PPO3 is supported by Timber King sawmills. For more information on my 1220 CRZ mill
or one of many Foley hydraulic options, go to TimberKing.com.
See that beautiful sky? Nice and clear. It's not going to be that way for long. We've got
storms rolling in today, so as beautiful as it looks right now, it's not an outside day.
We've got potential bad weather coming. I guess because of the storms, I am inside today,
so why not just make the shop an absolute wreck? That's basically what I'm going to do. I got to
start moving all this stuff so that way I can build the CNC machine that has just been bugging
me. I want to get this thing done. I want to start using it. So this tool island goes to the wall.
The tools on that wall go to the back wall. The tools on that back wall are all hand tools,
no electricity tools. They're going to go on this wall. I was wanting, of course, nothing
ever happens that way it seems like. I was wanting to have a bunch of lumber milled and ready to go
that way I can cover this wall with wood before I put all my stuff in front of it. That's not going
to happen, so I'm just going to pile all my stuff in front of it and get it somewhat organized. That
way I can actually use it a little bit but not worry too much about getting everything put in
place finalized because I'll have to pull it all back off the wall when we put the wood up that we
haven't yet to mill on that wall. We milled a bunch of lumber this past week. It is Monday right
now and last, I think it was Wednesday, we milled up enough five quarter pine. It's all five quarter
thick, six inches wide, and eight foot logs but we milled up enough of that for our uncle to top a
16 by 20 foot deck and that would have been enough to cover that as well. Anyway, we keep
milling stuff but it keeps leaving before we can actually use it. Jamie's about to leave with all
this stuff during this blanket chest build which, hey, there's a video on my woodworking channel for
that blanket chest. During that I had to stop and batch out a bunch of pieces for a birdhouse build
for the kids at church. Don't mind the skylight on the top of that birdhouse. This is just the
example piece for how we put it together. But this, look at this hole in the front of the
birdhouse. That's a knot hole. That is, that knot hole is not a drilled hole and it's like that,
was it the hashtag faces in places? Jamie sees this as a cyclops ostrich, right? There's the
ostrich beak and there's his cyclops eye. I see this almost like that's a nose and that's the
droopy lips of like a some type of dog or something and here's the eyes squinted down.
Anyway, hashtag faces in places. She's about to take the rest of these pieces out of here
and, oh, I also picked up a inexpensive drill press. This is the $85 drill press from Harbor
Freight and I missed my drill press from my last shop but it was one of the tools that I couldn't
quite fit in the shipping container when we moved everything. So it had to go. Drill presses are
pretty cheap and easy to find. I picked up this super small one because I needed something to
just drill the holes real quick for the birdhouses, nothing crazy. I wasn't going to drill all these
holes by hand, that's for sure. There's 16 countersunk holes for screws. Kids are using
T25 screws rather than nails and all that just for speed and I had to drill all the holes for the
actual front door of the birdhouse, the front opening of the birdhouse and we built 40 of
these so she's already taken some of the pieces there so that's all that's left to take. But
anyway, I do want to get a big floor standing drill press and when the time comes for that,
this will be a perfect little drill press for small tasks and or Tyler K to play with. So that's fun.
Today I had two things on my list, well two categories. AM, video edit. Check that box,
got some good progress. And then PM, second thing on the list, was to mow the important areas
and then what else was it? Work on the space for the CNC machine. So what are the important areas
to mow? I have cookies. Yeah? You having fun? All right, let's take a little detour. I was going to
walk over there and talk about mowing areas but what do you got going on over here? You're making
cookies? I've made cookies. You've already made cookies? What flavor are these cookies? Grape.
Grape flavor. Grape, grapefruit. What are the ingredients list? A little bit of this,
a little bit of that. Chalk, dirt, and seasoning. Oh, I bet they taste lovely. Chalk, dirt,
and seasoning. Have one. Have one? You know what? I'm watching my calories here.
All right, well I give her some old seasonings and play with like this is like the most amazing
toy for kids. Stuff that didn't work out or for whatever reason we're done with.
This one was empty I think. This got old and stale and old and stale. I used that one. Yeah? And then
when I finished using it, I turned it into water. Into water. What is, oh here's your speaker.
All right. All right, so we're gonna, we're gonna listen to that for a little while, huh?
All righty, let's walk this way. All right, so while she teaches the birds how to really sing,
we're gonna come over here and get a game plan. I do not want to mow in the sense of mowing a lawn
but there's a few areas like around Jamie's bed right here. I gotta keep this down a little bit
more so she can enjoy it a little bit more. When it gets tall like this, she obviously, it scrapes
on your legs when you're walking, wearing shorts and it's just not fun to walk around. So she
doesn't come around here that much. Not as much as she wants to anyway. So we're gonna get this
knocked down for her. I'm not gonna go like a full-blown mowing because I prioritize tall grasses
and wildlife and it's just wonderful. But what I will do is go around this pile a little bit so
it's not so grown up around the burn area, which we got to burn again. And then over here near the,
look at all these sunflowers. I love it. Here's a big batch of sunflowers. This is one of the first
batches we threw out. Pretty cool. And this section over here, this is all real tall. We're going to
leave it tall for right now. We don't have any use for all those grasses and whatnot just yet.
We're going to use that for compost, a source of greens for compost. And then this, you can kind of
see my path from the first time I did this. I'm going to maybe encroach a little bit on these
sunflowers over here to get this circled. I want to get this. This is the, the berry bunch. Jamie
put a bunch of berries and whatnot over here. And one of the fun things with the CNC upcoming is
I want to make signs for the property. This is the berry bunch. She's got berries all through here
and I want to make a sign of like the logo of the Brady bunch, but change it to the berry bunch,
make that sign and put it out here. Kind of fun, whimsical things to do on the property, but this
has to be maintained because I want this to eventually be a wood chip path all the way around
the berry bunch. And then I don't know about this area over here. This is going to be the pond area.
So not too, too worried about this, but this is an important path that I need to get nice and clean
around here and maintain clean around here. This strip of vegetation on the side of the garden,
we're going to leave this and let it go because last year this was all wildflowers. So I'll be
bringing in a bunch of pollinators and such for the garden. Yesterday we finished up these
raised beds, got those all nice and tidied and planted. And I think Jamie says she's pretty
much planted everything that she wants to plant for this year. It's the beginning of June,
so we're kind of getting late in the season anyway. But every area that has not been planted,
you can kind of see a lot of grass through here, she's going to focus on just making this a little
bit more suited for growing next year. Also this corner right here is still low, so we're going to
prioritize building this up just a little bit, not a tremendous amount, but just a little bit with
wood chips and whatnot. I think we have the swale figured out as far as keeping the floodwaters
off of this. I say floodwaters. This area is still quite high and it'll never flood per se,
but it's just the heavy runoff waters. These raised beds, I'm looking forward to when these
pop up. So we got garlic and garlic, onions, carrots, tomatoes. What's the kind of pepper you
put in here? Cayenne? Huh? Cayenne pepper is in one of these too, so she's got all these planted and
we're looking forward to these just exploding. It's going to be a lot of fun. All right, let me jump
back into the shop, get the mower going, and start jamming to some headphone tunes and be productive.
All right, changing my mind just a little bit. I said I wasn't going to mow all this because I like
the wildlife and whatnot, but there's so many stumps in here that I need to keep a better eye
on where they're at so I don't run into them all the time. Also, I think the best plan
for us is to have clusters of tall stuff where the stumps are. That way I know where
the stumps are and I don't hit the stumps. Also, it'll give us more paths to walk through here.
The dogs will be more able to walk through here without being like, well, completely swallowed
in the vegetation. You see how tall the bomba light is and half of these grasses are like six,
seven feet tall. They're taller than I am, so it's going to be fun plowing through all that thick
stuff and getting all this stuff knocked down. Okay, so maybe I contradicted myself a little bit
and went a little crazy with it, but that is so much fun. This is instant gratification.
These were real tall. Like I said, I got a stump right there, got a stump over there,
and I thought there was a stump over here somewhere, but it's actually a big mound of
dirt. I got to keep a better eye on these obstacles. Now that this is all knocked down,
I can determine what is the best path to get through here and let these obstacles or these
bad spots just really grow up a little bit nicer, right? We're just trying to manage this while also
allowing things to grow. Also, I've got a half of a downed tree over here that I never did pick up,
so that's kind of limiting as far as how much I can go that way, but this is looking a lot better,
I think, and it makes me just want to keep going. I said I wasn't going to, but she's
raking a lot of this up for the compost, so why not? It'll all come back. It is a hot and humid,
goodness gracious, we're fogging up already. Oh, it's a humid day out here today. It's like
333 percent humidity. It's raining, so I'm going back inside to work on some stuff
and this lens. All right, let's go inside. It's hot and humid out here. I've got all the doors
shut in the shop and I left them that way overnight because I knew today was going to
rain, so I was like, let's experiment. Yes, it's hot and it's the summertime and I don't have, come on,
come on, Grace, I don't have air conditioning in the shop, but if I can capture last night's low
temperature and kind of maintain it in the shop because the sun's not really shining,
so it's not going to really bake the roof, then I'll be able to maintain maybe 78 degrees and
60 percent humidity versus 85 degrees and 90 percent humidity. Anyway, that's what I'm doing
today is working in the shop. As you can see, everything is a wreck. I've got most of my stuff
moved back onto this wall, not organized at all because I'm making room for the CNC machine. So,
the CNC machine is going to have a capacity of 5 foot by 12 foot in that direction and these tape
measures represent the overall footprint. Now, actually, the footprint itself, where the feet
will go, is a little bit less than this because we have some overhang for the cable track and for
the control boxes and whatnot, but this is how much space I have to dedicate to the machine and
it goes all the way to this other tape measure over here, so it's quite a big machine. This kind
of is a wide angle lens, so it looks like a swimming pool area, but it needs to go right
there. So, I have it laid out on the floor so that this end of the machine is pretty much in line
with that end of the door. That gives us both a walkway as well as some space up against this wall
for what will be, down the road, most likely the indoor miter saw station. I moved this
sander over here, but I think all three of the sander, planer, and jointer are probably going to
end up on that wall. I'll tinker with that when I move the jointer, but I wanted to get a feel for
where the machine is going to be, you know what I'm saying? And this front edge is basically the
front edge of the jointer, which I had lined up with this side of the door. So, this side of that
door, and then that side of that door, and then wherever it comes out here, which is the end of
these two tape measures, will be just fine. Now, it's going to be higher. My last machine was just
a little bit higher than the table saw, so the table saw would whack into it if I just left it
that way. However, this island is maneuverable. So, I've already got it kicked off on a slight
angle. This table saw, it's on a mobile base, so it's really easy to just jack it up and move it.
So, I think I'm going to pull this around just a little bit more so I can rip at the table saw
eight feet without hitting the machine. And then this other section over here, if I'm using a
sheet of plywood sideways right here, we don't need eight feet that direction, so it should be
fine. So, the last thing to do is move this aircraft carrier. This is a 12-inch Oliver
Jointer, and chef's kiss, I love this machine. It's just, even after knocking it over on the
on the trailer, moving it over here, it's calibrated right back, and it's just
really nice walking up to a machine that's ready to go, and bam, flat surface on wide stock.
That's cool. Where am I going with this? Yeah, I got to move that over there, and what I've
been kind of delaying on getting this done, I was supposed to get this done a couple days ago, but
I kind of said, let's pause and really think about this, because when the CNC machine's in the way,
the forklift won't be able to get back here, and I'll have to figure out a different way to move
it, which there are different ways. But anyway, what I'm getting at is, does the jointer go there?
Does the jointer go there, or does the jointer go there? I initially wanted it over there.
I initially wanted the planer right where it's at, but I think we have to do a little switcheroo,
because the dust collection on this one points that way, and the dust collection on the jointer
points that way, and the dust collection's right in the middle. So I think I need to swap them,
so that the dust collection on the jointer is an easy path, dust collection on the planer
is an easy path, and maybe, just maybe, hopefully, I can get the sander back over here as well.
I can use the sander without dust collection, because I don't use it tremendously for big,
super crazy, gnarly sanding operations, but I really would like to have it hooked up to
dust collection, and that'll leave this wall open for a miter saw station area. So relatively
easy to do, it's just, I'm dragging my feet on getting this done, because I don't want to do it
again. So with that said, just like last time, I'm probably going to set up a time lapse and just
get to work. That way I can maneuver stuff around without having to articulate my thoughts, and just
get it done. I need to get this machine built.