http://www.VideoJoeKnows.com How to repair a damaged bathroom door....Part 2 Is your bathroom (or bedroom door) damaged & you're not sure if there's anyway to make the needed repairs?....or you're not sure how & what steps to take in order to make the bathroom door repairs? You're in luck then! Take a look at this quick video & see if your bathroom, or bedroom door is damaged in this way that "joe" shows. If it is, then "joe" is preparing an entire instructional video series that shows how to repair a damaged bathroom/bedroom door, for your enjoyment, entertainment, & education. Hey even if your door is not damaged in this way, I'm sure there's something that "joe" will say or show you how to do, that you could use for future use. This is Part 2 (of many) that "joe" will show re: how to repair a damaged bathroom door. Hey if "joe" can repair a damaged bathroom door, so can you! http://www.VideoJoeKnows.com
Now how am I going to do that? How am I going to make these repairs? Well,
first thing you got to know is you got to take the door off the hinge pins and that's what I'm
going to do. I'm going to pop this door off the hinges. I'm going to put it in the other room.
That way I can stand this door up on edge, you know sideways, and then I'll be able to work on
it. I don't really want to work on it here down by the floor. I'll get a better product if I can
get it out of here. I won't make as much of a mess. I probably could do it in place, but
you know I want to kind of separate this a little bit and make sure I get the mastic in there on the
side, on the edge of the door, as well as underneath on the bottom. I couldn't very
well get it up underneath there and I don't want to make a big huge mess, so I'm going to do it
the right way. I'm going to pop this door off. I'm going to take it into the other room and we're
going to get to work. Do you remember how to pop a door off the hinges? You're going to start at
the bottom, pop the bottom one off, take the next hinge pin out, and do the top one last. I've got
a whole video that shows you how to do that. If you're interested and want to see that, the entire
length of that little video, it's not very long, look for it on my channel. I've got this door
propped up. Let's take a closer look. I'm going to look at that and see how I'm going to put that in there
and I've got to check this and see how loose it is on how far back to see if I can't wedge enough
liquid nail in there. Man, that separated something fierce. See what I meant by all those layers on there?
All kinds of layers on that, but the first thing I got to do is I got to figure out
where I'm going to put the liquid nail. It's a mastic and I'm going to end up putting it in
there with my putty knife and just packing it in there. I don't want to get it all over the place,
but before I do that, I'm just kind of probing along here, formalizing a game plan
and see this side. It's not too bad, but I need to get some some mastic in there too.
See how far back I need to do it so far I can put my my putty knife in there. I don't want to
I don't want to bend on it too much and see the thickness of that. That's about, oh, less than an
eighth of an inch. This side over here is supposed to be like that side. What happens when you get
moisture in there? It just grows like a sponge. See this here? That's over a quarter inch. That
could be almost three-eighths of an inch from outside to outside right there and it should only
be about an eighth. Let's see, they have a wood on the side here and then they've just skinned
the whole front of the door with this hardboard. This is called hardboard
and when it doesn't get any moisture in it, it stays nice and tight for a long time. Once you
hit moisture, boom! This is what happens. So most of your doors, you know, if you have hardboard
covered doors like this on the exterior of your house, those are likely to give as well as in your
bathrooms or maybe a utility room, something like that. Your bedroom doors, they should be fine.
But hey, there's nothing stopping you from checking your doors. If you think you've got
doors like this, check them out. If any of them are like this at the bottom, you might
want to get them fixed. Before I get all gung-ho thinking I'm just going to squirt some mastic in
there and spooge it all around and be done with it, I'm just going to think about this a little
bit longer. Like I said, I want to get the glue in there as far as I can, so
just trying to check out some different ideas. See, I could put my screwdriver in there like that.
See, I could pack that full, but I want to get it down this way. So I'm probably going to start down
here first, so I could probably put my screwdriver maybe about there, you know. Then I can pack that
and then I can move my screwdriver up. I can have two screwdrivers, you know. Get both
screwdrivers in there like that, pack that, and then take this screwdriver out, pack that,
start in the back, move out to the front, and do this little outside portion last.
It'll be kind of tricky. I'm probably going to get some mastic all over the screwdrivers and stuff,
but you know, you got to do what you got to do. Now, same thing here. I'll probably end up starting
at the bottom, putting my screwdriver in there. I don't want to push too hard because I can
peel all this hardboard all the way off if I just start peeling it back, but I don't want to do that,
you know. I think I'm going to start right in there and then work my way up,
and then I think I'm going to try to peel some of this back just right here on the tip,
you know, and put a little bit of liquid nail in there and a little bit more and a little bit more
and a little bit more, and then I can clamp it, and that's going to kind of push that back
together. I might have to put a little skin of it on there too, you know what I mean, or something.
I'll probably clamp it and let it dry, and then I may have to take a rasp to it, make it a little
bit cleaner, and it's a good thing I got some paint touch up. I got some paint touch up exactly
the same color, so that's good for this edge. See, this is the bottom of the door, so I don't care
too much about that. If I get a little bit of liquid nails on there, that's probably fine. In
fact, I might even want to do that. See, here's a crack right across this wood. I could kind of
fill some of that in and put some right in there where that notch is. That was a notch for the
bottom rail and the side rail, and I could fill that in and maybe just skin over the top of this
because this is all pores of the wood because this is a cross cut. It's not a rip.
See, down here you don't see that because the wood is going the opposite direction. This is the end
cut, so I kind of fill in there too. That might help a little bit, you know. At least it'll keep it
from cracking, and see, once that cracked like that, this hardboard didn't hold it, did it, and this
cracked up maybe ever so slight, and that could have helped loosen up this. All right, I think
this liquid nail, Heavy Duty Liquid Nails, is going to work out good. Here's what I'm going to use.
This is Mastic. It's called Liquid Nails Heavy Duty. This is the blue label I call it. Now, if you
know anything about Joe, I usually have used Liquid Nails, the red label, in the past, and the red
label was the original Liquid Nails, and that's been out for years, ever since I was a kid and
probably further than that, but that's when I started learning about Liquid Nails, and we use
that for all kinds of stuff on the construction job sites and everything. Now they've come out
with the Heavy Duty Liquid Nail, and the only thing I can really see that's any different than the red
label is this says interior and exterior Liquid Nails Heavy Duty, whereas the red label only said
interior, and like I say, this is kind of, my repair is kind of mimicking exterior conditions because I'm
in a shower alcove area, and the door's extending over the edge just a little bit, right, and so that's
why I want to use this rather than the red label. The red label would probably work, but you know
what? I think I should just start getting in the habit of using the extra or the Heavy Duty Liquid
Nail just to be on the safe side. It didn't cost that much more than the red label. It's only maybe
50 cents more. This is less than four dollars at any hardware store, and just get in the habit.
Whenever you need Mastic for anything, make sure you read the label, of course. There's all kinds of
directions on the side, what it's good for, what it's not good for, but you know, for this project
right here, this is the stuff you gotta use. As with most Mastics, when you cut the end of this off,
too, there's probably going to be a label inside it, you know, that holds the Mastic from coming
out. You got to penetrate that. Just make sure you always do that. You want to penetrate that,
and then you're sure that the Liquid Nails is going to come out. It's not going to spooge out
of the back side and get all in your nail gun or your caulking gun and that kind of stuff.
As with most Mastics, it's going to have a seal inside of here, so when you cut the end,
you want to make sure you penetrate that, and on my caulking gun, it's got this little
end piece, and I'm going to use that for it, and that works out really good for that.
You want to do that because you don't want anything spooging out the back side of your
caulk tube, all right? So, make sure you check for that. Usually, there's a seal in there
for Mastics and that kind of stuff. You know, not all caulking tubes have that, like Painter's Caulk
that used to have that, but nowadays, that, you can just squirt it out of the tube,
most of them anyway. So, you know, you just kind of want to check and make sure you're careful
to see if it has a seal or not.