Thank you to everyone who has been supporting our channel! If you use the link below before you purchase anything on Amazon, we get a royalty for sending you there, thank you!
Our store is located at 139 Caldwell St., Rock Hill, SC 29730.
ladies and gentlemen this is Joe's
classic video games back with another
cool pinball repair video for you this
evening we are working through some of
the stuff in our back room some of the
really cool games that we've got in and
this is a repair that we're doing for a
customer it is a Aloha pinball machine
wow golb Aloha I've never messed with
this one before these are my favorite
type these ones that I haven't seen
before that obviously have a lot of
character to them
so someone has repainted this I kind of
like how they did it I don't know how
similar it is to the original paint
job um but it's pretty cool so it's
a Hawaiian theme I would call
that right pretty cool it looks like the
back glass has a little trouble going
on the the hoola dancer unfortunately
has
leprosy we see that a lot on those back
glasses we'll see what we can do with
that um and then here is the cabinet the
Playfield actually looks to be in really
nice shape which is kind of common from
this era a lot of them are pretty nice
this one appears to be that way we'll
set it all up um but yeah the cabinet
has been repainted at some point it
looks like it was a while back though so
they painted it white and then they put
a black splatter paint on it which isn't
really super correct I don't think but
they did a pretty good job I mean you
know uh and then it's got some kind of
like mold or rust or something on it it
look kind of looks like
rust so I don't know what that's from
but these things um they get beat up a
little bit personally I don't mind that
at all it's just part of their character
and their history um you can see that
this front door has been banged up
pretty
bad and it's been repainted you can see
the rust under it
so not a super restoration or anything
but they've been keeping it going now
there's some
yellow overspray here where maybe that
was on a different game even I wouldn't
be surprised if that was on something
that was yellow and they pulled it off
and put it on this because they needed a
lock down bar um the bottom of it is in
nice shape very
solid and then the head here is in nice
shape too um if you look at this
that crack there I'm wondering if maybe
they used some filler on it when they
painted it and the filler has cracked it
almost looks like
Bondo um but all in
all it's in good shape now the legs have
the same rust on
them you know you would we would call
that rust on a metal leg but I don't
know what you call it on the cabinet
when the wood's doing it but it's you
know ultimately that does even matter so
these are some legs that they painted
white you can see the same splatter
paint on them because whenever they
painted the cabinet the legs were on
it um there's different levels of
restoration I don't even like using the
word rest restoration for what we do um
typically I would take the legs off when
I paint it but I don't really hate them
for doing it the thing was probably
really rough and so they did this and it
came out looking pretty decent it's at
least presentable and that's the level
they took it to a lot of people would
take it to a much farther level and go
all in on it um but it would take you a
lot more time and a lot more money too
but this is how they chose to do it so
to me it's always interesting just
seeing how these games have survived and
what's happened to them over the years
and what the owner chose to do to it and
all of that so um like seeing one with a
kind of custom paint job like this I
think it's cool that's what they chose
to do and the thing made it it's here
right now and it's going to get fixed so
that's pretty cool so it's a two-player
game um what we'll do is we'll go ahead
and set it up um I'll put it on a cart
get the legs on it and we'll go from
there all right we've got it up on its
legs now the front legs are bent all to
crap but they are what they
are okay so the most important thing
about this one is the back glass we're
losing the back glass
if you now that I can see it it's pretty
rough so it's flaking right now big
portions of it are trying to come off so
this is already
gone you can just see there's several
areas that are have like significant
paint flaking
off um so we're going to try to save
that as best we can by clearing
it it's just a shame because it's a
really beautiful
back glass I just hate seeing them
whenever they're start falling apart if
you look on the
back we took the door
off it's just a shame but he it happens
it
um the reason that happens there's all
kinds of stuff that does it but the main
reason that happens is if you leave it
somewhere that's not air conditioned or
um and by air condition I don't
necessarily mean an AC unit I just mean
that the the um temperature stays the
same so it's heated and cooled basically
you know um what happens is at in during
the day it gets hot and then at night it
gets cold and during the day it gets hot
cold hot cold hot cold and goes back and
forth back and forth and the glass
actually glass actually stretches and
contracts just a little bit in the
temperatures but the paint does even
more so you they they
contract and Shrink or Shrink and expand
at a
different um rates and so it makes the
paint just pop right off the glass and
now somebody has touched this up
before you see right there where it's
been touched up so whenever we we're
going to clear it to try to save all
this but whenever we do it's going to
lock that in so that would it's pretty
close it's not it's not uh too bad but
that they won't be able to remove that
anymore that'll all get sealed in
whenever we seal it so hopefully we can
we can set save most of this I don't
know how much how easily we can get it
out of there without a bun of it
dropping off but we'll we'll do what we
can the Playfield itself like I said is
in pretty nice
shape there's a little bit of wear
but um looks like that they've cleaned
it up a little bit and put a ring kit on
it I think Joey mentioned that we don't
need to do the Playfield I'm going to
ask him about it tomorrow we got to do
something with that back glass though or
it's going to fall
apart um and they wrote the price on the
apron that's kind of
funny but that's cool okay so let me
take the lock down bar off and the glass
out and we'll slide this uh Slide the
Playfield up so we can look at it I
wanted to show you something else the uh
um balls plate unit here the
little thing is missing but it was down
inside of it
so that at some point has popped off and
fell down into the bottom of the
cabinet so I don't know what the problem
was that um the customer was
experiencing but that could have been a
big
deal we'll look at the schematics see if
we can figure out what that would have
what kind of problem that would have
caused 1.1 Point 100 Point relays
pretty
cool want to hear the
Bell
Aloha and then this is a Clapper over
here
um and only six score rails
yes all right so uh let me slide the
glass
out so there's a little paperwork in it
um where the gentleman bought a rubber
kit from Marco Specialties in
2003 so uh 22 years ago Marco was
selling stuff for it so we've got you
know it's fairly minimal inside some of
these there's not a ton going on we've
got a uh the hold
relay has been deleted so they just
removed the
relay and kept the switch closed we're
going to leave this how it how all this
stuff is because this isn't our machine
and it's working how the customer likes
it so you know it's not not for we're
going to fix stuff but we're not going
to add in missing stuff or anything like
that but the the the purpose of that
hold relay is um so that I believe we'll
look at the schematics if we've got
schematics but the uh whenever you start
the game if it's in the middle of a game
whenever you start it up that that relay
will throw you into game over so it's
not completely
necessary wow I see some interesting
stuff all right so we've got the score
motor we got this big relay
Bank um extra shoot relay that's coin
stuff player button re replay button
relay coin shoot relay add five red
bonus
relay T relay B
relay this is likely some kind of hold
relay too L relay F relay it looks like
this has been sitting a while in my
opinion maybe out in a shed or something
add five yellow bonus
relay um and then here under the
Playfield you've got two stepper units
those would be the bonus ones yep the
red bonus unit and I guess that would be
the the uh yellow bonus unit there's a
wire broken off that must go on that
switch we'll figure out what that does I
love finding stuff like that and then
looking it up on the schematics and
seeing what problem that would have
caused yeah that's just interesting to
me and then whenever you fix it you go
wow it had that problem but now it'll
never have that problem
again um the pop bumpers of course
there's a lot actually on the bottom of
the Playfield that's not in the bottom
of the
cabinet um so we've got here as well
there's a switch
that's bent out of the way that should
be over on this part I would think or
maybe
not U no I think that's actually how
it's supposed to be it's just weird
because it you know it's over on the
actuator part if it was in there it
would
never actuate it so and they've got
screws in it so they must be mounted in
the holes that it's supposed to be
mounted in two
flippers uh the two pop the two
kickers uh the two bonus ladders
it looks pretty good looks very
fixable all right so let me see what
else is in
here okay so I guess we'll start in the
back box then um I think maybe the first
thing we'll try is just putting this
piece back on and seeing if that was the
whole problem if the thing actually
limps along and
plays um after this is back in you can
kind of tell where it goes too on this
particular one because there's only one
set
screw and there was a
flat on the shaft
so you
know I don't know for sure without
looking at the schematics but it sure
seems like it goes right
there what do you think so maybe we try
mounting it on there and seeing if the
thing will play like that um obviously
it needs a lot of work um um and we'll
just plug the Jones plugs in without
cleaning them or anything and we'll just
see if the thing will do anything like
that because that's probably how the
gentleman had it at his house I talked
to Joe
about what the gentleman said and he
said that um there was a guy that was
repairing it for him but the the guy
passed away or went out of business or
something and so it's just been sitting
for a long time
um so I I hate the the other thing we
got to do we're going to have to do
something about this back glass I hate
that that's just driving me
crazy I feel like uh paint is flaking
off while we stand here but let me get a
little the Allen key so we can mount
this on there and see if the thing will
start at least um with that just
reattached okay so I plugged the Jones
plugs back in didn't clean them and I
line that up with the um the rivets I'm
not even sure that's that it goes on
those first rivets I'm just assuming I
don't have the schematics to figure it
out but um and it seems to Step Up um
we'll just leave it like
that sometimes on these if you reset
them whenever they're at zero it some
things don't completely reset or it
seems that way uh we'll leave that alone
okay so we'll just try to start it I
plugged it
in all right I dropped a pinball in it
let's see if it'll do
anything I've got it plugged
in nothing I wonder if there's a power
switch on this I don't believe there is
H well we have bigger fish to fry then
don't we maybe we should drop a coin in
it with our
Hand by the way this will get you
shocked it doesn't want to
cooperate some Pinball Wizard I am I
can't even get a credit on
it and we're just dead hm maybe there is
a power switch
somewhere well there's no power switch
that I see there's a ground wire that
someone's
added I see some of the strangest stuff
in these games sometimes and then it
goes back
there and it's just
unhooked
um so I wonder if we got a fuse problem
or what's the deal what is the deal
people I got tape on The
Wire there's a there's a inline plug on
the
wire all right well let's see if uh
remember this one doesn't have the hold
relay
let's give it a little a little
help dead as a door now uh let's try the
Tilt
relay we're dead nothing we got
nothing okay well we need to measure
power coming in so let me get a uh m a
multimeter and we'll see if we're
getting power into the cabinet or
not all right I wiggled the power plug
and something reset so uh I think
we're up and
running that's a shame about that back
glass okay uh let's oh you know what
since that doesn't have the hold thing
it's going to start in the middle of the
game because of where we left the ball
and play unit right let's see if the
flippers and everything will work right
now oh no they won't on this one because
we've got the play field up uh um H okay
let me put the play field back down see
what we can get happening here all right
play Field's back down let's see if we
can just restart it by hitting the start
button now that we have
[Music]
power this is why I like completely
working through them first so that you
don't have them limping along like this
it's already back to
zero ball and play
one lights came on the Playfield ball
was kicked down
out we're able to lift it up into the
shooter
Lane this is going to be a fun
[Music]
game now a lot of people are going to
hate it because it's got the wide
flippers but oh well just deal with it
it did go to ball too and it is
scoring so I think you may have been
able to get the thing limping along just
by replacing the uh the ball count units
cam on the back that had fallen off but
obviously it needs a bunch of
work so we're going to go through it
and get everything doing what it's
supposed to
do oh a gobble hole I forgot about
those I love a gobble hole a lot of
people hate them so on on certain games
the ball goes in the hole and it's
gone gobble
gobble but I think I think it's a cool
feature all
right okay yeah so it is actually
working it's limping along
so it could have been fixed by just
replacing um the cam on the ball count
unit but I think if we work through it
we can get this thing playing much
better um even looking better after we
mess with this back glass a little bit
and
um you know basically get the service
done to it that it's going to need to
last
another many many years
hopefully so I think next up we're going
to go ahead and pull out that back glass
um and try to save it you can see from
the back just the the general condition
you can
see that's what we're trying to
sa all right and there was actually
there's a nap napkin in here I don't
know what maybe that was up here so the
glass wouldn't hit it there's supposed
to be like a little foam piece there so
maybe they put that in but it's just
this is horrible
horrible okay so I need to take these
brackets off and then you can carefully
lift that glass out the back but I I
still got to be careful not to rub more
paint off when I do
that okay so we were able to get it out
without any more going you can see that
someone has touched it up before but
unfortunately they didn't clear it
before they did that um so the way we're
going to do
it is we're going to use triple
thick this is like a pottery
glaze you just spray this on here
everywhere stuff's
flaking uh from a distance because just
the aerosol will blow that paint off of
there so from a distance and you're just
basically trying to make a pool of paint
of glaze on it and then we're going to
carefully lay Saran Wrap over it so that
we can push the paint back down onto the
glass so that it'll hold and then put a
weight on it weights on it so that it
will hold it down um and that's really
your
only that's all you can really do way
back in the day people used to just use
packing tape to do the same thing this
one's extreme though this one's really
really bad unfortunately um I'm not even
going to clean it we're going to clear
over the dirt and everything because you
can't if if you try to clean that
everywhere you clean it paint's going to
come off so we're just trying to
mitigate how bad the thing gets and then
once we do this it'll stay exactly how
it is now um and it won't get any worse
um and it'll at least save the backglass
where it's at least somewhat usable for
the gentleman all right so I'm going to
spray this on and uh we'll get started
on the Saran WRA all right so I'm
literally going around with my hand and
pressing the paint
down
flat you're you're breaking it whenever
you do that but you're you're hopefully
putting it in the place that it
goes right and since we have the Saran
wrap on
it you can do that without getting it on
your
hand because if I was to get it on my
hand you know when I lifted my hand up
the paint would just come right
off all right so you just got to go
around and do it all like that and then
put a weight on
it uh basically I sprayed so much triple
thick on it that it's wet and I'm
pushing that paint down into the triple
thick and then if we put a weight on it
it'll stay like that while it dries and
then when the triple thick dries the
paint will be stuck in it so that the
best thing you can hold it down with if
you've got the whole thing covered now
sometimes you're just doing like a
little spot so you end up where the back
glass is all wet but you've only got a
little spot that you're actually using
Saran wrap on um but if you if you're
doing the whole thing like this the best
thing you can hold it down with is just
another sheet of glass it's perfectly
flat it's heavy um you're we're making a
glass sandwich
here so I'm going to let this dry for a
couple days it's Saturday evening um
Monday we'll uh we'll take this off and
see how much of that wants to stay put
it's so bad I'm probably just going to
do a second coat and try it again if it
doesn't all lift off with the Saran Wrap
so whenever it
dries when the uh when the uh if you
don't get too many wrinkles in the Saran
Wrap which you know
but whenever it dries and that paint is
stuck there the Saran Wrap will just
peel right
off sounds crazy but it's a thing all
right so I'm I'm probably going to put
even some more weight on top of it and
then we'll let it sit
here um over the weekend and hopefully
that'll at least save what little bit of
paint's left in those bad areas and you
know this this makes perfect sense this
is a it's a gotlib game that was made in
Chicago and uh Pac-Man was a b game that
was made in Chicago you know there's a
there's an upright Pac-Man right there
all these were made in Chicago right
down the street from each other it
should it it wanted to help so I said
sure thing
Pacman so we'll see if it'll help uh
save the glass all right so the glass is
still drying it's cold this is a cold
time of year so I put the paint on so
thick that it's been a day and a half
and it's still not dry so we're going to
leave it alone I took a vacuum and
vacuum CED up all of the extra
stuff um and so now we're ready to work
on it a little bit the first thing I'm
going to do is I'm going to clean those
Jones plugs that I was talking about
someone has already done it but I'm just
going to run a little bit of light
sandpaper over to clean them up a little
bit more make sure everything's good and
get that out of the way and then I'm
going to um take a a um flat file now
not a real harsh one you want one that's
just barely got any kind of grit back in
the day they used to clean these with a
business card like a little piece of
card so you don't want anything that's
going to destroy the contacts or
anything but I'm going to go through and
clean those
contacts on the relays here in the back
box you can see how they're
open and then they go in and
close that's what we want so I'm going
to clean those they' been setting
forever um and then we've got the three
up here going to do the same thing it'll
be a little harder to get to but they're
right
there and uh make sure that everything
is clean and making good contact now
whenever the big blade hits the smaller
blade it should move it a little bit so
I'll give you a good example this one
looks like it might be adjusted
out so see this this one's real stiff so
it's not going to move but uh maybe
we'll look at this first one so this
small this big blade here when I move
this in this relay in it should move
that smaller blade just a little
bit right it's kind of you can't really
do it like that too you got to kind of
do it down here where it's going to do
it
mechanically these got lib ones they
have such a short throw it's just they
don't move much but it is barely
moving um and so you just go through and
check stuff like that so if I find
anything interesting I will show you so
I got those clean and I got those clean
everything seems fine so I've moved on
to this uh 0 to9 unit now the 0 to9 unit
um is usually used for match but it's
it's
actually sometimes used for other things
too so there may be Playfield features
uh that they need some kind of
randomization on that they're going to
use this
for uh and it's similar to this one but
the the difference is this one just
moves in one Direction so this goes over
and over again in One
Direction and when it does that there is
a slapper a Clapper down here that just
hits the
bell every time that it
moves if you do it slow it just barely
hits it but it does it kind of violently
whenever the game's doing it
piece of paint from the back glass
that's fun okay so I'm going to clean
all of these rivets um to get that nice
and
clean and then I'm going to clean this
and put it back now because it it goes
in One Direction it doesn't really
matter where you put it because if it's
like in the wrong spot it could always
move it right so you know
what I'm gonna get dirt all over me I
better take off my
watch this way I get my watch
off okay so I simply shined it up with
some uh very fine
sandpaper we had people complaining
about that if you don't like doing it
that way you can do it the way you want
to do it you know um but that's how I do
it and then I put a little bit of Super
Lube on
it synthetic grease this stuff is great
it's dialectric that's what you want for
this particular application
and the reason you put that is because
it doesn't necessarily make the contact
from the wiper to the pin any better but
it makes it where it turns better which
uh you're trying to combat friction
there and from the factory it came with
a little bit of that on there it wasn't
that exact stuff but something similar
all right so we're going to put that
back on there now if you want any of
this stuff by the way we have a page on
our website go to Lions arcade.com
there's a parts page up at the top and
we've got a bunch of links to stuff like
this that we use in our repairs and our
in our videos uh that's on Amazon so if
you click the link it takes you to
Amazon and it gives us a little tip for
whatever you buy on Amazon so we
appreciate everybody that does that but
uh I'm going to put this back on now
make sure whenever you do this too that
you clean the bottom of the little
snowshoes as I call them um and then uh
I'm going to bolt it back on and
basically I'm just going to line it up
with the rivets but it doesn't matter
which where it's lined up because again
and it just steps in One Direction over
and over again now on this one it does
matter because it has to reset to zero
we'll mess with it next so I got it back
on there there is an
adjustment
those uh there is an adjustment there
where this will turn from one end to the
other if you loosen these screws right
so you can turn it about two you know
two rivet positions there if I was to
turn it all the way this way it would be
on that rivet or maybe even a little
farther and all the way that way it
would be on this rivet or maybe even
down below it so there's a heck of an
adjustment there um to get you how you
want to be so I just put it near the
middle um and so it's on the rivets now
it's going to ring the
bell and see how the other ones are
lined up on the
rivets perfect that's what you
want perfect so I like that and uh that
should work really good now on the back
of that unit there's some gears and the
um the lever and everything there was
Grease on those and it's still on there
everything was working good so I'm not
even messing with that on this one it's
a little different because there are
some switches back
there so we need to look at those so
here is the back of this ball count
unit um here is the switch so you can
see that this post when it gets to zero
is going to open that switch
right and close that
switch easy peasy let me see if I can
get it to do
it kind of hard to do it withth it
sitting out but that's how it goes so it
is back to zero it has closed that
switch and open that switch so that's
how you want it so I'm going to clean
this to make sure that they're making
good
contact um but in this generation of
gotlib usually the all of this stuff the
grease is fine in my
opinion now there is a stop right here
this thing will break sometimes the
purpose of that is whenever this goes in
that bar touches that stop right um that
will break sometimes where you need to
replace it sometimes even the coil Mount
up here will break there just lots of
stuff that
can be replaced but usually I don't have
to worry about the grease
um so it appeared everything was working
fine on this but we'll uh like I said
we'll clean this and then we'll clean
the rivets on the other side like we did
with that
one all right so cleaned it up and put
the dialectric grease on it now the like
we mentioned earlier um as it steps up
this one can step up with one coil and
then it resets with another coil so
because of that it is important where
this is Mount mounted because there's a
home
position um so if if we had the
schematics I don't have them yet but I
guess I could look on a on a u a similar
era
but basically you can tell by looking at
the schematics where the first position
is or you know where it resets to zero
but and it will tell you like basically
what wire it's connecting to what wire
and that's how you can tell where it
should be and plus it's kind of common
sense like this first set of
rivets is the first set that it could
possibly be on so that's probably the
home position you could have a situation
where it actually goes past that to
where it's not on any rivets and that's
the zero position but um I guess it just
kind of depends but this thing is nice
and working perfect or it appears to be
working perfect we still have to test it
it seemed like it was already um but I
think his main problem was that this was
missing but we're getting it now where
it's going to be reliable so it will uh
like I just moved it off the rivets by
screwing with it
is that
loose oh it's cuz I pushed it in you
know what look it's too far out I'm glad
I looked at it okay
so if I push that in what happens is it
pushes the gear in on the
back right it shouldn't be like
that there so I need to loosen that back
up and tighten it more flat I shouldn't
have that play right there so good thing
I touched it that's why I always look at
every little thing just try to catch
every little possible it' probably work
fine like this I mean it work did
earlier but it's not quite exactly how
it should
be all right so you can see that I
pushed it
in now you want a little bit of play
like
that because if it's too tight it'll
bind
right
perfect
perfect all right um so we did the Jones
plugs we did the relays we did those
relays we did the 0 to9 unit we did the
ball count unit or the balls play unit
on this machine uh that leaves us with
the coin unit or the replay unit replay
unit
um or if they have
disabled they've disabled something over
there
and I got
something they got something
disabled they didn't how did they set
this up on free play what did they
do
uh yeah I'm not sure how they did the
free
play
maybe when it gets back to zero
there's something going on up
here let's use a
light I can't make out what in the world
they
did oh okay they disconnected the wire
that would dis that would
uh looks like they've disconnected the
wire that would
open when it got to zero so where are
those wires
I can't see what they where they did
it I'm going to win another award for my
filmography here I guess it's that brown
wire there next to it that doesn't make
sense
[Music]
H well they have done something to put
it on free play so but
we'll the whole thing is they usually
this is disabled in some way so you go
through it and rebuild it but it you
know we're doing this for a customer so
you don't want to change his setup here
okay folks so next we're going to do
these score reels these are this is a
really good design um these things are
just
beefy they're made really nice it has
this kind of brass
looking metal I don't know that it's
brass though
um I see the rainbow effect on
it so it's like zinc or something I
don't I'm not the one to ask but uh it's
very heavyduty and nice and got laus
that for a while on all of their metal
stuff you can see it even the
Bell okay so uh the first thing we're
going to do is we're going to take these
three screws out step one now when you
do step
one this little retaining ring will come
off now notice there are six holes in
that and they're all the
same so it doesn't matter what how you
put it back
on and then the score reel itself comes
off now it's important that it knows
where nine is zero is where nine and
zero is basically so the way it does
that is this thing is keyed so you see
the six holes in
here but if you look three of them in a
triangle triangle are the same size
those are the ones that the screws go in
and then in the other triangle this
one's small this one's small and this
one's
big so that's how they key
it now under that is this little disc
here and this is used to move around and
contact different traces on this board
this also has to be in a certain order
but again they
have three of the screw holes in a
triangle are the same size and then in
the other triangle you have one two and
then one's
bigger so those two are smaller and that
one's
bigger and that's how you tell how it
goes back on now if you look on here
they mount to this little
nylon
Cam and you can see the three screw
holes in a triangle and then you can see
the other
three and one of them is bigger it's
kind of hard to tell though to be honest
you have to look really
close
so that is one of the smaller
ones and that is one of the smaller
ones and that one is
bigger so they're little
nipples and so you got some a
cups and then you got a C cup C people
there's nothing wrong with me saying I
don't know why you would get upset about
that I was very respectful about the
boobs like I didn't say nothing
disrespectful at all you can't get mad
about
that okay so the next thing we're going
to
do
is this cam see how that pointed part is
like pointing right there I'm going to
push the coil in and move it one
spot and by doing that I made a little
bit more of a gap here here that's
important I'll show you why um and I'm
going to take this screw and this screw
loose there is a nut on the back and a
washer to hold them in place all right
so I took them loose and because I had
that cam turned the way that I did where
it's a little more flat towards that
post you can actually kind of just
shimmy this off of that post you see
what's going on there I took it out from
that where it slides in the joint the
only way you can do it is cuz that
thing's turned a little bit if I turned
it one more that point would be right
there and it would be a little bit too
far that way now you can take this out
too but it's just a little more
complex depends on how far you want to
dis disassemble it as
well now here is the
coil and when it pulls
in see how that
works ain't it beautiful what a
freaking cool mechanism
that's what turns the score Rael so
every time the squore pulls in it turns
that score
Rael now you'll see this switch here
opens that's called an end of stroke
switch they're calling it The Lock in
switch because that's what locks
in the
um the score relays so like if this is
100 when the 100 Point relay pulls in it
stays in until that switch opens up the
way that reason they do that is to make
sure that it pulls all the way in so it
can turn that score the whole way right
now
here is another switch see how it's open
see how the
two contacts are open so we're turning
around it's open it's open it's open
it's open it's still open and then you
get
to Bam it's closed now why did it close
that's cuz that's the ninth position
switch that closes when you get to nine
displayed on the score
reel um because the next time that this
pulls in it should not only move this to
zero but it should send a pulse electric
electricity through this switch that is
closed to the next
reel to make it turn from zero to one so
that's how they carry over from 9 to 10
instead of 9 to
zero okay now when you're off
nine it's open and it stays open the
entire
time and then it will close at the next
nine now on this other end there are two
more
switches if I can get them where you can
see
them
those right now those are
closed the entire time you're scoring
until you get to zero which just happens
to be our next number
when you get to
zero those open the purpose of that is
to Res so that the game can reset the
score relays I mean the score reels at
the beginning of the game it the reset
relay comes on and it tells everything
to reset and it tells the SC the score
reset relay to start resetting
these switches I mean these score reels
when it gets back to zero that switch
opens and it can't do it anymore that's
how it's resetting it is through that
switch and then the other switch opens
because the reset relay will stay on as
long as one of those six switches is
closed so six of the switches are to to
stop the actual reel from turning and
then the other six switches are so that
the um reset relay knows that it's been
done
right all right so uh basically you want
to clean those contacts and then
carefully wiggle this thing back
together so when you you put it back
make sure you Center it you know you can
move this board around a little bit just
make sure that it's not going to
rub when it spins around so the next
thing I'm going to do is clean this up
again I
use light sandpaper but you can use
Brasso or whatever your favorite thing
to use is soapy water a magic eraser
spit whatever you think's great you
don't have to argue with me about it you
could just do whatever you want to do
and not even mention it to me that could
work too so I put uh the Super Lube on
it and cleaned up the contacts cleaned
up the contacts on the bottom of this
plate too CU it goes on upside down and
this contact contacts those and then
this
contact contacts the
plate so it's electrically conductive
but so basically you have to line it up
up with the three little nibs
Nubs
AAC and uh get it just right and then
you got to do that one too and then you
got to put the retainer ring on it and
put the screws in you got to do all that
at one time so I can't do it on you know
that's just not going to I got to just
do it and then I'll you'll see it here
in a second it's you
know now if you go out of your way to
force it you can mount that thing
wrong um even though they're different
sizes because it can bend and all of
that right small small large now if you
notice you'll be able to tell see how
the one has a
little hole in it and see how this bar
aims straight at the
zero so the way it's set
up if you have it on wrong you would
have that
bar you would have this
aimed that way so what that would mean
is when it gets to
here instead of displaying the number
right it would display it kind of like
that it wouldn't line up right and so
you'll see you'll know that you got it
on wrong because the numbers won't line
up straight with the other ones and then
if you get to this other
one same thing if I had it mounted wrong
it would be about like that and it would
be in between numbers you'd see like
half a
number right so since it's Landing
Square on the numbers we know we've got
it
right it's not that big deal you'll
figure it out if you screw it up just
look at it close again all right so I'm
going to put that back and then we'll
put the play field down and we'll uh
start it over again and just make sure
that it can reset all of those score
Wheels okay so when I hit start um the
reset relays are going to come in and it
should start resetting all of those and
then when they get back to zero it will
open those switches on each one and when
the last one does it it will uh let the
machine know that the score reels are
reset let's see if it works according to
plan how cool is
that all right so it's working but it
already did so no big deal
now the back glass still isn't dry and
it's just going to look how it looked
before so uh we're not going to be able
to put that in we're going to have to
let it keep drying so we'll mess with it
on the next
video look how the bonus uh didn't reset
I wonder if it's supposed to I don't
know we haven't messed around down there
yet but that's what we'll do next time
so I hope you enjoyed it leave your
comments down below and we'll see you on
the next one now if you like this
generation of got the pinball machine
here's one we did a while back
um that we really enjoyed check it out
here we'll see you on the next one