892. Complete Guide to Trimming with Hsin-Chuen Lin Part II~ Centering & Tap Centering

Hsinchuen Lin
205 followers
37 Video Views·Apr 29, 2026
To see or buy my finished work and pottery tools, please visit my Online shops:
https://sawfish-endive-kgks.squarespace.com/shop
http://www.etsy.com/shop/hsinchuen
http://www.etsy.com/shop/hsinceramics
http://www.etsy.com/shop/hsintools
To watch more of my YouTube videos, please visit my channel:
http://www.youtube.com/@hsinchuen
To learn more information, please visit my Website:
www.mypots.net
Instagram: @hsinchuenlin
Facebook page: Hsin-Chuen Lin Ceramics
Pinterest: @hsinchuen6518
All right and now how to put your piece. It's like a drawing. You have to put your piece in
the center to be able to trim it more evenly. Okay so how do you put it in the center? Here
this is the bed that my bed I designed. So it has a smaller gap in between so it's
very easy for you to find. Just using the smaller gap and you can find it
easier if your piece is very centered when you make it. Okay if your piece is not very centered
it's probably a little bit hard for you to find a perfect center. Okay all right all right so
it's fairly centered already. Okay so that's how you check it. Oh there's another way to do it.
The professional people they do that. They let it spin and then hit, hit, hit, hit, hit, hit.
This is called tap centering. Okay and you get it going to the center. Yeah that's called tap
centering. You need to know when the offsetter comes to here like here right. My finger is a
reference right here, here, here, here. So you have to find the timing from here to
come across to here and then the distance from here you have to match. Okay hit, hit, hit, hit,
hit, hit. That's how you match it. But it's very hard to learn it this way so you have to
put a lot of time to do that. Let me show you an easier way for beginners.
It's try to find the spot that is off and then we just push that in that direction.
How you do that? Get a sharp tool, hold it in your hand, find a very steady spot. Don't put
your hand up hanging up in there because your body is moving right. So what do you do? Place
in the tool somewhere and then spin the wheel right. Scratch, scratch, scratch. It's always
because my tool is not moving right so it's always scratched on the same spot. Once it scratches the
spot here to here is where it touches the tool right. So the middle of the line is the spot that
is of the center the most right. So that is the direction I'm going to push. So where's the middle
right here. So this is the direction I am going to push and here is the center right. So that's
the direction. So I turn the wheel back to my position and usually this is what I do. Get one
finger here on the end and one other finger there and the thumb in the middle. So this is the
direction I'm going to push right and move a little bit and then you check it again and you can make a
mark maybe a little bit under right. So here's the mark here to here in the middle right and then
I do that again and remember when you push the clay into the center in the right direction
your line is going to become longer and longer until you can draw the line the whole circle around
here to here right here. So it's a trial and error trial and error here. So I pushed it a little bit
too far so once you get closer to the center you might want to just move a tiny little bit okay.
Otherwise you might push it up to the other side of the wrong direction right.
Right see that. Let's draw the whole circle around it. So that's how you find the center okay. One
two three four five six. Six try okay. Takes about a minute. So not bad okay not bad. So that's how
you how you do it okay. Versus of course you could do like this but then you have
practice on maybe a couple weeks unless you are very talented. You can learn it within
one day okay. One day one of my students she learned it in one day okay. So but then you have
to devote it to the whole session just by doing that centering which not everybody is going willing
to do right. Okay and then once you find a center make sure you're going to hold a clean position.
So get the clay coil here and then hold it down. Make sure you hold it down otherwise
if you don't hold it down you push you push it away you have to reset it again okay.
So hold it down and first I would just slightly push the clay just slightly okay slightly.
And then once it's all in the position then you want to do a better job on secure
so that the clay is going nowhere and your piece will be more secure on the bed okay.
So that's how you set it up okay right. So that is finding the center.
