Carpenter Crafts a Natural Honey-Toned Wood Ceiling | Season 7 Part 4

Inside Home
23 followers
31 Video Views·Oct 5, 2026
Hello! I’m Shoyan.
I have been working as a carpenter in Japan for 50 years and am a licensed architect and technician.
I would like to share my work, knowledge, etc., regarding Japanese carpentry.
I hope you enjoy my videos!
AI Generated·May contain errors
Hello, Shoyan here. The insulation and the air sealing are finished, so I start working from
the ceiling. I'm putting up a Funazoko ceiling with both sides sloped. This ceiling is on the
second floor. Both sides are sloped, so we've always called it a Funazoko, a ship's bottom
ceiling. That's what I'm working on. In the last video, you saw the insulation work.
They packed 300 millimeters of cellulose in the ceiling and 120 millimeters in the walls instead
of spraying it. I didn't put the ceiling frame up right after that. I covered it with an airtight
membrane myself, taped the seams, and did the air sealing. So the usual air sealing came after the
cellulose work. Now I move on to the ceiling frame. For the walls, the outer side is furred out 15
millimeters, so there's a 15 millimeter space behind the surface. I'll nail furring strips to
that later, which leaves room for the wiring and the electrical boxes. For the ceiling though,
I run 40 millimeter square Nobuchi across the backing I put up during the cellulose insulation
work. I set it at 300 millimeter intervals, then put up 12 millimeter cedar planks running up the
slope. Last time, I put up the insulation frame carefully because it ends up carrying the Nobuchi
and the finished ceiling on top of that. That's what I meant by doing it carefully. Still, it did
need a fair bit of fine adjustment. There's a 300 millimeter beam in there. Nailing underneath that,
honestly, I couldn't get it dead straight. But being off by one or two millimeters doesn't
cause any trouble at all. Even if I built it from scratch, that much error is bound to happen.
The cedar planks for the ceiling come shrink-wrapped and the package looks clean.
But looking closely, I saw that half were Muji, the top grade with no knots, and half were Joko,
the next grade down. When I asked, they told me it's Muji Joko, which just means the two are
mixed together. Apparently, they came up with this Muji Joko grade just recently. It was written
on other packages too. I've never heard of Muji Joko in all my years. With rice, you've always
had grade one and grade two. There's never been a grade one and a half. If you point out there's a
knot, they just say it's Muji Joko and the Joko half lets them off the hook. So even the way they
name a grade has shifted to suit themselves. I can't say it sits right with me.
The ceiling is narrow, solid cedar planks. But sad to say, the colors are all over the place.
There are all kinds of ways to install them. Some match the colors, some alternate dark and light.
This time, I'm not deciding where each one goes. The order won't come out alternating dark and
light, but I want to mix them so the colors don't bunch up in one spot. Actually, mixing the colors
is the hardest way of all. Whether I match them or do anything else, I have to sort the whole lot
into about three groups by dark and light. If I just put them up in the order I picked them up,
the same colors always bunch together somewhere. So I split them into about three sets, dark,
light and light dark in some ratio. In the end, I just have to lay them out by feel. Once it's up,
I always think, ah, maybe that way would have been better. It never goes how I pictured it.
Something always nags at me. This color business really is tricky. I put the ceiling boards up with
wood glue and four millimeter staples. Right now, it's ridiculously hot. With this heat,
even wood glue sets pretty fast and other glues are faster than that. Wood glue is water-based,
so I can clean it up if things get messy. That's why I think wood glue is the way to go for a
ceiling like this.
Lately, my compressor turns into a festival when I run it on low pressure. It whistles like a
festival flute. The valve must be going bad. Everything's getting old on me. These boards
are four meters long, so working the tongue into the groove is a real job. But the boards sit better
on a slope than they do flat. That way, they're not hard to put up, but two or three meters would
still be the easiest length to work with. For a funazoko ceiling, a bit more slope looks better.
On the slope I'm putting up now, I brought the dark end down low. A tree is lighter up high
and darker down low, and the boards retain that appearance, so the dark end normally goes at the
bottom. I do the same on the other slope with the light end up high. But the darker part isn't always
on the same edge of the board, sometimes right, sometimes left. It never quite goes the way I want,
and that's the fun of solid wood. I like that about it.
That's the funazoko ceiling, done in solid cedar, sloped on both sides. Solid wood really is nice.
Even when the colors don't quite match, there's a charm in that. That's all for today, thanks for watching!
