Thanks to BRUNT for sponsoring this video! Get $10 off your first purchase at https://brunt.yt.link/YlJj1Xk using code BPO3HOMESTEAD.
In this video, we shift the log yard for our sawmill, leaving a clean slate in the front yard. The clean-up operation allows us to get rid of rotten and old logs and take inventory of what we have that is good. We moved the burn pile and burnt the trash in a more appropriate location. I also made a gadget for the chainsaw to accurately measure 16" splits and bucked an entire log into firewood rounds. I split each of those rounds with a heavy maul, then an axe. Then showed the newly cleared front yard and discussed how that will be the location for our orchard, right between the shop and the future house.
PPO3 is supported by Timber King Sawmills.
For more information on my 1220 CRZ mill,
or one of many fully hydraulic options, go to TimberKing.com.
Not everything in life is a win.
There are some duds that you think are going to work out,
but they don't work out. This wood
burning stove, an absolute win. Absolute win.
I love this thing. The last three years living with
my mom before I got out on my own,
we had a wood burning stove, and there's just something
So calming, relaxing, therapeutic, whatever you want to call it.
When you've got a little bit of a chill,
sitting down next to that super intense heat,
it's just good for the soul. I absolutely love it.
So the past few mornings when it's been cold,
like this morning it was 30-something degrees outside,
the shop wasn't too, too cold, but still lit a fire.
And you come right over here and you sit down and...
Quiet, nothing's going on,
and you're sipping some coffee and you're reading a good book and
you're just enjoying this wave
of energy coming off the heater and it's just...
First cuts off the sawmill are really good for kindling.
It's pine of course, no big deal.
A lot of people in northern climates burn exclusively pine.
Just make sure it's dry, right?
So good kindling from the sawmill offcuts.
I'm continuously bringing in downed limbs and crap
from the woods that were from the ice storm debris.
So those have been down for almost a year now.
We'll burn that and then of course I've got the whole pile of two
and a half year old already cut
up hickory in there. We are good to go.
This thing just cranks and I love it. Something else I've
been working on that's a little time consuming
is getting this vertical table done for the CNC
machine. That opens up so many doors for joinery.
I like this dovetail joint cut on the CNC.
I disregard this offset on one side, my vectors.
Vector was bumped over on accident.
Anyway, 100% end mill cut dovetail joint. Pretty darn
cool if I do say so myself.
I got that done, published it on the main channel. If you're
interested in woodworking stuff, check out
my woodworking channel for that. But today
we're going
outside.
Behind the shop
is where I want to
make the new burn
pile over here
rather than way down there
because we got to prep for the house build soon.
So this is going to be the next burn area
and I've already got a couple logs here that are so
rotten and bad but cardboard sticks on top of logs
this should be going quite well and there's we
burned over here previously
so let's keep going.
While the fire is going we're going to start
chipping away at this this is the center four bunks right
in front of the sawmill and we're not
going to keep this here everything is being shifted
that way for the wood for the logs and whatnot so
And also the majority of these pine logs have just
been down for too long and beetles got
them and they're rotting away.
So not a tremendous amount of value there. I'm going to take some of
the most rotten ones and lay down some more runners over there
to make two more, maybe one more.
uh log stacking row. I'll take all the good logs
that are left over here. There's a bunch of cedar
over here as well and stack them over there.
Everything else that's just junk is going to
get burnt and the ones that have the rot around
the perimeter from the bugs or or uh damage from
the bugs around the perimeter we're going to get
this pile of logs going that's just going to be
beams. I
don't know
if it's
showing
up on
camera
but that's
a huge
ant mound
under
there and
They're there and they're crawling everywhere,
including all over my boots.
And uh, totally not staged,
but these are the these the Omen boots from Brunt. I got these
recently. They're slip-on boots,
so you can get in and out of them very quickly and easily,
which is very handy when you're stepping in an ant mound
and chuck everything out of the way.
So yeah, sounds like an opportunistic time
to talk about the sponsor of this video. Brunt!
These Omens, they're slip-on boots.
They're uh, if I get it the right way, they're relatively short
Pretty comfortable. Has the same insole system
as all the other Brunt boots. I think they're
all the other Brunt boots.
It's where you have a middle, what's it called, a middle insole that
you can take out to make it a wider fit for you
if you have a wider foot. Leave them in if you
don't have a wider foot. But the same comfortable soles,
the same heat resistance up to 572 degrees Fahrenheit
But no laces. So slip on and get to work. Stay. Oh, no, no, no. Stay.
There you go. Stay. My dogs think I'm talking
to them. I'm talking to my boot.
Absolutely.
There's a few different options for this boot.
You can get them in brown leather,
black leather, comfortable sole like the rest of their boots.
And Brunt has a try it on the
job guarantee. Wear these on the job.
And if you don't like them, you can send them back. That's
pretty darn cool. Not a lot of companies do that.
I have a coupon code that you can use
on your first purchase from Brunt.
It's not just the boots. It's for other stuff as well.
Well,
um,
Check it out. Link's in the description.
Thank you Brunt for supporting this video.
We ended up getting extra
cattle panels for the
garden build and I've been
pushing them around trying to figure out a spot for them
so they can live over here out of the way
in extra posts as well.
Speaking of over here and out of the way, we've got a water
containment, water catchment,
big water reservoir container that I'm going to
eventually put over here.
So it makes sense to just go ahead and move it over here.
So the plan with this is I want to use some of the beams
that I've been stashing off on the sawmill to make
a small scale timber frame platform or stand for this to sit on.
And whatever the highest elevation is here in the garden,
which is that corner over there, we'll go a little bit higher than
that and we can fill this and then gravity feed.
to water the garden and the way we're going to fill
that the plan anyway is to use some type of
solar pump over here in the pond the small pond
that i've been digging it's not a stinking pond
it's a watering hole this needs to be i wanted it
to be like three times as large but i blew a
hydraulic hose line when i was digging this out with the tractor
so no priority to get it finished
dug out i have a relative with a backhoe attachment
on the back of his tractor and he offered to
Let me use it to finish this out. It's a low priority.
A little feedback on this though, when I first dug this,
we were worried about it, you know, going dry.
It's about two and a half, three feet in the middle.
And it never went dry.
We actually went through a nasty drought this past summer,
and as it is right now, we're still 18% below average year over year.
So the past 12 months from today's date, we're close
to 20% below average for the rainfall, and this never dried out.
I think it was...
August, September, and into October,
we didn't get rain for what felt like two months, and this
never dried out, which was fantastic.
We have a pretty high water table here, so
if we make this even larger,
that'll be even better as far as holding enough reserve water
that we can pump into the garden.
And then I want to use this water more so than city water anyway,
because of all the stuff that they put in the city water.
We'll use a solar-powered pump to
Pump it from here into there, maybe set on a timer.
Maybe it's a manual situation.
I don't know, but it'll get over there
and then she can water at her convenience.
Another concern that I had with this was,
are we just simply breeding mosquitoes with
this?
Someone else mentioned that in the comments.
Maybe, but I don't think there's any measurable difference.
You know, we live in the woods.
There's mosquitoes no matter what we do.
It's not that huge of a deal.
I don't think we were crazy bad with mosquitoes this year.
And as a matter of fact, we increased the population of things that
Destroy mosquitoes and eat mosquitoes.
This became like a dragonfly haven.
There were so many dragonflies around here, and Grace was having
a good old time playing and chasing them all summer long over here.
So while we may possibly have increased the amount of mosquitoes,
we definitely did increase the amount of other insects
and other things that eat those mosquitoes.
I've also been splitting over here where the rest of the wood is.
A little bit thicker rounds
because this stuff's not as knotty splits a little bit
easier, well a lot easier. So we're just chipping away at it and
drop some pallets over here so we can stack
and store and stack and store and
stack and store. I think that's it for the pallet forks
though so time to switch over to the grapple
and start moving the majority of that center stack
and organizing it so we
so
that
way
we
have
our
essentially
our
front
yard.
Last night it got down to 34 outside.
The thermometer, there it is,
the thermometer says it's 55, 56 degrees inside.
Not too bad.
Not too bad considering the shop is like,
I mean it's insulated a little bit but it's very drafty.
And the last fire we had in here was yesterday morning.
The thermostat shut off, the fan thermostat.
Controlled fan shut off at 8 a.m. Yesterday morning. So we built
a fire in the morning got it up to 73 or something in here and
Yesterday's high was 58
so almost 24 hours pretty cold temperatures outside
Decently cold
and we dropped from 73 to 55 not too bad
It'll warm up to 70 in
here in 20 minutes.
There's 11:15 in the
morning right now.
I started
that small fire
this morning
Just basically a bunch of kindling pine
and put two branches on top of it.
This big diameter of hardwood
and then once that turned into some coals I put two
decent sized hickory splits on it and that's it.
That's the whole fire for the shop.
And right now it was it was a 56 in here this morning.
Right now it's a comfortable 70 degrees.
Right at 70 which means it is way easier
to heat this shop than it is to cool it.
It didn't take much energy to get this up to 70 today.
Our high is around 60 today I think.
65 something like that and sun
so I don't expect the shop to heat up any more than what it already
is from the sunlight but it should maintain this 70 degrees all day
and then tonight after the sun
goes down right before I go to bed I imagine it'll be like 66 in here
so I think we'll lose
about four degrees all day long without any heat.
Of course it's not really cold outside
and then tonight we'll get down in the 30s and it'll probably be around
Well, same as it was this morning, 56, something like that in here.
So not too bad considering the amount of, you know,
the volume of space in here and heat rises.
The peak of the shop right up there, that's 20 feet in the air.
The walls are 14 feet high.
So the footprint of the shop itself
is 2,400 square feet plus the vertical volume of the space.
You kind of sort of subtract the amount of space for the apartment.
But...
We haven't turned the heat on in the apartment all fall yet
so it's been a comfortable 70, 75
degrees in there without any heat.
I think my computer actually heats the space quite well.
Well.
But that's exciting. We're gonna be comfortable in here this winter
and that feels good. You know
what else feels good? Making stuff instead of buying stuff.
These magnets you can get from
Harbor Freight. They're pretty darn strong.
Gotta like bend them off to pull them off.
And you get like, I don't know,
five or six of these for just a couple dollars.
And I saw one of these little gadgets
on someone's chainsaw where it's a magnet and it tells you how
far to make a cut and then go to your next one
and make another cut for your firewood rounds.
And I was like, I could probably make that.
So I took the screw off of one of these
and a piece of 10 gauge copper wire with the sheathing on it.
is extremely tight but it'll thread into those threads in there
and then it's strong enough
where you're not going to pull it off the magnet.
If I can put this on the end of my chainsaw I'm
going
to
make
some
firewood.
I
think
that's
what
I'm
about
to
go
do.
With
an
eight
pound
maul,
splitting maul, and I over strike with that quite a bit
because the handle is so long. I'm not used
to the handle. It's like a three foot handle.
And then switched over to a three and a half
And a half pound axe, which is more fun,
but I need the oomph going through.
Some of the stuff, the bigger rounds anyway.
It doesn't split off around the perimeter kind of
like a softer wood does. Not at 16 inches anyway.
This might be the very first, actually it is the
very first measured 16 inch batch.
But one log split up, feeling good. You know what else makes
me feel good? That being gone.
We've got a yard now. That's kind of cool.
One of the reasons why I wanted to do that is,
you know, shift it this way
because obviously it's right in the center of everything.
But when the house is built right here,
our driveway to it is going to be on
this diagonal. It's going to cut this off.
So the house and shop are basically
going to face each other and then the shop will be diagonal
right through it coming across the high ground.
And then we'll park somewhere on the north side of the
North side of the house. But anyway one
of the reasons I wanted to do that is
this is all starting to take shape long term.
So you guys remember me talking about the orchard
in several different places.
Initially when we first got the property we were going to clear off
this tree line up to the trail and where those trees were
that was going to be the orchard.
It's going to be behind our house. Then
An opportunity arose to where we got
that forestry mulched on the other side of the
shop and we're going to take these pines down
and as soon as the pines down we're
going to turn that into an orchard.
Pines are still there, just couldn't take them
down myself fast enough.
So we want to get this orchard started and what better place
than on either side of the driveway in between the shop and the house,
it'll be front and center at all times.
When we're walking from the house to the shop, we walk right
through the orchard and we want to pick something and eat it on the way.
That just sounds awesome, right?
So getting that out of the way allows us
to be one step closer to being able to plant
stuff over here. And you know what?
We've already got two plum trees over there where we initially
thought the chickens were going to go.
We haven't done chickens yet because
we've got too much on our plate right now
and don't want to bite off any more daily obligations,
which won't be much at all,
but I'm just not prioritizing chickens right now.
We want them just not right now.
So anyway we got all these logs moved and it was a really good
opportunity to go through all this stuff
and say if it's if it's not really really good usable stuff
just move on from it. Just move on.
Several of these logs the pine logs were just too far rotten
for me to even want to put on the sawmill
so we stacked them over there to burn. All the bark that
was off the trees we just I used the mulcher
on the back of the tractor just mulched all this back
Back down and.
Yeah, this was just dirt when I put the logs here.
There was no vegetation at all.
Now we've got all these nutrients in the ground.
We've got all this natural grasses growing back through.
Didn't spend any money at all on seed.
It's not perfectly flat. It's not perfectly level.
Who cares? I don't care anyway. Not right now anyway.
And I didn't burn everything, obviously. So over here I moved.
I made two more bunks of for logs.
This is my off cuts from the the first cuts from the sawmill
and I've got to add some more dirt over here.
It's starting to get a little bit muddy and
gross but what I've been doing
with these first cuts they sit over here for a little while before
I do anything with them so they're pretty much dried out
and I came over here a little while
ago and just started chopping them into smaller sections
and then I'm splitting these with a
hatchet for kindling for the uh for the stove inside
and that that's working out great because
I mean, they're really, really dry.
All of this stack is stuff that still ate up quite a bit with beetles,
but I'm calling these beams.
Every one of these, I'm not concerned about maximizing yield.
I'm going to throw them on the sawmill
and cut off all the beetle crap on them
and get a beam out of the center of it and just start piling up beams
because I'm going to be using the beams
for structural stuff around the property.
And especially now that the CNC vertical table is up,
I can do some big...
Big, small-scale timber frame joinery with the CNC,
which is really exciting to me.
This over here, this is very interesting, actually.
I didn't show it on camera,
but this is a hickory log that I used that big
Farmac F070W chainsaw to split right down the middle.
I wouldn't say right down the middle.
I kind of just free-handed it, and man,
that was the one cut I did off-camera where I said,
That sawmill is for special occasions.
I'm not going to use that often at all. It's just so
brutal. Interesting though, when I,
I remember when I offloaded these logs, the tractor really
struggled to pick them up. These are red oak.
These three are, and the tractor picked them up
with ease right now. So they've lost
that much moisture just sitting around for a little while.
They are cracked up and split up quite a bit,
but what I'm going to do with these is I'm actually
I'm actually probably going to put these on the sawmill.
Soonish, I think, and slab them up. And if the cracks are, you know,
somewhat interesting to where you can fill them with epoxy
or something like that, stabilize them and I'll keep them as slabs.
But if I split these up on a sawmill, if I cut these up on the sawmill
and they just splinter into pieces, well, then they're already.
First processed firewood, I guess you could say.
The new, I guess, refurbished burn area over here.
We've burnt over here several times previously,
but right behind the shop is where I want to do
all the burning going forward,
mainly because the garden hose is right there. So we're real
close to water right here.
It's easy to keep an eye on and it's convenient still. It's close
It's close to the shops.
We can burn stuff.
Probably going to pile this back up and get it going again later today.
And also there's a couple holes around here that are holding water.
Like Nolly's drinking out of a
hole right there. So this area stays pretty well wet.
So it's one of the later areas to dry out.
So it's a good place to burn.
And the north side of the shop, not exactly north. It's
Off on a little bit of an angle
so the morning sunlight kisses on it so it
basically doesn't have any mildew on it
for something that faces due north.
This is where I want to store right now just stuff
that I want to keep out of UV exposure like
spare tire and stuff that I...
I think everyone's got a pile like this where it's like you don't
have any use for this stuff but you don't want to get rid of it
because it's useful like thick wall
four inch PVC drain pipe. I can use that somewhere
for irrigation somewhere but in the meantime
What do you do with it? So we're gonna neatly organize
and put it all in the back of the shop.
I think that's it for me though.
Time to go cook some food and get on the computer
and start editing.
The cycle continues over and over and over and over and over.