Why Has Your Wall Cracked? and What Can You Do?

Repair house
9 followers
Hello, I'm Roger Bisbee from the Skill Builder channel.
I wanna talk to you in this whiteboard presentation
about cracking up, cracks in buildings.
Let's have a look at that.
A lot of people get very alarmed about cracks in buildings.
They go, oh, my house is falling down.
Houses rarely fall down.
Generally, the odd crack in a building
is not gonna make it fall.
One of the reasons for that is we've got something
that was invented 7,000 years ago,
which we still use to this day, and that is brickwork.
Brickwork bonded so that if there is a crack,
the load is spread across.
Now, what you very often find in old brickwork
is you might find a crack in the brickwork,
which is going down the mortar course,
along there, down there, along there,
down there, and along there.
Very, very common, that kind of thing.
That's one of the beauties of brickwork
is it is kind of accommodating.
And if you don't make the mortar too strong,
put a bit of lime in it, five sand, one cement,
then if there is any movement in a building,
and let's face it, all buildings move at some time.
If there is any movement, it's taken care of
by this natural give in the brickwork structure,
which is a fantastic thing.
If that happens, if you've got an old building,
if it's built 100 years ago,
as much of the London property was,
it's got sand and lime buildings,
the worst thing you can do is go poking sand and cement in.
There are a nice, strong mix of sand and cement in there,
thinking that you're gonna be sealing that crack up.
Another thing that's not very good to do
is put an epoxy resin in there
so that you end up sealing that crack up.
And there are lots of masonry repair kits around
which use precisely that idea.
They use this resin to try and tie the thing together.
All well and good, I've used those myself.
You need to know why that building's cracking up
in the first place, and whether it's actually a problem.
Because if it's not a problem,
there's no point really in putting a straitjacket on it.
If you put a straitjacket on that,
if you put a nice, strong resin all the way down that crack,
what you find very often is that the brickwork
will just crack next to it.
And I've seen that time and time again,
where there is a crack next to the crack, if you like.
The first thing you need to do
is find out why that crack is occurring.
The whole of London is built on clay,
probably one of the worst conditions that you can build on.
The problem is with it,
expands and it contracts according to the moisture.
So if you get a very wet winter
and that clay gets saturated with water,
you're gonna get what they call heave,
which is the expansion in the clay,
and it's pushing up and it's pushing on the walls,
pushing on the floors,
and it creates a tremendous amount of force.
In the summer, when it dries out,
if you get a very hot summer,
and then you've got several weeks or months even
without rain, then all that clay will crack up
and you'll see all these fissures across the ground.
You know, sometimes it looks like earthquake.
And of course, what that does is it means
that the foundations that are sitting on that clay
are suddenly not supported evenly
and they will start to crack up.
To a certain extent,
this has been going on all these years
and it's no big deal.
They heave in the winter, they shrink in the summer.
The buildings, to some extent, as I say,
if they're built with sand and lime,
they will tolerate a little bit of movement in that way.
In that case, the worst thing you can possibly do
is go putting a strong mix of sand and cement
or resin into that crack,
because if you do, the ground has shrunk away,
the crack has opened up,
you fill it up with something really tough,
like a three to one mix of sand and cement,
and then the winter comes and the heave occurs
and what you get is that crack that you had before.
The brickwork is trying to go back
to where it originally was,
but it can't because you filled it up.
So it's gonna start pushing the building out.
And this is what we call ratcheting.
This is a process by which that crack gets wider and wider
because you filled it up.
The next year you go back, you go,
oh, it's opened up again, it's got wider
and it carries on getting wider.
And all the time you think, oh my goodness,
my building's falling down, I need to get it underpinned.
And if you just left it alone in the first place,
it would have been fine.
So if you're gonna fill up a crack,
and I understand why you would want to fill up a crack,
fill up the crack with the same material
that the wall was built from.
So if it's a sand and lime construction,
get yourself a bit of hydraulic lime,
mix it with some sand and fill that crack up with the sand.
If you've got other situations,
if you've got a building which isn't suffering from heave,
if it's not built on clay,
say it's built on sand as mine are,
something like a drain leaks under the foundations
and washes the ground away.
The ground starts washing away
and you find that you've got a crack in the foundations,
then you get a crack.
Then that is something that you can do
with the crack repair kit,
where you basically chase out the mortar courses.
You put in the helical ties,
which are stainless steel twisted bits of bar,
which go across the crack.
So you chase out the mortar all the way across here,
maybe a metre.
And then you push in the helical bar across there,
and then you put back a resin.
And then on the top,
you put back sand and cement so that nobody can see it.
And if you get a good guy to do the crack repair,
they match the colour of the mortar
and you'd never know that it happened.
So if you've got a crack in the brick,
they probably replace the bricks
and they put in the helical bars to stitch the crack back.
That's called crack stitching.
Very effective way of dealing with it.
And I have actually seen buildings
up in Suffolk where they've actually run this helical bar
all the way around the building on several courses,
just to hold the building together
because the whole thing is starting to fall apart.
So you can do an awful lot in remedial ways.
The other thing that you used to see
on the outside of buildings,
the old wall ties,
piece of metal that they got to bolt
through the middle of them.
If you've got a building like that
and you've got the walls starting to belly out,
they're starting to drift apart on one end or the other,
what they do is they put a rod all the way through,
maybe a floor level,
going all the way through the joists.
And then they put the wall ties on there
and then they start doing those nuts up
and you can even start to pull the building
back into shape.
But if you don't,
at least you stop it from going any further.
Now that's now done with invisible wall ties
so that you don't see it
because a lot of people worry
about seeing external wall ties.
I bought a house that had external wall ties on it
and I thought that's fine,
there's nothing wrong with it.
The mortgage company didn't mind it
because basically the problem had been solved.
Whatever was happening in that building
had now been constrained.
But another thing that we do now,
we put in some kind of restraints on the wall.
We would put in straps on the wall going down the roof
and we would put straps in where we've got floor joists
going through the building like this.
We would put a strap in across the floor joists
that went into the wall to hold the walls together.
One of the problems that we've got these days
is that people want to take all the internal walls
out of their house
because they had this lovely old house
that was a few hundred years old.
The rooms were all small in those days.
They didn't want to heat huge spaces
but now because we've got central heating
and we want light and air in our buildings
and they might take the back end of the house away.
Great bi-fold doors take all the internal walls away.
You're suddenly left with these great big long flank walls.
There's nothing restraining them.
You might've had some chimney breasts
going through there at one point.
What you've done is you've taken all the chimney breast away
and you've left that wall unstable.
Very important that when you take anything away
in a building, this is a golden rule,
you put back more than you took away.
In other words, you've taken away structural restraint
for the chimney breast,
put back more structural restraint than you took away.
That way you can't go wrong.
The other thing we find
is when people put loft conversions on,
suddenly they're putting an extra load onto that wall.
And very often when I've done loft conversions,
they've asked for us to do a little foundation dig
where we dig a few holes around the foundation
so that the surveyor can come along
and see just how far the foundations go down.
And a lot of the time in old buildings in my house,
there aren't any foundations.
It was built brick on earth.
It's just slightly wider bricks,
spreader course is there.
It's just stuck straight down on the sand.
A lot of people would be alarmed by that,
but in actual fact, it's been there for over 100 years.
It hasn't moved, it hasn't cracked.
It's unlikely to crack in the future
unless there's something like a leaking drain.
So very important, by the way, that you go around,
you just check your drains are working properly.
But I always say to people,
go and walk around your house when it's pouring with rain
because you learn a lot.
Grab an umbrella, walk around the outside of your house
and just see what's happening
because sometimes you find there's overflowing gutters
where the water's just pouring up over it.
And the first thing you know about it
is you suddenly got a crack in the building
because you've got a leaking drain
or you've just had water pouring down there,
saturated a bit of ground, washing a bit of ground away
and it's undermined your foundations
or in my case, your lack of foundations.
You also get cracks sometimes when you've got a neighbor
who starts doing an extension right next to your house.
They get a bit too greedy
and then they start undermining the foundations.
When I was an emergency plumber,
got a call and he said to me,
can you come out, we're going for a water main.
Back in those days,
they didn't have the kind of provisions they got now
where you could simply screw a coupling on
and repair it yourself.
So he needed my skill, my expertise, if you like,
in using a blow lamp and lead to repair the water main.
I said to him, all right,
I'll come around there and have a look at it.
All these guys were running around with acros and balls
and I said, what's happening?
And he said, just stay there, just stay there for a minute.
I stood there in the back garden
and the owner of the house
was also standing in the back garden.
The whole of the back end of the house
was part in company with the main bit.
There was a crack appearing all the way down here
and it was moving outwards
and you could hear it creaking like the ship's timbers.
Very alarming to watch.
And the guy who owned the house was also alarmed by it.
What these guys had done is they were doing some underpinning
because there had been a small crack there.
So they were doing the underpinning,
taking away sections of the ground, pouring in concrete.
And when that concrete sets,
you then take out the bit in between.
They give you a big schedule for it
and the inspector comes down and looks.
But these guys thought,
oh, we can do this whole job in a week rather than two weeks.
And they dug out a bit more than they should have
to try and pour the concrete in.
Obviously they overdid it and the house started to move
and they ran around and they put in acros
all around the outside of the house,
into the trench on bits of board
just to stop this house from moving away
so they could pour the concrete basically and underpin it.
Little things like that.
If you get underpinners in, if they're good underpinners,
they will do the job properly
and they will stop that happening.
That crack opened up, that building was like that
and they didn't push it back.
They just left it there, filled the crack in,
straightened the floors back up.
That was how it is to this day.
So there's a lot more to say about cracking,
but that's just a brief overview.
If you see an internal crack,
it's very likely to be something like superficial movement,
bit of internal shrinkage.
Don't spend sleepless nights worrying
about cracks in your buildings.
If they look like they're starting to get serious,
get some professional advice.
They will come around and put little telltales on it
and they will monitor the crack
over the course of several months to see what's happening.
If you're gonna do a DIY job on a crack yourself,
just bear in mind what I said about not making matters worse.
I'm Roger Bisbee.
I hope you found that brief overview of cracks illuminating.
And if you've got any crack problems,
send us some photographs.
We love to see a good crack.
