863. Basic Throwing for Beginners~Palo Alto Art Center 1st Class Demo / Always Remember 4-Ss

Hsinchuen Lin
205 followers
1.2K Video Views·Jul 22, 2025
To see or buy my finished work and pottery tools, please visit my Online shops:
https://sawfish-endive-kgks.squarespace.com/shop
http://www.etsy.com/shop/hsinchuen
http://www.etsy.com/shop/hsinceramics
http://www.etsy.com/shop/hsintools
To watch more of my YouTube videos, please visit my channel:
http://www.youtube.com/@hsinchuen
To learn more information, please visit my Website:
www.mypots.net
Instagram: @hsinchuenlin
Facebook page: Hsin-Chuen Lin Ceramics
Pinterest: @hsinchuen6518
For the groin, you want to have something we call bat, B-A-T, okay, B-A-T, and we have
a couple of them here, right there in the corner, and the reason we are putting the
bat is that after you're done with them, you can just simply pick it up and then replace
with another bat, and you can keep on using the same wheel, that's the main idea of using
the bat.
And for setting up the bat, these are a little bit different.
So for this kind of a wooden bat, you need to have this bat gripper, wet it so it's soft,
and you want to put this one on here.
The reason we are putting this is that this bat, the hole has become loose after years
of use, the hole is getting bigger.
If you don't have this, when you're doing the throwing, your bat might be moving, shifting.
So this is called bat gripper, so it's helping your bat to stay in position.
And then all you need to do is put it on the bat pin, and once you're done, just pick it
up, pick it up.
Because this kind of a wooden material, it actually warps, okay.
If you see it, it's warping one direction.
So if you're putting it on, make sure to bump it up on top of it, instead of this way.
If you do this way, sometimes it's not catching, and your bat might fly away.
So if you're choosing this bat, the bumping part on top of it, okay.
So this is the wooden bat, which I personally don't like that kind of bat.
This is the other bat, it's made from the plastic, and there are two positions, two
sides for the bat pins.
One is for the regular one, it's 10 inches apart, and you see that there are three dots
here.
So for our wheel, it's 10 inches apart.
You want to find the three dots here, and then you want to line up this hole here and
pop it in, and then you kind of wiggle it right here, okay.
Once you catch it, you want to apply a little pressure so that your bat pin is caught by
the pin, catching the pin, so your bat is staying in position, okay.
Do you use the gripper with this as well?
Yeah, you can use the gripper.
Sometimes if you don't use the gripper, it's moving around, it's kind of wiggle, this way,
so put the bat gripper, it's helping it, helping it.
Of course, you have a large one here, okay, large one, so you could use that.
So these are the bats that our studio provided for you, or you can use them.
To make sure that after you're done, put it back there, okay, clean up and put it back.
And sometimes if you are making the pieces that is very large, you won't be able to remove
from your wheel, then you can let it sit here, but if your piece is not very big, I would
suggest you just remove it and put it on a little wooden board or wooden tray, so it
will save some room on the shelving space, okay, so that's the bed.
Here is another bed that, this is my bat I designed, okay, and it's a lot stronger and
it's easier for you to throw it and without warping, okay, this is my armpit, so I will
do my demonstration using my armpit, and for the tool for beginner to throw with, usually
you will need maybe one needle tool and one knife and one rip, okay, and this is the cutting
wire for cutting the clay, and also there's another one, it's a metal rip, so mostly all
you need is probably these four pieces and maybe a sponge, so they all come with the
basic kit, if you have bought the basic kit, they have eight items in the basic kit, so
you have a sponge, needle tool, a wooden knife, a wooden rip, and the metal rip and the cutting
wire, okay, so basically you need it to this for the basic throwing, right, and now I'm going to
use that wire to cut the clay up, I will say a small amount of clay, okay, maybe I will say
this much, okay, this much of clay, about a pound and a half, okay, pound and a half of clay,
and when you are not using the clay, make sure you
tie it up with the tie, tie it up so that to keep the moisture inside, and then here is the clay
that is sitting in the bag, so sometimes it feels like hard, but once you kind of slap on it, pound
on it, it actually becomes a little bit softer, okay, that's very typical for the clay that
sitting and not using for a while, it feels like very hard, okay, or some people do this,
so you just pick up your bag of clay and then, okay, drop it on the floor a couple times,
this is called wake up of clay, okay, and you will feel the difference, okay, when you do that,
so slightly up, get some pressure to the clay, and you'll feel better, okay,
now before we start it, you could kind of form the clay on your hand,
okay, pound it like this, and the more circle-ish, the better, okay,
pound it on your hand, and then put your clay here in the center, okay,
to put in the center is very important, put your clay in the center, you want to win in the
beginning, okay, the first step, if you put your clay here, when the wheel spin,
when this wheel spin, it's going to go,
so it's going to be very hard, you see that, your arm is moving with it, so the best way is
get your clay to the center, okay, how can you find the center, if you have the
wooden bat, you have a wooden bat, very easy to find the center, just get a sponge,
you can make a circle, right, make a mark, so when you place your clay,
you place in the center, if you have the plastic one, get a pencil and draw some circles,
okay, pencil, so it helps a lot, all right, so that's the beginning, so make sure your clay is
in the center, the more center, the better, and you can kind of use the hand to spin the wheel
and check it, see which part is a little bit off, just slightly pound it, okay, this is called
and you adjust it, so your clay is more or less in the circle and also your clay sticking on your
bat, okay, so this serves two functions, you stick your clay on the bat and also you adjust it, so
your clay is in the center, it's a lot easier, okay, all right, so that's first thing, and then
spin the wheel, okay, and let's see here, this is the full power, right, so you push it,
the pedal here, you get full power, and I don't recommend you start with the full power, because
the faster the wheel spin, the more pressure or the ball are responding to your hand, so it's very
hard to control, so if you are beginner, I don't recommend you do the full speed, I will
reduce it to maybe like 75, 70 percent of it, okay, something like this, yeah, that is good,
and the pedal is going to hold in position, so you don't need to worry about,
you don't need to worry about how to control the speed, once you adjust it, just keep it going,
okay, just don't, you don't need to worry about how to control the speed, you want your speed to
be consistent, right, and then we start to add water, okay, so the surface, so water is to make
it slippery, but you don't need to use a lot of water, just enough water, okay, I don't recommend
you use a sponge to drip, to draw some water and then squeeze on it, that's too much, because the
water is going to your splash pan, so you don't need to do that, just all you need to do is soak
your hand in the bucket and brush it over, that's it, so there's no excessive water going down to
your splash pan, right, so that's the first, slippery, and then also you control your speed,
speed control, slippery, and then the thing is supporting, okay, so when you apply your pressure
onto the clay, the clay is going to push you back too, so you have to find some spot that is very
strong to hold your arm, right, so if your hand is like doing this, see that, it's going to push you
back and forth, so it's fairly unstable, what do you do, rest your elbow here, so when you push,
you see that, the clay is pushing it back, but you got a support here, so that is a much better
position, right, so try to lean your arm, rest your elbow here on the splash pan, or some people do,
they can rest up, if they have a block of wood, they can rest up their legs, and then they can do
that, right, it's even stronger, so use your lap to support it too, that's another way, so I talked
about three important things, I don't know if you remember, first is the speed, right, second is
water to make it slippery, right, and the third one is to find support, right, so S, S, S,
speed, slippery, support, always keep that in mind, okay, and now let's do the moving the clay, so
for put your hand more efficient, you see that, this is the force, so you want to use this force
to do that, you are not going to use this force to do that, you see that, there's no support,
if you're using this, it's wasting your energy, so what do you do, this arm is transferred
your force here, you see that, this angle, this bone is transferred this, so one, two, and three,
I will use my right fingertips, because the wheel's spinning counterclockwise, if you do that,
your fingertips, left fingertips will catch, will be catching into the clay, so use your right,
because it's right, it's more following that direction of the wheel, right, so forming that
triangular force, one, two, three, right, triangular force, and rest your arm here,
and squeeze the clay, and slowly go up, and slowly release your hands, okay, thus it's sneak away,
right, here, right, pull, re-push, if you let go, see that, start to get wobble, right,
because you apply the force, and then you also let go, so the clay doesn't know what to do,
so it got tensing, right, so sneak away, then slowly release your hands, so
thus force is speed, slippery, support, squeeze up, and sneak away, right, you cone it up,
now you want to push it down, therefore pushing it down, I will put my right hand here, again,
the same position, but my left hand is going move up to this top of the tip,
to push that down, okay, let's just use the left hand, okay, so what my left hand is doing,
it's slippery, so this is my left hand, pushing it down, right, you see that I'm embracing it,
so you see that, the clay is getting low and wider, right, right, so that is the force,
but you have two hands, right, so what the other hand is doing,
pinch, right, when you're pushing down, all together, pinch,
and you see that my arm is very good position, and the clay has nowhere to go,
right, so that's how you center, easy, right, okay, so let's knock it off,
all right, it's up center, it's dancing now,
speed, you see that I let go my foot pedal, so I don't worry about that how to control it,
right, just let it go, and slippery, support, get my arm triangular, one, two, three, right,
force, squeeze the clay up, sneak away, right, and move my arm, move my left hand here,
using this part here, push down, but wrap around my right hand, right, push down, and
you see that my arm is not moving, so the clay has nowhere to go, right, it's centered,
so that's how I center my clay, if you follow that, it should be very easy,
okay, very easy to do, all right, so that is the centering, now we're
done with the centering, and how can you tell if it's in the center, okay,
see that, the clay is not moving, right, see that, the clay is dancing, okay, or you can
lean back further away, and you can see that, if what we are spinning, and your clay is moving,
that is not in the center, and you have to get your clay toward the center before you do the
next step, okay, center is the very fundamental, very basic, it's very important, get your clay
toward the center, right, okay, and if you have too much clay, excessive clay in the corner,
I will use my right hand, right, just pinch it, right, and this hand can help it,
pinch it, and gather the clay toward the center, push it, right, push it toward the center, and then
clean it up, sneak away, a little bit of water, and compress it down with my right hand, very stable,
the clay has nowhere to go, okay, and one other thing that people might make a mistake all the
time is that they tend to make the top flat when they do, and when they push down, make the top
flat, and then when they cone up, see that, you create a volcano there, right, because you make
the top flat, so you don't, you don't want to do the top flat, so when you start it, always
make this, the center part a little bit higher, so when you cone it up, you don't create a volcano,
right, squeeze it up, see that, I don't create any volcano at all, right, okay, center, now I am going
to drill the hole, before I drill, you can make the top slightly flat, okay, just use my left hand,
right hand stay in the position, right, the top is flat, now I am going to drill,
the way I drill is, again, put my hand here on the side of it, I am going to use my right thumb,
just dig in from the center, right, and you see that, I always, this is the key, right,
always place your arm somewhere, and use my thumb to dig in the center,
you can also use both hands, right, both thumb, drill, and you leverage, okay, but you see that
my hand is still holding here, drill, and drill, drill, drill, right, so open the initial hole
in the center, initial hole in the center, now constantly add water to the surface, right,
see that, now my splash pan is still quite clean, because I don't have access to much water,
the water going there, right, but I recycle my slip, right, this is a slip, you can rip it up
from your finger, and just brush it to the surface, so slip stick to the surface, water doesn't,
water go to the splash pan, okay, right, and now, after I do my initial opening, I'm going to drill
using my left hand, okay, left hand, and start at this point from the center, right, but when I'm
drilling this way, my hand is too loose, right, not very stable, what do you do, put your hand
here, put your hand here, right, you see that, the whole position is all coming together,
right, and keep on going, drill it, drill it, drill it, drill it, all the way, until, I would say,
depending on how tall you want to leave your foot, I would say at least quarter of an inch,
okay, at least quarter of an inch, you can go, leave it up to half an inch, to three quarter
of an inch, depending on how tall you want to leave your foot, okay, so now, how can you tell
how thick the base is, stop the wheel, get your needle tool, poke a hole in the very center,
right, all the way, push to the back, and get your index finger, hold it here, put your index finger
all the way to where you touch the clay, and pull it out, right, so that is the thickness
of the clay, right, you could go slightly lower, so that is how you check it, how about the hole,
you just poke, once you go there, and compress it, the hole will be gone, okay, so you do not
need to worry about the hole, right, so I could go slightly down a bit, and do the same thing,
right here, so that is good, and you can double check again, right, you see that,
this is about quarter of an inch, okay, quarter of an inch, okay, so that is good, you do not want to
keep on going down, because if you keep on going down, you do not have any pattern,
stop going down, so what do you do, you are going to make the base, now the inner part is like
forming a v-shape, right, v-shape, but if you are making a cylinder, or some bottle shape,
actually you want to open a u-shape of a base, okay, so what do you do,
get your finger toward the center, and then just pull sideways, level, sideways, and again,
the right hand brace it, the left hand do the job, and you can put your hand here,
and you pull the clay sideways, sideways, sideways, sideways,
right, and you see that my wheel is not going super fast, right, you can actually slightly
increase, not too fast, but not too slow either, so that is a good spot, okay,
so I pull sideways, you see that the bottom now is flat, and you can go back there, and use the
fingertip from the center toward your right, okay, always toward your right, because if you
go across to the center toward your left, your fingertip is going to catch, going to get caught
into the clay, always work on if your wheel is spinning this direction, okay, work on from the
center point toward your right, get the fingertip there, and move slowly, slowly, slowly, sideways,
sideways, sideways, sideways, so now you see that the base is opening up, okay, and you're ready to
lift it, okay, lift it, slippery, right, if you don't have enough, get your hand in the water,
and just brush it over, now it's slippery, okay, slippery, and we're ready to lift the wall up,
okay, so what do you do, thumb is this, or this, right, so you pinch, okay, you pinch,
right, pinch, all the fingers inside, right, and the thumb outside, then pinch, and you are going
to lift the wall up, okay, slippery, dip the wall, and I'm just going to show you one hand, but
actually when you do it, so you could put your right hand here to support your thumb,
okay, but I'm going to just do, use one finger to support my thumb, okay, this way, thumb, pinch,
and you lift your wall, slowly, but very steady, right, you just pinch, and then you lift,
uncompressed, the top, okay, so that is the lifting, basically it's just the thumb,
because your piece is small, it's small, so you could do that, and lift it, and I'm going to brush
the slip to the surface on a little bit of water, right, make sure before, every time before you
work on your clay, you want everywhere to be slippery, okay, that is important, one of the S,
okay, all right, I would do that again, okay, do it again, because my thumb can still reach,
I'm worried about it, and pinch the wall, and lift it up, and slowly let go,
all right, so you see that, the wall, and this, see that, the mark, this mark is how my hand is
moving up according to the wheel, okay, so usually, you want to have like a quarter inch
increment, right, meaning one rotation, you move a quarter inch, one rotation, you move a
quarter inch, so more consistent, better, okay, more consistent, better, right, so that is the
lifting, right, and now we get to the point that my thumb can, it's no longer reachable to the very
bottom, but I still want to do the same thing, right, pinch, and lift it up, so what do I do?
Slippery, slippery, I am extending my right thumb this way, right, initially I was doing this way,
now I am extending my right thumb, right, see that, and this finger is holding the wall,
on the wall, no pressure here, pressure is the tip of my thumb, okay, tip of my thumb,
right here, see that, and pinch the wall, and lift it up, one full rotation, I go up,
right, and now you see, here, start to get wobbly, meaning that wall is very thin,
okay, it's thin already, so you don't want to keep on pulling it up, right, so this is the stage you
could do your shaping, okay, do your shaping, but before you do that, you can use the rib to
stabilize or compress the wall, so what do you do? Hold this rib, put your finger inside,
and push the wall onto the rib, and slowly move up, right, always, what do you see? My wrist is
here, supporting it, right, so you see that wall is straight up again, and then you can do the
shaping if you wanted to, push harder, okay, I'm not going to use my, actually you should,
okay, but I'm just showing you how the shaping is, so just get my hand, get it slippery,
so from inside, my finger is pushing out, right, okay, see that, you blow it out, blow it out,
and you have to do it little by little, okay, don't do it too aggressively,
right, so you blow it out, so you have this, and if you want to do
more beautiful surface, you're going to use the metal rib, okay, you push this
against your metal rib, and you see that, and now I have a support, so the wall is getting
more stable because of my outside hand, right, okay, so that's how you shape it,
and then you can trim the excess clay off the corner, okay, get the wooden knife,
you chop up from the corner, slowly, slowly, right, until you touch the back,
and you can get a needle tool, I personally prefer using my own tool,
okay, this is my own tool that I designed it, just go underneath,
and cut it until you see the tip, and you stop the wheel, okay, that's how much clay you can
remove from the corner, you can do the rim to make it better, five, if you don't have,
we have a material called, the same material as that you put it on the bottom, the back gripper,
we call chamois, you can use the chamois to run the lips, okay, you just hold it, and
here, two fingers, and you compressed it, and now you see that the rim is nice, nicely ground,
that's it, okay, so that's the basic throwing, so get your cylinder, and again, blow it out,
later on, I will show you how to do the bowl, but here, today, get your cylinder first, okay,
get it to the perfect center, okay, if you have a perfect center, I will give you an A plus,
okay, today, okay, the goal is to get a perfect center, okay, and then the rest of it is A plus,
plus, okay, plus, plus, so, but the beginner, beginning, can you clay into the center,
before you do anything else, okay, and here is the, the hand position, okay, let's do,
let's cut it open, so I didn't do anything on the top, actually, so this part here will be
a bit thicker, okay, and the bottom, you need to hold it, hold the shape, so it's also a bit
thicker on the bottom, but in the middle, it's fairly thin, very thin, right, so you see that,
that is the, the middle part that you stretch it out, so thinner, I didn't do the top, I told you
that, thicker, and the base, like, it's thicker, so to hold the shape, okay, so that's the basic
throwing, and for, I bring my other TA here, so you will be able to see the, the fingers, right,
so this is your cylinder, your inside hand is going to be, like, forming naturally, like this way,
right, so push, the inside hand is forming like this, and you go straight up, okay, when you lift,
and the outside hand, this hand, you see that I have a thumb here, and the four fingers there,
right, you see that, so you are going to hold your hand like this position, right here,
uh, this, right, so you are twisting, actually, twisting your arm upside down, like this,
and you pull, and the reason why I'm doing so is that the pulling point is the thumb and the
fingers inside, right, so your elbow is always attached to your body, so it's, which is most
people, so that's why you do this way, okay, instead of put your hand here, you are going to
throw at five o'clock position, right, this is six o'clock, you see that my thumb is at five o'clock,
so your elbow is always tucked into your tummy here, so you always have a very good support,
right, and then you do that, then you pull it up, okay, so that's the position, and if you're good
at it, later you can do something larger, taller too, but at the beginning, you just start with
that centering, opening, and lifting your wall, and if you like, after you lift your wall,
you can cut it open and see the section, and how, what, what, that spot that you need to put
more pressure to make it thinner, all the way, okay, you want to make it thin all the way,
from the bottom to the top, okay, so that is our basic throwing, and your clay might be a slightly
too stiff, okay, next week I will show you how to fix your clay, but today, I want you to try it
the first fresh bag of clay, that which is slightly harder, if you're not good at it,
you can make your clay a little bit softer, that will be easier for you to move the clay.
