JK Boots: Hands down, without question, the best outdoor working boot that I have ever tried. They aren't cheap and they aren't inexpensive. The break-in period was brutal for me. But after some boot oil and a few working days for them to conform to my feet, I've never worked in anything as form fitting and comfortable.
My Lineup: - O.T. Bison Canyon for everyday work - Superduty Bison Shadow Roughout Smooth for earth work days - The Buck Indigo Chocolate square toe western for days where quick on and off are valued USE THE CODE jaybates TO GET $75 OFF on purchases of $200 or more! https://www.jkboots.com/products/o-t-bison-rust-roughout-smooth?bg_ref=BwlWA71DVt
PPO3 is supported by Timber King sawmills. For more information on my 1220 CRZ mill
or one of many Foley hydraulic options, go to TimberKing.com.
All right, I'm on my third rotation here or my third face cut. So we cut this slab off the top
and this is where I'm establishing the width of all of my boards. I don't know what this width is
but this is six and a half and that's what I'm after. I'll be able to get some usable boards
right here. Avoid the pith. I'm actually just going to keep running these into one-bys and
everything that has a pith I'll set aside and that's good material to build pallets out of.
I don't care if there's a pith in the pallet. And then the rest of this is usable boards as well.
We're going to rotate 90 degrees and go with one-bys wherever we get down on the scale right
worth anything. These two boards right below them are good enough for pallets and then we have a
stack of really good three and a half inch. It's three and a quarter but I'm gonna, I'm sorry,
three and three quarter but I'm gonna call it three and a half and it's eight foot six inches
but I'm gonna call it eight feet. So three and a half, eight feet, one inch thick. This whole
column looks to be pretty good. It's all like the middle, I don't know, six or so are quarter sawn
and then the bottom two, top two, look to be rift sawn. So this looks like it's a pretty good stack
on this side. I don't think there's any waste on this side. Over here on this side we have the
pith right here. Depending on how much it goes into these two boards right here, I may or may not
include these but these two are definitely pallet boards. These two are kind of, sort of not. Maybe
this one half is. So we might as well say this is going to be about one and a half of these,
okay. We'll say this is one and a half of that. So this, let's see, 3.5, 3.5 times 96 divided by 144
equals 2.33 boards and we are, 2.33 board feet, one, two, three, four, five, six, seven, eight,
nine, what is that, 20, 21 times nine, 21. So 21 board feet on this side, maybe 30 board feet on
this side and the goal is to get 100. So I'm going to set up a time lapse, sticker stack these based
upon good versus bad and then just plow through the rest of say I think two or three more logs
admits that he was wrong and that all 75,000 people on the internet who told me I should move
this sawmill and spin it around, yeah, they were right, they were right. But here's something that
you may not have known, the wayward wind comes from that direction. So that's south, that's west,
so right about there to there, that's typically the direction where our storms come through,
right. This is where most of my time lapses show the clouds coming in. Therefore, the wind comes
in this way and I had a fan behind my back blowing this way. Sometimes, most of the time that worked,
sometimes the wind was overpowering the fan and then the fan became pointless. So that kind of
sucks and then other times when there was no wind at all and the fan was doing its thing, doing its
job like it was supposed to, we were blowing all that sawdust right on top of Jamie's car.
That was, excuse me, that was a, what am I looking for here, an unforeseen situation.
So now all the sawdust will be over here on the left side with the wind at my back naturally,
the wind will naturally come this way and then I've got the fan moved over to here. So the wind
goes this way, the fan goes this way, that should keep all of the dust out of my face because honestly
I don't care if the sawdust gets on me. Mississippi is hot and humid. You just reach a point where
you just become sticky and that is what it is. So sawdust sticking to you, that is what it is.
Whatever, you can't change it. But I don't want to breathe that crap in. So having the wind and the
fan, yep, yep, yep, yep, yep, yep. You guys are right. Yeah, I know, I know, I know. You guys are right.
My biggest concern is dropping the log on top of here and it rolling this way and falling to the
floor. But to be honest with you, every log that I put on there, I open up the jaws and see what the
log is going to do before I move the tractor away anyway. So if I move the jaws and it doesn't roll
and I just lift up the grapple and it doesn't roll, well is there really a problem? And I can
also stick some poles or something over here to stop it from rolling. I'm not going to go through
the hassle of relocating these log stops to this side or doing any of that or adding extra log
stops over here. No, I think I'm going to try and get away with using what I have to prevent
it from rolling this way. But also using common sense. If the log is rolling, don't let it go with
the grapple. And of course, of course, I'm never going to load a log with someone being over here.
That's just nonsense and silly. All right. Thank you for the suggestion and motivation to get me
to move this around. I very much appreciate it. Now, if any of you have winning lottery numbers,
about the mill being in this orientation is better. Oh man. You know, sometimes you just
get stuck in your own way, I guess. I was justifying the sawdust being on that side. I was
blah, blah, blah, blah, blah. It's better this way. You're right. I'm wrong.
I got a lot done today and my piles seem to be going all over the place because I'll do a little
bit and then plans will change and I'll have to do a little bit of something else. So on this side,
we have eight footers. Let me turn around so I can see what I'm looking at. Sun's bright.
On this side, we have eight footers, the first, let's see, eight foot beam, pallet, pallet,
two by four, two by four, two by four, two by four, and then some scrap one by's on top that
are not good enough for anything other than pallets. And I switched over this side over here
to one by's as well on eight footers because I had my first paying job.
Someone in the comments section will say wanted 100 board feet of one by material. So
I moved one of the pallets over here, the eight footers, to start stacking some one by material
good enough to sell. And then that way I could use both piles. That side's not good enough to
sell. This side, I think, is good enough to sell. And some pretty decent boards, if I do say so
myself. Oh, there's a butterfly. So this pile over here, this stack, we got eight foot beams on,
I'm sorry, 12 foot beams on the ground, 10 foot pallet, 10 foot pallet, 10 foot two by four,
10 foot two by four, eight foot pallet, eight foot pallet, and the rest of it's one by material
good enough to sell. So you only wanted 100 board feet, but I think my calculations said that I
sought up 188 feet of good material plus a bunch of bad material over there. So I don't know exactly
how much I sought up. I think it was three logs today. And, you know, that doesn't sound like a
lot, but on a manual mill where your calories are responsible for moving everything, I'm gonna say
that's not too shabby. Although I got to find some ways to work faster because I don't feel like
I'm denting my piles of logs. Not nearly enough is what I should. I've got so many logs set up,
ready to go. Yeah, everything about the mill being here is better. I mean, everything
down to just the fan, right? I put my fan on this side rather than over there. So we've got the wind
working with my fan and all the sawdust goes that way. Wonderful.
And then that allowed me to put a secondary hose on the air compressor that I can keep right here
right in front of the fan to blow myself off right in front of the fan when I'm done working.
Like everything about this is better. So thank you. Thank you. Thank you very, very much.