I mentioned in the video that the start up sequence is unique in the Sonic machines; as we find in this video, it's actually very similar to the Bally start up sequence.
One of the ways you can support our channel, is by checking out the items we promote on Amazon. If you purchase any of these items, or even follow the link, it pays us a commission. Even if you purchase other products after following the link it pays us a commission.
At the moment, we'd like to show you this beautiful Weller soldering iron that we use every day in our videos. The Weller adjustable temperature irons work better than cheaper ones because they attempt to keep the tip at a certain temperature, and are a higher wattage. This helps you get nice solder joints and makes it easy to do repairs.
These links below are to this product in various areas of the world, thanks for watching!
Check Out Our Patreon Account, for Unreleased Repair FAILS, Concise Repair Tips Not Possible In This Long Form Video, And 1 on 1 Repair Assistance with YOUR Project!
Our store is located at 139 Caldwell St., Rock Hill, SC 29730.
AI Generated·May contain errors
Ladies and gentlemen, this is Joe's Classic Video Games back with another cool pinball repair video
for you this evening. We have a really special one here. This is Sonic Mars Trek. This is a
Spanish game made in Spain. I had a customer bring this by. It's not working properly. He
wants us to repair it. So we did a video on it already where we kind of looked it over,
figured out that the score motor was disassembled inside of it. We put it back together. Of course,
the head had been removed to bring it to us. So we cleaned up the Jones plugs and put them back in.
We kind of looked over everything. We found it was in pretty nice shape. The play field
on these is just amazing. They coated them with some kind of poly or something and it just looks,
they hold up really well. This is a very good looking game and we've got the schematics for
it fortunately. So we put the score motor back together. We got the thing to turn on
and then playing a game we kind of screwed around and got the ball to kick out.
But now it's stuck in just a reset loop where it's trying to count down a bonus it sounds like.
So the customer apparently had been working on it a little bit. There was a fuse blown and like I
said the score motor was disassembled. So it's just got some issues. Now the thing about these
Sonic games is like I said they're made in Spain and they copy some of the other companies but
their startup sequence works completely different than the ones that I've seen with Bally, Williams,
Gottlieb, the more traditional American companies that were more famous for it. So we're going to
look at the schematic and we're going to see exactly what the startup sequence is supposed
to do. But right now we're stuck in the middle of a game. So the first thing I'm going to do
is try to put it in game over by just lifting the play field and tripping the game over relay.
What do you think about that? That might be a good thing to try. So in other companies they
sometimes have a a double relay like this a trip and latch relay. That's the game over relay and
it's usually near the front of the machine. So I'm going to guess that's the game over relay.
I don't know for sure because it's written in Spanish. So it says on cloth latch e-n-c-l-a-v-e
and then the other one says de-s-n-c-l-a-v-e trip. Oh look it says it here game over relay. Okay I
was correct. Okay so I'm just we're in we seem to be in game play so I'm just going to trip it.
Now we should be in game over. So I'm going to turn it back on and see if we're in game over.
See what happens here. Nope it didn't like that. Well we're still right in the middle of a game.
Like I said it seems to be counting down. Oh we might have gotten somewhere
or it blew the fuse like it was before. Who knows. Let's see if we can start. Let's see if
we got nothing going on. It may have blown the fuse again. Let's see if we can get it to try
to start again so we can see what it's doing with the startup sequence. Got a fuse. Fuse isn't blown.
Okay so it kicked the ball out. We only got one flipper that'll work at the moment. Let's see.
There's some kind of relay stuck on. Probably some kind of scoring relay. You don't want to
leave anything stuck on too long that's buzzing. All right so we've we've got some serious issues
going on right. So let's uh when I went reset it did not even try to reset all the score reels.
So I think maybe we look at the startup sequence first. Work through that a little bit and then
we'll see if that bumps us into anything else that's acting up that'll make the thing play
properly. I will note too we talked about in the previous video the gentleman didn't bring us the
legs so it's sitting a little more flat than it's supposed to but it's not tilting. There's a tilt
bob inside that's not touching so it'll actually play like that. It's just too flat. Okay so let's
check out the schematics and see what the difference is between this and the more traditional
American design. So here is the schematic. It's like an old school blueprint that's brown and
come way over here we have the bonus unit reset coil. That's what we're hearing click click click
So why is that making noise? Well the reason you're hearing it over and over again is because
it's on the impulse uh cam of the score motor. So that the impulse cam will make an impulse so
usually five times from home position to home position. So these just come on and stay or just
come on once and then turn back off but this will have five on it boom boom boom boom boom. So
that's why you're hearing it come on and off over and over and over again. Okay well how does so
that's closing as the score motor is turning and it's connected through the double bonus relay. So
if the double bonus relay is not pulled in how it's drawn here the wire is connected this way
right and so if the double bonus relay was pulled in it would be connected this way
and you would get the bonus counted twice each time that it steps down it would it actually
steps down a lot slower whenever it's doing a double bonus but that doesn't matter. So
the bonus relay has to be on so if the bonus relay is on this switch is closed
and then as the score motor turns the impulse relay will fire that five times that's what
we're hearing. So this bonus relay must be turned on or this switch is stuck shut
but it's probably turned on. So the bonus relay
is right here so what holds it on well it can be turned on by the reset relay
or it can be held on by itself after it's turned on or it can be turned on by the hole switch. So
the hole switch is where the ball ends in the out hole whenever you lose your ball and that
is what's making it happen so it must be that it's connected through the hole switch and then
this is the bonus unit zero position switch so at zero that switch will open up well if that
switch is not open which would be if it's not at zero position so there's some kind of bonus on it
if that switch is closed at it when the score motor starts blah blah blah or at some point in
it the that will turn on the bonus relay. So the score motor is not turning so it's at its
index position okay the bonus unit is not at zero the ball lands in the hole that completes
the circuit to the bonus relay which turns on the bonus unit reset right so the bonus unit then
holds itself on right here bonus unit zero position until this bonus unit zero position
switch comes on both of these have to open up for that the for the bonus unit to turn itself on.
So basically the ball is landing an out hole it's turning on the bonus
relay the bonus relay is starting the bonus unit counting down but the bonus relay is never dropping
out so there is a switch on the bonus unit there's two of them actually zero position switch bonus
unit zero position switch one of those switches must not be opening so because it never gets down
and opens that switch that just keeps going on over and over and over so there's a little shaft
on the side of the bonus unit and as it comes around it hits that switch and opens it
which i think it is open and then here is the other one that it opens it's open as well and
it's closed on the other side so it looks like that's actually working properly so i don't you
know we'll have to keep our eye on that and figure out exactly what's going on but basically that's
what it's trying to do and whenever it gets down to that it could be that it steps back up after
that or something and that screws it up so basically a lot of times they will count a bonus
unit all the way to zero and then step it back up to one as the ball's kicking out or something so
it could be that this is caught in a loop where it's counting down to zero and then stepping back
up to one which closes the switches again which then it goes down to zero to open them but then
it counts back up to one and blah blah blah but that's basically what it's supposed to be doing
it's supposed to be opening those switches but let's get on to the part where we were looking at
the startups so here is the credit button also known as the start button so that's what we press
to start the game if the excuse me if the score motor is at its home position this switch will
be closed and if the reset relay is not resetting that switch will be closed so when you press that
button it connects that power and if the credit union credit unit open at zero position switch
is not open so like if there's zero credits on the credit unit this switch will be open and you
won't be able to start a game but if you've got at least one credit that switch will be closed
okay and then it gets up to here and it splits to several different
four different connections so if either the coin unit open at the last position switch is closed
which could be um i don't know we'll have to figure that out uh if the game over relay
is closed because the game's over if the ball count unit open at zero position switch
is closed because it's not at zero and if the player unit open at zero position switch is
closed because it's not zero any of those will turn on the credit relay whenever you hit the
start button so when the credit relay comes on it closes these two switches one of them
holds the credit relay on until this switch opens on the score motor another one using the same
connection to grant to the neutral here turns on the number three coin relay okay the number
three coin relay closes this switch right here which starts up the score motor so now we got
some action so the score motor starts turning and at the same time another switch on the number
three coin relay closes here and it does several things if the game is over it will turn on the
reset relay it will also turn on the number three and four score reset relay which will then pulse
as the impulse uh cam goes around so it'll hit it five times and then it'll also turn on the number
one and two score reset relay and it'll pulse as well with a different switch on the impulse
so all of those will start resetting at the same time because the uh number three coin relay has
turned on the reset relay in this now as soon as it does that the reset relay is going to hold all
of these on through this switch a switch on itself right and that's going to stay the reset relay is
basically going to stay on until all of the drum units are at their zero position because whenever
one of the score drums gets to zero a switch on that should store that score drum opens up
well if any of those then there's 16 i believe if any of those open up or are not opened up
the reset relay will continue to stay on that's probably what's going on with ours because if you
look our um our score is stuck at with a with 100 on one of the score reels which means that score
that that switch must be closed so it's keeping the reset relay on the whole time which is why
ours is just running and running whenever it's trying to start okay also if the bonus relay is on
it will do it now we know the bonus relay is on because the bonus uh reset or whatever just
keeps going and going and going but we need to confirm that here in a second and then um
there's also a place on the score motor where it closes as it's turning
uh which i guess they need for some reason i don't completely get that right at the moment but
let's look at the bonus relay again and see if that could possibly be on because of the reset
so here's the bonus relay again and we were just saying well it's staying on because it hasn't got
to the open at zero bonus unit zero position switch bonus unit zero position switch but it
could also stay on if the reset relay is closed and we know ours is because the reset relay can't
come off it can't turn off because the um it's holding itself on until all the score reels reset
and it's not resetting the score reels so this switch would be closed but you get to the same
point where since the zero position switch on the bonus unit has opened um that should be open it
should kill the reset relay's ability to do that um so yeah now what's the other way so it can
if that's in there it just runs through that um and then the other one is where is our other one
oh you know what oh yeah it's holding itself on until that one opens okay cool yeah so that
should be the bonus relay shouldn't be on because of our uh because of our uh the way the reset
relay is working okay so there is another option though i wonder if the bonus unit itself can
uh bonus unit yeah okay bonus unit reset can it do it without the bonus relay being on
so we've got those three impulses a double bonus relay the right eject relay and the bonus relay
are the only things that can turn that on so the bonus relay must be one okay so we got some kind
of problem with those open at zero switches something ain't quite right it could be somebody
sprayed something on there it could be there's a wire cross somewhere um but that's probably
what's going on but with that said let's see if we can get the score reels to reset it seems weird
that we're stuck on 100 points so i'm gonna go and uh we'll we'll uh well we can't get it the
game over because it's sitting there with the bonus unit going over and over again we'll turn
it on with the play field up and see uh see what that does if we remove the ball from the out hole
it may also allow it to stop because then the ball won't be on the whole switch so the ball
is not in the out hole and it can't do the countdown thing um okay so i guess we're in
game over i don't know yeah so nothing's going on we've got a bunch of lights on the play field
okay so without the ball in the out hole let's see if the credit button will work i don't think it will
yeah it will okay uh but it didn't uh it didn't kick the ball out i wonder if that's because the
ball is not in the out hole it doesn't matter on this one does it because it was just the credit
the credit button the ball actually being an out hole didn't matter okay so back to our startup
sequence obviously it's not doing these okay the score resets okay so number three coin relay turns
on the reset relay holds itself on until all of the score reels reset but you just notice that
ours turned itself off okay so reset relay comes through as the the score motor turns
it will reset the credit unit and one position until there's nothing left on it
or uh i guess as long as the credit relay is in uh it will increment the total play meter
and then through another switch it will uh send the coin unit up if the game is not resetting so
that's that's for if you've started a one player game or something because you're putting a coin in
but you're not actually resetting it uh you're just trying to add another player uh and then
if the reset relay is in it will be over here it will actually reset from the coin unit it will
latch the game over relay basically turning it off it will reset the ball count unit and then
through another switch on the reset relay it will increment the player unit reset now the reason that
they have this separate is so that when the game is not being reset you can still reset the player
unit um through the player reset relay and the score motor blah blah and it has to do with the
end of each ball so like if you're playing a one player game uh the player unit reset needs to it
needs to reset at the end of each ball if you're playing a two player game the player unit needs
to reset after every two balls okay so it should be doing all that too let's see if any of that
stuff has reset or if we can tell the player unit has definitely reset it reset back to one but we
could have done that earlier when we were screwing around with it this doesn't reset because it
doesn't matter we don't know if this reset but it ultimately doesn't matter because we'll probably
end up putting it on free play anyway okay this is the coin unit it's this is a very common thing
they've got the bar on top of this switch instead of under it so it's on a four player game right
now so that didn't reset but it really can't reset because it would have to push that blade
way out of the way it's that that uh blade is supposed to be on top of that so that's messed up
and then this is the ball count unit this is actually very similar to a bally with the
exception of this which is more similar than michael williams uh well i don't know that's
kind of like a bally too um so it's actually i was saying oh it's much different than the other
companies not really this must be a later version or something it's it's very similar to the way
bally did things um we were just working on all of this in the captain fantastic as a matter of
fact let me show you the captain fantastic motor um so you can see what they were doing around this
so this is bally's captain fantastic from 1975 that's a coin unit same things even in the same
place that's the ball um the ball and play unit ball count unit it's even in the same place and
then there's the score motor it's turned sideways but it's basically the same idea um the cams are
just a little closer on this one this is the internet data pinball databases listing it
actually didn't come out till august of 77 so there's a full two years after uh you know the
captain fantastic we were just looking at and captain fantastic was not the first bally to be
like that uh so i have had some of the earlier uh sonic ones and as i remember them maybe i'm
thinking of playmanic instead but as i remember they weren't all exactly like uh um they weren't
exactly like bally's um and there's the manufacturer sega s a which means spanish
association or something like that it means like a spanish company
sega doing business as sonic of spain right on okay so i tripped the game over so basically
we have moved this when it latches it pulls in like this so that's the game is in play
flippers work and when it trips because it's the end of the game goes that way now i'm sure some
of you can see at least one problem here this switch is not connected so this switch should
be connected like that so when this goes back and forth it should go from there to there
so let's figure out what that is now one one switch is not going to fix this whole thing
i'm just going through the things that are interesting that might you know be something
that pops up in a repair that you're doing ultimately the way we're going to fix this
is to clean all of the switches and go through and clean everything but whenever we find something
interesting as we're looking through it we might as well check it out all right so there is a brown
wire and then it is connected to here's the fun part trying to figure out what color they consider
these wires that's green and red i believe maybe red and maybe uh gray and red and then blue and
yellow that's what i'm going with folks what do you think about that well it's an easy one to find
it's right here so on one side is blue and yellow on the game over relay and depending on which way
the wire goes it's either connected to that or that so on one way it's connected to the player
up lights and when it's connected the other way it's connected to the game over light and our
game over light is not working remember so that's why our game over lights out so that's an easy one
but it has nothing to do with it not playing but it would be nice to have that game over light on
so we can tell if it's in game mode or game over mode as we work okay so i have adjusted it a
little closer and i cleaned the connectors i mean the contacts while i was at it so when it's this
way you can see it's touching the contacts on the right or it's opened up the ones where it was
touching on the left and then when it trips you can see it's now touching that one's touching that
one uh it's touching that one touching that one and that's when it's open and you can kind of
mess with it a little bit and just make sure that it's going back and forth everything looks really
good to me so that should be game over now also since it's so easy to do i moved that switch back
there so see how the little bar is under the blade now so when it gets to the fourth position
it should actually open that switch instead of the way they had it that switch is always closed
and the bar just pushes down on it and it can't reset back to one because one position one is
down under that but again that's just like valley so the point of that switch is when you get to
player four and you have spent four coins on a game it won't let you spend a fifth coin because
you can't start a five-player game so um on the back glass it said one to four can play
uh because they had it above that switch they basically had it stuck in a four-player game
so now it's now it's correct and whenever we start a game that should reset
down four positions below that and if all the light bulbs are working who knows uh it should say
one can play all right so i'm gonna put the play field down and we will start a game again let me
add some scores to all of these score reels and then we'll we'll put the play field down put the
ball in it start a game again and see if it'll reset any of the score okay so we got more scores
on it we'll turn it on we still have the problem with the bonus unit okay it stopped it got where
it wanted to be so why is it doing that it's probably that one of those switches is just
a little too close and it looks like it's open but maybe it's not open enough and when something
moves it bounces together something we'll burn that bridge when we get there but you can see
that our game over light is now on that's all we really fixed with that switch the four players
can play hopefully we'll reset the one when we start it although we haven't serviced that
stepper unit and uh we'll see if if any of these score reels will reset they all have a score on
okay so now it's just going to keep running because the reset relay cannot turn off
because it hasn't reset all of the scores so let's try resetting all the scores by hand
come on you sucker i hope we won't blow up a fuse i don't want to cooperate
the noise you're hearing is one of the reset relays is actually resetting okay so that kicked
twice and then the ball kicked out so why did it do that it's because this one the switch must be
open or dirty because that one is not on zero so that middle switch there would be the one
let me see is it the middle one or the top one no i'm wrong it's the top one so the top switch is
the one that will uh well yeah the top switch is the one that will keep the reset relay going so
if that top switch is open before you get to zero i can't really tell can we if that switch is either
open or so dirty that electricity won't go through it uh it won't have the volt it won't have the
basically to hold the reset relay on so this one it didn't matter if it was on one because it wasn't
going to hold that reset relay on but this one this one and those two did and then we kept seeing
this one pulse well that is the player three and four score reset relay but we never saw this one
pulse at all so player one and two never even tried to reset so three and four was resetting
which means this and everything under it was working but this one wasn't it's probably because
of this switch so the impulse switch number a forward it says on the score motor now the score
motor was disassembled in the previous video whenever we got it the somebody had been in there
messing with it so it could very well could be that all those switches are bent up and not closing
when they're supposed to and not open opening when they're supposed to you saw how badly that
game over switch was bent so i think the the best thing we can do for this and the next step
obviously would be to clean and adjust all the switches on the score motor and just see if any
of those are screwed up and we will particularly pay attention to impulse switch a forward on this
on the schematics it shows all of those the impulse is the second from the last cog and
you can see that there are five little bumps from home to home and then impulse forward
is the same thing but it has a slightly different blade on it so the blade lands right there on this
one but on this one it goes a little farther or something like that so it's just set up slightly
different but it's the it's the very last one and it has pulses to one two score reset relay it's
there's only one switch when it's kind of strange but that's how they did it so we'll look at that
one i would bet that that one never closes or it's really dirty also notice our one can play is back
instead of the four can play and it does say ball and play number one now so that's cool it should
one up up there should be lit too but that could be the light bulb okay so here is one a and it
don't look that great does it looks like the screw is loose or something and it just don't look like
that's right so i've got it turned off we'll turn it and see if it looks like that blade ever touches
that blade i don't know it kind of seems like it is if it's not it's really close yeah it's touching
because i can see it moving all right well we need to clean that for sure it could also be the
connector in the back even though i already cleaned them you know there's going to be one
wire going from here to the back to send power to that that that jones plug is dirty that could be
it so i'm going to clean this i'm going to clean all of them and work through i've got a little
flat file that i use to clean up contacts i'm gonna clean every one of them and then as i go
through like whenever i do this one i'll turn this a little bit and just look at each switch
and make sure that they all look like they're touching so i like look at this one see that
one's backwards it actually drops down when it gets to its spot see so it opens but watch when
it goes back up how it'll move the smaller blade so it's touching right but it needs to be clean
too because if it's got too much grease and grime and oxidation on it power won't go through it so
i'm gonna clean through those if i find anything weird i'll let you see it and then we'll try
starting it once again and see if it'll get the player one and two score relay score reset relay
to pull in okay i went through everyone and cleaned everyone and to be honest they all look
fine including that one that we were just looking at so i didn't see anything wrong with any of
those i'll tell you what i do see something wrong with though as we peck our way through this the
out hole switch this may be part of our problem as well so basically the ball lands in there and
moves this switch down which makes the two switches touch but if you look the two switches
are already touching because this stiffener blade is touching the top blade so it's touching
this is touching up here when it should only be touching this it's to make this blade stiffer
all right so it's touching it here but then it's moving up and touching it there
big no no so i got to bend that out of the way so that would be basically
causing some of our little issue because basically the ball is always in the out hole
um which would make it where you can't really play the game as soon as you started shooting the game
it would think that the ball landed in the out hole and it caused all kinds of problems
so that might be a big deal so let me uh move that and then uh we'll uh reset some of the
score reels again and try to start a new game okay so that's more like it um that top blade
you want as far up as possible because you want it to push on this and push it up as far as
possible and so when the ball lands on that it's going to push that top blade down and hit that
bottom blade and so you want the stiffener only touching the bottom blade now you want a pretty
healthy gap between there because what happens is just gravity will push this down a little bit
so if you're too close it will you'll get that problem we were just talking about
phantom closures so you want it to be open a little bit and the ball
lands in this track so it's going to push that down about that far remember the ball is round
obviously so it goes through that hole a little bit so it pushes that way down so you don't have
to be real close on that so it'll be interesting to see if that makes a huge difference uh i'm
gonna turn a couple of the score okay now we're probably still gonna have a problem where these
didn't reset because that score uh reset relay was pulling in but those weren't resetting well
why would that be it's probably because the switches on the score reset relay for player
three and four four are dirty let's do our bonus thing again take game over and we've got a match
okay finally got somewhere where it liked it okay so let's try starting it and see what we get
that's better okay so why didn't that one reset it's because the again the the switch is open
so it didn't uh another a different switch is open so basically the switch that it uses to
tell when it's at zero must be open on that one i know this is all confusing as hell to some people
it kicked the ball out by the way there are two there are three switches on it so the bottom switch
is the ninth position switch when you get to nine points that switch closes and so the next time you
get a point and you turn over to zero that switch is connected to the next score reel and makes it
ten so you don't go from nine to zero you go from nine to ten it needs the other score reel to do
the one so that's what the bottom one does the middle one is how it tells if the reel is back
at zero when it's resetting it so these reels will keep pulsing as long as the reset relay is pulled
in well if they didn't have that switch that individual switch for each one this one might be
on three so it needs seven pulses to get back to zero and this one is on five so it only needs five
pulses to get back to zero well when this one gets back to zero it opens that middle switch
which means if these keep pulsing that one won't move anymore that's what's going on here
it already thinks it's back at zero so these switches must be bent all to hell
our focus isn't helping as much but it doesn't know what to focus on
yeah so the switch is open it shouldn't be open right now it's not on zero
so that's the middle switch the top switch like we talked about is the one that they're all linked to
the reset relay so if any of those top switches is still closed it will just keep pulsing these
so you've got to get all of those switches adjusted right again though that's not a problem with the
sonic pinball machine the bally ones work just like that the williams ones work like that and
godlove ones work just like that okay so it did kick the ball out and it did reset all of the
score reels our problem must have been that that switch on the score motor was dirty so let's see
if anything wants to score didn't we try this and it was just giving us all kinds of problems
i love this spinner shot look at this it's got a horseshoe spinner shot so you go through this one
and it doesn't score you go through that one and it horseshoes around
all right we got something locked on
yeah it's not happy about something and it never gave us any points so we still got lots of issues
but hopefully that threw us in game over hopefully we got to the point where it will at least reset
now all right yeah so we've got it where it's doing that we know the deal with that one
maybe ball and play number two maybe
it doesn't like that bonus unit okay uh let's see if we can figure out what's locked on you hear it
okay it's the hundred point relay back to the schematics so here is the hundred point relay
and one of the ways that you turn it on is you hit the top bumper switch i think that's what
has done it in our case so it connects up here and depending on where the alternator relay is
it turns on the 100 point relay so that pulls in now once it pulls in a switch on itself holds on
and it will stay on until one of these four switches open see how they're all wired in series
and it's the first player 100 point drum unit end of stroke switch so until the first player pulls
in and gives it the hundred points that switch will never open or the second player or the third
player or the fourth player so if any of those player switches on the hundred point reel opens up
this will no longer be engaged and that will turn off ours is stuck on and if you look at the scores
we never got our 100 point so it that isn't what it's supposed to do it does that so that it has
it gives it plenty of time for this to pull in because it doesn't want you know you hit the
bumper switch for just a freaking hundredth of a second and it barely pulls this in for just a
second and it's not enough time for it to actually the switches on it to actually pull in the bumper
the the score motor the score reel right so it wants to make sure that there's plenty of time
for it to pull in the score reel far enough that it opens up the end of stroke switch and then that
will turn it off so that's our problem so we need to look at the uh the switch on the hundred point
relay that actually turns on the hundred point reel because we're not getting any points anyway
so here is that switch so that switch closes on the hundred point relay it should be closed now
but it goes through the player unit so the player unit depending on if it's on player one two three
or four it routes that signal to the first player 100 point drum unit or the second player 100 point
drum unit blah blah blah right so it will when that closes it will send it to it if this is dirty
this player unit then that signal won't go through just like we just fixed that one little switch
that looked fine but apparently was so dirty that electricity couldn't go through it so this player
unit needs to be cleaned or it won't score right so i'm just trying to make the point in these
videos that you can't really do it the way we're trying to do it right now because you'll you'll
run around hitting alligators in the head uh for the next three months you really need to drain the
swamp so that the alligators don't have any place to live right so you need to go through and clean
every switch in this freaking thing and i've had people argue with me about that oh you don't have
to do that the hell you don't you see what's going on we're chasing around issue after issue after
issue when what you need to do is go through and touch everything mess with everything but i'll
tell you what next thing we're going to do is we're going to work on the player unit so i will take it
apart clean that up and then we'll see if that gets the scoring to work so this is the player unit you
see how kind of dark all of those contacts are all of those are tarnished a little bit and this is
the platter that spins around on it so all of these little snowshoes need to be cleaned
and all of those need to be cleaned and that should do it so basically when it's in one
position everything's going to one two three four and then there's a couple other things too and
when it moves to the second position everything's going to one two three two four right three four
so that's how they route those signals so i'm going to clean that up put this back on
i'm going to make sure these switches are working right and i'm going to clean the first player the
first player one and two player reset relay just make sure they're fine and then this one and we'll
go from there okay so notice i didn't even have to remove it from the cabinet or anything which
isn't simple anyway because there's a lot of wires going to it got those clean it actually was moving
fine before it just i think where all those snowshoes were touching since those rivets weren't
clean they weren't making good contact so i took a little bit of sandpaper brightened them up got the
con got the uh corrosion off of them you can see in the middle there's a little brown little darker
spot that's because these things are always cupped they're they're not actually flat uh and then i
clean up all the snowshoes as well and what i do is i put some super lube on it just to make it uh
where it can slide a little easier some of the companies use this originally i don't know that
sonic did but you want to make sure that you get dielectric if you get electric
just kidding if you get conductive uh it will short every one of those pads together and then
that won't be good at all you'll have voltages going all over the place so it needs to be
dielectric which means that it's an insulator actually it doesn't allow electricity to go
through them so when you put it on the board which i already have you can't really tell but i put a
light coating on it it doesn't short all of those together if it was conductive all of those would
be conducted together right now now how does it allow electricity to go through these snowshoes
then through that grease that i just put on there well it's such a thin coat that when the metal
gets close to the other metal like sitting right on top of it it conducts anyway so it's like if
you see a spark in the air air is an insulator but you just saw electricity jump through it
so it will pass through an insulator and our problem on something like this especially with
this many points of contact is that you have to make sure that it can slide well so we have more
of a friction problem than we do a conductivity problem um with but to say with that said this
one also had a conductivity problem because everything's dirty well with that grease on there
it's less likely to get uh corroded again or oxidized again okay so i'm gonna put that back
on and then we'll put a ball back in it i'll set the scores up again like i said i gotta clean these
two really quick and then we'll see if it acts better and if it will finally score and if the
thing does not stick on on the playfield okay so i put it back together another thing i wanted to
point out is that it is actually a 10 millimeter nut on that thing because we are firmly in the
world of metric because it was actually built in spain instead of chicago like most of them are
so you know in spain they only use metric in chicago they use metric and sae because we can
do but look folks i don't want to get an argument okay so uh another thing to look at is when these
step up from place to place see how the snowshoe is not quite on the center so it's a little
so it's like a little forward okay but watch when we go back to the first position
so that's the first one so you might be tempted to move it back so that it's right in the middle
but if you did that when it's on the first one it would be even farther back
so i think it's probably a good compromise especially since most games are going to be
one-player games so we're kind of splitting the difference that's just how it was set up
now the way you would adjust that is this entire bakelite board will move there are two screws down
under there that you can loosen to do that but to be honest usually you can just twist it a little
bit and it'll move on its own because the screws don't hold it tight enough that it won't move at
all so if i was to grab it here and push up and grab it there and push back it would move a little
and we could recenter where those little snowshoes land but i like how it is because of whenever it
goes back to first player it goes a little too far you can adjust that out with this screw
but it's a little tricky so i'm not completely down with doing that right now so we're going
to leave it the way it is i think it's going to be just fine so we've adjusted that like i said
our bonus issue we'll figure that out come on come on now come on now it listens to me
i'm the pinball whisperer uh game over okay let's see if she'll do anything now if you want any of
this super lube we actually sell it on our website we have a link to it on our website
go to lionsarcade.com we have a parts page with a bunch of different stuff that we use in our
repairs maybe you might want the same thing right so if you go to our page there's a parts page on
the top and you go to this page and it has pictures and links of all the stuff that we use
there's probably 30 40 things in there so if you click any of those they take you to amazon
if you buy anything on amazon after you click one of those links we get money from it so we
appreciate everybody that has sent us money over the years by buying stuff on amazon maybe you
don't want to buy this on amazon but maybe you want to buy like a new camera tripod on amazon
if you click the link to go look at that and then go buy one of those on amazon
we also get money it's wonderful how it works it's been very good to us so we appreciate everybody
that's done that over the years um so anyway let's see if anything's different balls in the outhole
we're going to try to start it ball in play too so it didn't like something
it didn't it didn't like maybe the switch remember we messed with it we're also sitting weird because
we don't have the legs on it what do you think now let's see if anything locks on
nothing we cannot get scoring on this thing it just won't score oh lord we landed in collect bonus
yeah it is still stuck in and this is not pulling in but you see as soon as i pulled it in that
killed it so the problem is it that cannot power that so we got to figure out what that is is it
still an issue with our player unit let's try this let's move us up to player two player two here we
are so now we're on player two let's see if it does that on player two ball didn't kick out still
no it did not score anything it just will not score okay
so we got to look at the schematics again okay so what do we know the first player 100 point drum
unit seems fine and the second player 100 point drum unit seems fine i mean i don't see anything
burn up on them or anything and um the second player 100 one keeps resetting right doesn't
the reset relay make it make it reset so we know that that one in particular the coil actually works
because it's doing the thing where it resets till it gets to zero okay this one we are
theorizing doesn't because this switch is dirty or open okay so if you go back the player unit
we were on first player and then i moved it up the second player thinking well maybe the second
player worked neither one worked so it could be the switch on the 100 point relay but i already
cleaned that i just did it so when i did the two score reset relays i also did the 100 point
the 1,000 point and then the 10,000 point i think is the other one 100 point 1,000 point 10,000
so i cleaned all those switches um and they look fine they were dirty but um they were touching
well and everything so everything's fine but if you notice look where they all go to the reset
relay connects directly to this yellow wire which is the neutral so it connects to it see how it
jumps over and that's what's used to reset it that's working on the tube player at least but
to score the points it comes from this wire well this wire aha all of those point relays all of
the scoring gets its power from the tilt relay we haven't been able to score anything yet even the
100 that's on there i put on there by hand so could it be that the tilt relay has a bad switch
or a dirty switch right here so there's a gray and blue wire on one side of the tilt relay
and then on the other side is a white and orange wire so white and orange and gray and blue and
then yellow so here is the tilt relay okay so if the game tilts this pulls in and starts making a
bunch of noise and it changes a bunch of the connections on the switches so if you look here
that one's open but if it tilts oh it's closed maybe that turns on the tilt light
that one's open but if it's tilt oh it's closed that one's closed but if it tilts now it's open
okay so here are the two yellow wires so it could be either one either this switch or this switch
and if you look at this outside one it appears to have a white and orange which is what we were
thinking and that other one looks like a gray and blue is that what we were thinking so it's
probably this switch and i'll be damned if we don't have the same thing going on look so if it
goes in it touches that switch but it never goes back and touches this switch usually when you get
a bunch of these like this it's because somebody has tried to adjust them and is trying to figure
it out i'm a very patient person that doesn't bother me at all because people you know they
got a pinball machine they're gonna try to fix it and i think they should try to fix it a lot of
people don't see it that way they say oh if you don't know what you're doing don't mess with it
i don't see like that at all if you got something broke try to fix it that's how i am that's how i
learned to fix these imagine if i never would have tried to fix pinball machine i wouldn't be able to
fix this guy's for him all right so now they're see those are a little too close now because of
the way i just bend it so they're almost all touching at the same time so you don't want that
bend that one back just a little bit they make a little tool that actually you can do this with
you don't have to do it with your hand sometimes if i'm doing a video though it's a little easier
to just do it by hand so we want a little more of a gap in there right we don't want it like
where they're real close okay so that looks better so now whenever it's not tilted these
two are touching and whenever it's tilted those two are touching now look at the one on the right
see how it moves just a little bit that's what you want and then look at the one on the left see
how it moves just a little bit that's what you want when it touches the small blade it should
move it just slightly and that actually will keep them clean if it's adjusted like that because they
actually rub against each other and they'll clean the contacts a little bit okay so i'm going to
clean those though with a file just to get the dirt and the corrosion off of it it's that one
and uh then we'll try it again and see if that gets our scoring work okay could this be our
lucky time could it be all right came on without the bonus unit freaking out that's good but i
don't think i had anything to do with the tilt really um let's see if she still resets it even
reset our one this time uh bonus unit didn't do a bunch of craziness the third player 100 is still
not right but it's fine can we score a point oh yeah look at that it's almost like we know what
we're doing i love it the chimes are coming back give me those points we're getting a thousand a
hundred thousand points more than that half a million points already on the first ball oh man
we're great all right so obviously we still have farther to go we need to figure out the bonus unit
the ball is not regularly kicking out if you mess with it a little bit it'll do it
might have something to do with the index relay or something um so obviously we still have a lot
to go a lot more to fix on it but that's a good little start so i hope you enjoyed it
yeah get it buzzing better break a million i wonder if it buzzes when it gets to a million
okay folks i don't want to burn it up so we'll mess with all that next time leave
your comments below let us know what you think so far what do you think about the little horseshoe
uh spinner shot there that's pretty unique i don't know that i've seen that on one
um i think it's going to be a fun little game we're getting it a little closer
we've at least got it where it'll start up and we'll start a game and halfway play next time
we'll jump right on that bonus unit and keep working through it so i hope you enjoyed it
we will see you on the next video