http://www.VideoJoeKnows.com How to repair a damaged bathroom door....Part 3 Is your bathroom (or bedroom door) damaged & you're not sure if there's anyway to make the needed repairs?....or you're not sure how & what steps to take in order to make the bathroom door repairs? You're in luck then! Take a look at this quick video & see if your bathroom, or bedroom door is damaged in this way that "joe" shows. If it is, then "joe" is preparing an entire instructional video series that shows how to repair a damaged bathroom/bedroom door, for your enjoyment, entertainment, & education. Hey even if your door is not damaged in this way, I'm sure there's something that "joe" will say or show you how to do, that you could use for future use. This is Part 3 (of many) that "joe" will show re: how to repair a damaged bathroom door. Hey if "joe" can repair a damaged bathroom door, you can too! http://www.VideoJoeKnows.com
Before I pack that with liquid nail,
I want to make sure that my clamps are big enough.
And here's my clamp.
I think this is big enough for this.
I'm just, you know, it's always good
just to kind of check things out
before you get going with your project
and then find out something's not gonna work
like how you planned it, you know?
Wow.
Usually I only use this for like 3 1⁄4 material,
3 1⁄4 inch.
This is an inch, almost an inch and a half now.
Wow.
Okay.
I guess it's gonna work.
I've got four clamps,
so I've gotta figure strategically
where I want these located
to see if I have enough clamps.
And I think I'm gonna have enough.
See, I think if I put one down right down in there,
that'll do.
Oh, man.
Yeah, I think that's gonna do.
Now see, I might have to put one up a little bit more.
Get three clamps down there, huh?
I brought four clamps.
I could've brought,
maybe I should've brought even more.
Ah!
Guess that one will go there.
And then I could move this one over just a hair like that.
I think that's gonna work.
Once I get everything mastic'd in there,
do you see?
I'm gonna put those clamps on there like that,
and I'll just let it sit like that
for quite a few hours to get everything dry.
All right?
Looks good.
There's my mock test.
Now I'm ready to get going.
That also tells me I'm gonna have to glue this side
and I'm gonna have to glue this side.
You know, do everything before I start putting any clamps
because if I get the bottom and try to clamp that,
then I'm gonna have a hard time up higher.
So I wanna get this all the way back.
And filling up this,
I'll have to do that after this all dries.
Then I can put some more mastic on there at the end, okay?
This little repair is gonna be like a two-step process
because of the drying time that's gonna be involved,
but it's gonna be worth it.
I forgot to tell you one more important thing
we're gonna do with this.
Got some masking tape here,
and I wanna put masking tape over the edge
because I don't wanna have any of this spooge out,
especially this top edge here.
This is the side of the door.
I don't really wanna get any mastic on there
if I can help it.
If I get a little bit on there,
it's really not gonna hurt too much,
but because I've got the masking tape,
I'm not gonna have that problem, am I?
Here's another tip for you.
I've got, this masking tape roll is pretty old
and there's hardly any tape left on here.
When I peel it back, it's pretty sticky.
It's more sticky than normal.
And I always try to make sure
I've got extra masking tape around.
So I'm gonna use a little bit of the new masking tape
as opposed to the old
because what's gonna happen possibly
is this is so sticky,
I don't want it to peel off any of the paint
on the face of the doors or the side edge of the door.
Now, granted, this door's over five years old,
but this masking tape is so sticky
and because I'm gonna have to leave the clamps on here
probably overnight,
it's gonna be kind of on the masking tape
and I don't want that to dig in
and to affect my paint job.
This top bit, I wanna cover that with my masking tape.
My masking tape is wider than that,
so what to do with that?
You know, I'm just gonna take enough.
I'm gonna put it right over the entire area.
Guess I'll start, yeah, about there.
Okay, now I can take my sheetrock knife
and I can cut it back to how far I'm gonna fold it,
how far I'm gonna get the liquid nail back in there
for the sides that are loose.
Okay, so now I can peel that back like that
and the rest of the masking tape,
I could fold over the edge if I want
or I could cut it off, whatever,
but see, that crack's not going any further than that.
Now, that's gonna protect my front edge, isn't it?
Guess I could just fold that down like that.
There, perfect.
Here's something to realize on masking tape.
I'm only gonna have this masking tape on this door
for less than a day,
so that's why I'm using standard masking tape.
Now, if I was gonna leave that on there
for three or four days,
then you've gotta use the blue masking tape
and you know what?
They even have green now, too,
kinda like the blue,
so if you ever got any questions about that,
look for it at the hardware store
and read all about it.
Just got a little mastic on there.
I'm just gonna put it on in there.
I'm gonna do that a couple times
because then that keeps pushing the mastic
down there further, you know?
Now, some of it, obviously, is gonna come out
when I squeeze that together with the clamps.
That's all right.
I've prepared myself for that
and I wanna get all that in there.
I'm glad I got the masking tape on the edge
because once I get to this point,
I don't wanna go back and forth
trying to keep it clean and everything.
The thing with liquid nail
is when you get it on a surface that you don't want,
it's best just to leave it alone until it dries
and then you can cut it off.
If it's got an edge on it,
you can cut it off with the sheetrock knife.
You wipe it off,
then it gets all in the pores
of whatever you're working with.
You're never gonna be able to clean it off, per se,
you know, because it gets all over.
But once you let it dry,
then it's like hard as a rock
and then you can just get it off.
Now, see, I've got masking tape on the top here
so when I peel that masking tape off,
it's not gonna get on the pores of the paint
and I won't be able to clean that off later
without affecting the paint, you know?
So I've just got a little staging area for my caulking
and I've got it pushed down
and I just grab a little bit with my cutting knife
and work it in there.
Now I've gotta take that out.
See how it's spooging already?
It's all right.
Get my little screwdriver in there.
Try to get, try to pack in a little bit more
around that as best I can.
Oh, and this liquid nail dries.
Look out.
The other thing about liquid nail
is it's kind of smelly to a certain extent, you know?
But it's not gonna hurt you.
Open your windows or something.
I wouldn't run an air conditioner
because then you're gonna get into
possibly blowing the fumes into other rooms.
No, you can keep your door propped open,
your outside door, whatever.
I mean, it's not, it's not that bad, okay?
That side looks good.
Man, some of that's gonna get on my clamps too, huh?
I'll be able to work with it, okay?
Now for this side.
I'm already starting to think
how I can keep this mastic,
any overage off of my clamps.
You know, I probably could put another piece
of masking tape over that before I clamp it.
What about that?
Then it won't get on my end pieces.
If it gets on the end piece, you know,
is it the end of the world now?
I can pull these end pieces off.
That's what I like about these.
And then, you know, clean it off of this.
Or I could do it without that and just leave the metal.
But then the metal could leave an indentation in the wood.
So I'll just push that back on.
I'll use it that way, I'm sure.
Do you have a question about anything
on how to around your house
that you need Joe to help you with?
Hey, send me a line and I'll get back to you.
I wanna help you with your projects.