Thanks to BRUNT for sponsoring this video! Get $10 off your first purchase at https://brunt.yt.link/Wr7Ror9 using code BPO3HOMESTEAD.
The saying goes: an ounce of prevention is worth a pound of cure. In this video, we are working on the pound of cure. We didn't spend any money on a weed barrier around the garden when we built it, and the weeds let us know. Finally, we have a solution that only costs calories and a gallon or two of petroleum.
PPO3 is supported by Timber King sawmills. For more information on my 1220 CRZ mill
or one of many Foley hydraulic options, go to TimberKing.com.
I want to show you guys something real quick. Do you see it? Do you see it? The door is open!
Beautiful weather at last. Today it's currently like in the 70s
and I think our high today is in the mid 80s which is like
Wonderful. And all of our wind is coming out of the north, not the Gulf of America,
so we've got like, I don't know, low humidity. What is this? What is this? I know what it is.
It's time to get some stuff done. There's a lot of stuff to do outside.
Got a load of wood chips with a bunch of river birch. I think that's what he called it. River
birch. I know it's birch. It's obviously birch. River birch and wood chips. I'm gonna probably
try and steal as much of this bark as I can. Birch bark is like nature's fire starter. It's
fantastic. Anyway, that was with one mix of wood chips that I've already moved around a little bit.
Got another load of wood chips right here that we're going to use and then three more loads
of wood chips over there. That is awesome. And you might be thinking, what are you gonna do
with all those wood chips? Well, I'm glad you asked. It is time to reclaim the garden.
I want to get this water filter unmounted, get this hose out of the way. We didn't reuse that as
much as we thought we would. And all of these weeds, all of these, this chaos that is all the
way around the perimeter, that's the big objective for today. Jamie's gonna go ahead of me and pull
all the stuff through the fence because we've got a lot of these like bigger weeds like this
that's growing up into the fence. So if she can get them pushed out to the outside like this,
come on now. If she can get those pushed out to the outside, it'll make my job cleaning these
out with the weed eater way more better, way easier. And then we're going to pile wood chips,
just pile, pile, pile, pile, pile wood chips to take over, to take back, I guess you could say,
the perimeter of the garden. Like I've said many times before, where we put wood chips,
we get no weeds. And where we put wood chips that are thin, weeds are coming through.
So anywho, that's the big objective for today. A few other small objectives. Number one, I kind
of ate a big breakfast so my belly's poking out and I just need to move. That's objective number
one, just move. Objective number two is kind of sort of the same, very similar up here on the
sawmill. Gotta knock all these weeds down, get all these weeds back, and then start chipping as much
of the stuff as I can. I pile all my sticks off the sawmill that are sized appropriately to go
through the wood chipper over here. And in order to clean up all these weeds, I need to chip these
real quick. You don't want to crank up the four-wheeler if the dog's going nuts.
So
if it's not convenient, you won't use it or do it. The mobility on this is very convenient. You
just lift this thing up, balance all the weight on that rear axle, and move it wherever you want.
Next up, we're reclaiming the fence line. Jamie's already got a good start over here,
although I think she's doing a little too much work for what's necessary. So I think if she can
come in front of me and kick all these out, push them down into the path, then all this stuff will
fold over and then I'll take one pass with the bomba light and the flail mower, getting real
close up to the edge, and mulch up the majority of it. And then I'll come back with the weed eater
and get whatever else is necessary. Also on the inside, we're probably just going to have to do
that, well, without the bomba light. I can't go through this side on the inside. I've got a large
flattening job to complete for my friends at Back 40 Customs in Tupelo, Mississippi. They made a
bunch of chess boards, epoxy chess boards. So I typically flatten all their epoxy stuff. I did
when I had my last machine. There's eight of these total. I've already done three when they were
here. We did some plywood shelves for their display booth. So three sheets of plywood made
two shelves, all snapped together joinery, tool-less assembly. What else did we do? We did a
bunch of ruler boards. Over here I got a stack of the rest of those, eight total, and then three
tabletops that are epoxy, and then three slabs. While they were here, I had some other woodworkers
in the shop. I would try to get those two together to kind of see if they could collab in any way,
but we did a sign for the Oxford Park Commission. So in Oxford, Mississippi,
they tore down an old park, used some of that wood to make a sign, and that's going to be on
display for the new park. And then yesterday, right when I got back from getting the heater,
I had a separate job flattening a big large tabletop, like 110 inches or something like that
by 44 inches, three inch thick solid red oak. Flattened one side in one pass, flipped it over,
flattened the bottom side in one pass. So this CNC has been wide open. I got to get these done
today. In two hours, I got a family reunion that I have to cook potatoes for, mashed potatoes for
that, and then get back from the family reunion. I'll probably jump back on the CNC and cook a
and get the rest of the CNC stuff done, and then it's going to be picked up tomorrow. As soon as
all this stuff is picked up, then we're jumping back on the chips. So a bunch of busy work.
I've developed a slight addiction to these lifesaver experiments.
This video is supported by Brunt. Got a recommendation for you. These are a very
lightweight but durable work pant. They're the Costello Tech Pants. I'm actually wearing the
same thing in shorts today. Anyway, Costello Tech Pants, they're stretchy where they need to be
stretchy. They're durable. It's woven in two different directions. There's rip stop technology
that they call it, where if you do get a rip, that rip is not going to spread. There's some
more reinforcements on the pockets where you typically put stuff. The right thigh has a
pocket, which is super handy. Anyway, I've tried a lot of work pants over the years. Blue jeans
don't hold up. The big thick canvas style work pants, I just don't. You just lose so much mobility
in them. These, like I said, they're stretchy where they need to be stretchy, and you don't
lose mobility. You still have flexibility with these, and I don't feel like if I do bend over,
I'm not going to rip them because they're so tight. Work pants need to be flexible. They need
to move with you so you can keep moving. Anyway, I really like these Costello Tech Pants. Check
them out in both the pants or the shorts. I'm sure you'll be glad that you did. If you want to
save a little bit of money on your first purchase, I have a coupon code that you can use through
Brunt, and yeah, save yourself a little bit of money. Thank you, Brunt, for supporting this video,
and now we move on to wood chips. I am about to hop on the tractor and spread some chips for Jamie
around the garden perimeter, but I want to show you something. Something that I'm really excited
about for this winter. Check this out. This is our heater that we're going to be using in the shop.
I'm going to install this in just a little bit. Not today. So it's made by a company called Toxic
Fabrication. This is their production model, and they just, every one of them, you can include a
little name tag. So we put BPO3 on there. Just kind of stamping this whole venture, you know
what I'm saying? Anyway, it's a double barrel heater, reverse flow. So the main chamber reverses
into this chamber, and then exhausts back up through the front, and all those pipes are a heat exchanger.
On the back side, the heat exchanger is already mounted. The fan is, and there's a thermostat right there.
So the fan cuts on, or turns on, when the upper chamber, the thermostat, reaches 110 degrees,
and then it shuts off when the temperature drops below 90 degrees. So, so long as there's heat in
the upper chamber, and that's got a power source, then the fan will blow and circulate air through
the shop. I'm also going to put this on a switch. That way, if we're entertaining or whatever, and
have a table in front of it, we don't want, you know, air blowing right in our faces. We still
have the option to just turn the switch off. But, you know, we've got a bunch of wood around here.
Might as well heat with wood, you know what I'm saying? That, of course, took longer than I expected,
as usual. Thought we could get it done in one day, and ended up taking two days.
But the entire perimeter has got a mound of wood chips all the way around it.
That should drastically cut down on the weeds starting next spring. And yeah, there's a lot on
the outside. We're going to build up a little bit more on the inside as well. We've got a little bit
left on this first pile, but what do you think? Good so far? I don't think so. I think it rains
and pushes down a little better. I got tired, so it didn't make it perfect. Well, it looks good.
Looks really good. There is, whoa, there's a hole. I just stepped in. There's that.
Yeah, looks really, really good. We initially planned on this being the chicken area, and we're
not. I mean, plans keep changing, so we're not entirely sure on this. But in the meantime, I need
to get that pole out of the ground so I can keep this mowed down a little bit better. And I think
these plum trees are established enough to where we can take the poles out, and I don't think the
dogs will plow through them anymore. So I may end up getting rid of these poles in the next few days.
But yeah, we got a solid amount of wood chips all the way around here. And the rest of the wood chips
that we have on hand, we're going to keep piling on the inside, especially where the weeds were
thick on the other side over there as well. And we've got this one panel over here kind of set
in place. We never did attach this panel because we're going to put a gate right there.
Just haven't gotten around to doing that. And there's really no need for the gate just yet,
but we know it's going to be convenient when this is a little bit more established and the
house is right here. That'll be like the quick gate to get in. And then also, it's a quick gate
to get to this log bed, which these rows of Sharon's are doing great. This is some transplants
from a friend of ours, Nathan, and these are doing great. There's five of them, two on this side,
two on that side over there, and then one over there in the middle back. But like we did earlier
with these wood chips around the perimeter of this to stop the weeds, it's been about,
I don't know, maybe even a month ago we did this and no weeds are coming through, which is
fantastic. So this ends up being, this whole section ends up being a proof of concept for a
lot of things we do it seems like. That worked to really stop the weeds on the perimeter,
so that's why we did it over here. I think that's it for me today. It's Sunday, so Sunday evening
I'm going to go chillax and do a whole lot of nothing for the rest of the night.
I'll talk to you in the next one.