How to Apply Skim Coat over Quickset Drywall Patch

VideoJoeShows
86 followers
19 Video Views·Apr 18, 2026
https://www.youtube.com/user/VideoJoeShows
How to apply a skim coat over a quickset drywall patch is what this howto video is about. Applying a skim coat is easy....when you know how. Do you use quickset for the skim coat? No. Quickset is generally used for the first & 2nd coats to a drywall patch then you would finish up the patch with all purpose joint compound mud. Seems like alot of work for a sheetrock patch. Not if you want the patch to be done right. Watch & learn as VideoJoeShows you how to apply a skim coat over a quickset drywall patch..
https://www.youtube.com/user/VideoJoeShows
Got this all scraped down. This is the Kwik Set and I'm going to put
all-purpose joint compound on here. This is all dry and I'm going to put a little bit of
joint compound on here now. And if you have your pass fairly smooth with a second coat
of Kwik Set, then it's easier to put this on there, you know. I think what I'm going to do,
I've got a four-inch knife here. It's a broad knife. I'm going to change over to my six-inch
knife just so that I can kind of bridge over the whole patch area. I'm going to go just beyond it
at the top and the sides because I want that patch to disappear. I'm going to play with it
a little bit. Put on enough so that I've still got a little bit of mud over the top of it
so that I can sand it. See that line there? I've got just something inside the mud.
You know, just a little piece of grit causes that. Look at that. A little whoops in there.
So I'll have to grab some extra mud and try that again. Okay, I think that's good. I'll let that
dry. I'm going to let that dry all the way and then I'm going to lightly sand that and see if
I need to put some tight-skim material on there. I see one other little spot right down in here.
Just have to kind of do that. I don't have to get it perfect,
but I'm going to get it close enough so that when I sand that, if I have to do anything,
I'll put just a little bit of tight-skimming material over there. The same thing. I'm just
calling it a tight-skim because that's what you do after this, okay? Because I want this to blend
in really good to my existing. The whole idea here is to not see a patch at all, and I think
I'm achieving that. Here's something important I want to talk about. Now that I got this coat on
here, the coat of all-purpose mud over the Kwikset, you've got to let this dry all the way.
I want all of that moisture out of here before you take a sanding pad to here and sand this area,
okay? Even if it's slightly questionable, don't hit the sander on here, a sanding pole or a
paddle sander, whatever you're going to use to sand that. Wait until this is 100% dry because
if you don't, and you might think, oh, the top surface looks okay. I'll just kind of brush it
down with sandpaper. That sandpaper will eat right onto the area where it's going to be wet,
and you're going to drag stuff all over the place. Now you're going to have to do another coat
of mud. You know, if that happens to you, hey, it's not the end of the world.
You'll have to put some more mud on there and go over it again, but I'm just letting you know,
it's much better to just wait for it all to turn the same color as the surrounding patch area,
okay? You'll know when it's dry, trust me. Then you can lightly sand that down,
take a quick look at it, and if you need to, you're going to put a tight skim over that
and blend it in. You tight skim it. You're going to do this area, and you may want to extend it
out just a little bit further. The idea here is we don't want to have any sort of bump here,
and I think we did a good job here. This looks nice long here. Can't even see that patch there,
can you? We're not done, but when we are, it'll look great.
