One of the ways you can support our channel, is by checking out the items we promote on Amazon. If you purchase any of these items, or even follow the link, it pays us a commission. Even if you purchase other products after following the link it pays us a commission.
At the moment, we'd like to show you this beautiful Weller soldering iron that we use every day in our videos. The Weller adjustable temperature irons work better than cheaper ones because they attempt to keep the tip at a certain temperature, and are a higher wattage. This helps you get nice solder joints and makes it easy to do repairs.
These links below are to this product in various areas of the world, thanks for watching!
Check Out Our Patreon Account, for Unreleased Repair FAILS, Concise Repair Tips Not Possible In This Long Form Video, And 1 on 1 Repair Assistance with YOUR Project!
Our store is located at 139 Caldwell St., Rock Hill, SC 29730.
AI Generated·May contain errors
Ladies and gentlemen, this is Joe's Classic Video Games
back with another cool pinball repair video
for you this evening.
We are working on this Captain Fantastic.
We did a video where we kind of showed
the condition that it was in.
The cabinet is a little rough on it.
And it looked like some mice had been in it,
but we worked through it a little bit.
Had some coil burning up problems, things like that.
And we did another video where we fixed some of that stuff,
figured out some of what was going on.
We still haven't got it completely playable yet,
but we were having some scoring issues
and decided that it was time to redo the play field.
So the first thing we're gonna do
is take everything off the play field.
And we're gonna clean it with a magic eraser
and some Windex, actually, soapy water.
And then whenever we're done with that,
we're gonna do a little bit of touch up for it.
So sit back, relax, and you can see us
remove most of the stuff from the play field,
get it cleaned up a little bit, and then we will paint it.
This is what we ended up with.
It's missing the lens.
The main problems that it has
is there's just some minor wear here,
but the blue is pretty bad.
For whatever reason, the blue has flaked away
all over the machine.
And I guess it's really several of the colors,
like there's some on the red here as well.
But the blue is what you see because it's on everything.
Yeah, it's kind of unfortunate.
I might try to do something about that.
There's a technique you can use to fix that
called the smear technique.
So you just take a blue paint that's similar to that,
acrylic paint, put it on the blue,
and then kind of rub it around.
And basically, you're going to clean off all of the blue
that's not in one of those little pock marks
that appears as white.
And it would just leave the blue
only in the part that's messed up.
So we'll attempt that a little bit and just see if it works.
We got to get this and this looking good.
I'm not going to try to make it look perfect.
I talked with the customer whenever they dropped it off.
They're not expecting it to look perfect or anything.
We've worked on one of their games before.
I can't remember which one it was though,
but I'm not going to try to touch up every color on this
because basically you would have to repaint
the whole play field.
But I am going to try to get this a little better
since you look at it so much
and I think it would be fairly simple.
And then we'll see if we can do anything about that blue
to make it look a little better.
But I wouldn't expect any miracles here.
We're not going to turn this into a 10.
I would say it's so evenly worn.
It's kind of interesting how it's just evenly,
it's like the whole play field
has just distressed a little bit,
but there isn't heavy wear anywhere
except for where this flipper drug
and this one insert here
looked like it was catching the ball pretty good.
But other than that, there's not heavy wear.
It's just regular wear from the thing
being played a lot over time.
You can keep it from doing that by waxing it.
But what happens is people just kind of neglect them
a lot of times over the years.
So the operator maybe didn't keep this one
as clean as he should have
and it started wearing down the play field.
Maybe they had an old, rusty pinball on it
or something too.
But we'll see what we can do.
So the first thing, like I said,
I'm most interested in this.
So I think the first thing I'm going to do,
I've got these little black ink markers
that are acrylic black paint
that you can just write with.
They're like a pen, not Sharpies.
You can't do that and you need something acrylic
because whenever you clear coat over it,
the clear coat sometimes doesn't like the catalyst
that's in some of the Sharpies and stuff like that
and you'll get all kinds of problems.
Basically, when you spray the clear on it,
it'll make it run and just ruin it.
But if you use acrylic paint,
you can clear over it really easily.
Acrylic's really easy to mix.
It's also really easy to clean up.
So that's what we do.
So let me grab some of those
and I'm just going to mark back in some of the missing lines
which should make it where you can see obviously
what's missing and what needs attention.
And we'll go from there.
Okay, so I inked the black back in
which makes it look much better just by doing that.
It hides a lot of the wear just putting the lines back.
And you can see, I didn't do it perfect.
I am incapable of perfection.
I am unimpressed by perfection
and I do not desire perfection.
And I've talked to the customer,
they don't either, so it's all right.
These are the pens we use.
Posca.
And I try to get the finest one I can get.
This one's a 0.7 millimeter.
I don't know how much finer you can get it.
These are made by Mitsubishi.
It's a Japanese ink and it's made in France, I believe.
These are pretty cheap though.
They sound expensive, it's not that expensive.
And we use them on all kinds of pinballs.
Like I said, they're really good
because you can clear over them.
But remember everywhere you use these,
you have to clear over it
because it'll wear off, it's water-based.
So I didn't go crazy with it.
So I re-inked the bonus ladder
which means I'm going to have to clear over that.
And I re-inked here,
which means we're gonna have to clear over that.
You don't wanna do the, like I said,
you don't wanna do the whole play field
unless you're gonna take everything off
and use a nice automotive clear coat or something like that.
We're not gonna do all that.
We literally just use spray paint clear coat.
But yeah, so it drew most of it back in.
We still gotta add in a little bit of color.
Like there's a little bit of teal missing
that would make it look a lot better if we did that.
There's a little bit of yellow missing
that would make it look a lot better if we did that.
A little bit of red missing.
So there's still stuff to do
but the most concerning thing to me is this blue.
I'm gonna try a little bit up there at the top
and see if I can get my smear technique on point tonight.
If I can make it happen,
we ought to be able to make this thing look a lot better.
So let me go grab some blues.
We'll find one that's real close
and see if I can get anywhere near that color.
So the way I do it is
I get all these little cheap acrylic paints.
This is Americana brand.
It's pretty good.
You can get this at Michael's.
It may also be at Hobby Lobby.
I think it is.
These are like a dollar a bottle or something like that.
And I just get a whole bunch of different colors.
What I do is like if I'm running out of blue
or if I run out of a particular one that I use all the time,
I'll go to the store
and I'll get like seven or eight blues while I'm there.
And then that'll get my blue selection up pretty good.
And then, you know, this is wet paint
because it's inside of this tube or this bottle.
And the bottle is also like a clear plastic,
but it's like a kind of a little bit cloudy.
And so the color that you're looking at
is a little bit lighter than it will actually dry.
So they dry slightly darker than they look like this.
Some people make paint swatches and stuff too.
This is just how I do it.
That's not the right shade.
That's more like a baby blue.
This is ocean blue.
Okay, this one, a little closer,
but it's a little, it ain't quite right.
That's bright blue.
Maybe it's too bright.
This one, too dark.
Ultra blue deep.
Now, if you are going to air one way or the other,
you want it to be darker than lighter.
Your mind doesn't notice dark imperfections
as much as it notices light imperfections.
So whenever you look at this blue,
if there are some little darker spots in it,
you won't really notice that.
If there are lighter spots in it,
you notice every one of them.
It's just how it is.
So if you can't perfectly match the paint,
and usually you can't,
you want it to be just slightly darker
as opposed to slightly lighter.
So this one would be good if you didn't have anything else.
We got this one.
This is like, you can tell it's a completely different shade.
This has a little more green in it.
It just has a greener look.
Some people have a good eye for that.
Some people don't.
If you think about a color wheel and then you think,
so it's blue and then to,
what's the best way to put that?
You've got red,
but if you look at a color wheel, you'll figure it out.
But basically this is more towards
the green area of the color.
So that's not good.
Then we've got this one.
It's another one that's kind of weird looking.
It's kind of purple almost.
It's really bright.
So this one is ultramarine blue.
So that gets us down to these three.
So we've got this one.
To me, that's just a little too light.
It is gonna dry darker,
but I think it won't be dark enough.
So that's sapphire.
That gets us down to these two.
Okay.
To my naked eye, that one is just a little off.
The shade's not quite right.
And that's true blue, they're calling it.
That's number two.
Then this one might be a little bit too dark maybe.
And that is vivid blue.
Did we already look at vivid blue?
I don't think we did.
It sounds familiar.
No, I don't have a vivid blue.
So what I'm gonna do is I'm gonna try a little vivid blue
in one area,
and I'm gonna try a little true blue in another area,
and we'll see which one we like the best.
Okay, so this is how you do it.
You see all the white.
Now notice that is not a perfect color match.
So if you left it like that, no bueno.
No bueno.
But we're not gonna leave it like that.
We wanna wipe it off.
And when you wipe it off,
you get all of the blue off of the top
or make it thin enough that basically
it's not that big of an issue,
but it leaves all of the blue in the little white specks.
Problem solved.
Okay, so I've done about half of it.
You can see the difference there.
And tell me what you think.
Now remember, I haven't put the clear coat on it yet.
And yeah, the true blue was just too light.
So it was vivid blue all the way.
And again, I'm not looking for perfection.
So I'm not gonna do every color
and I'm not gonna do every little single dot
that needs to be blue.
Like I was saying at the play field,
just kind of look evenly worn.
We're bringing that wear back up a little bit.
We're not trying to get it perfect or anything.
I think people waste so much time on that.
Just get it looking better.
I haven't done much down here,
but I think that looks a lot better so far
just by touching up the dark blue.
And I'm not gonna go in, like I said,
and touch up the lighter colors
because it's just not as obvious.
Like you can't see,
especially since they've got like the whole sparkles
and stars and stuff everywhere.
Anyway, I mean, do you really notice
that there's little white specks on some of the red?
I don't think it's that important.
And then up here, you can see the teal
has some of it as well.
On the yellow, there's a little bit,
but you can't hardly see it.
It's mainly this blue.
So we get it looking better.
The rest of it might even look like it's designed that way.
So here's what I got out of that.
It came out pretty good.
It'll look a lot better once there's a clear coat on it.
I think that is just what it needed
to make it look much more presentable.
So I think it's much nicer now.
I think if it was a, I don't know,
maybe a five before, it's a seven now.
So I think we were able to lift it two points by doing that.
And that's about as good as I can get it.
I can't get it too much better than that.
But I am gonna touch up a little bit of the ladder here.
I'm not gonna go crazy with the red dots.
Like I said, I'm gonna leave that.
And the worst part that was affected by the blue
that we haven't done anything with
is this over here where it says special when lit.
That just doesn't look all that great,
but I'm not gonna go too crazy with that.
I might re-ink the black line around the arrow,
make it look a little better.
So yeah, so I'm gonna paint in a little bit of red,
a little bit of yellow, a little bit of teal,
and a little bit of like a cream color,
and then run with it.
I'm not gonna, I'm just gonna get the thing
that matches the closest and run with it.
I'm not gonna try to mix too much of it
and get it all perfect or anything.
Because there's so much going on there too,
and it's so minor, you're not even gonna notice
small differences in the actual shade.
So let me see what I can do with that,
and we'll go from there.
This is where I am after touching up the bonus ladder.
Very presentable in my opinion.
And I'm gonna put some clear on it.
Like I said, we just use rattle can clear.
Everybody always wants to know
what's the big secret to that.
I just don't like showing that
because you can't do it
on just a little portion of the play field.
If you just, let's say you just touch up this spot
and then you spray clear coat on it,
it's going to fish eye
because there's wax all over the play field,
or oil all over the play field,
or dirt all over the play field,
or grease all over the play field.
You can't paint over that.
But what did we just do?
How come we can do it?
It's because we just took the whole play field apart
and cleaned the whole play field with a magic eraser.
Remember that?
So a magic eraser is basically like sandpaper.
You're essentially sanding the play field.
So everything that was on the top of the play field
is gone.
All of that wax, all the oil, or you hope it is.
I've still had issues whenever I have a big area.
If I paint it, I'll still see some little stuff,
little, they call it orange peel or fish eyes.
If there's a spot on the play field with oil on it,
paint won't stick to that,
which is why you have to use acrylic paints.
There are some oil-based paints you can use,
but it's kind of, you got to know which ones are which.
So if you tested it all out,
you could probably figure it out.
But I just like using acrylic
because it's really easy to work with.
It's really easy to paint over.
So yeah, so that's what we got.
So I'm going to clear coat it, most of it.
I'm not going to take anything else off the play field.
So I'm going to use a satin clear, which kind of blends in.
It makes it look kind of like it originally looked.
You can use gloss if you want,
but you will see every little imperfection in the thing.
And we're going to make it glossy anyway
whenever we wax it, right?
So I use satin.
It blends in with kind of the original finish
in any places that didn't get completely redone
and all of that.
And it just works well for me, so.
And again, we're not aiming for perfection here.
This isn't perfect by any means.
It's way down the line from perfect.
You could get it perfect if you did it yourself
and just took forever and just painted each little part,
took every little thing off the play field.
But you got to remember, I'm charging a guy to do this
and he doesn't want to pay me 25 hours
when I'm kind of subpar at art anyway, right?
If I was Leonardo da Vinci, okay,
go ahead and pay me my 25 hour rate
and I'm sure it'll look great.
But you know, it would take a long time
to get this thing perfect in every way.
We were able to bring the worn area of the play field
up a couple levels in just a couple hours.
So it's inexpensive.
We can do it while we're just taking a play field apart.
Doesn't take a ton of time.
Get the machine in here and back out to the customer
where they're happy with it.
And it looks much more presentable.
There's also the thing where,
when you start staring at every little part of it,
you notice every little thing.
Like, look at this little scratch.
Oh, there's a scratch there.
Oh, it's horrible.
Oh God, look how bad that is, right?
You're not even gonna notice that if you're playing it.
You know, who the hell cares about a little scratch?
It doesn't, people get so picky about these
that it really makes everything unfun.
So if you're like that, do your own machine,
but this is about as good as I'm capable of doing.
So I'm gonna clear it,
and then we'll have Joey put everything back together
and wax it.
And the whole point of us doing this
at this point in the repair
was we were having some scoring problems.
So when I returned on the game,
the thousand point relay locked on,
the 10 point relay locked on
on both the first and the second player.
So we just having some kind of issues.
Why would it do that?
Well, if one of these switches is stuck closed
from the old rubber rings,
it could do something like that.
So we needed to service the play field,
get it where we know it's all good,
and then we can go from there.
All right, folks, it's viewer mail time.
Today's viewer mail comes from Ryan
in Pinckney, Pinckney, Pinckney, P-I-N-C-K-N-E-Y.
So it can be knee at the end and pink at the beginning.
So Pinckney, Michigan, I think.
Is it Michigan?
M-I, is that Michigan?
Or is M-G Michigan?
I've never seen a M-G.
It must be Michigan.
All right.
Well, he has sent us a little letter.
I don't want to dox anybody,
but you can't read his last name.
Hi, Ronnie.
Well, hello.
Thank you so much for taking the time
to help me with my game plan,
Sharpshooter 2 solenoid issues.
Like I said in the Patreon chat,
you nailed it with diagnosing the bad 74154 chip
on the solenoid driver board.
So if you don't know, we have a Patreon account
down below all of our videos.
You can click it and you don't have to do this,
but if you want to, where you can follow us on Patreon.
And then if you've got any kind of problems
with your machines, if you send us a message on Patreon,
we try to help you out and give you at least our advice
if we can't figure out exactly what's going on with it,
at least give you our advice.
So this gentleman had a game plan, Sharpshooter 2,
and the problem he had was whenever he turned the thing on,
all of the coils would fire and then release,
and then it played fine.
But it was a little scary.
You know, like you turn it on, boom, boom,
and then everything plays fine.
So it's just enough to like make you think,
that ain't right, it's not supposed to do that.
I've heard of the Gottlieb games doing that
if they have problems with grounds and stuff.
So he said it was, you know, it was a game plan.
Now I have never actually owned a game plan.
Well, I own a couple of them, but I haven't fixed them.
And so I've looked into it a little bit.
And if you don't know, the game plan machines
were a lesser known manufacturer
that made maybe 10 games or something like that.
And they had a little board, a CPU board,
and everything was just completely different
than other systems, very different.
And it had a battery right in the middle of the board.
So if that battery rots, and they all do,
it destroys the CPU.
So I've got a couple of them.
The reason I've never messed with them
is because the CPUs are all screwed up.
And I've got some replacement CPUs.
We're gonna do it one of these days.
We just haven't done it.
I think both of the ones I have are cocktail tables.
So they're not all that super impressive anyway.
So yeah, so his was doing that.
So I looked at the schematics
and he had done a bunch of things already.
And Clay had mentioned that there's a cap,
clay at pinrepair.com,
had mentioned that there's a capacitor that goes bad.
And if that goes bad, that you can have solenoid problems,
you can have lamp problems, blah, blah, blah.
So I kind of looked in the circuit
at what he was talking about.
And there's an area there where it creates
basically the data and the address lines
that make the whole thing function
start narrowing off where they only go to the solenoids.
So I looked at it a little bit and kind of figured it out.
And I was telling him, well, it could be this,
or it could be once it gets on the solenoid driver board,
it goes through this big decoder chip called a 74154.
It could be that one is starting at a weird level
where it's locking everything on and then starting to work.
So he swapped that chip and got it working.
I wanted to send you something
because I truly appreciate your effort and help.
After watching years of your videos,
I know you are particular about tools, as am I.
So I hope you like these Tekton spring hooks.
I use my set all the time.
When trying to finagle a spring back on a drop target
without taking the entire assembly apart
or disassembly, reassembling score reels
and or stepper units.
They are made right up here in Michigan
and with USA sourced materials.
I like the way he's talking.
You can't find many tools anymore
that can make those two claims.
That's true.
A lot of them are made in USA,
but they don't have USA sourced materials.
So I hope you find them as helpful as I do.
Thanks again.
Yeah, I'm starting to be a tool snob.
I like the ones made in USA
and I like the ones made in Germany.
Oh yeah, look at this.
So this is a set, I think I've showed you before.
This is a set I bought a couple of weeks ago.
Eklund, and it's all made in USA.
All they make is like small screwdrivers
and Allen wrenches, security bits, stuff like that.
Ooh, it's got a little case.
Look at that.
Oh look, it came from Tekton as well.
All right, let's see what we got here.
Ooh, yeah, these are pretty nice.
You know what else these are good for?
This would work on old clocks as well
or whenever I'm putting the,
now you kind of had to push them though.
Maybe, but whenever you put a clock back together,
you've got all these gears in between the two plates
and there's a pinion sticking through the top plate
and the bottom plate.
And so you got to put like 10 of them
or 12, 15 of them in the plates all at one time.
So what happens is you kind of get one in place
and then another one in place
and then you put a couple of screws,
a couple of the nuts on
and then all of the other ones aren't right.
So the gears are in there all crooked
and they're not in their little pivot
that they're supposed to be in.
So you can use something like this
to reach in there and pull it a little bit
to get it to pop into its hole
that it's supposed to be in.
So yeah, that's pretty cool.
Wow, I mean, I've never even seen this.
This is pretty sweet.
Pointy one.
Yeah, these are very nicely made.
I can tell.
Tecton, that's a, ooh.
Yeah, I've never had that one.
Yeah, I could see where these would be very useful
for putting springs back where they go.
That is very cool.
That's a heck of a case for them too, isn't it?
All right, well, Ryan, I really appreciate that.
We will put them to good use
and I'm happy that you got your Sharpshooter II
back working right.
Now, back to your regularly scheduled video.
This is how it ended up looking after Joey got done
cleaning, waxing, new rubber rings, all of that.
We still need to work on the drop targets,
clean them up, and I think we're gonna put
new pop bumper caps on it.
But it's very presentable now, I think.
I just think it looks much better.
Okay, so I'm gonna go ahead and start a game
and show you what it's been doing.
It's got a, the ball is in it.
Basically, we haven't done anything
with the score reels yet.
So if they reset, we've got a problem
where the 1,000's locked on and the 10's locked on
on two different players.
So let's see if it does that again.
If it does, I'm just gonna turn it off.
It did not do that again.
All right, so it's probably something on the play field.
Okay, let's just see if we can get it to score anything.
It does say player one.
Okay, the chimes are not working,
or that particular chime is not working.
1,000's is, though.
That's interesting.
So it's supposed to be 300 points,
but it's doing 200 and then 300 and 200 and then 300.
But that did fix our scoring,
our scoring issue where something was locked on.
That one's also scoring 300.
Maybe that's supposed to be lit.
We haven't done the light bulbs yet.
Okay, yeah, so we're looking pretty good scoring-wise.
Of course, like I said, we need to rework all that still.
All right.
Okay, so yeah, so our scoring issues
were actually the play field.
So there was broken rubbers and probably switches
that were misadjusted and all of that,
and Joey caught it whenever he went through.
Not sure why it was scoring on player two.
It could be that the player unit hadn't reset or wasn't.
The little blades weren't properly centered.
We could actually fix that a little bit
by rotating this disc.
We worked on this last time.
If we moved that disc a little bit,
it would make it where these went back just a little bit,
maybe to get them where there's no chance
of them touching two at once.
Yeah, so like that one there,
look, that looks like it's probably on two at one point.
So we got a, maybe that's bent or something.
We did a little repair on that on the last video.
Hmm, yeah, that might be just a little bit forward.
Let me see if I can mess it.
Okay, so I just moved the disc just slightly.
Usually, there's just enough play
that you can barely move it.
There's two screws, one there and one over there,
that you can loosen to do it,
but then the problem is the spider's not in place,
so you can't tell if you're right.
And so the point is you want these things
to only be on one connection at a time.
So that one there was a little suspect,
but you can see now it's backed off,
and it's only on the one, okay?
Now, when that steps up, now it'll be on the second one.
And see how we got it kind of like
where it's in the middle?
That's about how you want it.
You don't want it where it's on two at the same time.
You can see there, it's only on one.
Now, it looks like maybe that's touching, it's not.
It's lifted up off of the thing.
The only thing that's touching
is actually the contact on it.
So that would make it second player.
Going back around, we got so many games in here
we're working on that we don't have room.
Let's see if that moved us over to the second player.
All right, so that probably fixed
both of the scoring problems that we had.
The locked on 1,000 point, whatever that was,
maybe that was one of the drop targets or something,
I don't know.
We didn't really clean that,
so I don't know what scores 1,000 on the play field,
but something.
And then the locked on 10 point score reel.
And then the little disc that we just adjusted
probably corrected where we were scoring
on the first player and the second player at the same time.
Of course, like I said, we had already cleaned that.
It just probably wasn't adjusted quite perfect.
All right, so there you go, folks.
Hope you enjoyed that.
Next time we will finish this thing up.
We've still got stuff obviously in the back box to work on.
We haven't cleaned all the score reels yet.
And then I'm sure there will be other problems
like we know that the chimes aren't working quite right
and things like that,
but we will get to those on the next video.
So that should be the last video in this series
on Captain Fantastic.
We will see you then.