How to Repair Drywall: Installing a 2nd Coat of Quickset

VideoJoeKnows
63 followers
1 Video View·Jun 6, 2026
http://www.VideoJoeKnows.com Learn how to install a 2nd coat of "quickset" joint compound to a drywall repair area. You don't have to be a pro to repair drywall. Watch as "joe" installs a 2nd coat of quickset joint compound to a small drywall repair. Hey.....if "joe" can repair drywall......"you" can repair drywall. Watch, listen, & learn.
http://www.VideoJoeKnows.com
AI Generated·May contain errors
Okay, we're ready to put some more mud on here
What I'm going to do is I've already wiped it down, but now that it's pretty much dry
I'm just going to kind of clean it up a little bit
You like that if some of it doesn't come off don't you might have to scrape if you leave it on there too long
But I haven't left it on there that long
I'm just going to wipe down a little bit more
Doesn't hurt to do this a few times
It gets off all the little rough edges
So that I'm ready for the next coat
Okay, so
now I'm going to put some more mud on there and
It's going to start. It's going to start getting a little bit smoother
Obviously because I'm filling up all the all the joints now
There are all the little imperfections from the first coat
I'm still trying to keep it flat
But I want to put enough on there to cover up the mud all the way
Wiping down my angles as I go so it doesn't want to
go all over
It starts coming if the mud starts getting off your your knife
You can stop and then you can wipe some of it off your pan
And that kind of thing okay, so I'm still using my three-inch knife
Now professionals they would probably do something different than this but
Again, I am showing you
how you can do it yourself you are not going to be a professional, and I'm certainly not a
Professional sheetrock taper as well, but when I get done
My patches look really good
That's because I spend extra time on it
And I don't try to rush it
so
I'm just going to work my way around the patch putting on a little bit, and then I'm going to
Wipe it as I go
I'm going to use a wider knife
Sheetrock not a pan knife on my next coat this one. I'm just
Sprucing it up if that's such a word spruce it up. That's a word
Okay, so it's getting a little bit smoother now
work
kind of
Kind of fast not too fast oops almost got me
Notice you got to watch out for that
Okay, so I just keep going around the patch
You get used to some of your
Ways you hold it you're backhanding it up there or forward whatever so you've got different angles
Once you start working with patching stuff like you decide you want to do another patch after this you'll get better
It's just the way
Not having to readjust your ladder
Okay
All right there
Always kind of want to go the same angle the same direction as your patch, so you're getting it on there at the angle
like that
Brush
If you get a ridge you can wipe the ridge down when it dries a little bit
Make sure you keep track of the
Tape make sure you want to cover it this time all the way you'll see that you'll see the tape
Peeking out from the first coat
But you don't want to put it on so thick that it's going to cause a bulge on our next coat that we put over this
Okay
so
There you have it now. We're going to do the same thing on the other two patches
And I'll get back to you on the next step
Okay at this point
Before we install the next coat
I'm just going to take my three-inch knife again
I'm gently going to go around the edges and make sure that there's no ridges. I want to get those ridges off
Specifically on the outside edge because we want to blend it into the outside edge if we get any ridges
And we don't knock those off
What happens is when we put the next coat on there's going to be that much more?
Mud on there, and then you may have a chance of seeing the patch so ultimately we don't want to do that
So this is a quick set material
It's plenty dry now to work with
So I'm just taking my putty knife and wiping as you can see some some
Dust is falling and different things kind of flattens out anything left
Because if you do it if you do it too early you still want to double check it when you get done
Before you put on the next coat
so
We're just going around the edges
and then
Checking this too, and it looks like we're all ready for the next coat so on all of your patches
Make sure you do this before you put your next coat on
Because you can remember I used my three-inch
Knife to put the tape on and also to put the first coat of mud on now
I could have used a four-inch knife
This wide and I could have done that I like I got a little bit better control with the three-inch knife
So I'm going to I'm not going to use the four inch
You can try the four inch if you'd like
But on this next coat what I'm going to do is I'm going to use a six inch blade you can see when I put
That when I put the mud on I'm going to I'm going to bridge this area from here to there
I'm going to go over further over so when I get done. I'm going to have a nice
Full coat on this next time. I don't like to do that too soon
I do small enough coats so that so that when I when I do this
When I get done with the first coat usually I'm okay to put the next one on and and I like to put a lot
Of little coats on here because I can't control too much at one time
So I'm just telling you kind of what I do and you can take that and when you try your patches try this technique
I think it'll really help you out
