Stumping anvils for a Blacksmith Weekend

Nomad Boatbuilding
98 followers
811 Video Views·Sep 16, 2024
All right, here we are at my friend Paul's blacksmithing shop. This weekend we're going
to be having a little private blacksmithing course from Ontario master blacksmith Sandra Dunn.
So I just thought I'd do a little walkthrough of the equipment we got here.
We've got a local blacksmith by the name of Benoit. I don't know his company name,
but he's making some really nice blacksmithing equipment here like this little
striking unit, whatever it does. We've got both a propane and a coal forge.
A little propane forge right here, a little crystal coal. A bunch of anvils ready to go.
I'm just going to make a new stump for this one because this stump's a little on the
wimpy side. It's kind of falling all over the place. Here's a really beautiful old
English anvil. That's a forged anvil. You flip that thing over and you can see the
folds underneath the bottom of it. It's a beast of a thing. I don't know what the story is behind
this one. Also English. A little Chinese one that I think Benoit or somebody like that is
making available. Maybe it's Alibaba. That's it, Alibaba. Yeah, so Chinese made one, but it's
actually pretty good. It was like 300 bucks delivered, which is kind of crazy for an anvil
that size. And another one of the same here. It's kind of on the go a little bit longer,
so they've proven to be pretty good. We've got the 2x72 belt sander here. We've got a
tower hammer. We've got the pneumatic striking hammer. We've got an induction forge, which
is not really working all that well here because this whole shop runs on solar. We should really
do some, fire this up and just cook some hot dogs in here. That'd be hilarious. There's Paul.
Hello. Making his way through, looking for something to fix whatever he just broke.
Strap the barbecue to the tractor. All right, moving on. We set the little chop saw there,
bandsaw, junky drill press that Paul's grandfather gave him,
bench grinder that really had to be bolted to something so it's useful,
big fixture table, four leg vices. And then up here, a little propane forge.
We've got a, Paul recently picked up this really nice old
Klauson lathe. So just to be able to do basic stuff. So what's really kind of cool about this
lathe is that Paul bought it from the son of the original owner who bought a brand new back in the
1930s or 40s. Got about this big post drill. Paul's going to fix him up. He's got a couple parts he
still needs to make to get that back up and running. And then Paul's wife, Shella, has got
her little workshop set up here. She's into coppersmithing. So anyhow, pretty good setup for
the upcoming weekend. And so I'm going to be spending today just kind of helping to
get a few things put together. So we're on a water access only lot. Of course,
there's no power to this lot either. So this whole shop is just running on solar panels.
So down there, you can see there's solar array standing in the field there. And the cabin itself
has got an array of panels on it as well. The whole shop is set up with VFDs. So all the equipment
that is in here is all three phase. And that's specifically to be able to use the VFDs because
on the solar array, it makes more sense than trying to go to a single phase apparently.
However, for the induction forge, that's the one thing that draws the juice so hard that it's not
really practical to use that. So I think that's going to go back to the city. I think the idea
was that the induction forge was going to be useful in the summertime when there are
complete fire bans on. Once there's a fire ban on, they're pretty serious about it here.
Because any fire to get started, you have to get put out by yourself.
All right, so this is the logs I'm going to be getting our stumps out of. And I came up with
this very simple little jig to try and get a square cut. So there's nothing to it. It's easier
been doing? Oh yeah, one bad axis. Give her a tip here. One thing I have noticed is if I
rotated on the ground, oh look at that, it even gave you a mark just like I was hoping it would.
That's a good job of that. I think you're still high here and here.
That'll be for the small anvil. It'll help a bit. It's that sapwood problem.
But that's horrible. And this one's not as critical. That's good. That's just the
ticket. All right, uh, give me a level on that. Go higher. Okay, so we got about a
three-eighths of an inch to shave off this high spot here. A quarter of an inch on this side.
Yeah, well, it'll do. The, uh, the rotty parts will fall apart pretty quick.
Sapwood will come off pretty quick. That's close enough to get us where we're going.
on. When we have the forge lit up, we'll forge a fourth one because the fourth one to come off
was just way too short. Okay. One down. One to go. One more town and one more show.
Oh, that's a pain in the ass. Royal pain in the ass. Jesus. Who thought that was a good idea?
Someone in China. Just like they got this really fat horn on here. Like that's almost useless by
its fatness. Yeah. You can't do anything round on it. And it didn't give you a flat landing on the
back. It's like they, it's like they referred to like some kid's book or an anvil pattern, you
know? Like this one's great. This one is just at the shipping limit, like 60 kilos. Yeah. And same
make, same ordering. The horn on this one is actually nice. Yeah. And this one's 10 kilos
less. Yeah. And the horn is shite. They could have made it 15 kilos less with a nicer horn.
So go figure. Yeah. There we go. Just need a staple to go on that one.
This guy's all finished up too. All right. We're ready to fire up the forge.
There's my man, lucky dog, Bob. Says I gotta have a dog in every video if I want to go viral.
This is Tilly.
You want me to throw that? That's what you want.
