PPO3 is supported by Timber King sawmills. For more information on my 1220 CRZ mill
or one of many Foley hydraulic options, go to TimberKing.com.
Well, good morning. It is Sunday before Memorial Day, Sunday morning, and we're stuck.
We are stuck. Not in a bad way, but let me explain. So we have so many different things that
we need to get done, our priorities list. You know, starting over like this, there's a never
ending supply of things to do. Doesn't matter what time of the day, doesn't matter what day
of the week, doesn't matter rain or shine, there's always something to be done. So you organize those
into priorities, things that we really want to get done immediately or as soon as we can, like
say the garden or things that we need to get done, say run the sawmill to stack more lumber in here
to dry out for our own needs. Well, we're at a point where the vast majority of things that we
can do, especially everything on the top of the priorities list, we're stuck for one reason or
another. We just can't get anything done. Mainly because the weather. We had a bad drought this
spring. Normally our drought is June, July, August, September, sometimes even into October.
That's normally our big drought throughout the year. But typically speaking, Mississippi is a
wet climate where we get a lot of rain. So we had our drought very early, which makes me wonder if
we're going to get two droughts this year. Our drought has ended because we had rain and rain
and rain and rain in the forecast. And then there's more rain and rain and rain and more rain
in the forecast as well. So everything outside turned into muddy goo. Okay, let's pump the brakes
on everything outside. Although there's a couple things out there I want to walk out and show you.
Cut the swale and of course that little pond thing that I'm starting on.
So, excuse me, we pause outside and hey, we've got this covered shop. Weather doesn't bother us in
here, of course. So let's go ahead and make a good old fashioned woodworking project. So that's what
I did. I started on and almost got to the full assembly stage on a big raised panel blanket
chest, hope chest. A buddy of mine's calling it his war chest because I'm making it for him,
Mr. Nathan. So this is some of that beetle pine and love it or hate it, I don't know.
But I made some raised panel frames. This one right here, we're looking at one of the front
or backs right here. One of the front or backs and then I have the side panels and all that over here.
So anyway, I'm ready to assemble this but I can't because as I was setting up or actually
walking to the table with this in hand, my last panel to do a raised panel,
my router died. So this is what I'm trying to achieve and one more to go so I can't do assembly
and my router died. This is my, I've got a pretty nice router table. It's a Rockler router table
with a cast iron top and a nice lift in it and then this is a Porter Cable 7518. I believe it's
a 7518. Porter Cable 7518 manufactured in 2019. So these routers were like the industry standard
for a router table. It's a big beefy, I think it's three and a half horsepower router, 4.2
inches diameter right here. It's a big router. But the recently manufactured, I say recently
because I think they discontinued this model, but the several years before the discontinued is
they ended up having a lot of speed control issues as well as switch issues. Now my switch was bad
but it was stuck in the on position and I tested everything with a voltmeter and all that and
there's no need to simply rewire a new switch. I don't know much about the speed control module
which is this down here but people say that the speed control goes out. This also controls your
soft start if I'm not mistaken. So bypassing this completely gives you, you know, use of the router
just with the on off switch and it's a very abrupt start which is not fun if you're using a big old
gnarly like raised panel bit. But here in a router table I think that would be okay. However, I think
this one is actually fried because there's some stuff inside it that melted and fell out of it
which sucks because there's, you know, this isn't that old to be honest with you.
All these parts came out of the inside through the fans where it was melted and of course I blew
this out with air compressor and it was just like a fog. All kinds of dust caked up in here
because I think this router table is not the best actual design. It's nice, it's solid, it's beefy
but let me kick these boxes out of the way. Actually I'll just sit on these boxes like a
chair. Inside here is the router table cabinet, right? So the router table is, the router is in
that lift. That lift is upside down. It's sitting down in here and the only way for air to get in
this box is through the wire grommet. That's where the wire exits and there's actual grommet that
goes inside of it. So it has to pull air in there because it's being sucked out right there with
dust collection. You can either get clean air from right there or clean air through the throat plate
of the router lift, right? So we're not getting much clean air in here and then when we're also
sucking air through the opening of the router plate up there, it's sucking that dusty air in
and of course the router has to suck up that dusty air. It's breathing in dusty air. When I designed
my lever router lift years back, years ago, I designed both versions. The first version and
bigger version so that way the dust collection was technically outside of the router. So the
router was actually breathing in clean air. The router itself wasn't in the dust path. So
did all of that dust cause this to fry or did I just get one of the typical bad quality,
you know, later models of this particular router? I don't know but regardless,
one piece away, one piece away and I have to shut down operations. Couldn't finish the project. I
was hoping to publish that today. Today is Sunday. I was hoping to publish this video Sunday and
hey, while we're here, we'll check out the router cabinet here and of course I can't publish it
because I'm not finished with it. All of my bits, the shafts and whatnot, got rusted during the
move and whatnot. So still good. They're just the shafts are a little bit rusty and then the
carbide's just fine as well. Anywho, I got to clean all these up and get back to
familiarity with router bits and whatnot, especially this bad boy right here, this
flattening bit because the CNC is next on the list as soon as I get this project done. The
goal was to get this project done last week, edit, get the video out and then be starting in
on the CNC build today, which just means we're a little bit behind on that build.
So because we can't really get any of our priorities done, we're tinkering on some
small stuff here and there behind the scenes, but nothing that really shows great progress.
We decided to get the gang together, get some good old friends together and have a
card night and game night. So that's what we did last night. There was five of us guys who were
back in the day, the pool shooting gang, right? All five of us, Friday and Saturday night,
we would go to this little place in New Albany, Mississippi called Jeans. It's no longer called
Jeans anymore. It's a truck stop. And in the back of this truck stop was a bunch of bar box tables
and they'd have pool tournaments all the time. And we'd play in tournaments. And then of course,
that was, I think the tournaments were Friday night and then Saturday night, we just hung out
and had a lot of fun. And it was that group of guys. And that's when we were witnessing,
didn't realize it, but that's when we were witnessing where we were finding all of our
significant others and then eventually starting to spread apart. But when I moved back here,
two years, two years, we've been here for two years. When I moved back here,
you know, every now and then we get the guys together and it hasn't been all of us just yet.
Most we've gotten together was four out of the five. Last night we got three out of the five,
including myself. So two good families come over and we treat it like the 1990s. We're
playing board games. We're playing cards. It's just so much fun. It's so much fun. So
this, this shop has turned into such an amazing multi-use space and for, for the,
to have the ability to just kind of push things to the side, clean up a little bit and,
and just chillax in a big old wide open space with a bunch of people. It is, it's,
it's food for the soul. You know what I'm saying? It's, it's, it's it feels good. It really,
really feels good. Went to bed last night with nothing but smiles. Woke up with nothing but
smiles and yeah, a good day yesterday. And today is a good day as well. So why can't I just pause
the woodworking and jump into the CNC build? Well, because I still need the shop set up to finish
that project. And the CNC is going to go right where that tool Island is right there. That
Island's going against the wall. Those over there going against that wall, everything on that wall
is going against this wall. So it's going to be rear rangeritis for about a day. And I'm okay
with that because big machine's going to go right there, but I can't pause the build. I gotta get
that done. I can't pause the build and move on because it'll tear up, tear up the whole shop.
Speaking of build and projects and whatnot, this is a coffee table that I made a few years back.
This is a pecan crotch slab table that I backfilled with some epoxy. It's a little
dusty. I got to clean it up real nice. And the legs are curly ash with a curly ash rail system
down below. Walnut pieces on the bottom for that curly ash drawer that's got box joints connecting
it. And then the rails on this side, let me go over here. The rails on this side that are hanging
down, you see that they are actually a sliding dovetail. So the sliding dovetail helps keep the
table flat as well as providing for the drawer right there. And the sliding dovetail is only
glued on this side. So it's not glued from here to the rest of it. However long each one is there,
this one's longer than this one. It's only glued on this side so it allows for expansion
and contraction of the slab while also keeping it nice and flat. Anyway, I bring this up because
I don't want to see this table get damaged and it needs to find a new home. So if you're interested
in this table, I'll have a link in the description to the website article of when I built this.
You can check out that and if someone wants to make me an offer and come pick it up, I'll probably
gladly accept any offer for someone who's going to actually use it and take care of it. It's just
in the way right now. I don't have a place for it. And if I store it, dust and probably mildew
is going to destroy it. So I'd rather it go to good use. If anyone's interested, let me know.
I'm recording the chest build for the woodworking channel. That's why you haven't seen it here.
But something that's going to be kind of funny that I think people are going to notice is
the chain popped off my daughter's four-wheeler while sitting in the shop. So I slapped a couple
boards on it and this has been my rolling cart for this project. This and the wheelbarrow I've
been stacking wood on and rolling it around the shop. So yeah, rolling cart is a four-wheeler.
Let's go outside and I'll show you what I've been up to out there.
All right, this video is supported by Brunt. I've been working with Brunt for quite a while.
And then last year, two years ago, a year and a half ago, I picked up a pair of Brunt pants,
which I'll talk about in just a second. It's muddy outside though, so I figured I might as
well mention my boots. I've got the Bullduck boots on from Brunt. These are waterproof.
They're slip-ons, which is what I want. Something fast and easy to get in and out of while I'm
walking through this mud. And then when I go into shop and I don't want to walk through the mud,
I can quickly get out of them. Didn't really want to talk about boots though right now,
because I've talked about them in the past. Instead, I want to give an absolute glowing
recommendation from the bottom of my heart. I totally mean this. I have found the pair of pants
that are J-proof on this property or work-proof on this property, whatever you want to call it.
This property has destroyed so much stuff, me working on this property, so much more so than
any other point in my life. This is a working place and I'm constantly doing stuff physically
with my entire body. I'm working with my hands. I'm down on the ground crawling under tractor or
the truck or the four-wheelers or whatever, constantly working and constantly tearing up
clothing until I found these pair of pants from Brunt. These are the Costello Tech pants. I'll
talk about them in just a second. But before these, what happened is I can't wear blue jeans
on this property. They're just not strong enough. A lot of people work in blue jeans, but for me,
my right knee always gets blown out. My right knee gets a little bit of a rip and then that
little rip becomes a bigger rip. And then that bigger rip becomes the most annoying,
hugest, hugest, annoying, big rip that just grabs a hold of your kneecap, it seems like,
every time you bend and then just proceeds to get larger. So then you can patch them,
but then the patch feels goofy or you can sew them or it's sewed the wrong way. And then as
soon as you get another rip, you're down the same rabbit hole and it's just frustrating.
And I speak from experience. Blue jeans on this property are a no-go. About a year and a half ago,
maybe even two years ago, I got my hands on this pair of pants from Brunt. This exact
pair of Costello Tech pants from Brunt. And I wore them and I thought, well, these are,
these are comfortable. They are stretchy where they need to be stretchy. And I'm,
I'm kind of a bigger, short fella, but I'm also pretty flexible. So the blue jeans, you're not
flexible hardly at all. And if I feel like I'm a, when it gets hot and sticky out here in
Mississippi with blue jeans, you feel like you're kind of, kind of stuck on the lower body and
you're walking like a, uh, what are those? Uh, anyway, you get what I'm saying? Uh, these don't
do that. They're nice and comfortable. And the most important part for me, they're durable.
Like I said, I wore these almost every single day for the past year and a half. This is my uniform
and I'm a guy I'm out here. I'm not out in public. If it's got a little mud around the ankles,
I'm still going to wear them the next day. If it's got a little bit of something spilled on
I'm still going to wear them the same day. The only way I would take these off and throw them
in a washing machine is if they stink. I'm a guy, eh, whatever. I'm here by myself, uh, working by
myself most of the time. It just doesn't matter. I don't care if my pants get dirty. And I bring
that up, uh, not because I want you to know my laundry habits, but I bring it up because
that kind of tells you a little bit about how durable these pants are. I work hard in these
all the time and they hold up. They're, they're really good. So about that rip, right? These have
rip stop technology, no pair of pants. Um, I wouldn't say no pair of pants, but these aren't
Kevlar. You know what I'm saying? You can still tear basically any material, uh, that you're
really working on. And that's what I did with these pants about, uh, I don't know the exact
video, but I think it was, uh, in October of last year when I was doing that sketchy hillside
extraction with, with Hickory. Uh, I don't know if it was that video, but I do know for sure it
was at Mr. Jack's place. I jumped over a log and as I'm coming down, I see those insanely large
briars, the really pokey spiky briars that are like half the length of your finger. And in mid
air time slows down and you're like, Oh man. And then you land in them. And I got them right in
the back of my right thigh and, uh, cut my thigh up quite a bit. But let me stick my hand on the
other side of this fabric so you can see it, this material. So you can see it. So it ripped these
pants, right? They ripped them at about half inch in either in two different directions. You got a
little bit of a tear right there. And then also got a little tear right there. And at that moment,
I'm like, doggy, watch out for the tripod. I'm like, Oh man, my favorite uniform for work. These
are a tool to me. I got a tear in them. Dang. There's just nothing that I can't tear up. I'm
so hard on my clothes. Well, that was six months ago. And I'm like, this is just going to keep
spreading. Well, these have rip stop technology. I don't know what that means. I guess it's
sewn in, in a couple of different directions to stop the tear from spreading. That's my guess.
I don't know. But what I do know is that rip stop technology works because this rip is the same size
as it was back in October. And it's near the end of May in the following year. And I've put a lot
of miles on these in between. And that tear has not changed at all. So these are durable pants.
I've worn them, like I said, almost every day. Of course you got to wash them occasionally.
Almost every day for the past year, year and a half. So that's like, I don't know, maybe four
or five times the amount of typical wear and tear you'd see on a pair of pants. And these have held
up fantastic. These are the Brunt Costello Tech Pants. And after being so impressed with these,
I ended up getting three more pair and a couple different colors. So it doesn't look like I'm
wearing black every single day. So this is my uniform. This is my legit, I want uniform.
This is getting kind of long, I know. But I think it's actually helpful. The pockets,
they have this little reinforcement here because I'm an EDC kind of a person. I always wear
all kinds of tools with me. For example, this four right here, can you see my pocket? Yeah,
this four stays with me at all times. I have a knife for cooking because I'm a savage and I don't
like kitchen knives. I have a knife for utility stuff. I have a flashlight because a flashlight
is the most important thing in an EDC kit. I use it way more than you ever think you would.
And a marker. I wear those every single day and it doesn't tear up my pocket. All of these are,
I'm able to take them out and use them and put them back basically one handed and I'm not tearing
up the pocket as I'm in and out, in and out, in and out constantly. So the pockets are very durable
in that regard. Yeah. Brunt, thanks for letting me ramble about your pants. They're really
comfortable. They're really durable. And I give them two thumbs up. I really do. I have a coupon
code for anyone who wants to use it. It'll save you a little bit of money on your first purchase.
I'll have a link down in the description. There's something on the screen you can scan if you want
to scan it. Uh, there's that. You guys take care. Actually, that's not the end of the video.
Uh, we got to go talk about what I already did. So let's go do that right now. We are in need of
another round of wood chips. Uh, this is, this is actually wood chips. It's just starting to
decompose into material and we're starting to get grasses growing here naturally. We're not planting
anything, uh, but grasses are starting to come back. We need more wood chips. What we've decided
to do over here. Oh, I moved all these hickory logs. I just drug them up out of the way so that
this could be parking. We realizing, or I always park over here. Jamie always parks over there.
And, uh, what we're going to do is put a couple of beams like railroad ties over here to kind of
have like a, like a visual parking station right here. And then this distance, these, these pipes,
that doesn't look like it here, but they parallel the front of the garden. We're gonna have that
distance of wood chips all the way this way, because that's where the tractor is in and out
of the saw mill and whatnot. Uh, so the next delivery of wood chips from the tree service
company, we're going to put right here and just keep, keep spreading it out. So this is just going
to be wood chip area. I think we've determined our game plan with the, uh, with the rainwater
harvesting. And I'm not too sure if we're going to do it immediately. Maybe when we build the house,
we'll rainwater harvest off of here and then use a big, big container there to feed the house as
well as whatever else. Uh, but in the meantime, I just can't justify going all in on a rainwater
harvesting set up for the shop. So I'm not going to do it halfway. You know what I'm saying? I
don't want to spend a little bit of money knowing that I'm going to spend a lot more later. So
definitely long-term rainwater harvesting over there somewhere off of the shop roof.
At that point, these would have to go underground that way, but we're going to do something
different right now and probably put them underground just the way they sit over there.
Maybe even switch over that to PVC. If I don't reinforce this some way, because I am going to be
driving over it and PVC is obviously the better thing to drive over than this stuff. So, uh,
anyway, we've come to that decision. So parking spots here, chips over there. This is where this
is going to go. And that pile of wood I've already sold already paid for, but I can't get it out of
here because of where it sits. I didn't think this through. Actually. I know when I put this here,
we were in the drought, so I could drive anywhere I wanted. So these two stacks
and those two stacks over there is about a thousand board feet of four quarter pine.
And that's going to a local, uh, a local friend of ours. Um, so I got to get that out of here,
but I got to get this where I can drive on it already. Again, uh, wood chips for us to walk
through here. And then I jump over our swale. I used the rear blade on the tractor off camera,
tilt it on an angle to just cut a swale that wraps around there, feeds into this swale over
here. Let's see. Where is it? This swale right there goes this way and points that direction.
This one feeds into it. And if I come over here, you can see that it all kind of whimsically goes
that way as well as I kind of funneled some of it this way. So all that water, I want it to
to gather into this a little bit and then hit this and either go that way or this way.
And it's working because we haven't been totally flooding the garden during these heavy rains. So
it is doing what it needs to do. And that's fantastic. Let me walk through these chips
just a little bit and come over here. And we still have the panels laid out on the ground
where the chicken area is going to be. Uh, but I'm not putting any emphasis on this until we
get actually closer to having chickens. And I want to build a, a nice coop first. It's,
it's kind of an order of operations. There's no immediate rush to get this done. So I know
we're kind of dragging our feet on chickens and livestock and whatever, but, uh, it's just a matter
of a order of operations. And this is a long-term solution for us. So I don't want to do, like I
said, something halfway and then come back and change it because when I get to the point of
actually doing it, things change. So chicken group's going to go right here. And I mentioned
it in another video that it's going to kind of arc around rather than being a nice square.
So that's, that's why the swale does that as well. The swale goes, I'm starting to get into
all this mud that I don't want to track back into the shop. Uh, the swale kind of goes around
that way. Something we did off camera as well is, uh, we got an auger for the drill, uh, for a drill.
So we can drill three inch holes really, really fast for planting and such. So about three feet
wide, about two and a half feet wide, two feet wide, something like that around the perimeter
of the, uh, garden, starting at that gate, going this way and then that way through the chicken
area and then around and then all the way through there. I just went and randomly drilled holes and
Jamie followed me back with sunflower seeds and a little bit of compost filling in those holes.
So maybe come September-ish, we'll have this entire wall of the, uh, garden just filled with
full sunflowers. And that would be fantastic. Sunflower seeds, if you don't know, you can go
to Walmart or any other local big box store and buy. Our local Walmart has 40 pound bags of black
oil sunflower seeds for $22, 40 pounds of them. That's a tremendous amount. And they have like a
hundred percent germination rate. Let me see if I can't get back over here to this side and we can
just take a look at some. I can see them sprouted, sprouted from where I was standing. So yeah, look
at this. These are all sunflower seeds right here. All of these, those are ants too, but sunflower
seeds, sunflower seeds, they all pop up. It's sold as bird seed, but it's the, it's the best bang for
your buck as far as getting a bunch of sunflowers growing. Uh, so there's that. Um, what else? Let me
walk this way through the mucky muck. And we got, so we were in this drought and we're like, is this
drought ever going to stop? Because they keep saying rain's coming and no rain came. Rain's coming,
no rain came. So then I picked up this multi-filtration system, just a basic filter system
with a carbon filter to hopefully get the chlorine and whatever out of the water. So I hooked it up
to the city supply and watered it with a soaker hose for one day. And then the rains came. So it's
like, ah, what do you do? All right. This is still ooey gooey over here. I need to work a little bit
more on mounding up this right-hand side and getting this swale to, uh, function as a better
swale because these are tractor tires going that way. This, I left this strip right here because
last year we had these just beautiful yellow wildflowers that came up. They're about waist
high and it was really, really dense with wildflowers. It was so dense of wildflowers
that, uh, Tyler and I almost caught a gardener snake that was about waist high, just chilling
in the grasses, just hanging out. And, uh, we tried to get it, but it scurried away. So we're
going to have a bunch of these pollinators right next to the garden. Uh, Jamie's been coming back
and adding compost to each one of the plants and whatnot. She's getting mild success. Obviously
it's going to be better next year. I'm just going to go ahead and walk around this side and stay
over here. So the pond that I was digging is about a quarter to one third the size that I
actually want it to be. Um, but I had to stop because like I said, the, uh, the, well, as you
know, the hose on the tractor blew on the loader lift. So got that fixed. And then I was behind
another stuff. So I had to come away from this and you know the story. So anyway, this is nowhere
near the size that I want. Um, it's about three feet deep at the deepest and about as long as it
is this way. I want it to be an oval that way. So we're going to cover a lot of this stuff over
here. Those three leaning sweet gums, those were damaged from the ice storm. They're obviously not
going to stay that way. I'm going to cut them down and just let them grow right back into that same
cluster of stumps. They'll come back. It'll take many, many, many years, but I think that
with another, uh, that is a sweet gum behind it as well. That'll be a nice two tree cluster for
what we're calling the berry bunch. Anyway, this still needs to be dug out and I'll probably wait
until, uh, the next drought. If we get another drought this summer, which we typically always do,
then I'll wait until it dries out as much as I can and then start digging this out as well.
In the meantime, this is Tyler Kay's favorite spot on the property. Absolute favorite spot.
So, uh, yesterday some friends came over, uh, her and Lucas, her buddy, Nathan's son.
They were playing in here constantly with the dogs and the dogs love running through it with
them. So yeah, a little, little watering hole. What about mosquitoes? It sounds kind of weird
to say, but I'm not entirely worried about mosquitoes. Uh, one thing that I've really
learned with this property and I've, I've educated myself with, with it on YouTube and whatnot, but
the more diversity you have with plants, the more diversity you have with insects,
the more diversity you have with insects, the more competition you have.
And therefore pests typically can't thrive. Let's just say you're in a city or something that has a
pond, uh, some area of not any moving water. That's going to breed mosquitoes. And if you're
in the city, well, you typically just have grass or in a, in a community, I guess you typically have
some grass and maybe every person, every house has a little bit of, of, uh, landscaping and flowers
and whatnot around their house. But it's not like it is out in nature where there's a lot of variety.
And I think that variety brings in all of these competing insects and really helps control the
population of, of all of them across the board. So we do have mosquitoes for the amount of standing
water we have all over the place. I don't think we have bad mosquitoes. They really haven't been
too bad here. And I, maybe I just jinxed myself. I don't know, but it really hasn't been that bad.
And I'm thankful for that. Like I said, I think it is the diversity of everything that we've got
going on. Oh, we've got some of our first wild yellow flowers coming up over here. All right.
This is the point where I say Leviosa can just levitate over there, right?
There's no way around it. You got to walk through it eventually. All right. So this is, Jamie's been
mentioning this. This is the Brady Bunch. There's a huge cluster of red maple trees right there.
Interesting. Anyway, this is the Brady Bunch. There's a bunch of sunflowers in there as well.
And you can kind of sort of see a path that I've started to cut with the flail mower to go around
it. So we're going to let this thing grow wild. And then once it's wild, we're going to come back
and maybe if there's something we don't like, we'll pull it out. But generally just let it go
wild. This is full of berries and whatnot. This over here, we haven't quite tackled yet. So we're
just going to leave it and let it grow and let it do its thing and bring in all kinds of stuff.
Like I said, there's the first wildflowers over here. A little color for you. So this will all
be just glowing yellow and full of bees here soon, which is fantastic. Also got some, what is
that? I think I know the name of that, but I'm not going to say it because I think I'm
not entirely sure. Anyway, this is going to be nice out here soon. Some people say,
like this looks horrible and trash and you got to keep it mowed. I don't want to keep it mowed.
This looks like nature, in my opinion, way better. Now the house is eventually going to be over here
and I do want to have a little bit of the house lawn be mowed as well. And I'm going to take
this path because it's less mud. But you can see this is the original swale that I cut through
here. So we're still draining all that water behind us, all the overflow from the pond and
all that. It's still drains through here and goes that way. It's a slow process. It's not steep,
but that is the direction that it all goes. I don't have a good lens on here to zoom in,
but right on top of one of these pieces right here is a beautiful cardinal just landed. Oh,
there it goes. Beautiful. The birds on this property are just gorgeous. They're just so
gorgeous. Man, I wish I had a camera with a lens. Beautiful. So anyway, speaking of that burn pile,
that's basically where the house is going to go. Probably a little bit to the left of it.
We're going to try and line up the side of the house with the side of the shop on both directions
and both structures at that point will be slightly skewed from being perfectly in line
with north, south, east, west. That way, the north side, which is on the left over there,
it does get just a little kiss of morning sunlight as it comes up just to prevent mold and
mildew and whatnot. That was a happy accident. We didn't particularly plan that, but that's just a
happy accident. So the house is going to be somewhere over here. And I love it. The fact
that this is a little bit lower elevation because you see these different levels of stuff of our
life, different levels of our life. As your eyes continue to wander further and further back,
you know, you've got, in this case, we've got the burn area. Then we've got the log garden over
there. Then the logs over there for the sawmill and lumber over there. And of course the shop
over there. And it just, it just looks more interesting from this dynamic. It would be
really nice if we can figure out a way to have at least like a second story balcony of some kind
to where we get our coffee in the morning, go up on that second story balcony and look over all of
our, all of our life and then see the sunrise over there in the, oh, just goosebumps. Love it.
Love it. The swale is working and the pond-ish, pond-ish, that is working. I just wanted to show
those two things because like I said, we're stuck. We're stuck outside because it's muddy.
We're stuck inside because of that router tearing up and that's okay. We're just doing a lot of
things behind the scenes. As I leave you here, I'm going to spin you around and show you how much
Jamie's last minute idea that we're completely winging it and didn't know how it was going to
turn out. Ray's log bed has been turning out. It is, it's nice. Jamie did not add any fertilizer
or anything synthetic or anything like that to this raised bed. She hasn't hardly done anything.
What we did is last year, we built this raised bed. We threw a bunch of sticks in the bottom of
it. We covered that with dirt, not soil, just straight up dirt and then let it sit for a while
over the winter and then she came back and added plant here, added a plant there, added a plant
here, added a plant there, most of which she transplanted from the impossible garden last year
and then added some wood chips and it's just thriving. It is really thriving in here with
very little effort and I wanted to show you this because this is what I'm kind of hoping to see
next year over there. All of that's covered in wood chips. All of that has decomposing stuff
down below. It's going to get better. It's going to get better and there's your proof.