Thanks to BRUNT for sponsoring this video! Get $10 off your first purchase at https://brunt.yt.link/BcOiiSE using code BPO3HOMESTEAD.
Finally jumping back on the sawmill. A relative needs 16 true 2x6x8s, and we need boards to wrap the apartment's exterior. We ended up completing the 2x6 order and having a few 8/4 slabs of red oak left over for us. And we got about 2/3 of the material needed for the apartment cut. Of course, a "we should have done this sooner" moment with the mini skid..
PPO3 is supported by Timber King sawmills. For more information on my 1220 CRZ mill
or one of many Foley hydraulic options, go to TimberKing.com.
Got a mixed pallet of wood right here that needs to go. It's about as much as my tractor can lift
up. This four-quarter pine down here was stuff that I had already cut and that was in the way.
All this is eight-quarter red oak, specifically 2x6x8s, true 2x6x8s, and the red oak is
for a trade. So that's going to be going this weekend to a relative. I also have a bunch more
red oak from that same two logs that I cut up for us. Just left it in oversized four-quarter
and I got some slabs down there on the bottom that I'm not even going to rip the sides off
of. We're just going to stack it like that and just set this to the side for us. But really,
really clean red oak. There's only one little blemish right there on the whole board which
is really nice and I think the one below it's got a little bit of spalting on the edge which
honestly I'll probably just cut off. But anyway, red oak done. Red oak is heavy.
I'm tired of moving red oak. So now I need to, oh I got to play the switcheroo game and put some
pallet forks on the tractor to get the pallets off, to put the grapple right back on, to start
loading some pine and all that good stuff. You know what I think I might do? I think I might
leave the pallet forks on the tractor and then put the grapple on the mini skid and see if I
can't load with the mini skid with pine. I haven't done that yet. It'll be a good test for it. So
probably do that. I've got a recommendation for you. This video is supported by Brunt.
These are the Costello Tech Pants. The best, best work pants I've ever used. I don't like a real
thick heavy duty canvas work pants because you can't move in them. The thicker the material,
you just can't move in them. These are a lightweight work pants. They're stretchy where
they need to be stretchy. They allow for good flexibility and they're durable. They've got rip
stop technology. If you get a rip, it's woven in two different directions. So if you get a rip,
it's not going to continue to spread. They have a cell phone pocket on the right thigh,
some added protection over here on your normal pocket areas where you clip a bunch of stuff.
Anyway, these are the Costello Tech Pants. I'm actually wearing the same thing in the shorts
variety. I recommend picking them up. Pretty durable pants, really durable pants. And I think
you'll, I think you'll actually like these. Personal recommendation. Yes, this video is
sponsored and supported by Brunt, but personal recommendation. I really like these pants.
Anyway, if you'd like to check them out or want to save a little bit of money on your first
purchase, you can use my coupon code and I've got a link in the description as well.
Check them out. And thanks for Brunt. Thanks to Brunt for supporting this video.
I got two cuts into this pine log and ran out of gas. And of course, I don't have any more gas.
The grapple on the mini skid was a win, especially for pine. I could pick up these
pine logs with no problem at all. So I'm not too sure on some of the red oaks. Those were
a little bit, obviously, they felt heavier on the tractor. So I'm going to keep experimenting
with using this. The only thing I don't like about using this grapple versus the
BruteRake grapple on my tractor is my tractor has a joystick and you just barely bump the,
has the buttons for the grapple on the joystick. So you just barely bump it and the swing isn't
that much. This doesn't have the joystick buttons. Instead, it has a lever right here and it's either
all, and it locks into place. It doesn't bounce back. It's either all or nothing.
And it is fast. I guess I just lowered that. It is fast. So opening it up, bam, and shutting it,
bam. It's, it's super touchy. Now this machine, I think, has an upgrade to where you can relocate
the joystick into, actually, I guess it's not relocating, it's doubling up to where you have
control with, with buttons over here on the joystick as well. So there's the capability
of having that. This particular machine doesn't have that. So I think that would really help with
the grapple on here as far as being a little bit more controlled with the open and close.
However, it works. So, so there's that. That's a big win because that means I can keep the pallet
forks on the tractor more frequently, which is very handy to get these pallets off. So this
pallet is for us. It's, it's mixed as well. Got some eight quarter red oak slabs on the bottom,
and then the rest of this pine on top. I'm not listing it for sale. All of this,
we're going to start stockpiling. I need, I think it was three full bunks of pine.
So this isn't quite one full bunk of pine with the red oak, but three full bunks of pine,
and that should be enough to cover the entire outside of our apartment inside the shop. That's
it for me working outside today though. Beautiful day, not a cloud and like literally not a cloud
in the sky, nothing, which is fantastic. Looks wonderful out here. But I've got to go get gas,
and before I get gas, I got to get this heater out of the back of the truck. So by then, it will be
kung fu time. So I think tomorrow I'm going to pick up and mill some more lumber. Today's objective
is more of the same, stockpiling lumber and not worrying about a camera. So you guys are just
going to sit right here for a little while, and we're going to be productive. My pile of beams,
or sawmill cants, is growing, which is fun. I got to get the vertical table done on the CNC machine
so I can really start utilizing this, this stack. I wanted to pile up a bunch of these before I got
that done anyway because these are going to be some like small scale timber framing projects,
and I got quite a few of them. So that's good. Took a little break from the sawmill for lunch
and a shirt change, and I think we're going to get started back on. I got to,
I'm trying to work my way through these, these center bunks right here because no longer stacking
any wood or any logs on the interior of the clearing. It's all going to be on the outside.
So I think I've got one, two, whoa, I don't know if that picked up, but some dead limbs from the
ice storm randomly fell. Every time it gets windy we hear some big crashes, and yeah there was part
of a top up there still hanging. Anyway, I don't know what I was saying. I've got two more eight
footers in this bunk. The rest of them are 12 footers, and I think, I think I'm honestly just
going to cut the 12 footers down into eight foot logs and then just toss the extra off because
these logs have been sitting for quite a while. And what we've realized is we don't really have
any use, not anytime soon anyway, for 10 and 12 foot material. So when I first started piling logs
I cut a bunch of 10s and a bunch of 12s and realized that, well, over time realized that
eights is all we use. Which means, now that I think about it, which means those might be some
of the original logs that I cut way back before the shop was up. So those have been sitting for
quite a while, which means they'll be a lot lighter than that red oak we cut yesterday.
That's for sure. That red oak, when you're used to cutting pine, slinging that red oak is a
little bit of a challenge. But we got used to cutting the red oak and then when we switched
back to pine it was like tossing feathers. Having the tractor just dedicated with pallet forks for
right now has just been, it's just been nice. Oh, this is our last pallet. One, two, three, four, five,
six, seven. We can only do two more layers so maybe only one more log before I have to build
two more pallets. Say it with me folks, if it's not convenient you won't get it done.
This has been so convenient to just walk out here and get my chipping done. All the small stuff,
it can be chipped, I want to chip it and the pile keeps growing and spreading and growing and
spreading. Whatever chips in the yard is fine. But that only took three minutes so that is pretty
darn convenient. Something that took longer than three minutes is all this milling we did.
We filled up three pallets, well not quite three pallets, more like two and a half pallets.
And we can get about 250 board feet per pallet on four quarter material. So one of them has got
about, well two pallets have about quarter of that as red oak. One of those pallets that red
oak is not ours, the rest of it is. So guessing I would say we did about 600 board feet yesterday
and today. We got a little strike of of summer back into our fall. It's in the 90s again today,
not as humid. But that means the sun is starting to creep into the lean-to and it's just,
it just gets brutal when you're using a manual mill with the sun beating on you and you're being
pelted with dust. We also have, which is good, all of our all of our wind coming out of the north
so it's not as humid, that's good. But that is the opposite direction of our fans so like I'll
start getting pelted in the face then hold my breath and then get through it and the wind
changes a little bit and the fan catches up and blows it away and then exhale and you know all
those very strategic breath holds. Especially like the other day when it was super dusty and I
was mowing and whatnot. You get good at holding your breath. Anyway I'm running out of pallets
or I have ran out of pallets so I need to pick up probably tomorrow or the next day
building pallets. But while the sun is out and it's just getting a little bit hot out here
I'm going to go inside and start editing. So I'll probably talk to you, well I know I will,
talk to you in the next video.