use this to do something interesting,
like to move the lights on the play field or something like that. And usually what triggers
it is when you score like a hundred points. Well, in this game, there's two fake score
reels with each one. So a hundred points is the smallest denomination of points that you can make.
Well, each time you score a hundred points, we'll look in the schematics to confirm,
it will move this up one place. The reason they do that is for the match,
because they don't want you being able to tell what number will match. At the end of the game,
it will light up 100, 400, 800, 200, 700, 600, 500, 300. Did I forget any? It'll light up one
of the numbers. And if your score matches that at the end of your score, you win a free game.
But because you can win a free game, if you could figure out what the match number is,
you could just lose the ball when the score was at that, and that would be fine. Some people still
figured out how to do that. But because this moves a little bit, each time you score a hundred points
or maybe even a thousand points to keep it random, or maybe both, you never know what match it's on
whenever the game ends. So that's one thing that it does, but let's see if there's anything else
on the schematics that it shows us that it's using this for. So here's the match unit. You
see that one of the little wipers is just going to be to light up the correct light. So at the
end of the game, it says 300 or 400 or 200 or whatever. And notice too that it's drawn it
out of order. 600, 100, 700, 300, 800, 200, 500, 900, 400, 0. And the reason that they do that
is so that let's say that your last game ended at 600 points and you had 600 points. Well,
if you did two more, let's say you scored 200 points in the next game, not counting the thousands
and 10,000 that you scored, it would move to here and that one would be 800 points and your score
would be 800 points. And you would match again and you would just keep matching. It would be all
lined up. So they stagger them so that it lands different. It's not random, but it's kind of
random. It's pseudo random, which is good enough in most places. So that's one thing it's used for.
And then here is where it actually does the math as I call it. So whenever the game is over,
wherever the players are, wherever their reels are, if it lines up with the match unit, it ends
up, if the match is turned on, it ends up connecting over here and blah, blah, blah, blah,
blah. And somewhere or another you win a free game. So it's just a really complex circuit that
wins you a free game. And then over here, you've got the same thing, the match unit.
So two of the little things as the game plays and it moves through, it's going to connect.
So there it's connected to this line, there it's disconnected, there it's connecting to this line,
there it's disconnected. So on and off, it's going to connect and disconnect the number one
alternator relay and the number two alternator relay. So alternator relays are used to do what
I was saying, to move the lights from one side of the play field to the other. So down here,
if you look at the light bulbs, here's one example. It's a switch on the alternator relay
that is going to light up either the right spinning light or the left spinning light.
And it might say 10,000 when lit or something like that. And then here's another one. So this
alternator relay switch will either light up the center bumper light or the left special
rollover light. And it'll just, it'll wig wag some of those lights. Either these will be on or these
will be on depending on where that switch is. And then it also needs that same switch or that same
relay to make all of the scoring work. So you might have over here somewhere, like if you see
the hundred point relay, there may be something somewhere. Yeah. So there, if this switch is hit
or the bonus unit, whatever, if it's hit, if the alternator relay is this way, you win a hundred
points. If it's this way, you get a thousand points. So they need those relays to make stuff
go back and forth. So this one says alternate, alternator relay one and alternator relay two.
That's probably because they've got a whole bunch of different lights moving back and forth. So they
need several to go back and forth. So they needed more switches than they could fit on one relay.
So let me see if I can find those two relays and we'll just see how many switches are on. So there's
a bunch of stuff on the bottom of the play field. There's this huge relay bank here of stuff that
you can trip. I haven't even looked into what that is yet. And here is alternator relay one and two.
So you can see that all of the switches are making break switches. They're either one way or the
other. So for instance, that one, if it's not energized, it's that way. If it's energized,
it's that way. So left, right, left, right. And it's just all these different switches. One, two,
three, four, five different ones there. And you can see that the nature of the way they're doing
it, since they're making break switches, they've got big long blades on them. So they didn't want
to put more beside it. They've already got five there. So they did another one here for three
more. They've got eight different ones on two different relays. These are those nice, big,
long blades that are easy to adjust that Williams used a lot. These ones are the smaller ones.
They're not quite as fun. They can also do make and break switches on those, but
not quite as fun. Okay. So let's play it back down and just see if the thing is going to work.
And let's see if the lights are zigzagging across the field. I think they already were.
And let's see if it resets back to one player. We'll try making like a two-player game maybe.
And then we'll see if it resets back to ball number one, all of that. Okay. So let's see if
she'll act a little better now. So the click was probably the bonus unit going back to zero.
Game over. You can see that 700 is lit. That's one of our match numbers. Now, if I turn that
match unit, it should change that. So 100, 600. You see how they're not in order. Zero,
400, 900, a burnout one, 200, another burnout one, 300, 700, 100. Right? So that's cool.
And you can see that we are on four players because that's where we left it. And we left
the ball and play at like five. Okay. So the, look, we're finally getting a credit on the
display. The one to four can play reset to one. The ball and play reset to one. So let's try
playing a two-player game and see if it'll let us. Okay. So that seems like, oh, nope, nothing
happened. But I think, don't both of these light up? So maybe that bulb is just burnt out. Hmm.
Well, let's try another one. That would be three. Maybe it's not lit up either.
Nope. It's not working. We haven't got that working yet. Okay. So on the schematics,
whenever we showed this before, basically, whenever you hit the start button,
it pulls in the credit relay. The credit relay pulls in the number three coin relay.
And then the number three coin relay connects right here. Okay. So whenever we do that,
we're hitting start. And what's happening is the credit unit is resetting. It's taking away
one credit from us. Okay. So we know that this switch, this switch on the score motor,
you hear the score motor turn, as it's come back to its home position, that's that score motor
turning. And then you hear the click because it's taking, it's decrementing a credit from us,
right? It's probably also making the play meter work, but the coin unit is not stepping up
or it appears that way because of the light bulbs. So for that to happen, this reset relay
has to be in that position where it's, the game is not in reset. Now, when we hit start,
when the game is in reset, the reset relay comes in, I guess it connects over to here
and it resets the coin unit. Now that's the one that we're trying to fix right now.
It turns off the game over by, by latching it in the open position.
And it resets the ball count unit. Now we know that it's doing that because at the beginning
of the game, while it was resetting, it reset the coin unit back to one player. It reset the
ball unit back to the first ball. So we know this switch is working, but we only know that this side
is working. If that was connected back to there and clean, it should be stepping up the coin unit
and putting us on a two player game. So we have yet to clean the reset relay because we're doing
this the hard way. We're going through piece by piece trying to fix it. So the reset relay is next.
We need to find that connection. So it's a blue wire that splits into two different connections.
One is orange and blue, and one is white and blue on the reset. So there is the white and blue wire
going to the step up coil on the coin unit. Let's confirm that it's still in the home position.
It is. It's still in the first position. It never stepped up.
And then this is the reset relay. And this switch set right here, the one on the end,
is white and blue, orange and blue, with a blue or I guess whatever that is in the middle. So
that's what makes it go back and forth. Is that a jumper? Is that what they're doing there?
I can't tell. But anyway, that appears to be the one. Well it is connected,
but it doesn't look very clean. So you can see when it pulls in, it would touch over to
the orange and blue side. And that seems to be working when it resets. But then when it goes
back, since it's connected here, that should be enough to get that to step up. But it could just
be it's filthy. So we'll try cleaning it. I'll double check all the wire colors, and then we'll
try again. Okay, so let's try it again. Ball in play one. One player. It's on the first player.
Game over, turned off. Hey, there we go. That's more like it. All right, now let's see if at the
end of the ball, it steps up to player two. This is so cool. Okay, so it should go to player two.
It did. So it's doing that because the ball count unit is working properly,
and the coin unit is working properly. So at the end of this one, it can't go to player three.
It needs to go to player one again. All right, so if the coin unit wasn't working right,
and those traces were dirty, it would have just went to player three.
But what it did was it said, hey, and it turned on the ball count unit and turned it up one.
This game is really flat right now because we, they've got that wrong too. This game is really
flat because we don't have the legs for it. So it's a little more flat than it should be.
This shouldn't be like this. See how the ball can actually hit the bulb?
Right? So this should either have a side to it like this, or it should have a long ring to it
so that when it goes down through, it hits the ring. Since this one has a side, this probably
should have had a side as well. I just did the same thing. So that relay bank over there that
I was saying, I didn't know what it was for. It must be for all these letters. You're trying to
All right. And we're in ball two. Everything's cool.
Now, obviously there's all kinds of stuff still not working properly. We're just testing as we
go through. Let's go to player one. Went to player one and ball number three. This is the last player
one ball because it's set on three ball. By the way, you have to score something or it will just
spit the ball back out. Player two, ball three, this should be our last ball.
All right. So rebuilding the bonus unit, got it counting the bonus accurately each time
and counting it down and then kicking the ball out each time. We don't have that problem where
the ball was getting stuck anymore. Rebuilding the ball and play unit, made it where the balls
count properly and always go back to one at the beginning instead of two where it was getting
stuck. You saw how sluggish it was. Rebuilding the coin unit, got it where you can play more
than a one player game and that it keeps track of how many players are playing accurately instead
of giving extra players. And sometimes you'll get, it'll play three players and then one,
it'll play two balls on one and then it'll play four players and just all kinds of problems.
That's coin unit problems usually. And then the bonus unit that we were messing with in the back,
did we even see that doing its thing? Was it doing the wig wag? Yeah, it is. Okay.
So the R when lit, T when lit, the 1,000 when lit, all of that will change as we score
a hundred points or whatever. Oh, it's not a hundred. It's when it's used for a thousand.
Okay. What scores a thousand? So that gave us the R, that gave us the 10. We're not really
seeing them wig wag, are we? That was the one thing we didn't check. What actually makes the
match unit move? Very interesting. So it's right on the tear, so it's a little harder to see.
There's the match unit. And what actually makes it move is a switch on the score motor.
So every time the score motor turns, that's what makes the lights move around. So a lot of times
if you hit a switch, it doesn't actually move the score motor. You just score the points. If
it's a hundred points or a thousand points, it doesn't have to move the score motor. So every
time the score motor revolves though, that is going to move. And if we, what was our obvious
one here? One of the obvious ones was the R spinning light and the L spinning light. So the
two spinner lights moving back and forth. But those are only on when the bonus unit is all the way up.
Anyway. So what makes the alternator go back and forth ultimately is the score motor turning,
not the hundred point relay like I thought. So that would make it even harder to try to guess
what the match is going to be. Even if you memorize the match number, the sequence that it was in,
you'd have to keep track of how many times the score motor turned on and how many times did
it turn at the beginning of the game before it kicked the ball out. And how many times did it
turn when it was counting down the bonus after the first ball, et cetera. Did it do it in one
revolution or did it do two revolutions, et cetera, et cetera. So that's an interesting
way to do it. I think I have seen that before on some of them, but I don't remember which companies
did that. So if we score a point, the score motor doesn't have to turn. So the alternator
relay stays where it is. But if the score motor has to turn, like whenever we score 5,000 points,
because it has to turn and go one, two, three, four, five, then it does wig wag the alternator
relay. Very cool. So maybe we can tell up here too. I can't reach it. I can't reach it.
You'll have to be my eyes. Which one is it? I can't possibly reach that. You're just not
going to see it, folks. Okay. I acquiesce. Now you can see it moving. But when we score points,
it doesn't move. All right, folks. So there you go. That's us working through all the stepper
units and showing the significance of them and how they all work. I hope you enjoyed it. Like
I said, this is a lot like a valley. Let me show you. We got all kinds of stuff in here right now,
but we have a Captain Fantastic 1975 Captain Fantastic. That's the ball count unit in the
same spot as it is in that one. That's the coin unit in the same spot as it is in that one.
That's the bonus unit hanging under the play field, just like it is in that one.
This is the match unit on the valleys of this era. They're a little bit different,
but that's the match unit. That's the player unit and that's the credit unit.
So on this particular one, to make the alternator relay work that we were just looking at, it has
this little switch right here. And so as it turns, it opens and closes that switch, which turns on
and off the alternator relay. But it's basically the same idea. That's how Sonic chose to do it.
And you know what? A lot of these imported games, they're actually imported in the United States
because they literally were built in Spain. Get a bad rep, but I love them. There's nothing wrong
with this game. This is just as nice as a Bally or a Williams or a Gottlieb. It just comes down
to do you like the gameplay? And we haven't played it yet, but it looks to me like it's going to be
awesome. I love this little horseshoe spinner unit here. That's awesome. It's got a nice,
interesting layout. I think it's going to be a great little game. And the thing that they have
over all of the American games is the play field stays perfect. That play field has zero wear.
It's as nice as the day it left the factory because they put some kind of coating on them.
You can see the reflection there. Somebody was saying, I was trying to figure out the word for
it in the previous video. And they said that it was resin. Yeah, it's like almost got like a resin
look to it. It's really thick clear coat. Somebody else said that it was a really thick 3M clear,
maybe whatever, whatever they did, it worked great. And the back glass is in perfect shape,
not a scratch on it anywhere. So to be fair, the ballet back glasses of that period also hold up
really good. That Captain Fantastic is also in perfect shape. And you could argue the Captain
Fantastic back glass is a lot nicer, but this one, it looks great. So they look great. In my opinion,
they're just as easy to work on as the other ones. And then you're going to end up having a game
nobody else has. So I don't know why these don't get, I don't understand why these aren't worth
more money than some of the more common valleys and stuff. So that'll do it for today. We'll do
another video on this one and try to button it all up. I still have to clean everything in it.
I'm not just going to hunt every little problem that's with it, but it's kind of fun to do the
videos like that sometimes. So you can see problems get solved. If I go through and just
clean all the switches, clean all the relays, a lot of times just about everything works. So I
don't have as much to talk about. And you do know, I love to talk. So I'll see you on the next video,
leave your comments below. What do you think about these Sonic games? I think they're great.