How to Install Electrical Outlet to Plastic Cutin Box

VideoJoeShows
86 followers
5 Video Views·Apr 22, 2026
https://www.youtube.com/user/VideoJoeShows
How to install an electrical outlet to a plastic cutin box is easy...when you know how. Wouldn't you just install the electrical outlet in the junction box just like you would with any other electrical outlet? No! What?! You heard correct. Ha....You wouldn't be an electrician if you installed the electrical outlet to a cut in box that way......and you aren't (an electrician that is). Watch & learn VideoJoeShows you just how to install an electrical outlet to a plastic junction cut in box.
https://www.youtube.com/user/VideoJoeShows
One more thing I want to do before I push this in, because now you remember the existing
outlet box was flush with the wall. This one sticks out because of these tabs, right? So if
I push this in here, see these tabs right here? If I push that, that's going to set on top of
this box. That's going to bulge this out another 16th or so. And so the thought process is
if I screw this right on the box and if I put this on,
this cover might not fit nice and tight to the sheetrock wall. Sometimes they do, sometimes
they don't if you leave these little tabs on. And I don't want this cover to stick out of the
off the wall. So what to do there? These tabs, we're going to break these tabs off.
If you look at the tabs, there's a definite little score mark right now. You may think,
have you ever wondered what that score mark is for? Well, I'm going to take some dikes here.
There are cutters. I'm just going to put a little bit more of a score in there.
And sometimes you can get these off if you press hard enough, but you know, you just score it like
that. Then you take this just above the score, grab it and twist it comes right off. Okay. We're
going to do that because then this, this area here slips into this little notch. Okay. Supposed to
anyways, this, this area here is a little bit fatter than a regular plug. So I guess I should
check that because we may not have to pull those tabs off. Okay. If I look at that, that's three
quarters and I measure that and there's seven eighths of an inch there. So I know this little
area here, it's going to fit right into that little groove. And that's going to push this
plug up to the wall that much tighter. Do you see that? Okay. Let's just go ahead and get these
off of here. And I used to be able to cut those off, but you know, I'm not as strong as I used to be.
You score, it just helps a little bit. If you don't score that sometimes
the tip of that starts bending. All right. Take that, bend that back and forth. There you go.
Okay. Now I think we're ready to put it back in the wall.
