How to Repair Paint Grade Door Bottom Edge Part...15

VideoJoeShows
86 followers
2 Video Views·Apr 20, 2026
https://www.youtube.com/user/VideoJoeShows
How to repair a paint grade door bottom edge...Part 15 is what this howto video is about. Wow. VideoJoe isn't done with his project of repairing that silly door bottom edge to a paint grade door yet? No! Almost but not quite there yet. Watch & learn as VideoJoeShows you the next step in his project of repairing a door bottom edge to a paint grade door...Part 15
https://www.youtube.com/user/VideoJoeShows
Just going to put a little liquid nail just over that surface before I do the painting,
because I did the other liquid nails on the other side. And I'm just putting a light skin,
just over that rough edge, or that exposed edge, because that was the hardboard, remember?
That's just going to help before I do the painting. A little extra right there,
I may have to clean that off. I could have put masking tape on there, but
you know, there was such a little bit of mount there. I thought I would see what happened.
I just did it freehand. That's good. I do the touch-up paint. The touch-up paint is
going to roll beyond that edge, okay? Beauty. I went and scraped all that off with my sheet
rock knife, you know, all the way around, on the sides too, and the end.
And once I did that, since I had my little emery cloth, I just sanded that a little bit,
because this, the sheet rock knife, might put in any little slight gouges, hardly anything.
But you're using a putty knife, you know, for spackling or whatever. The last thing you want
is to hit an edge. You want this nice and tight, tight edge, you know, with no little grooves in
it or little gouges. And so since I had the emery cloth here, I just thought I'd clean this up a
little bit, okay? Oh, beauty. That's all ready for my next little project, whatever it is.
I got quite the mess going on here. And see, there's my little staging area for my
liquid nails. Now I can just fold that together like that, and I can throw that away,
okay? Just, you know, something quick and easy to think about. Last thing you want is for this to
all over the place. You don't want anybody to step in that. If you don't have a garbage can,
just make sure you do something to it so that it's not going to get all over.
Now see, this is how I'm going to leave my caulking. You know, I spooched some of this out,
and I just kind of formed a mound on here, and it's going to have a tendency to slide down.
But just get your finger wet, and then you can kind of rearrange this.
If you use a dry finger, it sticks all over on you. And you try to dry that off,
and pretty soon it gets all over. I got some on myself from the project.
You do it right, you'll be ready for your next project.
