Check Out Our Patreon Account, for Unreleased Repair FAILS, Concise Repair Tips Not Possible In This Long Form Video, And 1 on 1 Repair Assistance with YOUR Project!
Thank you to everyone who has been supporting our channel! If you use the link below before you purchase anything on Amazon, we get a royalty for sending you there, thank you!
Our store is located at 139 Caldwell St., Rock Hill, SC 29730.
Ladies and gentlemen, this is Joe's
Classic Video Games back with another
cool pinball repair video for you this
evening. We've been working on this Got
the Broyal Flush pinball machine for a
customer. Very cool game. We haven't
completely got it going yet, but we've
been systematically working through it
while we kind of solve the problems as
we notice what's wrong with it. So, we
did a video where we looked it all over
and we worked in the mech board on the
bottom. Um, in the first video, we got
her up and running. In the second video,
we fixed some other little issues that
were going on along as well as the
player unit in the back. Um, and now we
are up to it's not scoring right. So,
we're going to keep working through it.
We're trying to make the point that
basically you have to clean everything
in the machine if they've been sitting a
while. So, we're kind of trying to
illustrate that. Let me add a credit to
it and we'll
uh see what she wants to do today.
All right. Didn't kick the ball. Did I
not have the ball in there? Yeah, the
ball's not in it. Okay. So, uh, what did
we do with the ball? I think I took it
out because I didn't want it to scratch
the playfield. Got to have
that. All right. So, ball in play one.
Player
one. That is going to have something to
do with that. Uh, it was scoring a
little
bit. Chime. It wasn't working. Hear the
one, two, three, four, five. And then
you heard the was because it rolled over
to a
th00and. Um, but yeah, the some of the
other scoring wasn't doing its
thing. So, a th00and
is the 100 is. What was the
one? We've got score real stuff that's
not quite right.
Um, and this wasn't doing anything. It
says a thousand and special when
lit. So, we just got issues going on
where it's not scoring right. It just it
needs work. So, I think the next thing
that we're going to mess with are the
actual score relays in the back. We
haven't cleaned any of that yet. We
cleaned everything under on the bottom
of the cabinet, but nothing on the
bottom of the playfield yet. We didn't
clean the Jones plugs yet, and we didn't
clean these relays yet, which are the
point relays and the reset relays. Uh,
so I guess that's next. Let's um
h let me do the point relays next and
see if that gets us our
um our chime back. The one chime that's
not working. I didn't even look at the
chime unit yet, so it could just be
something on there. But uh if one of
these switches is misadjusted, it will
also not score the chime whenever the
relay pulls in. So let me look at those
first and see what we can find out.
Okay, so I've cleaned all of the point
relays, the reset relays, which won't
have anything to do with our scoring
issue. And then this re uh relay, the F,
this little stepper unit that's used for
the match. And then there's a couple
switches on there that are used for the
special. I cleaned the Jones plugs where
that plugs in. I cleaned the Jones plug
for where the three ball I cleaned the
Jones plugs where the cabinet plugs in.
And this one where the playfield plugs
in. There's two more down there where
the playfield plugs in. I cleaned all
them, too. So, I've been cleaning some
Jones plugs. It's been about an hour.
So, let's see if messing with those
point relays had anything to do with it
not uh the chime not working. We're
we're just systematically moving through
it and seeing what fixes as we go.
We haven't done this the score reels
themselves
yet. All right. So, let's see if we get
a different deal on our chimes
now. All right. So, you're to but no
chime. The thousand
though, that one works. And then we've
got a a hund a 10 somewhere. I wonder
what that would be. Maybe that's
this.
Okay. So, the 10 is working. The
thousand is working. The 100 just isn't
working. And that hole isn't really
working. You're not scoring the points
that you're supposed to. Okay. So, uh,
let's look at the chime and see if we
can figure out why the 100
chime doesn't chime. So, here's the
chime unit. It actually seems like that
the the plunger is
stuck. See
it? So, it should be down, but
instead it's up there. So, let's see if
it'll just fall down if I mess with
it. Well, that was easy. Wonder if it'll
move now,
though. Good way to get yourself cut.
Oh, here we go with our filmography
award
again. I just can't flick it enough.
Yeah, it got stuck again. Okay, so we're
gonna have to take that apart. All
right, let's do that. Um, I'm going to
go ahead and un connect
disconnect
unconnect the wiring
here. They've probably moved it around
to get the wrong one to chime or
something. Who knows? But this is how
they have it hooked up. So, we'll try to
hook it up like that again whenever we
put it back in. But, let me remove that
from the
game. So, this is Gotlib's beautiful
chime unit.
Very nice little design. It has a
resonator box here that's made out of
plastic. And then it has a plate here
with a couple pieces stamped out of it
that are then bent down to hold the
resonator box. Two
little selftapping screws or whatever
that hold the box in
place. Then there is another
plate. Now you'll notice the the main
plate there too. The end of it is just
bent to create the support that mounts
on the wall of the pinball machine. And
then there's another
plate that
is bent to hold it together. So, it's
really it's just two plates. And if you
look up here, look how just look how
cool this thing is. The way it was
designed, this part is bent to hold the
bars. So, the whole thing is like one
big piece of metal that's been bent like
three or four different ways. And then
the part that holds the bars, if you
look, there is a small
piece that's bent the other
way that holds the other side of the
bar. I dare I say it's a better design
than the Bali. Sorry, I love the Ballet
stuff. You know, I do. I've watch I've
done so many videos about the Ballet
Chime units. This one's a little bit
better because they made it all out of
one piece or two pieces. So, I'm going
to remove this because on this
particular
one, this uh this one plunger is stuck.
The other two aren't. Let me see if I
can do it where you can hear
it. So, one chime's not working. The
other two, see the plungers down
[Music]
there? Um, but this one is in there.
It's just stuck in the middle. Sometimes
that means it was it's overheated. But
if you mess with it, it's still moving
in there. So, it didn't overheat enough
that it burned up the coil. It's just
stuck. It's like physically getting
stuck. Um, so a new sleeve will probably
fix that. So, let me pull off this piece
and then we we can look at at it as
well. So, here's the other piece. So
they have just a bent piece with holes
strategically stamped in
it and then they are just using a
regular like a coil. You know what's I'm
sure that's probably the same part used
on the
flipper to just hold that piece. And
then the pl the
the sleeve has a hip on it. So when it
sticks through the top, it creates its
own little mounting
surface. So they have like just
simplified this design to the point of
beauty. Let's see if that little part is
the exact same as what's on the
flippers. So there's the
flipper and there is the chime. Yeah,
it's the same part. Or if it's not, it's
so close. I mean, it's got to be the
same part, right?
See the
little See the little thing in the
middle there for structural support.
Look, it's the same exact
part. Just a heck of a design. But look
at what an
engineering masterpiece that is. Now, I
realize a lot of stuff was like this,
but just look how well that was done.
And that's one piece of
metal that was stamped. And then these
are bent back in two different locations
so they hold the
resonator. The whole end is built bent
up so that you can use it to mount it on
the wall. And then the top is bent both
forward and backwards so that it holds
the bars. And then they have these
little rivets or posts or whatever you
want to call these in
there. I think they're riveted. Well,
not rivet, but
pressed. And then there's just a little,
you can see there's a couple little
wafer washers in there. And then there
is the rubber grommet that holds the
uh the chime bar in place. And notice
that they're loose. That's true on the
bies, too. You want these to be loose
because that means they ping like
they'll resonate
better. Just what a beautiful design.
It's perfectly designed. You couldn't
make it any simpler than that. Um, but
this wouldn't be super expensive to
reproduce. I wonder if people are doing
it
yet. Um, you really have two
really crazy This one's not even that
extreme. That's a pretty easy bin there,
you would think. This one's a little bit
different. I don't know if that all has
to be done by hand, the the bins, or if
a machine can do it. I guess a machine
can do anything.
um pressing the the posts in would be a
little bit of of a job. Um but it's just
a it's probably about as easy as you can
possibly do it. Just what a wonderful
design. Okay, the one that's stuck uh
there's just the inside of the sleeve
had like some some almost like dirt in
it like um it almost seemed like sand or
something. So, I'm going to clean that
out with a rag, like a fine um paper
towel, and just get where all three of
them are moving through all three of
them. Fine. And that should fix our
problem. Easy
peasy. All right, so we got it back
together. Three plungers. Here we go.
What do you
think? All right. So, it's doing its
thing.
It doesn't sound right because if they
hit it and stop, it doesn't sound the
same.
So,
or you just has to hit it real quick,
right? But what a beautiful
design on the Gotlib 3CH chime chime
unit. All right, folks. I'm back at it.
I got it back in there. Got it wired up.
I did reverse those two wires because as
I read the schematics,
um, the two were switched it seemed
like. So,
um, before the hundreds wasn't working.
I think they had moved the tens to the
hundred. I think it was reversed. So,
but they all should work. So, this is
the thousands. It should be the same as
it
was. Our hundreds should be what the 10
sounded like before.
And our
tens should also This is the one we
haven't heard
yet. Very cool. So I think that's right.
So that's
10, that's hundreds, and that's
thousands. So we got the chimes working.
Very cool. All right. So, in the back
box, all that's left is um the switches
on the the
um replay
uh wheel. That seems to actually be
working fine. And cleaning all of the
score reels. Okay. And uh we still got
scoring issues here though. Like this
isn't acting right. I don't believe says
a thousand in special when
lit. So, we're not getting a,000 points.
Um, so we need to work on the underside
of the playfield. So, let's lift that up
and start messing with that. Maybe we'll
see if we can figure out exactly what
that problem is first. Okay. So, looking
at the schematics, when the ball lands
in the
hole, it pushes this switch down, which
closes that switch. You know, that red
plastic actuator closes that switch. And
all that does is turn on the G relay.
So, the G relay is down here in the
bottom. We've already cleaned it.
the whole
relay. So, the whole relay has several
uh switches on it. One of the switches
ejects the ball. So, the whole relay
pulls in and holds itself on. It starts
the score motor turning. And one of the
switches holds itself on until the score
motor gets to a certain place where a
switch opens, which allows the G relay
to turn on. Another switch on the G
relay
um kicks the ball out at a certain spot.
So, one of the switches is now held on,
and as the score motor turns, it gets to
a certain spot, it kicks the ball out.
Another switch turns on the L uh relay,
which is the thousand point relay. Uh
the L relay, whenever it comes on, it
hits the chime and makes the chime ding
and it gives you a,000 points. So, it's
a very simple circuit. The only thing
involved is that switch, that whole
relay, and then the wiring in between.
So, if you just hit the the G relay
barely enough for it to hold itself
in to start the score
motor and to kick the ball out. You hear
it kicking, right? So, that's what's
going on right now. But, if you hold it
in a little
tougher, there we go.
So, there's a switch on that that's not
quite close enough. That's the whole
problem. So, I'm going to adjust that
one more time. And then that should get
it where our kickout hole scores its
points every time. That is that switch
right there. Turns on the L relay. These
are the original schematics that came
with the game. If you would like a copy
of schematics for your game, the best
place to get them is
pbresource.com. the
pinballresource.com. They are a company
that makes reproduction got pinball
parts and well reproduction parts
period, but they specialize in Gotlib,
but they do Williams Valley, Chicago
coin, all that old stuff. Um, even stuff
like Genco and and
Exhibit. So, uh, if you need pinball
parts, that's a good place to go. Um,
and they they can make you an exact copy
of pretty much any schematic that you
need. They have very few that they don't
have. Okay. But looking on the
schematics, the that works through all
of these switches on the motor. Blah
blah blah blah. Um, and then there is a
bunch of switches up here. 5B, 4B, 6B,
5B,
uh, 4B, and this I relay disc, which is
the bonus unit.
So all of this is because that value in
that hole can change. You you may have
saw that there is a green light that
comes on and a um Oh, I may be wrong
about the 1B, 2B, 3B, 4B. Let me
look. That might be the Yeah, that's the
sequence bank actually. 1B is the green
joker. 2B is the white joker. 3B is the
purple joker. 4B is the two jacks relay.
5B is the two kings relay. 6B is the
three queens relay. 7B is the royal
flush relay. and 8B is the fourth
position bonus unit relay. So all of
that is involved with making that hole
score different amounts of points. So
you can imagine just how incredibly
important this bonus unit relay disc is.
So we're going to clean that next. This
is Gotlib's little mini stepper
unit. And look how they've cheated on
this one. This is only a half stepper.
They're just half stepping.
Look, there's five wires and then
they're repeated by little jumper wires.
So, as this spins, now it's real dirty
right now, so it won't it won't uh be
great, but this wire is connected to
this wire. And then this long thing here
is this ground
here. On the other side of that, you
can't see it, but underneath this little
thing, it's grounded. So, it's grounding
this
wire in this position. And then whenever
it turns one, this wire is connected to
this wire here. So, that wire is now
grounded to the same one because you
again, you can't see, but on the other
side of this, it's connected to this
bottom. Then it moves
again. Same thing, grounded to this one,
which is connected to this one. So,
you're grounding that
wire to this wire. I'm calling it
grounded, but it doesn't have to be a
ground. And on and on and on. So,
usually these are used in like the match
circuit and stuff, and there's 10 of
them, but on this one, they've doubled
them up. That's interesting. So, I guess
they only needed five positions, and
then they just have it repeat for the
rest of it. Instead of trying to use a
completely different mech or something
that only turns five times, they just
reuse this one with a few little jumper
wires. Well, that's pretty cool.
All right. So, we're just going to clean
this up like we uh like we typically do.
This is the I relay, which is actually
the bonus uh
relay in this game. There
is two alternating switches on
it that look like they're backwards for
to to one another. So, the right one is
closed and the left one is
open. And now the left one is closed.
Let me see if I can get
closer. Oh, okay. It's so it can reset.
That's what that's going to be
for. So, open, closed, closed, closed,
closed, open. So, every
sixth step, one, two, three, four, five,
six,
um, it opens. That's they can reset it.
So, since it's used as a bonus unit, um
it's just going to keep click click
click click click click click click
until it opens and then it knows that
it's at whatever the zero position is.
Now, this
side, let's see what it does. See if
it's the more traditional open, close,
open, close. So, it's open right
now. Two, three,
four, close. Yeah,
it's so it's the opposite. So this one
is closed for five positions and then
opens. And this one is open for five
position and then
closes. What a cool design. They could
do anything. And uh since it has less
wires, they only need one Jones plug. So
we did the match unit. I think it was on
the previous video. And uh the match
unit had two plugs. But I like how they
make them where they can be removed from
the uh from the cabinet. So, we're just
going to clean it the way that we
usually do. Uh I'm I actually take this
off. A lot of people uh advise against
doing that because the problem is you
can this board here can move. There's an
adjustment on it. And if you get out of
adjustment, this won't line up right.
And it's not just lining up on the pad.
It's lining up this way, too. So, it's
it's kind of complex. But what I do is I
kind of uh remind myself where it is in
relative to the relative to the the name
on it. So see how it's up above the name
and you can see some of the the line
back here. And I would say it's not even
straight. It's a little bit
crooked. I just remember that and put it
back exactly where it was. Usually
there's kind of like a light stain there
where it was too. And then on this side,
you can see it's a little bit different.
It's a little bit lower on this side.
So, see how it's cutting off the T's?
You can just barely see the bottom of
the second one. But to me, this one
seems Yeah, it's a little crooked, too.
So, anyway, I just do them one at a
time, clean it. I put a little bit of
super lube on it and then go from there.
This super lube dialectric, we use this
on all of the stepper units. um anywhere
that there's metal on
metal. Um but on one of these, you don't
want to go crazy with it. You just want
a little bit, just a little bit because
you don't want this to have to push
through all of that crap. The whole
purpose of it is it's supposed to make
it smoother to to skate around through
it. Um so that you don't have the
friction of the the metal on the metal.
Um so yeah. So, if you want this, you
can get this at a hardware store or you
can order it from our website. Go to
lionsarcade.com. There's a parts page.
And on the parts page, there are a bunch
of links to stuff we use in our videos.
We always show this off because it's
it's not quite as readily available as
some of the other stuff. Uh, and
whenever you click those links, like if
you click this link, it takes you to
Amazon and you can buy it on Amazon.
Now, if you buy anything on Amazon,
after you click the link, it gives us a
tip. So, we appreciate everybody that's
been doing that to support the channel.
Thank you very much. Um, okay. So, I'm
going to clean this up, but let me go
look first and see what these two
switches do. I'm going to say that one
of them is closed until it resets back
to zero. And then this one, it's going
to be something like when it steps the
bonus all the way up, uh, it makes the
special work or something like that.
That's my That's my theory. And this is
the eye relay. All right. So, here is
the eye relay. And one of them is a zero
position relay. So it's just used to
stop the I relay whenever it gets to to
the zero position.
Um which it does with the O
relay, which is the ball return relay.
H. All right. So I guess it'll it'll
keep stepping up until it gets to a
certain spot and then it
stops. Then it won't step up anymore.
But then you also have
this. Now I it will step up some more
because it'll step
up this way through the E- relay. The E-
relay is the bonus score
relay. All right. So then you have this
one. When it gets to the fourth
position, this one
closes and that kicks that drops the 8B
relay. Now, see how there is a normally
closed switch on the 8B coil that is the
same lettering. What that means is this
is a one time
uh coil. So, basically, it's a it's a
it's on a relay bank. Once that
triggers, it will open a switch on
itself where it can't be triggered again
until it's reset. Um, I'll show you that
in the game. So,
8B
is the if I can find it, fourth position
bonus unit relay. Well, that don't help
me much. So, now I got to go figure out
what that
does. All right. All right. So, I looked
through the schematics and that that
fourth position position switch, what it
does is it opens up where the A relay
can't be triggered. And the A relay has
something to do with how the bonus is
counted or something. I don't completely
understand why they would do that, but
we'll figure all that out. And in the
final video of this series, what we're
going to do is uh look at the fairly
complex bonus scoring that this game
does. Royal Flush is known for having a
a kind of interesting rule set.
Essentially, it's like you're playing
cards. You drop certain drop targets and
it does different things. So, it's
pretty cool. So, you know, the drop
targets are card themed. So, there's
jacks and tins and things like that. So,
uh I got this cleaned up. Like I said,
don't whenever you do one of these
little ones, don't put a lot of grease
on it. Um and,
uh the switches I don't usually mess
with. I just clean the the contacts like
we always do. Um, but you just want to
get it where the thing is stepping
up one time each
time. Just like
that. Now, on some of these, if you do
it
slow, sometimes they'll
hang. This one's pretty good, but that's
not how the game does it anyway. The
game does it violently. It does it like
this. So, if it's working like that,
you're good. This isn't the greatest
design that got lib ever had. I just
showed you the chime thing earlier and
talked about what a great design that
was. This, not so much. It just they get
gummed up and they don't work very well.
And so, every one of these games, this
this little thing isn't working right.
Um, everything I learned about working
on em pinballs I learned from Clay at
pinrepair.com. He's just, you know, he
was the first major guy that was putting
stuff on the internet telling everybody
how to do this. Um, and he hates these
things. He talks about how he he doesn't
even take it apart like we did. We he he
just cleans them as best he can and runs
with it. And that guy really knows his
stuff. So,
um, it's just how it is. So, that little
thing earlier about the chime that I was
showing that, you know, how cool the
chime worked and everything, I think
what I'm going to do is, of course, you
just saw that in this video here on
YouTube, but I think what I'm going to
do is I'm going to take just that part
where we just show the chime unit. you
know, this video is an hour long or
whatever it is. Just that part where we
just show the chime unit and I'm going
to separate that out into like a five or
six minute long video and then I'm going
to upload that to our new Patreon
channel and I might have it come out,
you know, a little bit before this one
debuts, the full video or something as
like a little sneak peek. But uh if you
don't know about that, we've started a
Patreon channel and we thought about
this for years and there's a pro the
problem we had with the Patreon thing
was we didn't want to put things on
Patreon that you had to pay to watch or
whatever because some people can't
afford to to do that. You know, it's
kind of a it's kind of a luxury thing.
And so lots of people wanted us to do
that and was like, "Hey, do Patreon.
We'd like to support your channel with
Patreon." But I want to make sure that
all of our videos are are free, you
know. So, you just saw that thing with
the chime unit. Um, so why would anybody
want to see it on Patreon? Well, I think
what we finally have came up with and I
think it's a good idea is this video is
an hour long and we're talking about
several different things in it. But that
part with just the chime unit, that
could be its own little video, right?
That could be like a little five or six
minute video. Now, that wouldn't be much
here on YouTube because we do long form
content that, you know, goes a while as
we're working through this pinball
machine, but in the future, somebody
might want to see, hey, I've got a I've
got a Gotub Chime unit that I'm working
on, uh, blah blah blah, and we can point
them to that video. So, what we've been
doing is uploading little snippets like
that out of the released videos that
we've already done. And we have 1,500
videos on
YouTube. And hidden in the middle of all
of those videos is all kinds of advice
and information and repair tips and for
pinball machines and arcade games and
juke boxes and all kinds of stuff,
right? Um, but they're kind of hidden
there. And people email us all the time.
I had a guy just earlier email me and
say, "Hey, I'm back I'm I'm clear
coating a back glass with triple thick
on my pinball machine. uh what do you do
with the score windows? Because the
video he was watching where he saw me
talking about that, I didn't mention the
score windows, but I've mentioned that
like 10 other times. It's just he can't
find that video because I've done it.
There's probably 30 videos of us working
on a back glass.
So on Patreon, one of the things that
we're putting on there is little
topical snippets of videos where it's
just this is just about this subject.
This is just about this subject. It's
almost like little repair tips. Um, and
we're also putting some things on there
that we can't use on YouTube. Like some
things are uh there's music playing and
YouTube won't let us upload that part of
the video. We have to clip it out. But
we can upload that full little clip on
Patreon. Or maybe there's uh the other
day we had a I found an old piece of
footage of us messing with the Pac-Man
board that we never actually fixed, but
I had this one little piece of a video
where I just started a video and uh we
never did anything with it. So uploaded
that on there. or we can't here on
YouTube, it'd be kind of useless because
nothing happened in it. So, if you'd
like to see stuff like that or uh even a
few things where we tried to fix
something and couldn't. Um, check out
our Patreon channel. It's down below the
link to all of the videos. So, we'll see
you over there. But here on YouTube,
everything's going to continue the same
as it as it has been. Um, you may I
guess if you were on Patreon, you would
see that little chime part before the
full video came out. So, I guess you get
a little sneak peek of some stuff. But
we're committed to making sure that
these videos remain on YouTube uh where
people can watch them for free. So to us
that's important. And you might say,
"Well, why is that important?" It's
because we were born
poor. Some people, you know, they can't
afford to spend a bunch of money on just
all kinds of different stuff. And it's
not a bunch of money. It's just a little
teeny bit of money if you want to join
Patreon. Um but we realize that, you
know, it's it's kind of a luxury and
some people don't want to do that. Some
people want to support the channel and
uh help us out. And some people aren't
really in a position where that makes
sense for them. So, we don't want to uh
we don't want to screw that up. So,
we're going to continue doing everything
on YouTube the same, but we're also
adding the Patreon thing. It's just
another another way to support the
channel. And um we've been doing it for
a couple weeks now, and it's pretty fun.
So, we'll see you over there on Patreon.
But, I want to put this back in the
machine and see if that fixes the hole.
So, I'm going to replace the lights that
are on the hole and put this back in and
see if that changes how it scores. Um,
how those lights work and all of that.
Let's see where see where we are with
it. Okay, so I put it back in. It looks
like somebody's already replaced all the
lights. And you've seen what we've done.
We haven't serviced half the stuff under
the playfield. I'm just we're trying I'm
just trying to focus on specific
stuff. We reset it again.
It it appears that if you hit the
rollovers or the standups that it will
light
these. So, let's
see. No. Okay, let's try
this.
H. That must have nothing to do with it.
How do we advance the
bonus? So, we got our green
light.
Um, I love those
chimes. All right. So, maybe Oh, we
haven't done any of the drop target
stuff, but let's see if
we get all three queens. He gave us
3,000. So, that's cool. All right. So,
for whatever reason, that just says
1,000. Let's see if it'll score a
th00and. And our chime works
now. Ah, you heard that,
right?
Dune. All right. So, you see what's
going on. So, we do have the green, the
white, green, the white, and the red.
And it's scoring all three. It's just
not lighting up the light. That makes
sense.
All right. So, let's see if we can reset
it. So, I keep talking about this
switch. The purpose of that switch is to
cancel that. So, whenever you open that,
the ball falls through there and hits
the switch and it shuts the gate. That's
all that switch is used for. So, let's
uh end the ball and then see if it
resets
that. And then we'll try it with two of
them. Oh, we got
it. Maybe it shook it into into uh shook
some sense into it.
So, it was resetting all that. Yeah,
we're going to get some some fun out of
this. Okay, so let's try that one more
time. Uh, the red
one, that time it wanted to cooperate.
So, what happens is when you hit that or
the rollover switch, it's dropping a a
relay underneath the the playfield and
there are there is a switch on that that
turns on the light. So, those switches
we haven't cleaned yet. So, that's why
it's not working quite right. So, that's
the red one. And then let's try the
white one that we can't
see. All right. So, I think both of
those are lit up. So, I think if we land
in there, we'll get 2,000
points. We still got three. 1,000 is
special when lit.
[Music]
H. Are we going to get that every time?
Let's try it.
Let's try it again. So that clunk that
you heard was it resetting those. And
then uh there's also a relay bank that
it resets. So let's try it with nothing
dropped 1,00. So let's try it with just
the
red. That's that's two. Oh, we're
getting one for landing in
there. Now we're getting two because of
that. So it's a it's a 1,000 in special
when
lit. And I guess they may mean when the
hole is
lit. Um, and now we're getting 2,000 cuz
we're getting that one and the red
one. If we drop the white
one, now we'd get 1,00 1,00
1,000. And then if we drop the green
one, the special is now
lit. It was just lit. So, who knows what
we'll get, but we should get
four. Yeah, it's
[Music]
not. So, I don't know if we're getting
that because of the points or if we're
if it's that's it giving us the special.
Yeah, it's giving us the special. Okay.
So, it's kind of limping along. All
right. Let's uh let's mess with
these relays here that that do the the
red, the white, and the
green. Red, white, green, red, white,
green. Let's mess with those and make
sure that they're nice and clean,
everything's working properly on that.
And then we'll uh we'll see if that gets
us the lights working properly, and the
uh the if we can get our 4,000 that we
want. Okay, so this is the relay bank.
And all this looks real scary, but
there's really not much to it. First of
all, there's several different ones. So,
there's 1 2 3 4 5 6 7 8. And they're
numbered 1 2 3 4 5 6 7 8. And they're
calling it 1B 2B 3B blah blah blah. So,
all of these all these wires, all the
spaghetti, most of that you never have
to mess with. Um, and the relays
themselves, because the blades are so
long, there's a lot of throw in them.
So, what happens is if you uh we were
just looking at the 8B one earlier or
whatever
uh which is this one, but one of those
the green, the white, and the red uh
rollovers, which are actually right
here. Um one of those is this one. So,
let's say this one's the green one or
whatever, right? Well, whenever it
trips, whenever you do whatever it is
that trips it, which in this case is you
roll over the switch or you hit the
standup switch, it trips this
relay. And so there, that relay is
actually sitting in there and it pulls
in that little
plate. You can see the relay there. It
pulls in that plate which drops this
actuator down which moves the switches.
So, some of the switches, like this end
one, were closed, but now it's open. And
some of the switches, like that one,
were open and now it's closed. So, it
just does whatever they've got it
designed to do. And it stays like that
until the entire thing is reset by this
coil. So, uh, usually it'll stay like
that for the rest of the ball. And
whenever the ball lands in the out hole,
one of the things that it does whenever
it's moving the player unit up and all
that is it resets it,
right? And so this bar pulls
in and every one of those relays gets
reset. Um, now here's the drop targets.
Similar thing, some of them drop. We
haven't messed with these yet, but blah
blah blah blah blah. They make switches
close and at whatever point that it does
it, both of these coils pull in. There's
two on this one just because there's so
many of them. It's so wide. If you were
pulling just from this end, that bar
might actually bend before it's at the
end and you wouldn't be able to reset
the bottom the the end one. You have
that problem sometimes on some of the
bigger drop target units. But they both
pull in. They're both attached to that
bar and they reset all of the drop
targets. Um so similarly that's reset.
So these were our three that we were
just messing with. green, white, and
red, or whatever, whichever one is
which. So, what are
these? Well, these have to do with which
drop targets are dropped. But we'll mess
with that next time. We I'm just working
on that hole this time. But here's the
drop targets. And I'll just show you.
You saw that there were queens, jacks,
tens, things like that. If you look on
the back, there is a switch on every one
of them. See it?
So when this drop target
drops, that little actuator hits the
switch and then it opens back up for the
points. And then on the other end, the
heel of the actuator thing or whatever
you want to call it, that cam connects
that
switch. Right? When I get
reset, the switch is opened back up and
this one's open. All right.
So, I'll just let you think about it a
little bit. We'll talk about it in the
next video. All of these, there's a
switch on the back of each one. We
covered those in the last video on the
uh or in on the previous video whenever
we were working on the Jack in the Box.
It's a Gotlib Jack in the Box. Does a
very similar thing. Those are what score
the points. And on the Jack in the Box,
it had switches up here that turned on
lights in front of the drop target. So,
it would change it from 10 points to 100
points or 100 points to thousand points,
something like that. The light would
light up. But on this one, there's no
lights. So, what do you think these do?
And look at
this. Some of
them have two switches. Now, why would
some of them have two
switches and some of them only have one
switch? It's kind of wild. So, we'll
talk about that next time. But let's put
the playfield back down and see if
cleaning these relays uh has made our
green, white, and red and special light
uh setup work. This is the special
relay KX. Same type of setup. There are
three switches on it. Um I clean those
three switches. So I would assume one of
them turns on that light. One of them
makes you actually score the extra man
and then who knows what the other one
does. Okay. So, let's put the playfield
back down and play it and see if our
kickout hole is finally working now.
Okay. So, I've been looking over the
schematics about how that's that that
section works. Now, I talked about the
eye
relay that, you know, the little stepper
unit that we messed with
earlier. That has to do with with some
things, but that's not what happens with
that hole. So, the it is, you know,
connected to it. But let's just look at
this one little part here. So, okay. So,
we know that whenever the G relay pulls
in, this switch closes and that is
actually what gives you the th00and
points. This is the 1000 point relay.
So, when the G relay closes, that gives
you 1,000 points. And I mentioned that
there were these other switches here and
blah blah blah. And I didn't look into
it, but now I have, and it's pretty
freaking awesome, like always. Look at
the brilliance of the design of this.
Once you see how they do it, you go,
"Well, of course that's how they did
it." But until you see it, you don't
quite understand what they were working
with. So, there is a switch that runs it
all that says motor 1A. Well, we already
looked at that switch before.
Um, motor 1A hits five times. So, if you
put a switch on that cam, when it gets
to this point, this point, this point,
this point, and this point, as the score
motor turns, that switch will close. So
that switch will close five
times. All right. So if we go back up
here and
look when our G relay pulls in, which is
the hole relay because the ball landed
in the hole on the playfield, not to be
confused with the out hole at the bottom
of the playfield, but the the ball lands
in there, turns on the G relay, right?
Well, that's going to hit five times. So
power will connect through there.
and that will be closed and give you a
th00and points. And then it would do it
four more times because the G relay
holds on the whole time. So what is with
all of these switches? Well, all of
these switches are perfectly placed so
that they open right when that switch
closes. So when 1 A closes, for
instance, let's look at motor 2C.
So the switch on 1 A closes right here.
That would give you a,000
points and then it would open again. And
then it would close again here and give
you another th000 points. Except
2C. They have a switch on it that's
normally closed that opens. So whenever
that switch closes, this one will be
open.
2C. Where are we?
So, when that one closes the first time,
you get 1,000 points. And then the
second time that it closes, you won't
get 1,000 points because that switch is
open. Ain't that a shame? My tears fell
like rain. So, you can't get 2,000
points, can you? Well, so the G relay
closes, which also closes this switch.
And if 3B has been
dropped, you would still get you you'd
get that thousand points because it goes
around it. So that switch would open,
but this one would be
closed. So the power would still go
through. And the second time that it
that 1A
closes, you would get your points.
Well, let's say that you hadn't dropped,
let's say that's the the the red one,
and you hadn't dropped the red one.
You'd only drop the white one. So, what
happens? Well, the second
time that one A hits, this would be
open, and that wouldn't be closed. But
this one would be closed. So, G would
connect here, and it would go around
there, and G is also connected there,
and it would go, oh, you wouldn't get
the points. So, the second time, you
wouldn't, if the white one was dropped,
you just wouldn't get that second point.
But when this one opened, so when it
goes to
three, so it closes and opens, closes
and opens. Well, now it's going to give
you a third,000, but it can't because
the switch at motor 3B has opened at the
same exact time. They designed it like
that on purpose, trying to take your
thousand
points. So now this switch is open. So
as this hits, the motor's turning. It
goes the first
time because the G- relay the whole
relay is
closed. You get your thousand points.
Now, if you if the ball is not in the
hole relay, the hole well then the G-
relay is not on. So, as that score motor
is turning, which it does all the time
for all kinds of reasons, none of this
does anything. It's not going to give
you any kind of points because that
relay is open. But let's say the ball
has landed in the hole. When it starts
turning, the first time that it hits out
of the five, bam, you're going to get a
th000 points. The second time it hits
out of the five, you're not going to get
anything because this switch is going to
open. But you will get 1,000 points if
you have just happen to drop 3B, which
is I guess I could probably tell you
it's uh the purple one. I was calling it
the red one, but it's purple. It's the
purple one. So, if you've dropped the
purple one on that second hit, you'll
get your,000 points. So, that's how you
get 2,000 points. And then it'll move on
to the third position and 3B will open
and you won't get those points unless
you have dropped the white uh the white
light is on. Then the power will run
through here through the G relay the
whole relay through there over to here
through the G relay again and then on.
So you can see that if any of these
switches on the G relay are dirty you
wouldn't score the points right? So,
whenever we uh had the problem where the
green one wasn't working, well, that
would be this
one. 1B is the green relay. So, it could
be that switch wasn't working right, or
it could be that switch wasn't working
right. This one's probably working right
because we seem to be getting the
thousand points for the white one. So,
if you've got the green relay
dropped, whenever it gets to this
position, that switch will open. So, you
won't get the fourth,000 points or the
Yeah, the fourth,000 points, but you
will because this one's closed. This
also proves our point that you do you
should get 4,000 points. You should get
a,000 just for playing the game and
landing in the hole. You should get
another one for the purple relay if
you've dropped it. You should get
another one for the white relay if
you've dropped it. And you should get
another one for the green relay if
you've dropped it. That's 4,000. Well,
what's this one for? Why would that one
open? Right? So, whenever you go to that
one, you're going to get your fifth,000
point, but you can't cuz they put a
switch that opens at 4C. Now, why would
they do that? It's cuz it doesn't say it
gives you 5,000 points. It says it gives
you 4,000 points. And they needed to do
something to mark that one
off. So, they've made that switch that
scores 5,000 points only score 4,000
points. And it only scores 1,000 points
unless you have effectively dropped the
relay that that adds this one back in.
And the relay that adds this one back
in. And the relay that adds this one
back in. And they've designed it in such
a way that you can get 1,000, skip the
next two, and then get the next
one. It's just it's brilliant. It's
absolutely brilliant. I can't even
believe that they would do that. It's
brilliant. All right. All right. Now, if
our cleaning skills are brilliant, that
ought to give us 4,000
points. Here we go. It's
resetting. It's trying real hard. I
think it might have
it. Remember, we haven't done the score
reels yet. Okay. So, um the purple
one, I like what I'm seeing so far. The
green one. Oh, it's trying to
cooperate. The the white one.
Look at
this. And the special even
lit. So, I should get I should get 1,000
just for playing the game. And then it
should move on. And when that thing goes
to hit the second thousand, because I've
dropped that one, this one, the purple
one, it should have short circuited it
and gave us that second one, too. And
then because I dropped this one,
whenever it goes and hits the third
time, since I've short circuited with
the white relay, it should give us the
third the 3,000 points, the third 1,000
points. And then when it gets to this
one, it's going to skip it. But since I
dropped the green relay, it should give
us that fourth 1,000 points. And then
when it gets to the fifth one, it's
going to skip it because this doesn't
say you get 5,000 points. It says you
get 4,000
points. Bam. That's how you're supposed
to do it.
Perfect. Absolutely perfect. Now, let's
see if this special is set on a free
game like I think it
is.
Bam. Perfect.
And so that's how all these features
work in these games. It makes a ton of
logical sense once you figure it out.
But whenever you first look at it or you
first look at the schematics, you go,
"What in the hell are they doing?
There's wires everywhere. What it it
doesn't make any sense." But then you
start looking at the switches and just
how everything's wired. And it's it's
beautiful. Really think about what's
going on here. Some engineer came up
with that all for the love of the game.
It's because they wanted to make it fun
and they they they they told some
somebody else, "Hey, I came up with this
idea." They probably they probably woke
up in the middle of the night and
thought of
that, you know? It's just it's it's
freaking awesome. It's some of the the
best part of pinball is just figuring
out how they designed it, why they
designed it, and the little tricks that
they pulled to to make that work. Think
about the significance of they had a cam
down there that turns and hits five
times, but they designed it to hit four
times because that's just how that's
what worked for this game. That's what
made sense for this game. All right, so
next time we'll talk about the drop
targets and we'll look over the rule set
and we'll play it a little bit. That'll
be our last video on this one. But this
is such a this is such a special game.
Everybody enjoys this game because the
rule set's so fun. Um, I just wanted to
spend a little extra time on showing off
some of its unique um, rule features.
And it's it's not that this is the only
one like that. No, lots of EM have
little tricky little stuff like that in
it where somebody uh, just had a
brilliant idea that on the face you look
at it and it doesn't seem like that big
of a deal because now you can do that
with a a microcontroller or, you know,
just a a little software script and it's
no big deal. But back then they had to
they you literally just saw how they're
making it work with freaking
switches. Just switches that turn on and
off and a motor that spins around and
they made it all
work. Absolutely brilliant. So if you
want to learn more about stuff like
that, like I like we talked about
earlier, check out our Patreon account
where we'll show little clips of some of
the stuff that we found like that over
the years. And make sure to check out
this video where we worked on another
classic got beautiful machine uh that
had a similar uh genius to it. We'll see
you on the next video. Hope you enjoyed
it.