One of the ways you can support our channel, is by checking out the items we promote on Amazon. If you purchase any of these items, or even follow the link, it pays us a commission. Even if you purchase other products after following the link it pays us a commission.
At the moment, we'd like to show you this beautiful Weller soldering iron that we use every day in our videos. The Weller adjustable temperature irons work better than cheaper ones because they attempt to keep the tip at a certain temperature, and are a higher wattage. This helps you get nice solder joints and makes it easy to do repairs.
These links below are to this product in various areas of the world, thanks for watching!
Check Out Our Patreon Account, for Unreleased Repair FAILS, Concise Repair Tips Not Possible In This Long Form Video, And 1 on 1 Repair Assistance with YOUR Project!
Our store is located at 139 Caldwell St., Rock Hill, SC 29730.
AI Generated·May contain errors
Ladies and gentlemen, this is Joe's Classic Video Games back with another cool pinball
repair video for you this evening. We're going to be working on a Bally Captain Fantastic EM
pinball machine. We've got a ton of machines in the shop right now. We're working on for
different folks and this Captain Fantastic is an EM. The rest of these are all solid state,
but if you didn't see the videos that we did on those, make sure to check them out here on our
channel and subscribe. We do videos like this all the time. Hope you will enjoy them. So I'm
going to pull out this Captain Fantastic, put it up on its legs, and then we'll go from there.
Back on its feet. This is one of the coolest games of all time really.
Bally's Captain Fantastic. So this is what the cabinet looks like. A little beat up. Not too
bad though. The front is the worst part. That can be stenciled back in. You can paint it by hand,
but you miss all of the overspray. It was done with stencils, so if you look, there's not a
perfect line between the red and the blue. There's a little overspray where they didn't have it
completely flat against the cabinet. So that's, like look at the blue there on the white. That's
kind of how it's supposed to look. So you can kind of tell at a glance if one's been stenciled
that way or if somebody just painted it back in by hand. This side's a little rough too.
It seems pretty solid though. It's just the paint's flaking off.
The good news is the back glass seems to be in perfect shape. Perfect shape. We were talking
with the customer when he dropped it off. He was telling his wife about the stars on the back glass.
How they are strategically placed on this later version of it. There was an earlier version where
it wasn't quite as bad. I mean for the earlier version it was a little worse. So like that star
right there is to, you know, so you can't see her hand, you know. So that's cleaning up the
cleaning up the art to make it where people wouldn't get in trouble for making such a
cool looking back glass. It's a little over the top. I will give it that. Elton John doing his
thing. I mean the pinball wizard doing his thing. I mean Captain Fantastic doing his thing. Okay,
let's take the the glass off so we can get a better look at the plate. These are actually
backwards. That's supposed to be over here and this is supposed to be over here. But you know,
what's the matter? I think that's right. Maybe I've got that wrong. No, I've got it right here.
I'll show you how I know. This is a Gotlib game that we're working on right now. And on some of
the older games they were actually different sizes. The instructions were always bigger.
So you see these, it can't go the other way. So it's got to be that way. So I think the whole
thought process behind it was the cost is right here by where the ball comes out. At what cost
to replace the ball right there. That's how much money you can get. You can get three
places. It's right there. It has something to do with that. The cost one goes right by the shooter.
It doesn't really matter, but I think that's how it's supposed to be. This little lens is missing.
That's interesting. I've never seen that. And it's been missing a long time because if you look,
the label from 1983 is over the hole. So either they removed the lens to put the sticker on there
or they removed the lens and then put the sticker on and then put the lens back,
which kind of crazy they'd go through all that trouble. And then at some point it popped out.
But it looks to me like it's been missing since damn near 1983. All right. So the play field,
there's just a little bit of wear right there where the flipper has been dragging,
but the rest of it's pretty good. I don't know if all of this is wear or it's dust.
Let's see. Shall we get off of there? Come off. Get off. I think it's wear. Oh, well,
a lot of blue is a little worn. We will clean it up though as good as we can make it look a lot
better. The flipper rings have broken off. They gave up the ghost. That's all right. And all of
the people at the concert were really out of control here. There's Elton himself. Look at him.
GGC. Pretty cool. It's a very classic game. Very fun. Very cool. All right. Let's look in the
back box. We've already got it opened up. The customer, he didn't bring the door. I think he
said though that he has it. He just didn't bring it, which is fine. It's all pretty dirty,
but you know what? I think it'll clean right up. There's our over the top relays. Probably one of
my favorite relays. If you get a hundred thousand points, this sucker comes on the over the top
relay and it makes a buzzer go off and it lights up a hundred thousand point light because the
score reels can't display a hundred thousand. They can only display 99,990 points. These are
point relays. I haven't worked on an EM in a while. It's been a few months. I'll have to watch
some of my videos to figure out what I'm supposed to do first. If I remember correctly, I do
different things first all the time, so it doesn't really matter. All right. So let me prop up the
play field and let's see what it looks like underneath the plate. Look at all those coils
at the top. Look at that. That's got to be a record, doesn't it? There's nine coils right there.
That's worse than some of those Jersey Jack jobs I see. Jersey Jack boy, he likes to put extra stuff
in the game, doesn't he? They're cool. There's another one. Prop targets, three pop bumpers,
a bonus unit. Now look at this. See the rivets on the bonus unit, how they're kind of dirty?
And see just the general dirt of the machine? Kind of dirty. See all the black? That's kind
of like from the electromechanical magnetism of the coils. For whatever reason,
whenever electromagnet coils pull in, they attract like dust and dirt and stuff. It just kind of
wants it. Look at this. Same thing. So this thing is kind of covered with that.
And so to compensate for this thing being sluggish, they have shortened these springs. See
how weird that spring looks? It's all extended. See how that one's all extended? I don't even
think that's the original one. So they've put stronger springs on it to make it where this
thing will pull up like it's supposed to. Let's see, when it goes in, it pulls these down and
then you need a spring to help it come back up. So they put some really strong springs in there.
Here's a real weak one here. So we might have to mess with that a little bit. Let's see if they did
the same thing on these other ones. No, that one looks like the originals. Both of those look like
the originals. It might be stretched a little. No, they look pretty good. Got cat hair on them.
Let's look at the one in the back. That one's normal. And those two are normal. So yeah,
that one they've just kind of messed around with. We got so many games in here to fix,
I can't hardly get around. Look at all these. Look at them. They're multiplying. We keep fixing
them and we're getting them as quick as we can fix. Look, I've even got a PakiSlow machine over
there. These are all in line to be fixed. They're coming up. I don't see any burn up coils or
anything. Everything looks pretty good. It's just all dirty and needs cleaned and adjusted.
Okay, so the first thing I'm going to do, I'm going to pull the play field out of here.
I would try to play it. It doesn't have a ball in it. And to be honest, I'm out of pinballs right
now. We're waiting on a shipment of pinballs. Yes, that's right. Pinball repair people have
to order in shipments of pinballs. Look at all these pinball machines. I'm going to need a bunch
of freaking pinballs. Okay. So I got them coming. So I'm going to pull out the play field. Maybe by
the end of the video, we'll have one so we can test it to see if I got anywhere. But I don't,
I don't know if it would work right now or not. I guess I could put a used one in there,
but I don't really like doing that because it might eat up. Well, okay. You talked me into it.
I'm going to put a used pinball in it just so we can see if the thing will start and do anything.
So when I plugged it in, it went,
it sounded like something reset. And then it's just sitting here, sitting here.
Let's see if she'll start. It says I've got two credits. Yeah, it's trying. So reset the drop
targets. It took away two of my credits. It's making some buzzing noise because something's
locked on or something. Um, flippers aren't working. So yeah, I will not start a game.
It just kind of starts a game. We're in the middle of, uh, we're in, we're in limbo land,
right? The, the, the light bulbs are kind of, I mean, it's got a bunch of blinkers in it,
but the light bulbs are kind of pulsing on the back box and that's all we're getting.
So I'm going to turn it off, unplug it, and then I'm going to take the play field out of it. Like
I wanted to do before y'all talked me into trying to start. Okay. So I vacuumed it out,
just trying to get rid of some of the dirt and the dust. I got rid of some of it,
but there's enough there to keep it authentic. All right. Um, I found just a couple of things
in it. One is the, uh, one of the point score cards. It came with a whole bunch of these
originally so that you could set up whatever score you'd liked at it for the replay. I did
find an extra one of those springs, a fuse, and this little piece of plastic. Um, I think,
well, I don't know what that is, but you know what that is? All right. Here's it. Here's our test
to long-term pinball guys. What is that? That is going to be the end of one of the plungers that
goes in the chime. So we'll hang on to that. We may need it. Um, here's the over the top relay,
buzzer I was talking about. Um, okay. So I'm going to start cleaning through all of these
relays. If you haven't seen my videos, when I do EM pinball machines, basically what I do is I go
through and I clean every single switch. Um, and that gets them going again. So I use a little
point file. It's a really, really, um, you know, almost worn out. You can use a piece of paper,
actually, if you can get it into the switches, but basically you need to clean the face of the
contacts of all of the switches because after they sit for a while, they just get all dirty
like that. Um, so that's what I'm gonna do. I'm gonna go through and clean every one of them.
Look at them. There's a bunch of them, hundreds of them. So I'm gonna do that first. If I find a
relay that is way out of adjustment, where it looks like it was never touching or it's touching
the whole time or something, I'll show you that. But basically I just need to go through and clean
a whole bunch of these relay switches so that the, whenever the relays pull in, the switches
are actually making electrical contact. So that's step one. Okay. So I went through and cleaned the
switches on all of them. They're not in great shape because I've got, I guess it's cat hair,
but it might be rat hair or something. I don't know, but I did get all the contacts clean.
They're all moving freely. Everything seems fine. I need to check that bulb and that bulb to make
sure they work. The game won't play right without those bulbs by the way. And then we get to these
two, which is the game over relay. And, uh, I don't remember what this one's called, but both
of these are important. This might just be the tilt. Um, and they have been attacked by these
freaking rats. I think they urinated all over them and they don't look great. I was able to clean
them. They're moving right. They're closing and opening like they should. But, uh, if we end up
having a problem, that's probably where, now there was a switch on the game over relay that was stuck
open, no matter what happened, it wouldn't close. Um, so I got it adjusted where it's open and
closed. When I was younger, I had some games that I couldn't fix. The first ones that I got,
I wasn't able to fix. I didn't understand how any of this worked. Once you figure out that all of
these switches, and this sounds so simple, but this was what really made me start being able to
repair them. If the switch is already closed, when the relay comes in, the switch should open.
If the switch is already open, when the relay comes in, the switch should close.
That's the secret to the whole thing. If you've got a switch that's open and the relay comes in
and it's still open, that switch ain't adjusted right. If you've got a switch that's closed and
when the relay pulls in, the switch stays closed, something's not adjusted right. They wouldn't
need that. They wouldn't have a switch that doesn't open and close whenever it changes state
because they wouldn't need the switch. They could just tie the two wires together if they
were supposed to be closed all the time. Or if they were supposed to be open all the time,
they wouldn't run anywhere near each other. So if they're running to a switch, the switch,
if it's closed, it should open. And if it's open, it should close. It's as simple as that.
Once you figure that out, everything starts making sense. I'm not really ashamed to say that
because I think a lot of people have the same issue. When I first started messing with them,
I had no clue about that. That just, this was all just so strange to me. Now they have
written on the side of the cabinet what the coils all are because you can't hardly read the paper
on it. So player reset, bonus ball, extra ball, tilt, ball index, out hole, the delay relay.
I think that says reset relay. I can't wait. There you go. Reset relay. I can't tell what
that one says. Lock, lock relay, coin, no credit relay, coin relay. That says coin. I don't,
that's like third coin, third coin shoot or something like that. Second coin, third coin,
and two coins, one play. All of these coils here are for different setups for the coin door.
And then on the other side, they have also written it down. It's over here to tell us that it's
the advance relay, the bottom lane relay, the A relay, the B relay, the something target,
the game over reset, the game over and the game over reset relay. All right. So that's that. So
I'm going to check the two bulbs. Those are 455 bulbs, flashers. The way that works is
when the coil is pulled in, it goes through that bulb. So if that bulb's bad, the coil can never
pull in. And if you put a regular bulb in there, it will stay in forever until you turn the power
off. You're not supposed to do that. So you're supposed to put a 455, which is a flasher bulb
in there, because what happens is it pulls in and then once the bulb heats up, it turns off
and then it'll stay off until the next time it needs to pull in. So it's gotta be a 455 flasher,
which both of those are, but they're so old, they might be burned up. Okay. So I got to do that.
And then next up, I'm going to clean all of the switches on the score motor here. Every single
one of those has to open and close just right or the game will not play right. So that is next.
So we're getting through it a little bit. I'd love to get some more of that stuff cleaned off.
The way you can clean this, if you're doing it at your house and you've got plenty of time,
everything I do, I have to charge the customer for. So they don't want me going through and
doing a whole bunch of stuff. And I don't want to really go through and do a whole bunch of stuff.
I'm not great at cleaning things, but you can unscrew all of this stuff. None of this is
glued on. It's all screwed on. The paper is stapled on, but it's all pretty rough shape.
Anyway, you can print new paper, but you can go through and remove everything that's screwed on
and take all of this off at one time as a harness. If you carefully put it back and then you can
even replace that bottom piece of wood if you want, or you can clean it all up and paint it.
You could paint it blue or something, you know, and then once you've done that and you've got it
all clean and nice looking clean, all of this stuff, either by hand, or I've seen some people
put it in the dishwasher, just wash the whole thing in the dishwasher, which will get all your
wires clean and stuff. Now don't do that. Uh, I don't think that I told you to do that. I didn't
tell you to do that. Do not put that in the dishwasher, but some people do. And whenever
they do, they get it all nice and clean. And whenever it's done, you just carefully screw
everything back in place and it looks freaking brand new, but that's about 10 hours of work.
Really? You know, and I'm the customer does not want me to charge them an extra 10 hours of work
to make that look pretty, but I'm going to try to clean up some of it. Um, cause I can do that
pretty quick. Um, and I'm going to clean these score reel switches and I'm going to check those
two lamps. That's our next. Okay. So on this, on these switch stacks, basically the motor turns
this, you know, the, these reels around these cams and it pushes the switches up or lets them fall
down. So that top one, this is very common. You'll get where one of the ones on the top is all been
all out of place. So like, look at this top one, no matter what happens, that big blade never hits
the small one because this small blade is bent up in the air. Now, how did that happen? That's
because it's real common for people to put things inside the machine. So like you slide the paperwork
in there or something and it hits one of these blades and bends it up. So that one, now that
one's down below the other one. So you wouldn't think it would do that, but it did. Um, so that
one needs to be bent down so that it makes better contact. Okay. So I got the long blade straightened
out to where it's actually resting on the blades under it, right? These little lifters here. Um,
and it's not touching the small one, so I can press the small one down.
And then whenever it rises up on the cam, the, the, the impulse of the cam,
you see it pushes into the small blade. You see the one, the two underneath that are doing the
same and that's just what you need to do. So you need all of them to do that. So that was an
example of one that was open. And when the switch turned, whenever it turned around the little bump,
it stayed open. It never closed. So that, that something was wrong with that. Let's see if we
figure out what that does. Okay. So on the schematics, they have these little circles
drawn. Those are the score motor switches and it's different on each company. This is how
Bali did it. And so that one is 11C. It's the third switch on top of that stack. Um, and it
appears to be the one that resets the number two score reset relay or turns on the number two score
reset relay. So basically if you had points on the third player and a fourth player, they probably
wouldn't reset because that reset relay would never go in because that switch was never closing.
So we got the score motor working. All right. Well, it's cleaned. At least the switch is
clean. Look at the coin unit. Look at this. So you see all the oxidation. Well, what is that from?
I think it's urine. I think it's mouse urine. That's my guess. And then this would be, uh,
ball count unit, I believe. So I think it's the coin unit, the ball count unit.
So let's see what were to happen if the coin unit was not connected.
Okay. So the coin unit, if you only have one coin in, it's connected right here. So what happens is
when the score motor turns, uh, it will turn on the ball count step up solenoid unit.
Um, if the out-hole relay is on. So if the out-hole relay is on because the ball is sitting
in the out-hole, it will step up through that connection. It will turn on the ball count step
up solenoid and put it up to ball two, ball three, ball four. If you have like a three-player game,
let's say, then it, it moves this up to three because you've used three coins. And so then
whenever the ball lands in the out-hole and you're on player one, uh, nothing happens.
And so the player up disc, when it steps up to player two, player three,
whenever it finally gets to player three and it's in the out-hole, blah, blah, blah, blah,
then it doesn't. So it's how it ends the game before the fourth. That's how it ends the ball
before the fourth player plays the ball. Um, when you get to player four at the end of that ball,
it's hardwired in to turn on the step up solenoid. So if you could ever get in there
and disconnect that thing, um, slide a piece of paper between that or something,
it would just always play a four-player game. So if you've got one that's playing,
it always plays a four-player game or always plays a three-player game or something like that.
It's probably, you've got some kind of, I don't think it can break where it goes from one to
three. I think it's either gotta be one or four. Um, unless you actually start a three-player game,
of course. So, uh, it basically, so far we're finding things that aren't,
that wouldn't completely cripple the game. They would just make it where it didn't play right.
Okay. So I used some sandpaper to sand it down, but you can see that it's deteriorated. This is
probably the worst one I've ever seen. Actually. I've never seen one where they actually cause
problems on this. Usually 99% of these that you see, the, the traces are still fine. They just
This one, uh, the plating has came off of some of it.
Just, I guess from the acidic nature of the, what I think is urine, but it looks really bad,
but it's not as bad as you might think. So the worst ones are down here and those are not
connected to anything. They're not using any of those. Okay. And so there is one set, you can see
right here where the set of wipers has been sitting on those little posts. So you might
think, oh, well that's going to screw it up. Well, the reason that it does that is because
the left one sits out here on this wiper and then it's kind of connected there. And then as it turns,
it connects the wiper to one more and one more and one more, and it turns on lights and stuff.
Right. And so it doesn't matter if these are screwed up, you can see there's no wire on it.
If it's all right up here, you're all right in here and here. So that's that. And then you got
this side, it's the same thing. So they were sitting right here, but that would have them
all connected together. It doesn't matter when it goes down. Now you've got one here and then
at least one of these has to touch. And then if it goes down another one, you've got one here.
This one has to touch, which it will. And at least one of these has to touch and then bam,
bam, bam, bam, bam. So it looks really bad. It's not that bad. And up at the top of their
I think these might be the ones that do the light bulbs. So I think it'll be all right.
It just needs to be cleaned up. So I'm going to put super lube on it.
Dielectric grease. I keep having people tell me, Oh no, just leave it dry. No, no, no,
don't do it. Look, folks, this is what you want. Dielectric grease. It's perfect for this.
And yes, dielectric is an insulator. It's not a conductor. So you're thinking, well,
if you're putting it on this, it's not going to conduct. It does whenever there's very little
of it between the metal and the metal, it conducts just fine. It's like how the air
is a conductor. Have you ever seen a spark? If you've ever seen a spark, then you saw
electricity fly through air, which is an insulator. Okay. So it's completely possible.
So I put a little dielectric grease on it to, and the reason for that is because you're trying
to overcome the friction of the thing turning. You want it to be able to turn very, very nicely.
Okay. You're not worried about the conductivity of it. It's going to conduct just fine. If it's
touching metal or metal, it's going to conduct just fine. Especially if it stays clean,
this will keep it clean. It'll keep it from oxidizing. It won't keep mice from destroying
it, but it'll keep it from oxidizing. So this is the way to go. If you want some of this
to use on your machines. And by the way, the Gottlieb machines came with this one from the
factory. So don't take it up with me. Go back and find Mr. Gottlieb and bring it up with him. Okay.
Or you know what? You know what you could do is do whatever the hell you want. And don't worry
about what I say on my videos. And you don't have to argue with me. Most of you get that,
but some of you do not get that. You want to argue oh so much. Okay. So I'm going to put a
I'm going to clean up the little spider that goes on there and then we'll see how.
Okay. So there's another little thing that we check. There is a switch here that is the
coin limit switch or something like that. It basically, it keeps you from putting in a fifth
quarter. So it's on position one right now. Position two, it has opened. Position three,
it's still open. Position four, it's still open. That's not how that's supposed to be at all.
Do you notice how it comes out of there and is bent? It's because somebody has screwed with it
or it has done it automatically. I don't know. We got to get this back over on this side of this
thing. That goes like that. Kind of finagle it back how it was supposed to be originally. I
don't mangle it worse than it was. Okay. So see how it's open at position four? That's how it's
supposed to be. So it should be closed at position one. Of course it's not because I've been at all
crap. I've got a little adjuster for these. It's better to use. Okay. So see how it's closed now?
And if we push on it a little bit, see how the small blade moves when I move the big blade?
That's because they're connected because they're touching. Okay. So this is position one. All
right. So you put a quarter in because you want to start a two player game. It steps up to player
two. All right. Now you put another quarter in because you want to start a three player game.
It steps up to player three. Okay. We're going to make sure that it's still connected.
It's close. I'm going to move it just a little bit. Okay. So see how I'm pushing it and it's still
moving the small blade? That's telling you that it's still connected. All right. So now you're
on player three and you want to play. You want to go all the way. You want to play a four player game.
How was I doing that a second ago where you can see it? There we go. So you put in a fourth quarter
and it opens the switch. Okay. So now you're playing a four player game. You want to play
a five player game, but you can't play a five player game because this is only a four player
game. Right? So you're a moron who likes to argue with me about super lube and you put in a fifth
quarter and it gives you your quarterback because that switch is open. Right. Or it won't accept,
I guess what I should say is it won't, it won't accept the start button. It'll still take your
quarter. It just gives you an extra credit that can't be used yet. So you can only start a four
player game if that switch is working right. So that's how you want it. And it should reset back
to zero when you hit this one. And then each time you step up, it should move farther along. So see
now it's connecting three of them, blah, blah, blah. And that's how it works. So you just need
to make sure those are all making good contact all the way around. I know they're ugly as crap,
but that's all the best I can get them. Um, I think it'll be fine like that. So that's a,
that's a pretty rough one. So now we've got to do the same with this one. It's basically the
same principle, but it has nothing to do with the coin. If you would like to not be a moron
and not get called out on my videos, get super lube. This can be found at lionsarcade.com.
Click the parts section at the top. And there are links to super lube and many other wonderful
products that we lose, lose and literally use in our videos. Click parts at the top
and you will find many products like super lube and many other products that we use in our video.
They're wonderful. Take three. Click parts at the top and you will find super lube and many other
wonderful products that we use in our videos. If you follow any of those links, it will take you
to Amazon and we will earn a commission from it. Thank you for your support. lionsarcade.com
where non losers get their pinball super lube. Okay, folks, I slid the play field back in it.
I didn't clean the Jones plugs yet or anything. We just did the stuff on the bottom. Um, we didn't
clean any of the Jones plugs on the bottom either. So let's see if we get anything different.
Well, it did something now it's saying one, two, three, four can play. Cause we moved that,
um, coin unit. So let's see if it'll start a game. Was that better or worse?
I think it's the same. I think it's the same as it was. Isn't it?
Well, that didn't get it. This video is a failure. So what did we do?
We fixed the two, uh, stepper units in the bottom, the coin unit and the ball count unit.
Uh, we found that the game over relay looked like it was all screwed up,
cleaned it. We cleaned all the switches in the bottom. There was one switch on the game over
relay that seemed to me like it wasn't connected. So we got it going. Um, I found a couple other
switches on this side that didn't look like they were touching, but you know, um, I adjusted them.
Uh, we found the switch that was screwed up on the motor unit, the score motor, and we cleaned
everything, all of the, the bottom of the cabinet. Although at first glance, you might not be able
to tell it. So, uh, all that still have the same kind of issue. Oh, we replaced the two lamps to
the little blinkers. I could have just took a couple out of the back box. Well,
they got it in there. Don't they? They're trying to make it look flashy.
Elton would approve. He likes flashy. So yeah, so you hit start. It decrements a credit.
It, uh, resets the drop targets. Uh, you hear something turn, which is probably the score
motor. And then it never kicks the ball out or anything. It says two can play. I think it probably
moved up to three can play. If I hit it one more time, maybe it'll do the four can play.
Oh no. Hmm. Well, who knows something's going on. Um, so it's, it's stuck in the startup sequence
where it won't kick the ball. So I'm not going to fix it right now because I want to systematically
keep cleaning through it. And then we'll fix it at the end. If you, if you try to fix it first,
the problem you run into is I fixed that. And then now the second player there, the third and
fourth player, uh, score reels don't work. Don't reset. And the game just sits there and at the
beginning, which I found by cleaning it first, right? Or I fixed that. And then there's something
with some of the lights aren't working, right? Because the game, the switch on the game over
relay isn't working. Right. Then I found that right. And then et cetera, et cetera. So I like
going through cleaning everything, checking everything out. I just went through and looked
at every thing in the bottom of the game. Um, so if there's anything majorly wrong,
I probably just caught it. Right. Um, the coin thing had to be redone. The ball count unit thing
had to be redone. I just like going through them systematically and messing with everything.
Some people don't like that, but that's how I do it. If you go through and you just fix this
problem, they don't, they're, they're not reliable. Something else pops up. You missed
something. Maybe you didn't, you don't notice that until you play a certain number of games
and it's on the third player, third, a hundred point score reel or something like that. So I
like to do it systematically, but what's going on is we're hitting the credit button right here.
And that is ultimately turning on the credit relay, the credit relay, a switch is closing on it.
That's turning on the coin relay. Okay. The coin relay or the credit relay, if it's
how this is set, um, if the game is over, turns on the reset relay to reset the game. Okay.
The reset relay, I switch on it, turns on the score motor and starts it turning. Now you heard
the score motor start turning when the score motor starts turning. Now all these are turning
and all of these. So as it turns, it turns on the number one score reset relay. It turns on
the number two score reset relay. That was that one switch that we messed with. Uh, and then it
turns here, turns on the credit unit reset solenoid. So what have we seen? I heard some
ticking in the background, which is probably these, right? And I heard, I did see that it
reset the credit unit. So it did that. Okay. Total, it clicks the total play meter. I don't
know if it did that or not. I'm not sure. Um, and then if the reset relay is in, this will be over
here. So it starts doing all these. So it clicks the coin unit reset solenoid. It clicks the ball
count unit reset solenoid. It clicks the game over relay latch, which is basically going to reset
the game over relay. Uh, and then, uh, through here, it's going to click the player up unit,
reset solenoid, and it just keeps going on and on. So there's all kinds of stuff. So we're
somewhere along this journey here. It ain't happening. The fuse just blew on the Captain
Look, the fuse just blew on it too. So we still got issues. Okay. We're going to figure it out
though. Um, so basically it's, it's getting halfway through the reset sequence and then
not getting all the way through my theory. My guess would be is that the game over relay is
not unlatching because it seems like it's still in game over because you can't hit the flippers
or anything. And it never says ball and play number one or any of that. So we're not getting
any of these. I don't believe, and this is drawn with the game started. So it would be like that.
And we were looking at something earlier. I think we, we may have looked at that wrong,
but basically this has to be connected for the ball and play lights to come on the player up
lights to come on. So we've probably still got problems with our game over relay, which I
suspected whenever I looked at it, cause it looks pretty rough. Um, but yeah, so that's what we're
looking at. So we'll mess with it some more next time. I hope you enjoyed it. That's our journey
through the bottom of this Captain Fantastic. Hopefully next time we'll get a little farther
along to where we can actually get the flippers working or something, but we'll see then. So I
hope you enjoyed it. We will see you on the next video.