One of the ways you can support our channel, is by checking out the items we promote on Amazon. If you purchase any of these items, or even follow the link, it pays us a commission. Even if you purchase other products after following the link it pays us a commission.
At the moment, we'd like to show you this beautiful Weller soldering iron that we use every day in our videos. The Weller adjustable temperature irons work better than cheaper ones because they attempt to keep the tip at a certain temperature, and are a higher wattage. This helps you get nice solder joints and makes it easy to do repairs.
These links below are to this product in various areas of the world, thanks for watching!
Check Out Our Patreon Account, for Unreleased Repair FAILS, Concise Repair Tips Not Possible In This Long Form Video, And 1 on 1 Repair Assistance with YOUR Project!
Our store is located at 139 Caldwell St., Rock Hill, SC 29730.
Ladies and gentlemen, this is Joe's Classic Video Games back with another cool arcade game
repair video for you this evening. This time we're going to be working on the original
Pac-Man 1980. This is a Pac-Man cabaret or some people call them Pac-Man minis,
but they had three Pac-Mans. They had the full size. This is a Ms. Pac-Man, but you get the idea.
They had the cabaret and then they had their cocktail. So you didn't see these too much
really. These were in, you know, bars and stuff where they wanted them to blend in and they didn't
want no crazy yellow cabinet or pink and yellow cabinet sitting around. So they made them wood
grain or in areas where they didn't have much room. This one's pretty beat up really. This one's not
ours. Guy dropped this off. He just wants us to fix it. He likes all the wear on it. You know,
tons of people played this thing. I wonder if the counter's working.
69,276 quarters, but that may have rolled over. Every time a quarter falls down and hits this
switch, it moves that. It's a coin counter. So I think he really likes all these stickers and
stuff on it. So we're not doing anything like that. We're not cleaning nothing up. All we're
going to do is get it to work. We're not messing with the sides. We're not messing with the control
panel unless we got to fix the buttons or something. Not messing with the coin door.
All we're going to do is get it to work. Okay. This guy, he don't want to spend that much money
because unfortunately he already overpaid for the machine. He told me what he paid for it.
And I'm just going to tell you, I think he paid too dang much. I think he paid way too much.
I'm pretty sure he told me he paid $800 for this machine. I think that's what he said.
I don't know. I mean, I've got a real nice one over here. I've been trying to sell for
quite a while and mine's like ready to go. It's got a brand new bezel on it,
brand new control panel overlay. I've rebuilt the monitor. I got the nice pretty blue T-molding on
it. The cabinet's in real good shape. I probably take 1200 bucks for mine and mine's, you know,
turn key, brand new buttons, lock, everything's ready to go.
And he paid eight for this one and now he's got to pay me to fix it. So
it is what it is. All right. Well, let's plug her in. I'm actually working on this pinball machine
here too, but I'm waiting for some part. Well, I'm really waiting on Ronnie to touch up the
play field. He's working on that right now. He's got about half of it done. And I'm also
waiting on some more light bulbs. But anyway, here's what this little baby's doing.
Almost seems like it's in test and the monitor's all misadjusted. So let's see if I could just
flip that little test switch here and see if that did anything different.
So now we're not making sounds. So that's good. So let's try to clean it up.
All right. Well, let's take off the back door and see what we're working with.
Have you seen those videos of people like working on cars and stuff and they don't say anything.
It's just the sound of the drill and stuff. And then they just go through and they fix it and
they never say a word. I thought about doing that with this one, but I don't know. I didn't
think anybody would watch it. Maybe next time. Well, we've got a G07, looks like.
Get you guys over here so you can see what's happening. I'll just bring you with me,
how does that sound? So we've got an original G07. We've got our game board here. Man,
those chips looked awful crusty. That's probably going to be much of our issue.
That one looks pretty crunchy. Those two there look pretty crunchy. So that's probably going
to be our issue. I'm going to see if I can adjust the monitor first, though, to see if I can
get anything on the screen before we go ahead and start taking that board out.
We also need to check the power, but I think we'll have bad ROMs myself.
Well, I adjusted the monitor a little bit and it's obviously glitched because it's got wrong.
It's got the wrong numbers on it. You can see parts of the maze. It actually tries to coin up now.
You can hear it play, but it's not playing right. And obviously the graphics are messed up.
So let's check the power. All right. So on a Pac-Man or a Ms. Pac-Man,
there's no power supply per se. It actually takes AC voltage from these transformers
and it turns it into DC voltage after it gets on the board. So the Pac-Man board itself
has a built in power supply, basically. But you still need to check to make sure you're getting
AC over to the board. So the best way to check that is on the side of the fuse holders.
They're pretty dirty, but see these four fuse holders right here?
We should have 24 volts AC if we check those two and 14 if we check these two.
See if I can get you guys set up somewhere we can see. Hopefully you can see that. That works.
Got this fancy multimeter. One of our viewers sent us this. That was real nice of them.
Trying to do it where I can stay out of your guys' way. So we've got 24.
Well, hopefully my arms aren't going to be in the way and you guys can see.
We've got 24 on these two, just like we're supposed to. We've got 14 on these two,
just like we're supposed to. So that tells us we've got a board problem, which
we pretty much knew that already. So I'm probably going to have to re-burn some ROMs.
So I'm going to take this board out anyway and we'll test it on the bench.
See if we get the same results and then I'll show you how we do the ROMs. How's that sound?
Okay. All right. I'm glad everybody's in agreement with me.
All right. So we got it back here on our test bench with our little JAMA adapter
and it's pretty much doing similar things. It's trying to boot. It's resetting and stuff.
We're getting the same weird numbers down here. It almost kind of looks like a RAM problem too.
So we may have a couple of different issues. That's supposed to be a crosshatch. See how we
got four? Well, we're all doubled up. A lot of times that's RAM issues, but we're going to
mess with these ROMs first. Just look how bad these are. And even if those did work,
I'd still have to replace those because those just aren't going to be reliable.
These three probably look like they're okay. That one, that one, and that one. But these three here
need to be changed. So I'll show you how we do that. These old midway chips like that,
once I take these out of the socket, the legs are probably all going to break off on these three
chips because they're just so old and corroded. But we'll see. I'll show you how we do all that.
I got to get my ROM burner set up here. Right there. All right. I'll be back with you when I
get that set up. Okay. So I took those three ROMs out and just as I thought, a bunch of the legs
broke off. I don't know if you can see that or not. Legs broke off all of them when I took it
out because they all basically rusted and fell off. Okay. So I've got this EEPROM eraser. If I
had good EEPROMs in there that were messed up and didn't have the right file on them, I could take
the little cover off of it, put it in here, turn that on. I don't think I've got that plugged in.
I've got too many wires around here to run. So see that light? That's actually going to erase
the EEPROM. Okay. So once you get it erased, you put it in your little chip programmer. This is
the one we use. It's an old one, but that's the ones we like. You can't do the real new chips with
this one, but we're not usually working on new stuff. We're working on old stuff. So this is
working perfect for us. So then we've got this little computer. That's the only thing we use
this computer for because it's got a parallel port on it still. And we've got this little programmer
on here like so. And you can load. Where's my mouse? I need 2532. Let's see. Tell it what
chip you want. 2532. Then you do a blank check. It's erased. So there's nothing on the chip.
And then you go. You load. Go to ROMs. And then we're going to go find Pac-Man. All the files.
All right. So which chip do we need? So this is row six. So let's do 6H. So then we find 6H.
Program device. Did not program. Sometimes it does that. Then you program it again.
Did not program. So that chip is messed up. That's the problem with using used chips.
So we're going to try one of our other ones that we are already erasing. See if
either one of these is even a 2532. Yeah, this is a 2532. So let's put this little baby in there
like so. Let's see if this one will work. This one's erased. Well, that one programmed. See,
a lot of times we're using old chips that we took off something and erased. And, you know,
sometimes we've erased them three or four times. They're not any good anymore. So I'm just going
to throw this chip in the trash so I don't do that next time. And somebody told me something
a long time ago. I don't know if this is true or not, but I just always started doing it.
Once you get it programmed, if you actually program it again, it makes it a stronger.
That may be crazy, but that's just something that I do. So I take this out,
make sure the notch is the right direction. Pop that little baby in 6H. It's better if you got
two hands so you don't bend up all the legs. Yeah, I might have to work on this a little bit.
These legs are bent to begin with. How'd you guys bend up all the legs? I told you I was using used
chips. You may be saying, well, why don't you buy new chips? I could do that, but I got used
ones. Why shouldn't, why wouldn't I use these? And the problem with new chips is a lot of people
sell fake ones. So you may order a 2532 chip and they send you a whatever Qingchong, Japanese,
Chinese crap that ain't a 2532. You think it's a 2532 until you spend about an hour
messing around with it. And then you determine that the chip must be fake.
So that's the problem with the new chips. So we got that one in. I'm going to do the same
thing with the other two and then we'll try it again. All right. I got the three ROMs changed
and we're going to try it again. Looks like we still got some issues.
It looked like a RAM problem also earlier, but at least we're, we're booted this time.
So now we've got some RAM problems, looks like, and we may have a color problem too, but we'll,
we'll figure that out. So most of the RAM is over here. Um, it could be this RAM bus controller,
RAM addresser. So I'm going to try another one of those first before I go too far. And if that
don't do it, I'll have to break out my, uh, ABC one, two, three kit. Okay. Well, I changed the RAM
addresser board. Yeah, buddy. I think that's going to do it. So this is a little RAM daughter
board sits on there like so, and it's got 10 RAM chips on it. And one of them must be messed up.
I've been, these things go bad all the time. I'm not all that great at working on boards,
but I have messed with a lot of Pac-Man boards and anytime it's a double image or, you know,
there's two sets of them or the maze looks weird. I always kind of think it's usually the RAM
addresser board and they're pretty easy to swap. I had a whole stack of them. I'm running out of
tested working ones though. I'm sure you can buy new ones, but I got about 10 broke ones.
One of these days I'm going to go through and try to figure out which RAM chip it is. It's bad,
you know, but for the sake of time, I'm just going to put that one on there, put it back in the
cabinet, try it all out. And then I could call the guy and he can come pick it up. And then I can
move on to something else. And one of these days when I'm not so busy and I'm in the right mood,
I'll go through and try to fix some of these because I've got 10 or 15 that are broke now.
Add that to the pile. All right, we're going to go put it back in the machine.
Well, we got the board back in. It seems to be working just fine in the cabinet,
but his monitor's not all that great. I don't think that's going to adjust out. It needs a
cap kit, really. But, you know, this guy don't want to spend that much money. And I hate stuff
like this because he probably thinks I'm going to try to get one over on him, you know. I'm going
to tell him, yeah, your board needed work and your monitor needed work. And, you know, a lot of
people don't believe you. But that's the good thing about the YouTube videos. I mean, you see
what I'm doing. The guy's going to watch the video later. So it needs a cap kit. That's not going to
adjust out. And even if it did, these freaking caps are so old. I mean, this game's 46 years old
now. So I'm going to take the monitor chassis out, change all the capacitors. Okay, we got the
monitor chassis out, spider and all, cobwebs, everything. So if you've watched the channel,
you've seen me do this a bunch. But basically, I'm just going to go through and change all these
capacitors one by one. They're all different values. One UF, two UF, 10 UF, all the way down
to 2200 UF. So I'm going to take them out one at a time, change them. I'm going to reflow the header
pins because they get bad solder. I'm going to look at her to see if I see anything else wrong
with it. But it was working, but the capacitors are just getting weak. And I was more concerned
about that bow than anything. Did you see that big wave or bow in the right side of the screen?
That wasn't going to adjust out. That's a capacitor problem. It's kind of like your air
conditioning unit at home. Have you ever had the capacitor go bad in your AC? Well, these are just
miniature ones. And they're only rated at so many thousand hours. And they're old, ready to be
changed. So that's what I'm doing. So we don't really charge by the hour, we charge by the job.
So I gave a guy an estimate on the job and, you know, I never go over my estimate. I don't care
what it is usually. Sometimes, you know, sometimes it needs a little bit more work than I thought it
would. But that's on me. I don't go back and say, well, it's going to need this, it's going to need
that, it's going to be an extra $400. I have never done that and I never will. So whenever I give
him an estimate, I know a couple things going to pop up that I didn't expect. That's just the
nature of the game. And the reason we don't do it by the hour is, you know, I can cap a G07 probably
a lot faster than most people can do it. And just because I got good at it and I can do one in 15
minutes, you know, I don't think I should be paid less. Have you caught a plumber lately?
I caught a plumber. He was at my house for five minutes and he charged me $250. Can you believe
that? I could have done it myself. But geez, I do everything myself. I've been trying to get to a
point where I could hire people to do things. But Jesus, everything's so expensive now.
Our prices are very cheap compared to most businesses, I think. But, you know, our overhead's
pretty low. It's just me and Ronnie. We're not driving brand new Denali's like everybody else is
apparently and they get a new car every six months. Maybe that's stupid on my part, but I
don't do that. Everything I got is paid for. It's old. Just the job done. So yeah, I get kind of
people arrange what it's going to be and, you know, sometimes, you know, I got a little wiggle
room in there and I like to come in below what I tell them it's going to be and then everybody's
happy. But sometimes you can't. So on this one, it's going to come in pretty much right at what
I told them it was going to be. I was hoping I could just burn those ROMs and be cheaper than
what I told them, but I can't do it on this one. Maybe on the next one. Y'all let me put that in
upside down. These type of repairs are kind of our bread and butter. This is what I do most of the
time. A lot of them I don't even film because I try to knock them out in a day and it'd be
something simple, you know, cap kit or power supply and something like that. And to me, it's just not
all that interesting. Like this Pac-Man. If you've watched our channel, we've done so many of
these Pac-Mans. I hate to do another one, but it seems like we're getting new viewers and it seems
every Pac-Man I do gets more and more views because it's the most popular game of all time.
Yeah, if you bring a game here for repair, you're going to get a solid repair.
We're going to do what it needs. We're not going to do anything more than it needs
and you're going to get a fair price. That's just how it is.
I see these other people repairing stuff. Not necessarily arcade games, but
jeez, I feel like I'm in the wrong business. I should have went this. I should have been a plumber.
I think that looks a lot better. Not too many people work on arcade games. Some people say
they work on arcade games, but they don't. Let me move that monitor up a little bit.
Little Mr. Pac-Man. All right, control panel back on. Some of those pinballs
we work on. Good thing we don't charge. Well, good for the customer that we don't charge by
the hour. We mainly do it by the job, but jeez, some of those pinballs take forever,
but Ronnie kind of enjoys working on them too, so there's that. It's kind of a hobby slash business.
Probably rambling on too much now. Adjust the monitor up a smidge because the credits
cut off a little bit. Did that do it? Oh yeah, I think that did it. That'll be fine.
All right, you ready to play Pac-Man? Do we need more volume so you can hear? Let's see.
It might be too loud. We'll leave it like that.
Looks good. I don't really typically chase the ghosts. Sometimes I will on one of the first
levels, but yeah, it really ticks me off when I hire somebody to do a job, which I rarely have
to do because I always have to do it myself, and they tell you a price, and then once you commit
to the price, they start doing the job. Well, it's going to be this. It's going to be that.
Nothing can make me madder than that, so I don't do it. I don't do it to anybody else. That's
a crappy thing to do, in my opinion. You bid the job low to get the job, and then once you get the
job, you raise the price. That's screwed up. I should have went down there and got them guys.
I started thinking about a story, and then I got distracted. I'll tell you what happened
yesterday. You know, we run a game store, and we sell all the old stuff,
so I sold a guy a Wii controller. He was in his 60s, probably. He was in good shape. Older guy,
and he starts texting me later on. He can't get it to sync with his system, which I kind
of taught him how to sync it before he left because that's kind of a problem. A lot of people
don't know how to sync their controller to the system, so you got to hit the red button on the
controller. I'm talking to him back and forth. We text back and forth for 10-15 minutes,
and then he gets it synced. Then he's messing with his console, and then the eject button gets
stuck. I'm trying to walk him through how to get the eject button fixed on his Wii,
his Nintendo Wii console. Remember, I only sold him a controller. I didn't sell him a console.
He already had his console. The eject button was stuck, so I'm messaging this guy. This is an old
man. I'm going back and forth. I spent probably at least 30 minutes talking to this guy,
texting back and forth, and finally, he gets the eject button working.
So now he's got the Wii that he bought somewhere else where he's had a long time,
and he got a controller for me yesterday morning. He's got the controller synced up. I talked him
through how to fix his eject button that I didn't even sell him. I'm just trying to be a nice guy
helping this old man out with his Wii. So he gets the eject button working,
but then he determines that the Wii is bad. It doesn't read a disc, okay? So after I talked to
him for 30 minutes back and forth, showed him how to do this, fixed his eject button basically for
him, I think I'm being a real nice guy helping him out doing all this and that. He says,
well, can I bring the controller back? I mean, come on. How do you think about this? So I wrote
him back and I said, well, I don't think that has anything to do with the controller. I don't
feel how that warrants a return since the controller works fine and your console is bad,
but you do what you think is right, and I haven't heard anything back from him yet.
So if he brings the controller back, I'm going to give him his $20 back,
but I think that's a pretty crappy thing to do. You know how many things I've bought that I,
you know, didn't work right or didn't need or decided I didn't want after the fact? Well,
that's on me. That's just, I don't know. I guess I'm just weird. I'm old school, I guess. I don't
know. I don't take nothing back unless it's just the biggest piece of junk you've ever seen.
I try not to return anything.
And then there's a big difference taking something back to Walmart and then
taking something back to a little mom and pop shop. That frustrated me. I did nothing wrong.
I sold him a good quality product. He got it home. It worked fine. And then his console is bad and he
wants to bring it back to me after I helped him out for 30 minutes and fix his eject button.
So basically I would have lost, you know, an hour's worth of my time and didn't gain anything.
That's just, I could go on forever. There's lots of things that I just don't understand.
People come in with their drinks and all the time, and then they're in here for two seconds.
You got a trash can? Gee, thanks. Thanks for bringing your trash in the store.
At least pretend like you're going to buy something for a little bit first.
It's just constant. It's constant, guys. It's constant.
Then I'm the bad guy. Then I'm the jerk. I'm going to get some good comments on this video,
probably. It's strange going into a retail store and then throwing away your garbage.
But anyway, the game's working good.
We fixed the heck out of this Pac-Man. You liked that, didn't you?
Thought they were going to get me. Oh, come on. They got me that time.
Got a little too close. Got a little too cocky with it.
No, I didn't even bother. I didn't even bother chasing them on that one.
Oh, I knew that was going to come back to bite me. I didn't do very good. Let's try again.
I had a couple men I just ended up throwing away there. I like to get to 100,000 anyway.
I play Ms. Pac-Man more than I play Pac-Man, but it's the same. It's the same thing. The mazes
just change on Ms. Pac-Man and the fruit's a little different.
We don't get regular Pac-Mans in as much because usually they turn all the regular
Pac-Mans into Ms. Pac-Mans. The operators did back in the day anyway.
I hope you guys can see okay. I know there's a little bit of glare, but it's in the middle of
the day. I got the sun coming in the back. Nothing I can do about it. Boy, this thing plays good. I
think the guy's going to be happy with it. Top of the line. Didn't want to risk it on that one.
That one either. I want to get to 100,000.
Wasted that one. He was going to beat me to it. Probably shouldn't have went that way.
Pulled it off though. It's supposed to do that. It's not a glitch. Oh boy.
Dang it. I wanted to get that. Crap. I got too focused on getting the little guy there.
Oh well. We got three, man. You think we're going to get to 100,000?
I don't even want to bother with that. Whatever.
Don't make that money. Boy, this thing plays perfectly.
Cabinet's beat up a little bit. It plays perfectly. This is the fast speed Pac-Man.
That's what I like to play. Once you play the fast speed, it's kind of tough to go back to the
normal speed. Almost messed up because I thought somebody was coming in out there on the sidewalk.
We made it to 100,000 like we wanted. See? I shouldn't have said anything.
Little Mr. Pac-Man.
Don't forget to like, comment, and subscribe. I got to talk to you guys. It seems like
over half of our viewers aren't even subscribed to the channel. Come on now. You can't watch the
video and then not even be subscribed to the channel. It doesn't cost anything. All you
got to do is hit the button. It'd help me out. One of these days, I want to get to 100,000
subscribers, but I don't even know if that's ever going to happen. Our subscribers go up super slow.
I don't usually ask very often. Come on. Help me out a little bit.
I just wanted to go down there and get a couple more points and go back.
Doggies. Starting to get a little cray-cray now. Get that key. Always got to get them keys.
150, aka Ferrari. Oh boy. Well, got a little carried away. I was starting to get a little
too cutesy with what I was doing. Could have probably got to 200, but I started messing around,
doing a little chucking and jiving. It didn't even turn, I don't think. See, I got the
pellet. It didn't even turn. Oh well. That's going to do it for this one, guys.
See you on the next one.