How to Repair Drywall: Installing a Skim Coat over a Drywall Patch

VideoJoeKnows
63 followers
Jun 6, 2026
http://www.VideoJoeKnows.com Installing a skim coat over a drywall patch is an important step when making a drywall repair. Do "not" use quickset material to install a skim coat layer over a drywall patch or you'll be sorry. Use "this type" of skim coat material for your drywall patches. Hey....if "joe" can install a skim coat over a drywall patch.....then "you" can install a skim coat over a drywall patch. Watch & learn.
http://www.VideoJoeKnows.com
AI Generated·May contain errors
Okay, we're ready for the lightweight all-purpose joint compound. This is for our top coat.
Opening that up and I'm going to put something in my bag. Now this this stuff is moist so
again I just use my three inch knife and kind of dig it out of the plastic.
If you're not using that much it's not like you have to put this in a bucket or anything.
They do carry this in bucket form too but I like the box and I save it for next patch and then
when you want you can throw the rest away. It doesn't really cost very much.
Now this I can put more in my pan because it's not going to dry out on me. This is already pre-mixed
up. It comes that way. Okay, so I've got about that much so that's about all I'm going to use.
I'm going to put just a little bit of water in there, just a little, not very much. This is
pretty thick, nice and texturized. I don't want to get it too runny so I'm just going to put
just a hair, just a trickle. I'm going to mix that up and then I'll see you in the other room.
We'll put it up. I figured I'd show you how I'm mixing this up. I just poured just a drip
of water in here and I'm just taking my knife. I use the three inch knife because it's nice to
work with in the pan. Six inch knife is kind of too big for me so you just kind of do circular
eight motions. Get the water all mixed up in there. Not like we need special tools to mix
it because we're only doing a patch. So, you know, back and forth like this. Nice consistency.
I clean off my knife. Okay, now I'm all set to go. So that's how you get to do that. Okay,
this is about how much mud you want on the blade. This is a 10 inch knife because what we're going
to do is we're going to coat the entire ceiling patch area. So I'm going to show you a couple
different knives that you can use. Now, I'm holding my hand, my finger about right there.
If you want to put more pressure on the right side, when you're on the outside edge, you can
put your finger there, you can put your finger here. Most of the time you're going to want your
finger right in there. Okay, so I'm just going to put that on. You notice how I don't have much
mud on the right hand end or the left hand end because I don't want it falling down on my face.
I'm just going to coat the whole thing. This is regular mud. So you just want to get a little bit
on your knife, kind of like that. Now I'm coating the entire patch area. See how I'm doing that?
At the end, on the outside edge, I want to put more pressure and then I want to let off just
a little bit. It's kind of like a feel. I want to keep the outside edge nice and tight because when
I get done, I don't want to see this edge here at all. If I only start from this edge in,
there's going to be a bump here. So everything's going to be smooth. Then when I paint it, you're
going to see exactly where the patch is. So what I have to do is I not only have to go to here,
I have to bridge this over a little bit with the mud. Okay, so just little bits at a time.
I'm putting that on. Now I do the entire patch that way. I might want to use my small blade
like right in here. Obviously, I can't get the big blade. So I'm going to use my small knife
because I got to fill in this just a little bit because I'm going to be tapering this edge out.
So I can use my smaller blade over here. Okay, so you're just going to have to
kind of play with that and float it in like that around. Add a little bit more mud right in there.
Then you can use your big blade around the rest. I can fill in around the box. This box,
by the way, is for a ceiling fan, but in case you're wondering. Okay, so I do that and work
that around. Then I use my big knife all the way around there. So I'm going to show you another
knife here in a moment. Okay, believe it or not, I am going to use this up here to show
you another technique. This is 11 inch. It's kind of like a concrete trowel. Now they make
these for sheetrock. I'm not sure. I think I even bought this and it was a concrete trowel.
I'm going to use this because sometimes your fingers get sore after a while. This is more
wrist action. I'm going to show you how I do that. I'm going to load it up on the tip
kind of like that, and I'm going to put that up there. I'm going to get a little bit more
and now I'm going to trowel that on there. That's how I like to really do lots of my patches
with this particular trowel. Each time I put some on, I knock it off and then add some
so it doesn't want to fall down on me. Then I can use what's left on here. Put a little bit,
little bit, and then I can trowel it off. I like using this thing. Lots of sheetrockers don't use
this, but it gives me more control. I found now if you want to use the 10 inch knife that I showed
you before, that's an option as well. So there's not, you know, you can use a 12 inch knife too.
Instead of the 10 inch, they have a 12 inch you can utilize. So this, I can kind of go lots of
angles and it gives me a nice smooth surface. That's kind of how you can do that. I'm going
to finish this and I'll be back with you to show you what the patch looks like when I'm done.
