How to Repair Paint Grade Door Bottom Edge...Part 6

VideoJoeShows
86 followers
34 Video Views·Apr 20, 2026
https://www.youtube.com/user/VideoJoeShows
How to repair a paint grade door bottom edge...Part 6 is what this howto video is about. VideoJoe is going to be installing the door adhesive to the open edges at the bottom of the door. Watch & learn as VideoJoeShows you how to apply the door mastic adhesive as he gets the door ready to attach the door clamps...Part 6
https://www.youtube.com/user/VideoJoeShows
It's got a little mastic on there. I'm just going to put it on in there. I'm going to do that a couple
times because then that keeps pushing the mastic down there further, you know. Now some of it
obviously is going to come out when I squeeze that together with the clamps. That's all right.
I've prepared myself for that and I want to get all that in there. I'm glad I got the masking
masking tape on the edge. Once I get to this point I don't want to go back and forth with
trying to keep it clean and everything. The thing with liquid nail is when you get it on
a surface that you don't want it's best just to leave it alone until it dries and then you can
cut it off. If it's got an edge on it you can cut it off with the sheetrock knife. You wipe it off
then it gets all in the pores of whatever you're working with. You're never going to be able to
like clean it off per se, you know, because it gets all over. But once you let it dry
then it's like hard as a rock and then you can just get it off. Now see I've got masking tape
on the top here so when I peel that masking tape off it's not going to get on the pores of the
paint. I won't be able to clean that off later without affecting the paint. I've just got a
little staging area for my caulking and I've got it pushed down and I just grab a little bit with
my putty knife and work it in there. Now I've got to take that out. See how it's spooging already?
It's all right. I'll get my little screwdriver in there and try to get try to pack in a little bit
more around that as best I can. Oh and this liquid nail dries. Look out. The other thing about
liquid nail is it's kind of smelly to a certain extent, you know, but it's not going to hurt you.
Open your windows or something. I wouldn't run an air conditioner because then you're going to
get into possibly blowing the fumes into other rooms. No, you can keep your door propped open,
your outside door, whatever. I mean it's not that bad. Okay, that side looks good.
Man, some of that's going to get on my clamps too, huh? I'll be able to work with it.
Okay, now for this side. I'm already starting to think how I can keep this
mastic, any overage off of my clamps. You know, I probably could put another
piece of masking tape over that before I clamp it. How about that? Then it won't get on my
my end pieces. If it gets on the end piece, you know, is it the end of the world now?
I can pull these end pieces off. That's what I like about these and then, you know,
clean it off of this or I could do it without that and just leave the metal, but then the metal
could leave an indentation in the wood. So I'll just push that back on. I'll use it that way,
I'm sure. But this liquid now, I'm not too concerned about this drying just yet. I've
got to kind of work sort of briskly. You know, I don't want to take my time too much,
but it's not like going to bond instantly. I've got maybe 10 minutes working time on here.
See, I'm just going to keep packing it when I think it's full and go over it again.
Go over it again. Push it in. I'm pushing it in. I'm pushing it in. I'm pushing it in.
Okay, I can raise the screwdriver up a little bit and go some more. See,
you don't have to have a contractor do this. I know you can do this. Have I showed you anything
so far that you don't think you can do? I don't think so. I think you could do this
in the comfort of your own home. If you don't like doing this, that's fine. You can
hire a contractor. He'll charge you, oh, I don't know, $50 an hour,
$35 to $50 an hour maybe, even if it's less than that. I mean, sometimes you can get lucky.
Maybe you get somebody who's off work and he'll do this for hardly anything,
you know, but he's still going to want $15, $20 an hour or more.
And wouldn't you rather save that and do it yourself? Because, you know,
you're probably going to have some other doors that are going to need this same repair sooner
or later. If you know how to do one door, that means you know how to do the next door.
What, you're going to pay a contractor to fix your first door and your second door and your third
door? You know where I'm going with that, don't you? It starts all adding up, huh? You know,
that's why I want you to learn how to do this. And incidentally, most things on my channel
I think you can do. I say I won't show anything that I don't think you can't do.
You know, if you can't do it, I'm not going to show it. And I stand by that. Because if I don't
think you can do it, what's the sense in me showing it anyways? What's the point? I want you to learn
and I want you to be able to do it yourself. You know, see what I mean about this mastic?
It kind of, you just have to keep wiping it off and stuff and it kind of wants to get all over
a little trick for you too. If you happen to get it anywhere, you gotta wipe some of it.
Wipe your finger first. Get your finger wet and it doesn't stick on your finger.
You know, that's what I do. I got that pretty good. Now, in those little areas, you know how
it was flaking apart? I'm just going to kind of, I don't know, sort of wiggle it in there.
I can get it in some of those little grooves. The rest of it is going to bond together and
I think it's going to help. And once it dries, it may have to touch up the corner a little bit more.
When I put the masking tape on, I put it all on other than the exposed area of that hardboard.
Okay, I think that's it for the mastic liquid nail. Heavy duty. That's heavy duty all right.
Well, see you could almost leave it like this if you didn't have the clamps,
but you got to get some of those clamps anyways. You're going to start doing some of the stuff
yourself. You need to start adding to your tools. If you're trying to justify, well,
you know, that's why I hire somebody to do all that. You know, the amount of money that you're
saving, you could go and invest in yourself. You could buy a few tools. Your tools aren't going to
cost as much as you were going to have to pay to get this fixed. Okay, then you'll have your tools
for next time. All right. And these clamps don't cost very much. The clamp I showed you, this clamp
right here, guess how much? 99 cents. You go look at the hardware store. You might find that your
hardware store, it might be $2. Okay. Do you think you can afford that? I think you can. All right.
What are we going to do next?
