Thank you to everyone who has been supporting our channel! If you use the link below before you purchase anything on Amazon, we get a royalty for sending you there, thank you!
Our store is located at 139 Caldwell St., Rock Hill, SC 29730.
ladies and gentlemen this is Joe's Video
Games back with another cool pinball
repair video for you this evening We're
covered up in pinball machines right now
We've got them all over the place
waiting to be repaired Uh but we we've
been working on the Scotlib Jack in the
Box pinball machine It's next and we're
focusing on it at the moment So we did a
video where we kind of looked over the
condition it was in and worked on the
mech board in the bottom We did another
video where we uh it has a bunch of
scoring issues So we worked on the
player unit in the back and um it's
still got the scoring issues We we've
been fixing things as we go and cleaning
things as we go along So in today's
video hopefully we can get to the bottom
of the scoring issues by working on the
bottom of the playfield here where there
is a bunch of relays and there's a big
drop target bank and all kinds of stuff
So I'm going to go ahead and start the
game again and show you what it's doing
and then we'll work through
it And
uh one
two three It just reset the drop targets
three times So that's an interesting
thing somebody pointed out in a previous
video Um let me show you about the
scoring and then uh we'll work through
why it's doing what it's doing So when
you shoot the ball it hits this
switch It's a lane switch or whatever
they call that one And then let me show
you what it's not doing and then we'll
try to work through and fix that little
by little So this says 50 points or 500
points when lit If we were to do the
unlit
one the score motor
turns but nothing scores And it even
turned off the light So we've got some
issues
there If it lands in the uh the kickout
hole it won't kick out I think this is
problems with the score motor So now
right now nothing's scored So when the
drop target goes down the 100 point
light goes on but it doesn't score
anything So if we lose the
ball dead in the water So this is one of
the issues that the gentleman was
mentioning um that it's been doing So
let's see if we can figure that one out
first What do you think uh so you saw
the lights were on it killed it Once it
lands in the kickout hole it won't kick
out the ball Um these say 100 but
they're not scoring anything Nothing's
scoring anything And when the ball lands
an out hole it's not doing anything So
that's our first symptom we'll try to
repair Okay So I think why it won't
score is because of this We messed with
this on a previous video So I'm just I
have left it exactly where it
was but if you look here at this row of
switches it's not in the right place
Basically that
little piece there is supposed to fall
down into that hole but it's it's it's
supposed to be out here in the middle of
the hole not on
that See how it's risen
up so it's effectively opened some of
these
switches that need to be closed to score
points Basically they have it set up so
that as the score motor's
turning you can't score more
hits It's just because they need that
for the timing and and all kinds of
things like that Um so that's why the
playfield's going completely dead Um the
kick out hole on the on the um
playfield cannot work while the score
motor's turning And essentially the
score motor is turning because it's up
here on this lip
So if I just mess with it a little bit
it'll probably fall back down off of
that
little So So it's so it's going around
like this and when it gets to that hole
it falls like that But what's happening
is instead of it stopping there it
continues to
go and
stop right
there So we need it to stop earlier So
what makes that stop well we worked on
it on the first video It's this brake
here That's part of it at
least But I must have the wrong
one Yeah So right there at that spot
this brake that we put in isn't even
touching this bar There's a bar that
goes through that looks like this that
goes from here to the plate below And
this brake isn't even touching it So the
brake is set up so that it's going to
catch it Maybe something like that which
is what's going
on So we're getting here and the brake
is bent out and touching
it So I've got the wrong one on there
This was broke on the previous video Let
me see if I've got a smaller one
Um or maybe we can just make that one a
smaller one And let me see if I can look
online and see what that thing's
supposed to look like All right So I am
on uh Marco Specialty's website They've
got a lot of pictures of uh parts you
can order and things like that Pinball
Resource has a lot of pictures of stuff
online too as well that they sell Um but
they didn't have a picture of this uh
piece this brake switch But this is what
we need So the one that we had on there
was this
one and it is actually a little bit
longer and it doesn't have the bend
quite the same So the one that we need
to put in there is this one Now this
one's the correct bend but I put this
together wrong I was I was messing with
it earlier Whenever you buy it it
doesn't have the wafers but it looks
like they're using only
one which if you think about it that
would move it back a little bit which
would make it stop do the brake thing a
little bit quicker
Also I'm going to look it up just to
make sure but that little that little U
bar whenever it turns around hits right
here It doesn't hit here So this doesn't
this is positioned how it is So it's
turning this way the bar will hit here
and then push this out of the way And
once it gets over this this kind of
throws it along If you were to have it
this way whenever it turned it would go
down in there and then have to fight
this to go up you know So I don't think
that's the way it goes but I'm going to
check that to make sure You'd think I
would know that Well I do know that but
I'm I'm just assuming that So I haven't
actually looked at one Um because I'm
always fixing I'm always replacing them
when they're broke and they're not there
anymore
So let me see if I can find a drawing or
something that shows
it All right There's this guy on YouTube
He He's pretty cool but he talks a lot
that he does all these videos on old uh
got em machines Let's
see Joe's classic video games You should
probably check him out Um I don't think
I subscribe to him or anything but I get
sick of his crap But uh there's one that
he showed in a previous video You can
kind of see how it is And yeah the way
it's mounted there's
only one wafer and then the the bar
right so that's in a out of
sight Here's the same guy He really does
work on a lot of these Here's another
one This is a a 1973 Pro Football You
can see the same
situation And then this one's
interesting It's a 1974 Big
Shot And on this one you can see that
it's bent out of the way But if you look
real
close you can actually
see that it is curved the way that we're
talking about You can see the end of it
right there Um so maybe it overshot on
that video a little bit So anyway so
that's where that's the way it goes And
I have made
this where it's going to move it back a
little bit and it's the correct one So
that should solve our problem with it uh
continuously getting to a point where it
won't score at all and it won't kick out
of the
hole I've turned it back
on So we'll we'll just do it by hand a
few times Now it's it's powered so it's
going to do its
thing Okay So see how it stopped now at
the beginning of the little
divot so it's stopping there instead of
stopping way up here you
know
Three
four
five So every time it's stopping in the
correct place And if you watch the
little brake action you'll see
why See it's catching it
It's like it's running by and it's going
"Oh hold on a minute Hey slow down there
Hey don't do
that." All right So uh I think that will
fix the situation where you end up in a
place where the uh the eject holes won't
work So we'll keep our eye on that just
to make sure I showed you the part
number If you have that problem open up
your playfield and see if your home
position is homing right All right so uh
let's uh look at the 50 and the 500
point thing Let me try that again just
to make sure that didn't fix that I
don't think it would have And then let's
see if we can figure out why the 50
point and the 500 point won't work right
All right so it says 50 points or 500
when lit So the 500 if you hit it listen
what happens
Nothing Have we still got the same thing
going on all the lights are on this time
Let's see if
the Okay Yeah Hear how I hit that and it
just turns on for a
second And then this
one Okay So the score motor is starting
and
turning but whenever whenever you hit
it what's going on is the 50 point and
the 500 point relay isn't holding itself
in It's closing and then opening back up
And it should never do that It should
pull in and then hold itself on while
the till the score motor starts I'm
pointing at the score motor under the
playfield Until the score motor starts
and does its thing But even if you do do
that it's not scoring the points It is
somehow giving us 10 points every once
in a while Um so none of that is scoring
So let's see if that's just because
they're dirty and need cleaned or what
the deal is So let's find those All
right so they're actually in the bottom
and we've already messed with them So
there's the 50 or 30,000 score
relay and then uh the other one is there
next to
it the 500 or
300 score
relay I've already cleaned those and
adjusted switches and all of that Um but
yet we have the same problem Let me see
if I can rig it up where I can hit the
uh the switch on the playfield and see
if it um makes either one of those pull
in All right so we're
watching this one and this
one Your guess is as good as
mine Yeah it did pull in Now here's the
other one It pulled in as well
Okay So interesting Let's see if we can
tell on the schemat I don't have the
schematics in yet but I might be able to
figure it out by finding something
similar Um let's see if we can figure
out on a schematic why that is doing
that and um what is not holding it in
All right So on the side of the
cabinet there is a little label on most
of these Gotlibs that tells you what all
of the score motor switches actually do
And it's a little confusing if you're
not familiar with it but if you've
worked around the schematics a little
bit you you'll understand what some of
this is And so it just it's an entire
list of all of the
um switches Now another thing that's
very confusing about this is if you look
right
here if that'll focus for
us So it's saying motor two right it's
and it's pointing here and it says
number two Well it looks like they're
showing you switches that are pointing
this
way that are pointing this way but
they're not They're showing you the
cutout in the metal
frame on the score motor So if you look
at the score
motor it's kind of hard to see
but like see this cut out
here That
is that right there So they're actually
it's just showing you how the thing is
is made And so this switch stack here it
doesn't point that way it points this
way So they don't have the switches
drawn Those aren't the switches Those
are the that's the hole in the plate of
the thing It took me forever to figure
that out cuz I thought "Oh they they're
drawing it backwards or whatever."
They're not It's just they're drawing
the holes in the frame So this is these
are switch two
right and if you look on
here it says motor 2B Oh you know what
i've got my focus autofocus turned off
That's why it won't
focus That ought to be better There you
go Just disregard the rest of this video
That was blurry Motor 2B It says inside
switch I J P O U B X and W relay lockins
And then it says second switch C and D
relay
lockins Okay So you saw what was going
on these relays wouldn't hold themselves
on
Um right So the the switch would turn
the relay on but then the relay is
supposed to hold itself on Well even
even though there is a switch on the
relay that it holds itself on with it
eventually goes back to a switch on the
score motor So if you look on schematics
they have all of these areas and these
score motors drawn up up the tower uh or
the ladder that lock things on I'll show
you on a regular schematic So this is a
Spirit of 76 schematic By the way if you
need schematics for your machine uh you
can get some from the Pinball Resource
go to
pbresource.com They sell schematics for
all of them including this one that
we're working on But if you look on
these you'll see these motor switches So
that switch there motor 2B when that
opens nothing drawn on this side of it
will work And if you go up here there's
a bunch of them motor 1D motor 4 A motor
1 A So it's just it's how all of that
stuff is held on uh when the score motor
is turning
So all that to say if there's anything
wrong with those two switches tons of
your relays aren't going to lock on And
there's one of those switches it tells
me only locks on the
two relays that we're having trouble
with What were the odds so the
playfield's kind of in the way but stack
2B is this one down here And there are
two switches on it An inside one and an
outside one And boy that outside one
don't look all that hot
Um wish I could get some better light on
this subject Maybe if we light it from
below Maybe if we light it from the side
That didn't help at
all All right So I have
turned this so that you can
see the actual
contacts So this is
set one
here and they're making good contact But
if you look at the outside switch which
is the one that
um is relevant to our CND look the
blades bent And I already cleaned this
so I should have found it the first time
but I
didn't See how that blade is bent right
there and if you
look see how it's
moving that's because it's not actually
touching the other contact So that
switch is misadjusted So I'm going to
clean that readjust it and then we'll
see if that gets our 50 and 500 and 3
and 3,000 points working All
right 50 or 500 points when
lit Well that's better
Oh I like that All right So 50 points or
500 when lit This will work because
they're they're going to use the same
exact relay since the score is the
same That fixed all of our 50 or 500 Now
this says drop target score 50 points or
500 points when lit So that may have
been why our drop targets weren't
working Or maybe
not Okay that one
did Okay that one
didn't All right Very cool So this one
doesn't light up the light when it drops
And a couple of them didn't score That's
going to be dirty contacts on the drop
target unit We'll do a whole bunch of
stuff on that Excuse me
Um so that is
working That is working All right So now
we've got the the lit holes So these do
50 or 500 These do 50 or 500 Let's see
if this middle one does
500 It does
So if you read
around there's really not that many
things uh that you can score differently
Everything scores 50 or 500 depending on
if it's lit except for these holes So
the holes score lit hole scores 3,000
points and lights the 10 times bonus So
I'll bet the unlit hold is the one that
does the
300 Yep Okay Now let's do the lit one
Yep All right So one switched fixed all
of the scoring
issues That's pretty
wild I never would have guessed that it
was one switch but it was one switch
Okay Um and it did light up the 10 times
bonus value by landing in the lit hole
Um you know it's not alternating though
The same one has stayed lit the whole
time
There we go Okay So what I did was I hit
the 100 points and eventually it made
the light jump over to the other one So
let's see if the other one scores that
now Should be
3,000 And it was okay So maybe the 100
points
um is what makes that go back and
forth Yes
And it's kind of working but kind of
not So let's see if they've got that on
the match unit or something I don't
think they do cuz there's not
enough Yep they probably do Okay See
this switch on this match unit which we
haven't cleaned yet If you've been
watching the videos that switch if it's
connected or open a lot of times is what
they use to change that So I'm just
going to move that by hand that relay
and see if
that does what we're talking
about Awesome
How cool is that okay so every time you
score 100 points on the 100 point relay
which is
M there's a
switch that turns
this And so the uh the AX unit right so
this is used for like the match and
things like that That's what the little
PCBs are for on the side So you might
think well you know who cares if my
match works properly i don't care if I
win a free game at the end It's just a
home use game etc etc Well they have
that extra switch on
it and there's a little cam that closes
it and opens it closes it opens it each
time that it turns And that switch is
used to turn on the alternator relay I
think that's what it's called So let me
lift up the playfield and I'll show you
that little relay under there All right
So that is the alternating relay That's
the one I believe that we're talking
about So let me try moving this switch
and see if it turns that
on
Yes it's in It's out And as that
moves it moves which lights are lit up
right so the alternating relay itself
going in moves the light And then if you
go back one step that little AX unit
moving moves the alternating relay which
moves the light And if you go back a
step before that when you score 100
points it's going to it's going to the
bell's going to go off When it's when
you score 100 points it makes the AX
unit move which makes the alternating
relay move which makes the light move
And if everything's not clean it gets
stuck like that So that's how that works
All right
So obviously we have to clean all of
that stuff So we've got to clean all
those relays but I want to show you the
drop target assembly
Um a couple people have been mentioning
this and
um talking about you having to rebuild
it and all of that I'm not going to
rebuild it because it's got 10 targets
already in there the gentleman has
already replaced them So unless there's
something that's out of whack and it
looks like he got them in there pretty
decent I'm not going to rebuild it We
are going to clean it though So I'll
show you how it works And then I want to
talk about why the um thing resets three
times at the beginning of the game which
is just crazy You wouldn't think that it
would do that Um but it does I show I
showed that at the beginning Um so I
want to talk about that and show that
And but I just wanted to illustrate
that we fixed all of our scoring issues
with one switch So sometimes the the the
problems seem very complex but it's it's
actually very simple And what did it
cost us to fix the scoring unit the
scoring
problems nothing Didn't cost a penny It
just all you had to do is find the right
switch So in that way EM are better than
the newer ones because it doesn't cost
anything to work on them usually
Sometimes you'll have a burnup coil or a
relay or something but even if you do
it's you know it's 15 20 bucks In
general it doesn't cost much to work on
them unless you're talking about
cosmetics Now the cosmetics cost a
fortune New back glass $300 or
$400 Repainting the cabinet is going to
take you 50 60 hours of your life So I
mean you know there's plenty of of money
involved But if you just want a player
like this one is it doesn't cost all
that much to fix them if you know what
you're doing So um you can see that
there are several switches here on the
drop target assembly So if I push this
one back
up it gave us the points on the way up
If I put that push that one back up that
switch is now open So one of these
switches is going to turn on the
light And one of the switches I think
there's another on the
back is going to actually score the
points Okay So this one you notice that
they're on that they're stuck
on Um am I right about that
these are connected when the thing is
down So these are the switches that turn
on the
light And if you're worried about me
getting
shocked it's the light bulb circuit So
it's six volts You can't hardly feel it
And then the um you can't fill it period
And then the other voltage for the coils
is um like 25 volts I'd rather not get
buzzed by that either but it's not that
big of a deal Okay Um so these when
these switches close you actually are
turning on coils So this is on that side
of it right so these actually can shock
you Um but if you
look I mean it won't kill you You'll
just you'll it'll tingle a little bit If
you look they're all open They're not
actually closed I wish I had something
laying here I could touch it with Let me
touch it with my
finger I'm going touch it in the back
Okay here we
go Here we go Are you ready i think
you're ready So this one is down See how
the drop target is down but
look the switch is the switch is not
connected Why is that it's because when
the drop target falls it actually hits
the switch
that turns on the 50 or 100 point relay
or whatever we were talking about 50 or
50 or 300 relay or the 50 or 3,000 relay
whatever it is Um it turns on that relay
which holds itself on That relay starts
the score motor The score motor turns
and it goes to the the five bumps on the
the bottom cam down there and gives you
your 50 points right so it's it's
essentially like a playfield switch
Whenever you hit a playfield switch you
just hit it momentarily You don't it
doesn't hold on These have to hold on
though to to light up the
light So most scoring switches don't
actually stay down They just touch you
know it's a momentary thing Um and then
the momentary um action of the switch
lock uh turns on the relay which locks
itself in long enough for the score
motor to do what it does So
um yeah So pretty cool So we're not
going to re we're not going to
disassemble it and reassemble it because
we he's already got them in there pretty
good They look good to me But we'll
clean all the switches and everything
But let me show you why it resets three
times at the beginning of the game If we
go back to our motor switch positions
cheat sheet here on the
side you see motor 1B third switch
resets target
bank So there is a switch on the score
motor that resets the target bank So
what happens is at the beginning of the
game the start
relay comes in and starts the score
motor
turning and then starts resetting
everything Right so the start relay is
it down here is it on this
one these are the reset
relays Here's our start relay But it
basically it trips the reset relays and
it starts everything doing its thing
right and so it needs to do a a few
things It needs to reset this bonus
unit I keep forgetting we're live here
We're all the way
live Adds bonus score Right Needs to
reset that sucker
It needs to reset the drop
targets and it needs to reset the score
relays and it needs to reset the player
unit So it's got to get everything back
to zero It doesn't have to reset the
match unit where with the the
alternating thing So sometimes whenever
the game starts the lights on the left
will be on Sometimes it'll be the ones
on the right or whatever because it
doesn't that's unnecessary but it does
have to put all of the drop targets back
up because it's just a design feature
that they've decided to do There were
some games that had holdover features
where um if you know you're trying to
accomplish something on the playfield it
would just leave it like that for the
next player or the next uh um the next
person that walked up and put a quarter
in Um but on this one they chose to make
it where the drop targets reset And one
of the reasons they did that I assume is
because they have no way of knowing
if the drop targets are
reset Think about it How do they know
that that one switch or that nine of
these are down and one of them isn't now
there is a little setup here that can
tell when all of them are down So you've
only got a few switches on this thing
You've got these ones here that just
momentarily hit to score the points And
then you've got all of these which light
up the lights Well watch what happens
when I drop this last one with this
switch So I'll focus in on it See how
that's open right now and it's gonna
make a bunch of noise when I drop this
last drop target Watch what
happens See how the switch
closed so that switch closes when all of
these are down And if I go back you'll
see when I push one of them up you'll
see a bar in there
move and it pushed that back up Right
There is a bar in the in the uh drop
target unit and Gotlib made different
sizes of these So there's three four
five 8 10 whatever You know they were
the king of the drop
targets Um so there's a bar in there
that when they're all down that switch
uh will close But that's no good on
resetting it because if only if nine of
them are down but one of them still up
Are there nine even one two three one
two three four five six seven eight nine
10 Yeah there's 10 Um if nine of them
are down and one's up that switch
doesn't
know So it has no way of of knowing how
many of the drop targets are up or
anything because all all these switches
that are closed all they're doing is
lighting up a
light
Um that differs from like the score
reels Whenever it resets the score
reels when it gets back to zero it can
close a switch or open a switch or
however they want to do it right so it
can tell if this has went back to zero
It can tell where this is because it's
got all these rivets You know it can
land on something and connect a couple
things or it can open one of the
switches on the back whenever it gets
back to zero or it can close a switch So
they have ways that they can do it They
could have designed this like that too
but they just chose not
to right it would have just made it more
complex So to to overcome that what they
did was on the reset
uh relays or the start re I think it's
on the actually on the start relay Um
and I think it's on the P relay whenever
it changes player add player unit relay
We messed with that in a previous video
Um whenever that comes in
uh they just have it wired to reset the
the uh drop target unit when the score
motor gets to a certain spot and hits
that switch So as that turns during game
play this won't reset because it only
resets when the add player unit relay
pulls in or the start relay pulls in Um
well since they did it that
way what happens is at the beginning of
the game the score motor keeps turning
and turning and turning and turning and
turning because it's trying to reset all
of the score reels and it's trying to
reset the player unit and all of that
Well it just happens that with the start
relay in and the the or the add player
unit relay in it's in a long enough time
that that turns and hits that switch
three different times in that time
period So it resets it three times And I
guess they were thinking they could have
done it a different way They could have
put it on something that only hits once
or something But if they did that they
wouldn't know for sure that the thing
got
reset But by designing it into the the
the start relay or the ad player unit
relay
um they if they know that if it hits it
three times then they're definitely all
reset So it's just it's just a design
choice that they made At this point they
were putting all kinds of stuff in the
games but you know they still had a bill
of materials and they didn't want to
just add relays in for no good reason So
maybe they could have if we thought
about it enough there's probably a way
you could have done it but at the
beginning of
the I don't know we we could probably
design it Maybe you could put something
on the bonus unit where when it gets
back to zero it resets them or something
But
um regardless that's just that's just
how they chose to do it So I'll uh we're
in game play now We can end this
ball It will count the bonus
down and then we'll watch it while it
resets the
uh the relays I mean the the drop
targets So to end the ball you would
land in the out
hole If I can do it without
electrokilling myself What do you think
is that on the coil voltage that's
probably on the coil voltage isn't
it i do that all the time though So I
guess it doesn't
really I guess it doesn't Let me just
put my hand on the where the ball goes
If I get electro killed y'all saw my
best
video Okay So this is going to the the
add player unit doesn't happen until
that switch gets
hit It kicked me It tried to kick me
over to the to the out lane Okay So if I
hit this trough
switch well it must have already did it
because they're
reset When it kicked the ball it reset
them Now when I hit this one the add
player unit is probably going to reset
them
again Yeah it's because of the freaking
score
motor right so let's do it again while
we watch while we watch the score motor
this time Okay so we scored some points
We're going to land on the out hole
Please don't break my hand Mr Hole
kicker Please don't break my hand Come
on now Don't elect her Don't electro
kill me All right So we're going to land
on the out
hole All right So one time uh when it
kicked the ball over to the out
lane and then one time whenever the the
uh add player unit relay comes on So I
guess it's two times between balls and
three times at the beginning of the game
because they've got the S relay doing it
as well So we have this gentleman's
Royal Flush in here that we're going to
be doing soon And check this out It has
a nine drop target
unit I wonder if there's two like if
there's a three and a six or something
See how they have it split there on the
playfield so I haven't messed with it
yet but
um very
similar setup I would
presume And here are the schematics for
Royal Flush You can see it says drop
target bank reset Now keep in mind there
are two coils on the drop target
bank And uh on this side they're
connected to uh AC One of the other
things that's interesting about this is
these are big old AC coils so they're
running on 120 So they're on this side
of the transformer They don't those two
don't run on
25
Um they go back through
fuses and then they get to here and
motor switch 2C that's the one we were
just looking at Uh whenever it closes
that's what resets them right and then
it gets powered this way through either
the P which is the change player relay
or the S which is the start relay
The start relay can only send power to
it though if the first ball relay has
tripped So you have you can't just start
the game and then restart the game Um
it'll only do it whenever the U relay
has
dropped
So I wonder why though we're getting why
are we getting it why is the P relay
coming
on anyway you get the whole purp you get
the whole bit of it If we had the
schematics yet we could we could go by
and show the exact setup I'll bet it's
just like this though But um it's it's
essentially doing it three times because
it's a
dumb it's a uh what's I don't want to
say dumb design It's a it's a beautiful
design but the it's a there's no
feedback in the design So it can't tell
if it worked So it just does it three
times to make sure that it worked All
right So here's those switches
underneath it And you remember a couple
of them weren't
scoring And if you look like look at
this bad
boy Let me see if I can do this
without without it doing it real
quick Oh if I can find the right
one We're getting
there Okay So you see as it drops
there's a blade on the back of it that
makes the switch touch
And that
one it's not quite touching Oh it looks
like it's trying Oh it wants
to So see how it's making the big blade
move but the small
blade never in fact moves That's because
it's not quite touching it
So to fix the scoring on that one really
going to take a lot of a lot of effort
We're going to have to do one of these
numbers Now see this little stiffener
here You don't want to bend that where
it's just shorted to the other blade all
the
time All right
We're going to have to mess with it a
little bit Sometimes you have to take
the switch all the way off to rebend it
So
basically this needs to be bent It needs
to be straight and then it needs to be
bent down here at this end so that it
follows that
stiffener and sits you know more like
that It's just back too
far So because of that it never actually
hits the switch You also have to make
sure the contacts are clean Um and
that's just simply why I wasn't scoring
All right so that's more like
it And there's kind of a if you get it
where it's too close what'll happen is
the drop targets won't drop all the way
They'll they'll like drop like that and
then get stuck
So it has to have a healthy gap on it
but you don't want it to be um so far
apart that it isn't actually
touching All right So we do we still
have another video to go I I uh it's not
100% yet There's still a whole bunch
more stuff to work on but I did kind of
want to play it a little bit and just
see what the problem are the problem
areas are
Um the alternator thing is not going to
work perfectly We already saw that We
still need to mess with that
Um drop target should work pretty good
All the scoring should work pretty good
This customer doesn't want us to do the
playfield He's already done a lot of
that himself So um we're essentially
doing the mechanical stuff not a lot of
cosmetics So we'll see where we're
at There's our uh 10 bonus value when
lit Ball and play one Ball and play two
Now the bonus unit I haven't rebuilt yet
I think the
flippers it would serve a little
better You see how they're they're a
little bit too high let me show
you Okay so they've got the flippers
adjusted a little bit too high They're
supposed to be a little farther down
um they should they should kind of
mirror this line here and this paint
line here So they're just it's just a
little bit but they're a little bit too
high And that actually hurts your your
power because you like basically you're
trying to you're trying to bring the
ball You just you don't have the same
leverage since you're since your angle
that you want is from here to here
Whenever they're up
higher you don't you don't have a bunch
of power there If whenever you're down a
little lower you fling it more right so
it makes the flippers a little stronger
They're a little bit weaker because
they're so flat If they were perfectly
flat they'd be weak as hell It's just a
thing
Um on some of the games that we've
worked on
before some of the designers and you can
see it on like the the flyers and things
some of the designers actually actually
uh designed the flippers to like hang
crazy low because that you actually get
more power out of them that way And it
also can make a like on a wide body it
can make a wider shot But with the
flippers it it sounds counterintuitive
but it's true With the flippers more
straight you don't have the same amount
of power because of the angles of what
you're trying to shoot So if you're if
you're right
here you can only shoot like this
right so to go from here to here from
here to here which is more traditional
shot it's just hard to get any power
with the
ball It just doesn't work right If we if
you're down a little farther you're
throwing the ball farther It's just
a physics people It's physics Somebody
can correct me if I'm wrong I'm not
ball in play
four All right let's see if we can get
some drop targets and then see if the
bonus is actually
working Wrong side
Okay so we should get
three Yeah the b the bonus ain't working
right because u that bonus unit hasn't
been cleaned yet
I had one of these many years ago It was
before I started filming videos and I
really enjoyed it
Um I repainted a lot of the uh the art
on the
playfield and I re I remember thinking
that it was one of my
favorites Um it's just a great little
game Even limping along like this one's
been
doing This is this is a significant game
We had one person uh reply in our
comments on on one of the uh previous
videos that we've done on this one so
far that in his opinion it's the best EM
So that's just one guy's opinion But
this is a fun damn game So we'll be back
next time We'll get into it a little
more But if you want to see another
great fun got pinball eminball machine
we'll put the video up right here Hope
you enjoyed it There's still more to go
on this one We'll see you on the next
video