The "concept" of installing a skim coat "patch"

VideoJoeKnows
63 followers
Jun 8, 2026
http://www.VideoJoeKnows.com Once you "know" the "concept" of installing a skim coat patch.........you'll be able to "do" it! If you don't understand the "concept" of installing a skim coat patch, you need to watch this video. A skim coat patch is easy to accomplish......when you "know" how.
http://www.VideoJoeKnows.com
AI Generated·May contain errors
Video Summary
AI GeneratedThis instructional guide explains the process of applying a skim coat to a ceiling patch. The focus is on \"bridging\" the mud over a wide area to eliminate visible bumps and blending the edges seamlessly into the existing surface to ensure the repair is invisible after painting.
Class is open.
I'm gonna take a pencil and I've got a taping coat on here
and then I got a topping coat on there.
Now we're gonna do a skim coat.
But before I do that, I'm just gonna circle this
so it's a little bit easier to see on the video screen.
Okay.
That way you can get the idea of what I'm gonna do next.
I'm not gonna put any mud on here just yet.
I just wanna explain some stuff.
Now, once I get up here and put my mud,
I'm not gonna just put it just beyond that line
and pull here.
What I've gotta do is I gotta bridge that over.
I gotta go from there to about there.
And I wanna float it out way further than this pencil mark
because I don't wanna have a bump up here.
If you can imagine a flat ceiling here
and then if I stop there, if I were to bridge this out,
you would have a bump here
if I didn't put any more sheetrock mud on there.
So what we're doing is this area here
next to the pencil mark, it sticks out down
just a little bit more than the existing ceiling.
Now you can take this whole concept to a wall too
but we're doing a ceiling here so just keep that in mind.
Take the concept to wherever you need to go.
Now, we're gonna take this,
if we were to just put mud right here,
you'd have a hump in your wall or your ceiling, okay?
So once we put mud on here, we're gonna bridge that over.
We're gonna go out probably another eight inches or so.
And what we're gonna do is we're just gonna go from here
eight inches over and we're gonna taper it down
from this point down to nothing over here.
So this patch is gonna end up getting bigger
but that's okay, I don't mind that
because I don't wanna see this when I get ready to paint
and after I get done painting,
oh yeah, there's a patch right there.
So if I bridge this out,
you're not going to see this patch at all.
It's just gonna blend on down.
Now, if you were to put a straight edge
from here all the way out here,
yeah, it's not gonna be perfectly straight
but we wanna trick the eye.
That's what we're going to do.
So, and as we put this up here,
we're not gonna have hardly any mud over at this point.
So when we put our knife up there,
we're gonna put more pressure there
than we are over at this point
so that we're kind of dragging that as we're going.
But we're gonna do that over the entire patch.
We're gonna put some on here, put some on here.
When we get up over here,
when we get over here,
we're gonna go all the way over to about the light fixture,
tampering it over, okay?
So as we do that,
we're gonna have our finger over on this side
because we want this edge,
this edge here up tight to the wall
and we're gonna float this edge just a hair, not very much.
So you're gonna put a little bit more pressure there
as you go, okay?
Does that all make sense?
We're gonna keep doing that over here.
We're gonna float this over here.
We're gonna keep our pressure over here
so that we're pushing up on this point
and then we've got this edge just barely floating over that
and then we'll blend it.
We'll be able to blend it right in, okay?
Let's get to work.
One more thing I want you to grasp here
before we get to work
is when I put this mud on,
I'm not gonna put very much on.
It's called a skim coat.
We're not, we're just, we've already got this flat, okay?
We're gonna clean up the edges here.
We're gonna blend this over.
We're gonna float this over
and we're hardly going to put any mud up there at all
but it's going to bridge this area.
It's going to make this all nice and smooth.
Because we're not putting very much on,
we're gonna prevent any bubbles from coming up on the mud.
Now, if you were to put too much mud up here
and if you think, okay, well, what's the difference?
I got it smooth.
I did what he said.
It's all nice and smooth.
How come I'm getting bubbles?
You know, you're gonna get air bubbles
if you get the mud too thick.
You don't want to get any bubbles on here.
That's why we've got to put a very thin coat over this
and you'll get the hang of it as you go
but if you've noticed,
when you put your first coat of mud on,
you think you got it smooth,
you got some little bubbles in there,
that's okay on your first coat
because you've got a lot of mud up there.
You just naturally, in certain areas,
you're gonna get little tiny bubbles
and then you knock those off
and they make little holes and stuff
but then you can cover them up on your skim coat
and we've got a couple little bubbles up here
that you can't really see that pop.
We've got some little imperfections in this.
This is not perfect where I did the patch, okay,
but all those little voids are gonna be covered up too
when we do this tight skim coat.
So I'm not, when I say we're putting more mud up here,
I don't want you to think
we're gonna put a whole glob of mud up here.
It's gonna be very thin
but we're doing it in such a fashion
where once we get done,
the patch is gonna be about this big, way over here.
We're almost gonna use this line for our other edge,
just beyond that edge.
That's why I wanted to put that pencil mark up there
so that you could see the actual concept
of what I'm doing, okay?
So we're gonna be going way over here
and then when we get over here,
we're gonna go way over,
we're gonna go over about here.
That spot is how big our patch is gonna be,
way over like that, okay?
And then when we sand it, we'll blend it all in
and it's gonna look nice and pretty.
There you go.
Now we're ready to put some mud on the wall,
on our ceiling, I mean.
