890. Complete Guide to Successful Throwing with Hsin-Chuen Lin, 3S~Speed Control, Slippery, Support

Hsinchuen Lin
205 followers
254 Video Views·Apr 24, 2026
To see or buy my finished work and pottery tools, please visit my Online shops:
https://sawfish-endive-kgks.squarespace.com/shop
http://www.etsy.com/shop/hsinchuen
http://www.etsy.com/shop/hsinceramics
http://www.etsy.com/shop/hsintools
To watch more of my YouTube videos, please visit my channel:
http://www.youtube.com/@hsinchuen
To learn more information, please visit my Website:
www.mypots.net
Instagram: @hsinchuenlin
Facebook page: Hsin-Chuen Lin Ceramics
Pinterest: @hsinchuen6518
And this other side, I already have several.
So when I'm placing my clay there,
I have a guide and then make sure the clay is,
the more center, the better, okay?
So that is, you want to win in this beginning.
If you are placing your clay here,
it's gonna be super hard for you to try
to move the clay toward the center, okay?
So make sure that you place the clay in the center
and then make sure your clay stick onto the pad, okay?
So in the meantime, you slap.
In the meantime, you make sure the clay
stick onto your pad.
So that's good and ready to go.
And let's check the speed, okay?
So if you push the paddle all the way,
this is like 100% of the full power.
And I personally don't recommend you,
when you throw, with 100% of full power, okay?
Because the faster the speed,
also the harder the clay is gonna work on your hand.
So it's more force.
You have to have more force to push the clay around.
So I will reduce the speed of the wheel,
maybe just like 50%, okay?
Like 50% of, that's all, okay?
You don't need to go super fast, okay?
This paddle that is holding it in position,
so once you get your foot off, the wheel's still running.
And I recommend you keep the wheel running all the time
so you don't need to readjust it.
I know that when people doing this,
and they go, and then when they stop, they stop,
and then you have to readjust it.
So just forget about it.
Just once you got your speed, the speed you want it to,
just get your foot off and then put your paddle away
so you will be able to focus just on the top,
especially for the beginners.
So speed, and then when you're pushing the clay,
see that this clay is super dry,
so it's actually create a lot of friction.
And the friction is not your friend,
so you wanna make sure that it's slippery.
So what do you do?
Add water, okay, add water to your clay.
Not your hand, okay, or to the clay.
And I don't recommend you use a sponge
because when I throw, I don't use a sponge at all.
So because when you're using the sponge,
you're gonna drip a lot of water,
and the water is actually not sticking on the surface.
It's going to your splash pan.
And later, you're gonna end up with a lot of water
in your splash pan, okay,
which is like a flood, and it might come out.
It's very messy and all over the place.
So just use the water, that is enough.
So what do you do?
Soak your hand, right?
And then you brush it, that's all you need, okay?
So slippery, and then when you push the clay,
make sure that you have somewhere to brace it on.
Maybe the splash pan, okay, splash pan here.
Or if you feel more comfortable with your left going up,
some people do put a brick or something
that they can raise it up, right?
They can raise it up right here.
So you have something to brace it on.
That will be more strong, that will be more strong.
So like that, right?
So that, this is one direction.
The ball is pushing the clay onto the center.
This is the center, and push here, right?
That's my left hand.
And how about my right hand?
Here, brace it on here, and then one direction here,
push toward the center.
Okay, so now we have two pressure point here and point here.
And I'm gonna use my third pressure,
it's my right fingertip, not the left, not the left.
Why?
Because the left is against the direction of the clay
that is running to my finger.
So I'm gonna use my right fingertip.
So it's forming like a triangular.
One, two, three, right?
And all the pressure, even pressure,
and squeeze the clay, and coning it up.
And you see that?
I don't move my hand very fast, right?
The key is make sure my hand is very steady.
While I'm doing so, my hand stays in the position.
So it's finding a good supporting point
to support when the clay is not even, right?
You see that clay is not even?
My hand is moving around because it's not strong enough.
So hold it together, and then slowly let go.
So this part here, from this point to this point,
is almost very good already, right?
Question?
So when I try this step, so you're using your left?
No, no palm.
Okay.
Okay, and a lot of people try to do this palm, palm,
and then do that.
This is not very efficient.
You see that?
You force this way.
It's easier this way, or easier this way?
Because your palm is this direction, right?
It's easier this way, not this way.
So people do this, it's not efficient.
And also, when you are using the palm,
you just feel all your forces.
So basically, okay, let me wipe it, okay?
This is what my finger is forming right there.
That, there's no clay here, right?
So this is my right hand,
and actually I'm curving my hand when I'm moving, okay?
The palm is not touching,
so that you transfer your force, right?
It's clean, right?
This part here is clean, okay?
So, and then here in the very corner,
I'm going to try to move the clay.
So you can put your both fingertips there,
and then bring, move the clay, move the clay.
Bring it toward the center.
And now, once you cone it up,
you don't need to cone it up very, very tall, okay?
The cone it up is to make sure
that your clay is coming toward the small center.
It's not that you need to go up too tall,
and then come down, up.
You don't have to do that, okay?
And now, once it's going up,
I want to come, move my left hand here,
toward the top, and then push down this angle.
Not here, okay?
Not like that, not like that, okay?
This angle, slightly angle, and then push down.
This is my left hand.
Left hand, down, down, down, down, down, right?
This is my left hand.
You have both hands, so when you're pushing down,
pinch the right hand, you pinch,
and then you push down, down, down, down, down, down,
and let go.
So that is the mind-forming process.
And the people doing that, that's fine, okay?
But my way of doing it is, this hand is my brazing hand,
so my right hand is actually more powerful,
so I'm brazing here, so I can move my clay here, right?
Move my clay here.
On this part here, it's empty, right?
More of my right fingertip is moving the clay, okay?
One more time.
Off.
First, braze it, right?
You see that now, clay is moving, right?
If I keep on dancing with the clay,
you could never get it to center,
so your hand has to be very strong, right?
So I braze here, braze here, right?
And then, now, I'm holding the clay.
See that?
Now my hand is not moving, right?
Hand is very strong, right?
And the bottom is slightly moving.
Pinch that in.
You have more clay here, remove it,
so it's not in the way of pushing your hand, right?
So three triangular, one, two, three,
and you squeeze it up,
and then push down, up here,
and pinch, pinch, okay?
And then slowly let go.
So this is the centering process.
The key is support, okay?
Finding a very good support,
and using the pressure that is even pressure.
You go up, and then you go down, okay?
And then once, you need to get 100% center
before you go to the next step.
So if today you could get a center for beginner,
you could get a center without any trouble,
I will give you an A plus, okay?
Center, okay, just center.
Focus on the centering, okay?
If you have a center, then we can move to the next step,
which is what I'm gonna do
to show you the whole process of throwing, okay?
First, you need to identify if this piece is centered or not.
So you can lean back further out
and then see if the piece is moving.
This is good, this is not good, right?
You can tell easily, right?
Okay, so this is good, okay?
Now, ready to go.
I will reduce the speed of the wheel a little bit,
50%, I will reduce to like 40% now, okay?
And then I will make the top flat.
So slightly push, make it flat,
so that I can have my finger
to go through from the very center.
You could do one finger, two finger, three finger, okay?
So beginning, I usually use my right thumb to do that,
the right thumb to do my opening.
And put my right hand here and then right thumb
to just drill from the center, right?
Push down and drill.
Okay, that is my right hand.
How about left hand?
Brace it, okay, brace it, helping it.
So initially, I drill a hole
and then I will open up a little bit
using my thumb to kind of grab the clay
slightly toward my right hand side.
So forming a small cup shape in the middle.
And then here, I will drill deeper,
especially when you have something that is taller,
you are going to use the other hand to help it, okay?
Because your thumb is only this long,
you cannot go all the way.
This is small, but when you have a larger piece,
your thumb is not gonna be long enough.
So might as well just use the other hand
to practice it along.
So this is how I do it, okay?
And you see that when I'm doing it,
I try to recycle my slip
so I don't have a drip of water in my splash pan at all,
because I recycle and I just got enough water
to keep it slippery.
Now, here, again, I'm gonna brace here,
always brace it on here.
And then this hand, all the fingers, right?
And drill from the very center.
In the meantime, my hand is going to compress the wall.
So here, I put my thumb to brace it along
and the right hand is bracing on the splash pan
and drill it down, down, down, down, down, down.
Until, I would say maybe at least quarter of an inch,
okay, quarter of an inch.
You don't widen it yet until you reach the very bottom,
the right thickness.
That's what I usually do, okay?
A lot of people try to widen it.
No, just get to the right thickness
before you make it wider, okay?
And how can you tell if that is the right, correct depth?
Get a needle tool and poke it right there, right?
And then get your finger, hold it right there,
and then put the finger there on the mark, right?
So from the tip to my fingertip,
it's the thickness of the clay, okay?
So that is a good thickness.
And then how about a little hole there?
And once you go back there and then you just compressed it,
the hole will be, after you press it down,
the hole will be gone, okay?
You don't need to worry about the hole.
Recycle my slip and brush it on the inner part.
Now, I want to make the base wider.
Usually you want to start with making a cylinder
when you practice on.
Make the cylinder first, okay?
So you're gonna get an even wall cylinder.
So what I will do is get my fingertip the same position,
and then I will bring the wall, bring the base sideways.
And that's what I do, okay?
Bring sideways.
So brace my right hand here,
the tip and bring the base sideways.
Okay, bring this sideways.
So the floor is level.
And you can go back there and then compress a couple times.
Okay, so that is the floor.
And you can compress it.
Since this is not too tall,
you can use a thumb there to compress it too.
Or you just use a finger, just move the finger slowly,
and then pull your sideway here, right?
So that is the opening process.
And again, just enough water, water, water here, right?
Okay, so that is opening,
and now ready to lift up the wall.
So this is what I'm gonna do.
Just use my thumb and the fingertip, pinch the clay,
and then I'm gonna grab the clay and then slowly move up.
Okay, watch.
Here, pinch and then lift it.
But now you see that my left hand is not stable,
not very stable, right?
What do I do?
Get my right hand here to help it.
So I place my thumb onto my right hand,
and my right hand connect to the splash pan.
So this position is very steady, right?
Right, pinch and grab the clay,
and slowly, one rotation, I go up,
one rotation, I go up,
and then slowly let go.
So where a larger piece, you will do differently,
okay, do differently.
So you see that this is the moving up speed
according to the spinning speed.
So usually I'm looking for about quarter of inch,
each rim, the space, okay?
And then put the slip back to work,
and now I have a bit of a clay hanging right here
in the corner, right?
So what I would do is try to use all the clay.
So what I do, again, this fingertip,
and bring the clay here,
move it in, okay?
So not too much clay hanging out here.
And then you get cutter,
get cutter to make your wall straight,
and then you compress the rim.
Every time we pick it up,
you lift up, compressed it.
The shape looks like an H, okay?
It's an H shape.
So you pinch here, and then this end,
slightly squeeze it,
compressed it to get it level.
And then again here,
brush the slip,
a bit of water outside,
and now my thumb is a little bit too short
to reach to the very bottom, right?
My left thumb is only this long.
So what I do, extending my thumb,
and do this, okay?
This fingertip is pointing to my left,
and right here.
Extending my thumb,
the same way that I grab the clay,
grab the clay, squeeze it,
and then you pinch it up,
and slowly let go,
and compressed it.
So you see that I'm not in a rush, right?
I do very calm,
step by step to move up the clay.
And then I brush that slip back to work,
remove it,
and for the outside,
a little bit of water.
And here, I have more clay on the bottom,
so I'm gonna pinch harder,
but here, it's thinner,
so I will relax my pressure.
So more pressure on the bottom, okay?
So now, I am actually push out
a little fat belly here in the corner.
Using my left hand, go to the corner
and push out a fat belly.
All right, fat belly.
And now I'm gonna move up the belly,
the same way that I just did.
Use my right thumb, and then this way, right?
This way, and then go in there
and squeeze and pinch the big fat belly up.
Which one, the left hand or left hand?
I use all of them, you see, all of them.
I'm pulling the belly up, okay?
Pulling the belly up.
You see that I'm pulling here on the belly?
This way is more efficient because you stagger,
so the outside hand's slightly lower than the inside hand.
It's that there is a belly, right?
And then you raise up the belly.
Right hand, it's just the thumb, so.
Well, if you are not using too much water,
a lot of people tend to use too much water,
and maybe three, four pour, it's already very soft.
The clay cannot stand up.
But my method of doing it is very limit of water,
so I could torture the clay, stretch more clay,
because I don't add a lot of water to it, okay?
So here is the, for you to be able to see this,
you will be able to see what my inside hand
and outside hand does, right?
So here, see that?
The thumb here and the forefinger is here, right?
The thumb here, forefinger is here, like that.
And why I'm doing so, because my elbow
can always press down to my tummy,
so which is more stable, right?
Here, and then inside hand, right there.
See it?
Right there.
Yep, that longest middle finger is facing my thumb.
But you see that?
All other fingers are touching the wall.
Not one or two, right?
All of them.
So when I bring it up, right?
See here, let me move this way so you can see
how my finger, right there, right?
Right there, and my thumb is drawing a straight line.
Drawing a straight line.
And also this method of lifting,
people tend to use when they are learning
from different instructor, they are working on,
this is three o'clock, six o'clock, right?
So they tend to work on here, three o'clock.
But this method of lifted, it's actually on the five o'clock.
The working spot is five o'clock,
because I need my elbow to tuck into my body.
Always finding my body as a supporting point and lift it.
So it's about like five o'clock,
between five to six o'clock, okay?
I don't know if you like this method,
but I personally find out this is more stable way
to pull up my wall.
There are tons of different method of pulling it up,
but this is my method of doing it.
I don't know if you like it or not, okay?
You can try it, okay, you can try it.
Yeah, mostly, yeah, it'd be equal pressure to go up.
Not back to here, right?
So I didn't push it up, pulled it up all the way, right?
See here, this is my finger, right?
And then I pulled it up, up, up, up.
And now it's getting very weak, very thin already.
So this part here, I need to be careful.
So I will start to make sure this part here
doesn't get wrinkles because I just stop right in the middle.
Okay, so our goal is to throw a straight cylinder.
And then after, maybe I'll throw it up
to like a quarter of inch.
And then after that, you're gonna stretch it out, okay?
So now it's fairly thin,
so I can start to make the shape.
Okay, so to make a shape,
usually there are lots of methods.
So I'm gonna do like tip to tip, like this.
So the inside hand is still doing the same way, lifting up.
It's a little bit dry, so I'm gonna add slip on my hand.
So now I don't put any of my outside pressure.
I'm just show you what the inside hand is gonna do, right?
Just my left hand.
And then two, push.
This is where my finger, right there, right?
Finger, finger, finger, finger.
Yep, I slow down a bit, okay?
When I'm shaping it, I don't rush.
I have a full rotation, I move up, okay?
So that speed of throwing process, usually what I do
is like 50% first, 40% opening,
and then pull up maybe 35%,
and then shaping maybe 25 to 30%.
This is the speed now, right?
So here, go.
See that?
Without the outside hand touching, right?
You can just shape from inside, and you see that?
That spot has no clay, that's where I touch the clay,
touch the wall, right?
So you see that?
All of them is touching.
Let's go and raise it up like that.
And here, there's a little air bubble,
that's why you see that this part here
isn't quite as smooth.
And actually, if you're holding the rib,
you can smooth it out and slightly bend the rib.
Well, you need to release the ear first.
Slightly push out, push out, push out, push out.
Okay, so that is it.
Same pressure, yeah, same pressure.
And also here, if your rim is not even,
which is usually the case for beginners.
So let me show you how you remove
to make sure your rim is even.
So you have this needle tool.
What you wanna do is hold your needle tool
on the same position.
So make sure you brace it here,
and then you're gonna use the needle
to push against the wall, against the rim, right?
And you're gonna go little by little, little by little.
If you could, stabilize.
Now my right hand is stable, right?
But how about my left hand?
I could put one of my finger inside
to put the support on behind the wall
and where I'm going to push.
Right there, right?
And the thumb here, behind the wall.
Once my inside hand feel the tip of the needle,
let it rotate, full rotation,
and then you can lift it up.
Or you can stop, you can stop the wheel too.
Now it's open, and you stop the wheel.
Just take your time, take your time.
As long as your hand is very steady,
just keep on going right here, right?
See?
Go, go, go, go, go, go.
Touch up, and lift it.
No rush.
And people tend to like try,
you need to get clear time to respond to your pressure.
So people tend to like, I wanna go right away.
No, you have to do it slowly, right?
Slowly, right, slowly, slowly.
See how slow I'm pushing my needle, right?
Slow, slow, slow, slow, slow, slow.
See?
Go.
Okay.
Okay, so that is how to level it up.
And usually, after that, you get this,
and then you compressed it.
You make your rim nice and round, okay?
Or if you want your rim to be thin looking, squeeze it.
So you can change it, change it.
Now, that skirt of clay,
usually you wanna chop it up later, okay?
Chop it up so that the one you are,
especially if you wanna remove from your wheel
and move it to the bowl,
that skirt of clay is gonna affect you.
So my suggestion is chop it off.
To chop it off, this, the tool,
it also come with your basic kit.
Might not as sharp as this.
So if your wooden knife is not sharp,
just get a sandpaper, you sand it so it's sharper.
When you are cutting it, again,
place your arm somewhere where it's stable,
and then just follow the angle of the side of the wall.
And again, give your clay time to respond to your pressure.
And you do this slowly.
Slowly, slowly, slowly, slowly.
Right, I hear the sound.
Pull out my knife.
And then, if you don't have a sharp knife,
you can use a needle.
Use a needle, hold it more horizontal,
and go insert it until you see the tip of the needle.
Pull out and cut it.
So you got that skirt of clay, cut it off the corner.
And then, this part here is dry.
You can wire it off, you can pick it up easily, okay?
Even without messed up.
Okay, let me show you how to do that.
The key is, this part here has to be dry.
So when you cut it, it's dry,
or you can use a rip to scrap up all the slip.
If you have slip there, it's gonna slip off your fingertip.
So you'll mess up the rim,
especially this part here.
But if that part is dry, and your finger,
make sure your finger is dry,
and it's very easy to lift it.
Right, wire, push against, and then you wire it off.
And just put your finger there,
and you can pick it up easily, right?
Without messing up.
And you can transfer it to a wooden bed,
and smaller bed, and you can store it,
or wooden bowl, you can store it on the shelf, okay?
So it's very easy to do without messing it up,
because your hand is dry, and the surface is dry,
so it's fairly easy to remove it.
If you don't have the bed like that,
or the bed is too big to occupy that space on the shelf,
transfer it onto the wooden bowl, okay?
Right, so now, let's cut it open
and see how the wall inside look like.
Okay, so that is how the wall inside look like.
All right, any question about the process?
The key is center, center, center, center first.
Otherwise, when you open it up,
if you don't have center,
you're gonna open up with the one side thin,
one side thick, so when you pull it up,
your hand is not gonna go like this,
because when the thicker part here open up,
you close up like that,
so it's super hard for you to lift it up.
So make sure you have your center first.
And for beginners, I will recommend you use a soft clay.
Use a soft clay, it's a lot easier,
especially in the centering process, okay?
