Building the Catalina Wherry - Part 43 - Installing the lashing rails

Nomad Boatbuilding
98 followers
34 Video Views·Mar 17, 2024
My website: https://www.nomadboatbuilding.com
Instagram: https://www.instagram.com/nomadboatbuilding/
It's not about the money but living isn't free...
Here are some ways you can support this channel.
Get 5% off TotalBoat products here: https://www.totalboat.com/?sca_ref=3715732.xvvNNHFDPJ
Get 10% off Starbond Adhesives. Use the Coupon code NOMAD10
Shop here: https://starbond.com/discount/NOMAD10
Buy some merch: https://www.nomadboatbuilding.com/shop/
Support these videos with monthly or annual pledges at Patreon: https://www.patreon.com/nomadboatbuilding
Or make a one time donation: https://www.paypal.com/paypalme/nomadboatbuilding
hey folks welcome back to Nomad boat building today I'm building the Catalina wary we are back
working on the lashing rails now these are some wooden rails are going to run the length of the
boat that allows Joe to lash his gear down into the bottom so in the last video we made up some
wooden dowels to make those rails and we use the 7107 rule which is a very simple geometric trick
that we use in wooden boat building to turn rectilinear things into round things so for
spars and ores and all sorts of stuff like that so go back and watch the last video if
you missed it and pick up on that little trick cuz it's really really useful and I use it all
the time okay so this week we're just going to finish installing these rails so I was playing
around with this uh blocking here not sure how easy it is to see we can just imagine
the a stick on there just draw that in a little tighter I'll just draw I'll darken it up on one
side so there's our Center Line I think I've decided we're going to go
like like
this so that's all this is all waste this is obviously only half the the
image there so that'll be again against the hull this surface
here and that'll Park itself neatly into there get this lots of screw
holding power in here so I like the looks of that and i' I'm basically
working with whatever can fit into 2 in here I think that's going to be about
right putting a just a 10° bevel on the ends just for fun just for looks
do my first side and then I've got my fence here marked with
my overall length do it again I'm cutting these in
[Music]
pairs I get one more
out barely barely but I can
I cheat this just a little bit what we'll do is we'll put one of these over here or
[Music]
standof
[Music]
helmet all right I came up with a plan for this uh lashing rail so I'm making these
little blocks it's just got a little Groove here that uh marries up with the rail itself and each
one needs to get cut down a little bit because the the frame depth is not entirely consistent
all the way through and so I need to adjust the the height of each one as I do it so just that
I'd walk you through how this is going to happen and I'll probably just put a screw right through
these guys and into the blocking but I'm playing around with the idea of putting a strap over here
instead I'd have to do a different one for on the frames I kind of like the strap idea just because
it doesn't penetrate this so that we don't get any weakness in it at all but it's a question of
how do I make that strap or is there something commercially available there are some pad eyes
I could potentially use to go on here but they might be kind of ugly and then over here it would
just be a flat strap of some sort I think but that means fabrication so uh have to think about that
a little bit so these guys are being held down with these little uh plywood straps that I've
made I'm just taking my um miter Square here my combination Square drop it on top of my rail there
and that's giving me a height so with that height I take one of my blank blocks here drop a piece
of dowel on there drop my Square on top of that and then Mark the bottom of it for the height of
my finished block so let's go through making one of those right now so we've picked up our height
here on this and let's go cut a block out we take a block drop a dowel on there use the other ends
depths a bit better and I do my best to try and juggle this onto it with one hand we Mark our
depth like so me Mark our depth on there I can run it down the side if I want I don't I'm not going
to be using it like that but anyhow now we'll go over to the band saw and we'll set that up okay
over here at the saw I got the the table tilted so it matches this angle and then I'm using my
fence here on the opposite side in order to give me something to run this little block
against so there we go and I'm trying to leave a little
bit to dress off it's a bit hard to dial this
in that looks pretty
good
and then over here in the boat I just pop my rail up a little
bit slip the block
underneath there we go I got a little bit of wheel room and I think what we'll do is we'll
put this in with a good heavy peanut buttery epoxy and uh just get them all sort of parked
in here and just sort of sit them down I might even tape I might even tape this block right to
the rail so it pulls it up a little bit but we'll see I haven't really decided if that's the way to
go but for the most part that feels that feels really good back here I decided I wanted to run
this rail so that it sort of fell in line with this uh little detail here it'll look better if
it just sort of jives in with this think maybe I'll bring it down a here I had sitting it a bit
higher just for looks of nothing
else also I want wanted to raise this up here just to provide a little more foot room for
the for the uh foot brace for rowing and such and my biggest question here is exactly how I
want to tie this one in uh cuz I got a plank lap here to deal with which is a bit dodgy so I have
to take a few more minutes to sort of sort that out then the last one we'll do a block buted up
against this Frame here that this just terminates at I think so do two more don't quite know how I'm
going to do this so let's see if that is going to call that good there should bring it down a hair
maybe let's see all right while I'm fussing around with that rail I just want to take a moment to
thank all of my followers on patreon who make these videos possible this week I want to give a
shout out to G Goodman David Pierce Dan Walker and of course my most loyal follower of all Matt Evans
coock who makes a point of watching the videos both on patreon and over here on YouTube and
likes to comment in both places so if you've been enjoying these videos youd like to help me keep
making more please consider joining me on patreon you can find links in the corner or down in the
description
so that's
there this block is going to notch there I have to approach this one entirely different I
think all right let's see if we can figure this one out all right I don't like this I
don't like the way this overhangs the lap I think it looks really sloppy so I think
I'm just going to just chop this off just come straight up that's what I'm going to
do
sh
I think I came up with something that I like so I just sort of chopped one side off of
these guys so it just lands flush with the edge of the plank think that's going to look
okay um just need to do a little bit of rounding off around the edges of these guys
I think maybe I should maybe I should sand down that ingrain just a hair on
them I have to figure out how I want to glue them in probably something like a I think I might just
like use a combination of these guys maybe we do this in two stages that's probably a smart
idea use these guys to hold it
down get the blocks maybe taped onto the stick so
they just so they stay snug to it thick thick epoxy to
uh to give them the exact perfect M
mating
[Music]
is
this little notching now it's just just a tiny bit it's going to really
help to sort of lock these into the right spot make this installation way
easier
nice yeah that's
perfect
m
darn
it there's just never enough clamping
power
okay well I guess I'll uh play around with a couple more sticks to help sort of dial this
in maybe I need some rigid clamping blocks that would probably be smart little C clamps
all right we got all of our blocking in and I used all these little Shores here to just spring that
baton down into shape now I didn't record the uh glue up because it was just sort of uh it
was really awkward you were never going to see anything interesting but uh the idea behind the
shores is I could isolate the the little baton where I wanted it to and basically spring the
whole thing up out of the way in order to squeeze the block underneath and deal with the the tooling
out of all the joints and all that sort of stuff so that all works really well I can take those
Shores off so what I think I want to do I think what I want to do now is uh take the dowel here
I think I'm going to wrap a bit of packing tape around it in the locations where it's going to be
fixed and I'm going to um do a second glue up where I'm taking some thickened epoxy and I'm
just going to fill this joint here either side and create basically kind of a micro a little
tiny version of one of these but it's just going to be solid epoxy I we'll just put all this back
in I think I'll put a set this up to do the screws right away and I can and then once it's all done
I can just unscrew these and it'll all align we just do a little clean up of all the sort
of squeeze out clean up all the rough stuff I was playing around with how to fasten these and
I think I decided I'm going to do this just use a stainless steel uh round headed screw and we'll do
a little counter bore there so that it can sit flush and that way I get maximum holding power
without the risk of splitting this dowel open and uh it doesn't protrude it looks neat I tried using
finishing washers on here that didn't it looked terrible and um so I decided to not go with that
and I could do straps across here that might be the best way to go but it's a lot of work a lot
of extra work that I don't think is worth it so we're going to go with this little solution if for
whatever reason these don't prove to work in the long run I was thinking Joe could actually replace
this rail with aluminum get aluminum tubing and fit it in there okay this one off that's a bit
[Music]
better and just get some alignment
here okay we want to basically round off that
[Music] end [Music]
[Music]
now the other
[Music]
end
okay we
go all right into the
boat
up there
get a few props on to hold it in
position all right those are all tucked in where I want them now I'm going to um I'm
going to do some little tin some little pilot holes in each of these locations just uh the
way I like to do stuff like this is I like to do my first hole that is the core diameter of the
screw and um and then I'd follow up with my clearance holes and my counter syncing and
all that now we're doing a counter bore and for that I use a forcer bit and so I need a
a smaller pilot hole than normal so I think I'm just going to do like a I don't know a 332 pilot
hole or something like that something that's much smaller uh that the that the the lead uh spur on
the the Forester bit can follow more easily so that's my that's my plan there so let me
get that set up and we'll start drilling okay I've got this set up with um just a 33 second
bit and I'm going to just uh eyeball Center on all of these guys and square to the direction
that it has to pull in and I've set this drill bit up to be uh it's at as longest as as deep
as I can go on my shortest run so um I don't not going to worry about blowing through the planking
anywhere [Music]
[Applause]
[Music]
[Music]
[Music]
okay now we're going to do some counter boards on the stringers
here these lashing rails and I'm just marking the very end of them
with port and starboard stamps so that it is easy down the road to tell which one is
which okay I'm starting these uh with a forcer bit because uh the firster brid's
got a nice spur Edge on there so it'll cut that gray nicely but what I found was I
was drifting off a little bit because Oak is just such it's hard stuff and it really kind
of leads the bit astray so so I'm just going to get it going just a tiny bit cut that end
grain but then I'm going to come back and I have modified a counter sync by grinding off
the beveled end and creating a counter bore and so I'm going to be actually drilling these out with
the counter bore which is going to follow that little uh hole a little bit better that pilot
hole
[Music]
here
there we go
nice
that one run off no I guess not that one felt like it just was caring off the course so maybe I
didn't drill that one quite as Square to the stick as possible which is unfortunate you got to watch
it when you're using um tapered bits for this kind of thing they tend to want to grab and haul you uh
pull themselves through at a rather alarming rate you got to sort of resist them a little
bit okay let's get that rail
installed so I've put a big glob of peanut butter thick epoxy on all of the
frames now we're just going to tack these guys
in
[Music]
okay there we go now I'm just going to add a little more tension here
good
[Music]
all right and now now the trick is just trying to
well I'm not going to Tool this into anything that's
neat but what I am going to do is just try
and Tool all of this out so that it's got a uh sort of
a halfway control contr shape that I can work with after it's
cured
everything here is such an awkward uh shape that it's there's not very little I can
do
it's one of those dieses where you get to touch it like
once
so I basically glued it in although it's a not on purpose exactly partially on purpose but
um so in a nutshell all of these tabs I've created here are holding this in place so
I'm just going to peel back the packing tape that I've got holding the rail in
there
okay almost okay so now I should be able to yeah there we go pop
it off all this packing tape just that comes away that worked really
nicely okay I'll put this to the
side so now the trick is going to be how to deal with shaping all of
these guys down and I've already done the other side so I know where we're
going here uh let me just get a couple tools together and then we'll tackle
that okay to uh clean these up I'm just starting by leveling them
off I'm bringing them down till they're just a little
under half the diameter of dowel that's fitting in there and then knock off the
junk so what I'm finding with some of these is my epoxy didn't really fill in as nicely
as I would like right around the edges I might come back can do a little spot
filling so now I've just rolled the sides in a
little bit then I'm just grabbing some just piece of um sanding belt
here and I just start working these Corners
down try and fill in here try and get that sort of sanded out
smooth
and on some of these I'm have a little sloppier around there so I've got to
do a little extra work just to sort of clean up the face of the frame a little
bit anyhow it's a whole bunch more just like that just working away at it until I
got a nice smooth finish and uh hopefully I won't have to do too much filling to
sort of doctor these up it's a pretty small detail but I'd like it to be nice just the
same that's all there is to that that's going to go pretty quickly get all of them done and
I won't bother putting those rails back in I don't think until we're ready for
assembly all right folks that was the last job I wanted to do before getting the in
whales and breast hooks in and finishing up the sheer structure of the Catalina
wary so we'll take care of that in the next episode and I hope you join me again for out
folks
