Installing a cut in electrical box

VideoJoeKnows
63 followers
18 Video Views·May 31, 2026
http://www.VideoJoeKnows.com Installing a cut in electrical box can be difficult or hard......you choose. "Joe" likes to do "this" to his electrical cut in box before he installs it. Installing an electrical box that is a cut in type, is a good way to install electrical plugs into an existing wall....try it. Watch as "joe" shows you a "different way" to install the wires to a cut in electrical box.
http://www.VideoJoeKnows.com
I just showed you a way to do that by cutting this
out all the way and slipping this wire into there, okay?
Well, I'm going to show you a different way to do that
to make it so that this wire is a little bit more sturdy
inside the box. Now sometimes you can do this next step
in certain areas, but if you've got four or five wires trying to put
back into a cut-in box like sometimes you do on certain boxes,
if it's a two-gang cut-in box or a three-gang or something like that,
you may not be able to do what I'm going to show you next.
But here's another option and it's probably a better way
to install this wire into this box.
You look at these knockouts,
you will definitely see there's a right way and a wrong way
to knock these loose, okay?
I'm going to take my screwdriver and I'm going to hit on this and see,
I got it right there. I got it loose.
Now I'm just going to take that and kind of bend that a little bit. See that?
That pushes the inside down just a little bit,
but I don't necessarily have to pull that out all the way.
Now I can take my wire and push it down into that and that makes a tighter fit
inside the box. If you've got enough room in your box to do that,
that's a good way because once it's in there,
it kind of holds onto the wire.
It's a little bit trickier to do it that way because you got to kind of fish it
in there and pull on it and stuff and it doesn't give you hardly any room to
left. Once you get the, once you get it in there,
it pulls it out from the backside.
So it's a lot harder to get your your plug and everything in there,
especially if you've got three or four wires, two or three wires in here.
Two wires. Yeah. Three wires is a little tricky. Okay.
That's why they designed that for a cut in box because you can't get your,
your staple in there onto a two by four inside the wall and that sort of thing.
Okay. So that's, that's the proper way to do it.
But I'm giving you some options that you may not have considered when installing
your wires.
