How to install an electrical outlet in a cut in box

VideoJoeKnows
63 followers
1 Video View·May 21, 2026
http://www.VideoJoeKnows.com How to install an electrical outlet, to a cut-in box, takes a little know how....if you don't want the cover plate to stick out from the wall. If you don't do this, to an electrical outlet in a cutin box...the cover plate might not be flush & tight, to the wall. Do you know the secret when it comes to installing an electrical outlet in cut-in boxes? It's really not a secret.....if you already know. It makes sense....if you already know. VideoJoe Knows.....do you?
http://www.VideoJoeKnows.com
There's one important point that I want to share with you right now.
One more thing I've got to do before we push this back into the wall. Do you have any idea?
I haven't talked about it yet and I don't know if you know this or not and if you don't
you might want to listen up on this. Okay this plug has these little ears on here
and that's designed for a regular box not a cut-in box but a regular box and then this
fits right up onto the sheetrock and it has more of a surface area in order to tighten this down
to the wall. We've got a cut-in box. We've got ears on there on the cut-in box little flaps
that hold this on there. Now if we screw this right on top of that these ears are going to
be on top of the plastic which is that much further out from the sheetrock wall right.
So if we do that we might have a tendency of having the cover plate not fit up tight to
the wall. Sometimes they fit tight sometimes they don't and there's a slight little gap there
and so I'd rather be safe than sorry. What I'm going to do is there's a little etched mark on
each one of these ears and I'm going to cut these off and bend them off so I can fit this into the
box. Look at the box right here there's a notch right there and there's a notch down here so when
I take these these ears off this plug will fit right down into that notch nice and flush right
up against the sheetrock. Okay bet you didn't even know that before did you? Okay right there where
that little line is I'm just going to indentate that a little bit more with my cutters and you
don't have to cut it off you can cut it off if you do it hard enough okay they'll come off but
if you can't do it that hard just score it like that and then you're going to take it back right
in there not too far away from the score but up kind of close and just bend it back and forth
and it comes right off. If you try to bend that right now without scoring this again it has
the thoughts of its own and it wants to bend up beyond that and a lot of times it starts
bending this whole rest of the plug area right there so you don't want to do that
okay so score that lift this up a little bit back and forth take that off of there
this one I'm just going to cut do it hard and there it goes
